Temperature and Humidity Controlled Incubator
Filter
Showing 31–60 of 128 results
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Model | EHSW-6500 |
| Heating Method | Air-Jacketed Heating |
| Cooling Method | Compressor-Based Cooling |
| Humidification Reservoir | Integrated Internal Water Tank |
| Temperature Range (with Humidification) | 5°C to 60°C |
| Temperature Range (without Humidification) | 5°C to 60°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Range | 40–90% RH |
| Humidity Fluctuation | ±5% RH |
| Chamber Capacity | 287 L |
| Internal Chamber Dimensions (W×D×H) | 560 × 790 × 650 mm |
| Power Supply | AC 220 V, 50 Hz |
| Temperature Resolution | 0.1°C |
| Standard Load Shelf | 1 stainless steel tray |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | ZHS-1000HC |
| Refrigeration Method | Compressor-based cooling |
| Water Reservoir Type | External humidification tank |
| Temperature Range (with humidity control) | 0–65 °C |
| Temperature Uniformity | ±0.5 °C at high temperature, ±1 °C at low temperature |
| Humidity Range | 40–95 % RH |
| Chamber Capacity | 1000 L |
| Power Supply | AC 220 V, 50 Hz |
| Heating Element | Nickel-Chromium Alloy Heater |
| Cooling System | Modular compressor unit with start-delay and stop-interval protection |
| Air Circulation | Axial flow fan with optimized internal ducting |
| Control System | Microprocessor-based P.I.D. controller with 30-segment programmable logic |
| Display | Backlit LCD touchscreen interface |
| Safety Features | Over-temperature alarm, parameter memory, power-failure recovery, independent temperature limiter (optional) |
| Construction | Cold-rolled steel outer shell, 304 stainless steel interior chamber, adjustable removable stainless steel shelves |
| Door Design | Dual-door structure with tempered glass inner door and magnetic seal outer door |
| Environmental Compliance | R-134a or R-600a eco-friendly refrigerant |
| Standards Support | Designed for compliance with ISO 14644-1 (cleanroom air classification), USP <1151> (drug stability testing), ICH Q1A–Q1E guidelines, and GLP/GMP-relevant environmental monitoring workflows |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | ZHS-100HC |
| Heating Method | Air-jacketed |
| Cooling Method | Compressor-based |
| Humidification Reservoir | Integrated water tank |
| Temperature Range (with humidification) | 15–45 °C |
| Temperature Range (without humidification) | 10–45 °C |
| Temperature Fluctuation | ±0.5 °C at high setpoints, ±1 °C at low setpoints |
| Temperature Uniformity | ±0.1 °C |
| Humidity Range | 40–95 % RH |
| Humidity Accuracy | ±3 % RH |
| Chamber Capacity | 100 L |
| External Dimensions (W×D×H) | 600×670×1180 mm |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZHS-100M |
| Heating Method | Air-Jacketed |
| Humidity Reservoir | External Water Tank |
| Temperature Range (with Humidification) | RT+10°C to 85°C |
| Temperature Range (without Humidification) | RT+10°C to 85°C |
| Temperature Fluctuation | ±1°C |
| Humidity Range | 80–95% RH |
| Humidity Accuracy | ±3% RH |
| Chamber Capacity | 100 L |
| Internal Dimensions (W×D×H) | 450 × 380 × 590 mm |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZHS-100SC |
| Heating Method | Air-Jacketed Heating |
| Cooling Method | Compressor-Based Refrigeration |
| Humidity Reservoir | External Water Tank |
| Temperature Range (with Humidification) | 15–45 °C |
| Temperature Range (without Humidification) | 10–45 °C |
| Temperature Fluctuation | ±0.5 °C at high setpoints, ±1 °C at low setpoints |
| Temperature Uniformity | ±1 °C |
| Humidity Range | 50–95 %RH |
| Humidity Accuracy | ±3 %RH |
| Chamber Capacity | 100 L |
| Internal Dimensions (W×D×H) | 450 × 380 × 590 mm |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | ZHS-100SC |
| Heating Method | Water-Jacketed |
| Cooling Method | Compressor-Based Refrigeration |
| Humidification Reservoir | External Tank |
| Temperature Range (with Humidification) | 15–45 °C |
| Temperature Range (without Humidification) | 10–45 °C |
| Temperature Fluctuation | ±0.5 °C (high-temp), ±1 °C (low-temp) |
| Temperature Uniformity | ±0.1 °C |
| Humidity Range (SC Series) | 50–95 %RH |
| Humidity Accuracy | ±1 %RH |
| Capacity | 100 L |
| External Dimensions (W×D×H) | 580×610×1180 mm |
| Internal Dimensions (W×D×H) | 450×380×590 mm |
| Power Supply | AC 220 V, 50 Hz |
| Input Power | 1100 W |
| Shelving | 2 adjustable stainless steel shelves |
| Programmable Stages | 30-segment P.I.D controller |
| Display | Touch-enabled LCD interface |
| Safety Features | Over-temperature alarm, compressor delay protection, power-loss recovery, parameter memory |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZHS-150HC |
| Heating Method | Air-Jacketed |
| Cooling Method | Compressor-Based Refrigeration |
| Humidification Water Tank | External Reservoir |
| Temperature Range (with Humidification) | 0–65°C |
| Temperature Range (without Humidification) | 0–65°C |
| Temperature Uniformity | ±0.5°C at High Temp / ±1.0°C at Low Temp |
| Humidity Range | 40–95% RH |
| Humidity Accuracy | ±3% RH |
| Chamber Capacity | 150 L |
| Internal Dimensions (W×D×H) | 480 × 390 × 780 mm |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | ZHS-150HC |
| Heating Method | Air-jacketed |
| Cooling Method | Compressor-based |
| Humidification Reservoir | Integrated water tank |
| Temperature Range (with humidity) | 15–45 °C |
| Temperature Range (dry operation) | 0–65 °C |
| Temperature Fluctuation | ±0.5 °C at high temp / ±1 °C at low temp |
| Temperature Uniformity | ±0.1 °C |
| Humidity Range | 40–95 % RH |
| Humidity Resolution | 0.1 % RH |
| Chamber Capacity | 150 L |
| External Dimensions (W×D×H) | 630×700×1365 mm |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZHS-150SC |
| Heating Method | Air-Jacketed Heating |
| Cooling Method | Compressor-Based Refrigeration |
| Humidity Reservoir | External Water Tank |
| Temperature Range (with Humidification) | 15–45 °C |
| Temperature Range (without Humidification) | 10–45 °C (customizable to 0–65 °C) |
| Temperature Fluctuation | ±0.5 °C at high setpoints |
| Humidity Range | 50–95 %RH |
| Humidity Accuracy | ±3 %RH |
| Capacity | 150 L |
| Internal Dimensions (W×D×H) | 480 × 390 × 780 mm |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZHS-250HC |
| Heating Method | Air-Jacketed Heating |
| Cooling Method | Compressor-Based Refrigeration |
| Humidification Water Tank | External Reservoir |
| Temperature Range (with Humidification) | 0–65°C |
| Temperature Range (without Humidification) | 0–65°C |
| Temperature Fluctuation | ±0.5°C at High Temp / ±1°C at Low Temp |
| Humidity Range | 40–95% RH |
| Humidity Accuracy | ±3% RH |
| Chamber Capacity | 250 L |
| Internal Dimensions (W×D×H) | 580 × 500 × 850 mm |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZHS-250SC |
| Heating Method | Air-jacketed Heating |
| Cooling Method | Compressor-based Refrigeration |
| Humidification Water Tank | External Reservoir |
| Temperature Range (with Humidification) | 15–45 °C |
| Temperature Range (without Humidification) | 10–45 °C (customizable to 0–65 °C) |
| Temperature Fluctuation | ±0.5 °C at high setpoints |
| Humidity Range | 50–95 %RH |
| Humidity Accuracy | ±3 %RH |
| Capacity | 250 L |
| Internal Dimensions (W×D×H) | 580×500×850 mm |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZHS-300HC |
| Heating Method | Air-Jacketed Heating |
| Cooling Method | Compressor-Based Refrigeration |
| Humidification Water Tank | External Reservoir |
| Temperature Range (with Humidification) | 0–65°C |
| Temperature Range (without Humidification) | 0–65°C |
| Temperature Fluctuation | ±0.5°C at High Temp, ±1°C at Low Temp |
| Temperature Uniformity | ±1°C |
| Humidity Range | 40–95% RH |
| Humidity Accuracy | ±3% RH |
| Capacity | 300 L |
| Interior Dimensions (W×D×H) | 580 × 500 × 950 mm |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZHS-300SC |
| Heating Method | Air-jacketed Heating |
| Cooling Method | Compressor-based Refrigeration |
| Humidification Water Tank | External Reservoir |
| Temperature Range (with Humidification) | 15–45 °C |
| Temperature Range (without Humidification) | 10–45 °C (customizable to 0–65 °C) |
| Temperature Fluctuation | ±0.5 °C at high setpoints |
| Humidity Range | 50–95 %RH |
| Humidity Accuracy | ±3 %RH |
| Chamber Capacity | 300 L |
| Internal Dimensions (W×D×H) | 580×500×950 mm |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | ZHS-500HC |
| Heating Method | Air-jacketed |
| Cooling Method | Compressor-based refrigeration |
| Humidification Water Tank | External reservoir |
| Temperature Range (with humidification) | 15–45 °C |
| Temperature Range (without humidification) | 10–45 °C |
| Temperature Uniformity | ±0.5 °C at high setpoints, ±1.0 °C at low setpoints |
| Humidity Range | 40–95 % RH |
| Chamber Capacity | 500 L (standard configuration) |
| External Dimensions (W×D×H) | 720 × 650 × 1380 mm |
| Inner Chamber Material | Stainless steel (AISI 304) |
| Control System | Microprocessor-based PID controller with 30-segment programmable logic |
| Power Supply | 220 V AC, 50/60 Hz |
| Refrigerant | R134a (CFC-free) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | ZHS-500SC |
| Refrigeration Type | Compressor-based |
| Temperature Range (with Humidification) | 15–45 °C |
| Temperature Range (without Humidification) | 10–45 °C |
| Temperature Fluctuation | ±0.5 °C (high-temp), ±1 °C (low-temp) |
| Temperature Uniformity | ±0.1 °C |
| Humidity Range | 50–95 %RH |
| Humidity Accuracy | ±3 %RH |
| Capacity | 500 L |
| Internal Dimensions (W×D×H) | 840×995×1820 mm |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | ZHS-D250HC |
| Refrigeration Method | Compressor-based cooling |
| Temperature Range (with humidification) | 0–65 °C |
| Temperature Range (without humidification) | 10–45 °C |
| Temperature Fluctuation | ±1 °C |
| Humidity Range | 50–95 %RH |
| Humidity Accuracy | ±3 %RH |
| Nominal Capacity | 250 L |
| Internal Dimensions (W×D×H) | 520 × 450 × 1080 mm |
| External Dimensions (W×D×H) | 700 × 630 × 1350 mm |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤±2 °C |
| Humidity Uniformity | ≤±5 %RH |
| Humidity Control Method | Balanced heating/humidification & refrigeration/dehumidification |
| Heating Element | Nickel-Chromium Alloy Heater |
| Humidification Method | Shallow Water Pan Evaporation |
| Temperature Sensor | Pt100 Platinum Resistance Thermometer |
| Humidity Sensor | Dry/Wet Bulb System |
| Controller | Programmable LCD Touchscreen with 30-Stage Ramp/Soak Profile Capability |
| Safety Features | Compressor Overheat Protection, Fan Overheat Protection, Independent Overtemperature Cut-off, Power Failure Recovery, Parameter Memory Retention |
| Insulation | High-Density Polyurethane Foam (≥80 mm thick) |
| Interior Material | SUS304 Mirror-Finish Stainless Steel |
| Door Design | Dual-layer door with tempered glass inner pane and magnetic seal |
| Air Circulation | Axial-flow fan with optimized baffle-guided laminar airflow pattern |
| Brand | Top Cloud-agri |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TC-DC1515 |
| Pricing | Available Upon Request |
| Origin | Zhejiang, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | GHP-50 |
| Price | USD 650 (FOB) |
| Temperature Range (with Humidification) | Not Specified |
| Temperature Uniformity | Not Specified |
| Humidity Range | Not Specified |
| Chamber Capacity | Not Specified |
| Brand | Jihepu |
|---|---|
| Origin | Shandong, China |
| Model | LHS150CL |
| Temperature Range (with humidification) | −10 °C to 85 °C |
| Temperature Uniformity | ±0.3 °C |
| Humidity Range | 45–95 % RH |
| Chamber Capacity | 150 L |
| Power Supply | 220 V, 50 Hz |
| Input Power | 1400 W |
| Interior Dimensions (W×D×H) | 500 × 505 × 600 mm |
| Exterior Dimensions (W×D×H) | 630 × 705 × 1150 mm |
| Standard Shelving | 3 adjustable stainless steel shelves |
| Timer Range | 1–9999 minutes |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.3 °C |
| Humidity Accuracy | ±3 % RH |
| Origin | Italy |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FDM C140 |
| Price Range | USD 6,800–13,600 (FOB Italy) |
| Temperature Range (with Humidification) | 0 °C to +60 °C |
| Temperature Uniformity | ±0.5 °C |
| Relative Humidity Range | 10–98 % RH ±1 % RH |
| Chamber Capacity | 140 L |
| Temperature Resolution & Setpoint Increment | 0.1 °C |
| Temperature Stability | ±0.1 °C |
| Heating Rate | +1.5 °C/min (per IEC 60068-3-5) |
| Cooling Rate | −1.2 °C/min (per IEC 60068-3-5) |
| Noise Level | <55 dB(A) |
| Power Supply | 220–230 V AC, 50 Hz |
| Construction | AISI 304 stainless steel interior & white epoxy-coated galvanized steel exterior |
| Insulation | CFC/HCFC-free polyurethane foam (≥60 mm thickness) |
| Door | Dual-hinge, auto-closing, magnetic gasket seal, thermal lockout above 90 °C |
| Shelving | Adjustable, powder-coated steel racks (2 included, max 5) |
| Controller | Dual microprocessor system (separate PID loops for temperature and humidity), 20-step standard programmability, up to 50 stored programs (optional 200-step extended firmware) |
| Humidification | Low-inertia steam generator, compatible with deionized water or softened water (CaCO₃ ≤400 ppm), supply pressure 1–10 bar |
| Safety | Manual-reset Class 1 overtemperature protection (DIN 12990), password-protected parameter limits, visual/audible alarm on deviation |
| Brand | Grant |
|---|---|
| Origin | United Kingdom |
| Model | ES-20 |
| Speed Range | 50–250 rpm |
| Orbit Diameter | 10 mm |
| Temperature Range | 25–42 °C |
| Temperature Resolution | 0.1 °C |
| Timer Range | 1 min – 96 h |
| Max Load Capacity | 2.5 kg |
| Display | 2-line 16-character LCD |
| Input Power | 230 V, 50–60 Hz |
| Platform Compatibility | Interchangeable (P12-1000, PP-4, P6-250, PUP-12) |
| Brand | Grant |
|---|---|
| Origin | UK |
| Model | ES-80 |
| Oscillation Speed | 50–250 rpm |
| Orbit Diameter | 20 mm |
| Temp. Set Range | 25–80 °C |
| Temp. Control Range | Ambient +5 to 80 °C |
| Temp. Set Resolution | 0.1 °C |
| Timer Range | 1 min – 96 h |
| Max Load Capacity | 8 kg |
| Internal Height | 270 mm |
| Dimensions (W×L×H) | 590×525×510 mm |
| Net Weight | 43 kg |
| Power Supply | 230 V, 50–60 Hz |
| Continuous Operation | Up to 168 h |
| Display | 2-line × 16-character LCD |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | HWS-150 |
| Capacity | 150 L |
| Temperature Range (with humidity active) | 0–50 °C |
| Temperature Uniformity | ±0.5 °C |
| Humidity Range | 30–95 %RH |
| Humidity Control Accuracy | ±2 %RH |
| Construction | Stainless steel interior chamber, triple-pane insulated glass door with mechanical lock |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | HWS-600 |
| Capacity | 600 L |
| Temperature Range (with humidification) | 0–60 °C |
| Temperature Uniformity | ±0.5 °C |
| Humidity Range | 20–95 %RH |
| Humidity Control Accuracy | ±2 %RH |
| Door Configuration | Dual-door, triple-pane insulated glass |
| Interior Material | Stainless steel (AISI 304) |
| Compressor Type | Hermetic refrigeration system with delayed start and high/low pressure protection |
| Humidification Method | Ultrasonic humidifier |
| Air Circulation | Forced convection via stainless steel ducted airflow system |
| Safety Features | Over-temperature protection, sensor fault detection |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | HWS-80 |
| Capacity | 80 L |
| Temperature Range (with humidification) | 0–50 °C |
| Temperature Uniformity | ±0.5 °C |
| Humidity Range | 30–95 %RH |
| Humidity Control Accuracy | ±2 %RH |
| Construction | Stainless steel interior, triple-pane insulated glass door, single-door configuration |
| Humidification Method | Ultrasonic humidifier |
| Cooling System | Hermetically sealed compressor with delayed start and high/low pressure protection |
| Air Circulation | Forced convection via stainless steel ducted airflow system |
| Safety Features | Over-temperature protection, sensor fault detection, door lock mechanism |
| Brand | HePu (Jihepu) |
|---|---|
| Origin | Shandong, China |
| Model | LRHS-150-II |
| Capacity | 150 L |
| Temperature Range (with humidification) | 0–65 °C |
| Temperature Uniformity | ≤ ±0.5 °C |
| Humidity Range | 50–90 %RH (operational only when chamber temperature > 10 °C) |
| Humidity Fluctuation | ±(5–8) %RH |
| Refrigerant | R134a (ozone-friendly) |
| Power Supply | 220 V ±10%, 50 Hz |
| Net Weight | 90 kg |
| External Dimensions (W×D×H) | 590 × 620 × 1400 mm |
| Internal Chamber Dimensions (W×D×H) | 450 × 420 × 850 mm |
| Control System | Digital PID + Fuzzy logic, RS485 interface, LED display (English), programmable up to 30 segments (each segment adjustable to 9999 min/h), setpoint resolution: 0.1 °C / 1 %RH, control accuracy: ±0.1 °C / ±1 %RH |
| Safety Features | Dual-limit temperature protection, independent heater/compressor/humidifier control, water-level sensing, compressor overpressure/overheat protection, auto-fault shutdown with audible alarm, power-loss memory (10-year retention), cold/hot/start-break restart modes |
| Brand | IRM |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | NICH260 |
| Heating Method | Air-jacketed |
| Cooling Method | Compressor-based |
| Humidification Reservoir | Integrated Water Tank |
| Temperature Range (with Humidification) | −10 °C to +90 °C |
| Temperature Range (without Humidification) | −10 °C to +90 °C |
| Temperature Fluctuation | ±0.2 °C |
| Temperature Uniformity | ±0.5 °C (at 20 °C) |
| Humidity Range | 20–98% RH |
| Humidity Accuracy | ±1.2% RH |
| Capacity | 305 L |
| External Dimensions (W×D×H) | 780 mm × 790 mm × 1600 mm |
| Brand | Jihepu |
|---|---|
| Origin | Shandong, China |
| Model | LHS-250CL |
| Temperature Range (with humidification) | −10°C to 85°C |
| Temperature Uniformity | ±0.3°C |
| Humidity Range | 45–95% RH |
| Chamber Capacity | 250 L |
| Power Supply | 220 V, 50 Hz |
| Temperature Fluctuation | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Temperature Control Accuracy | ±0.3°C |
| Humidity Deviation | ±3% RH |
| Input Power | 1800 W |
| Interior Dimensions (W×D×H) | 500 × 505 × 600 mm |
| Exterior Dimensions (W×D×H) | 630 × 705 × 1150 mm |
| Standard Shelving | 3 adjustable stainless steel shelves |
| Timer Range | 1–9999 minutes |
| Brand | JTONE |
|---|---|
| Origin | Zhejiang, China |
| Model | HWS-600 |
| Capacity | 600 L |
| Temperature Range (with Humidification) | 0–50 °C |
| Temperature Uniformity | ±0.8 °C |
| Humidity Range | 30–95 %RH |
| Humidity Control Accuracy | ±2 %RH |
| Construction | Dual-door, triple-pane insulated glass, stainless steel interior chamber with lockable access |
| Compressor | Original Tecumseh (France) hermetic refrigeration unit with delayed start and high/low pressure protection |
| Humidification System | Ultrasonic humidifier with high-reproducibility humidity generation |
| Air Circulation | Forced convection via corrosion-resistant stainless steel ductwork |
| Safety Features | Over-temperature protection, sensor fault detection, automatic shutdown |
| Brand | Ju Chuang Environmental |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | HN-25BS |
| Heating Method | Air-Jacketed |
| Temperature Range (with Humidification) | Not Specified |
| Temperature Range (without Humidification) | RT + 5°C to 60°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Uniformity | ±0.1°C |
| Humidity Range | Not Applicable (Basic Humidification Optional, No Certified Control) |
| Capacity | 25 L |
| External Dimensions | 340 × 364 × 560 mm |
| Inner Chamber Dimensions | 250 × 250 × 250 mm |
| Power Consumption | 0.2 kW |
| Control Resolution | 0.1°C |
| Chamber Material | Brushed Stainless Steel (BS Series) |