Air Generator
Filter
Showing 61–90 of 105 results
| Brand | Parker DH |
|---|---|
| Origin | United Kingdom |
| Model | UHP-10ZA-S, UHP-35ZA-S, UHP-50ZA-S, UHP-75ZA-S, UHP-150ZA-S, UHP-200ZA-S, UHP-300ZA-S |
| Hydrocarbon Content | < 0.1 ppm |
| Output Flow Rate | 1.0–30.0 L/min |
| Dew Point | ≤ –40 °C (typical, after integrated drying) |
| Inlet Connection | 1/8″ or 1/4″ Swagelok® |
| Outlet Connection | 1/8″ or 1/4″ Swagelok® |
| Dimensions (W×H×D) | 340 × 455 × 425 mm (UHP-10ZA-S to UHP-75ZA-S) |
| Weight | 10.2–14.2 kg |
| Filtration Stages | OIL-X EVOLUTION A0 (coalescing), catalytic oxidation unit, OIL-X EVOLUTION AA (0.01 µm final particulate) |
| Brand | PEAK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Intura ZA |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Cracking |
| Output Flow Rates | 1.5 / 3.5 / 7.0 / 15.0 L/min |
| Output Pressure | 100 psi (6.9 bar), Adjustable |
| Total Hydrocarbon Content | <0.05 ppm (as CH₄ equivalent) |
| Dew Point | −35 °C (−31 °F) |
| Standard Warranty | 12 Months |
| Brand | PEAK |
|---|---|
| Origin | United Kingdom |
| Manufacturer | Peak Scientific |
| Product Type | Imported |
| Model | Precision Zero Air 3L |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Cracking |
| Output Flow Rate | 3 L/min |
| Output Pressure | 80 psi |
| Total Hydrocarbon (THC) Content | < 0.05 ppm |
| Particle Filtration | < 0.01 µm |
| Startup Time | 60 min |
| Operating Temperature | 5–35 °C |
| Electrical Requirement | 110–230 VAC, 50/60 Hz |
| Power Consumption | 1.54 kW |
| Dimensions (W×D×H) | 15.1" × 21.3" × 15.9" |
| Weight | 41 kg (90.3 lbs) |
| Noise Level | Low-noise operation |
| Brand | PEAK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Direct Manufacturer |
| Import Status | Imported |
| Model | Precision Zero Air |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Cracking |
| Output Pressure | 80/100 psi |
| Hydrocarbon Content (NMHC) | <0.05 ppm |
| Particle Filtration | <0.01 µm |
| Flow Rate Options | 1.5 L/min |
| Inlet Air Requirement | 120–145 psi, ≥35 L/min |
| Power Supply | 110 V / 230 V, 144 VA |
| Dimensions (H×W×D) | 156 mm × 380 mm × 539.5 mm |
| Brand | PEAK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Solaris Air Compressor |
| Output Flow Rate | 30 L/min |
| Output Pressure | 120 psi (8.27 bar) |
| Dew Point | < 3 °C |
| Voltage Options | 100–115 V AC ±10%, 50/60 Hz / 230 V AC ±10%, 50/60 Hz |
| Power Consumption | 594–1150 W |
| Dimensions (D×W×H) | 416 × 540 × 406 mm |
| Weight | 41.5 kg |
| Brand | PerkinElmer |
|---|---|
| Origin | USA |
| Model | Zero and Ultra Zero |
| Hydrocarbon Removal Principle | Catalytic Oxidation (FID-compatible) |
| Output Flow Rate | 1.5–30.0 L/min (model-dependent) |
| Maximum Continuous Flow | 1.5 L/min (Zero series), up to 30.0 L/min (Ultra Zero series) |
| Hydrocarbon Content | < 0.1 ppm (C1–C6, as methane equivalent) |
| Dew Point | ≤ –70 °C (Ultra Zero, 1.5 L/min model) |
| CO Concentration | < 5 ppm (Ultra Zero, 1.5 L/min) |
| NOₓ Concentration | < 0.1 ppm (Ultra Zero, 1.5 L/min) |
| Power Requirement | 115/230 VAC, 250–500 W (model-dependent) |
| Brand | PhyMetrix |
|---|---|
| Origin | USA |
| Model | DC1000 |
| Output Pressure | 0.3 MPa (recommended) |
| Dew Point | < −80 °C (dp) |
| Inlet Pressure | ≥ 0.8 MPa |
| Operating Temperature | 5–40 °C |
| Storage Temperature | −40–50 °C |
| Electrical Supply | AC 220 V ±10%, 50 Hz |
| Dimensions | 485 × 500 × 260 mm (W × D × H) |
| Weight | 20 kg |
| Inlet/Outlet Fitting | 1/4" Swagelok |
| Brand | PhyMetrix |
|---|---|
| Origin | USA |
| Model | DC2000 |
| Principle | Split-Flow Method |
| Dew Point Range | –80 °C to 0 °C DP |
| Accuracy | ±0.2 °C DP |
| Repeatability | ±0.2 °C DP |
| Stability | ±0.05 °C DP |
| Response Time | <2 min |
| Operating Temperature | 5–40 °C |
| Storage Temperature | –40–50 °C |
| Output Ports | 3 (1 reference + 2 working), 1/4″ 316 stainless steel VCR fittings |
| Adjustable Flow Rate | 0–5 L/min |
| Supply Pressure | 0.4–1.0 MPa |
| Dimensions (W×D×H) | 485×500×260 mm |
| Weight | 20 kg |
| Display | 5.6″ full-color LCD |
| Front Panel | 19″ or 21″ rack-mount compatible |
| Brand | PEAK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Direct Manufacturer |
| Import Status | Imported |
| Model | Precision Zero Air |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Cracking |
| Output Flow Rate | Up to 30 L/min |
| Output Pressure | Up to 100 psi |
| Total Hydrocarbon Content | < 0.05 ppm (as methane equivalent) |
| Dew Point | −30 °C |
| Brand | PEAK |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | Precision Zero Air |
| Hydrocarbon Removal Principle | High-Temperature Catalytic Cracking |
| Maximum Output Flow Rate | 30 L/min |
| Output Pressure | 80 psi |
| Total Hydrocarbon Content | < 0.05 ppm (as methane equivalent) |
| Dew Point | −30 °C |
| Brand | Quanpu |
|---|---|
| Origin | Shanghai, China |
| Model | QP-Plus-A3 |
| Output Flow Rate | 3 L/min |
| Output Pressure | Port A: 0.4 MPa, Port B: 0.5 MPa |
| Air Quality | Oil-free, Dry, Triple-Purified |
| Particle Filtration | ≤0.01 µm |
| Drying Method | Adsorption (Silica Gel) |
| Noise Level | <40 dB(A) |
| Power Supply | 220 V / 50 Hz |
| Max. Power Consumption | 180 W |
| Dimensions (L×W×H) | 550 × 305 × 425 mm |
| Weight | 27 kg |
| Tank Material | Electropolished SS316 |
| Gas Pathway | Electropolished & Ultrasonically Cleaned Stainless Steel Tubing |
| Safety Features | Pressure Relief Valve, High-Sensitivity Pressure Controller, Overcurrent Protection, Manual Vent Valve |
| Certifications | Compliant with ISO 8573-1 Class 1:2:1 (Compressed Air Purity), GLP-Compatible Design |
| Brand | RUNRONG INSTRUMENT |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | A-40Pro |
| Hydrocarbon Content | ≤0.1 ppm |
| Dew Point | −80 °C |
| Output Flow Rate | 0–45 L/min |
| Output Pressure | 0–0.6 MPa |
| Purification Principle | Multi-stage Composite Drying & Hydrocarbon Removal |
| Brand | RUNRONG INSTRUMENT |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | A-Series |
| Pricing | Upon Request |
| Hydrocarbon Removal Principle | Multi-Stage Composite Drying Technology |
| Output Flow Rate | 0–320 L/min |
| Output Pressure | 0–0.7 MPa |
| Dew Point | −80 °C |
| Brand | Sabio |
|---|---|
| Origin | Beijing, China |
| Model | 1001 |
| Output Pressure | 25 psi |
| Standard Flow Rate | 22 L/min (SLP) |
| Condensate Tank Capacity | 3.4 L |
| Air Purity | NO/NO₂/O₃/H₂S/SO₂ < 0.5 ppb, CO < 25 ppb, HC < 200 ppb |
| Dew Point | ≤ −20 °C at 15 L/min |
| Dimensions | 222 mm (H) × 412 mm (W) × 565 mm (D) |
| Power Supply | 220 VAC, 50 Hz |
| Compressor Type | Brushless, Oil-Free |
| Condensate Drain | Automatic or Manual |
| Optional | Built-in CO oxidation catalyst, HC oxidation catalyst, pressure switch, flow meter, rack-mount kit, LED dew point display |
| Brand | Sabio |
|---|---|
| Origin | Beijing, China |
| Model | 2020 |
| Flow Rate | 10 SLPM at 20 psig |
| Purification Targets | NO, NO₂, O₃, SO₂, H₂S < 0.5 ppb (standard) |
| Dew Point | < –40 °C (via integrated permeation dryer) |
| Power Supply | 196–264 VAC, 50–60 Hz |
| Analog Output | 4–20 mA (max. load 750 Ω) |
| Dimensions | 165 mm (H) × 353 mm (W) × 381 mm (D) |
| Weight | 10.4 kg |
| Compliance | Designed for ISO 8573-1 Class 1 compressed air purity |
| Brand | Sabio |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 1001 |
| Output Flow | 22 SLPM at 25 psi |
| Condensate Tank Capacity | 3.4 L |
| Compression Technology | Brushless, Oil-Free Compressor |
| Purification Media | Catalytic beds for NO, NO₂, SO₂, H₂S, and O₃ removal |
| Zero Air Purity | NO, NO₂, O₃, H₂S, SO₂ < 0.5 ppb |
| Optional Methane Catalytic Furnace (Model 1000M) | Microprocessor-controlled proportional heating |
| Dimensions | 13.3 cm H × 48.3 cm W × 38.1 cm D |
| Input Power | 98–132 VAC (optional 196–264 VAC), 360 VA, 50/60 Hz |
| Post-Catalysis Purity | CO < 5 ppb, HC < 0.20 ppb |
| Model 2020 Variant | 10 SLPM at 20 psig |
| Brand | Sciway |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | MIN-AIR |
| Output Flow Rate | 25 L/min |
| Output Pressure | 100 psi |
| Dew Point | −68 °C |
| Power Consumption | 0.5 kW / 220 V |
| Current Rating | 10 A |
| Noise Level | ≤55 dB(A) @ 1 m |
| Weight | 50 kg |
| Dimensions (W×D×H) | 550 × 615 × 480 mm |
| Tank Material | 304 Stainless Steel |
| Filtration | Imported High-Efficiency Coalescing & Desiccant Filters |
| Drying Technology | Integrated Membrane Dryer |
| Hydrocarbon Removal | Non-thermal Catalytic Adsorption |
| Safety Certification | CE-compliant Architecture |
| Compliance | Designed for ISO 8573-1 Class 2:2:2 compressed air quality |
| Output Flow | 0–2000 mL/min @ 0.4 MPa |
|---|---|
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Noise Level | < 35 dB(A) |
| Power Consumption | 175 W |
| Input Voltage | 220 V ±10% |
| Dimensions (W×D×H) | 420 × 260 × 350 mm |
| Net Weight | 22 kg |
| Operating Environment | 0–45 °C, RH ≤85% (non-dusty, non-corrosive atmosphere) |
| Filtration | Dual stainless steel filters + stainless steel air reservoir |
| Sealing Material | Low-sulfur silicone O-rings |
| Output Flow | 0–2000 mL/min @ 0.4 MPa |
|---|---|
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | < 0.003 MPa |
| Noise Level | < 35 dB(A) |
| Power Consumption | 175 W |
| Input Voltage | 220 V ±10% |
| Dimensions (W×D×H) | 400 × 180 × 250 mm |
| Net Weight | ~15 kg |
| Operating Environment | 0–45 °C, RH ≤85% (non-condensing, dust-free, non-corrosive atmosphere) |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | Tianyan |
|---|---|
| Origin | Shandong, China |
| Model | TY-A-3000T |
| Output Flow Rate | 0–3000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | <0.2% |
| Operating Noise | <35 dB(A) |
| Power Supply | 220 V ±10%, 50–60 Hz |
| Ambient Temperature Range | 0–40 °C |
| Relative Humidity | <85% RH |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Range | Full Series |
| Pricing | Available Upon Request |
| Hydrocarbon Output | <0.1 ppm |
| Nitrogen Oxides (NOₓ) Output | <0.1 ppm |
| Carbon Monoxide (CO) Output | <1 ppm |
| Carbon Dioxide (CO₂) Output | <5 ppm |
| Particulate Removal Efficiency (≥0.5 µm) | 99.99% |
| Flow Rate Range | 1.5–30 L/min |
| Brand | Unimicro Technologies |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | Air Generator |
| Price Range | USD 1,400 – 7,200 (FOB) |
| Brand | VICI |
|---|---|
| Origin | USA |
| Model | GC> Ultra-Zero Air Generator |
| Hydrocarbon (HC) Purity | < 0.1 ppm |
| CO₂ Removal | < 5 ppm |
| CO Removal | < 50 ppm |
| NOₓ & SOₓ Removal | < 0.1 ppm |
| Flow Rate Range | 1–30 L/min |
| Maximum Output Pressure | 6.5 barg (95 psig) |
| Technology | Catalytic Oxidation + Multi-Stage Purification |
| Cabinet Mount Option | 19-inch Rack Compatible |
| Brand | VICI |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | 235 |
| Price Range | USD $1,500 – $7,500 |
| Brand | VICI |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Model 345 |
| Price Range | USD 1,400 – 7,200 (based on configuration and regional duties) |
| Brand | VICI |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | 505 |
| Price Range | USD $1,200 – $6,800 |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | ZA-1000 |
| Price | Upon Request |
| Output Hydrocarbon (as CH₄) | <0.1 ppm |
| Max. Input Hydrocarbon (as CH₄) | <100 ppm |
| Max. Input Pressure | 0–0.6 MPa |
| Max. Output Flow Rate | 1000 mL/min |
| Power Supply | 220 V ±10%, 50–60 Hz |
| Power Consumption | 200 W |
| Catalyst Operating Temperature | 450–500 °C (factory-set at 450 °C) |
| Ambient Operating Temperature | 0–40 °C |
| Ambient Relative Humidity | <85 % RH |
| Dimensions (W×D×H) | 400 × 360 × 220 mm |
| Net Weight | ~12 kg |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ZAG Series |
| Pricing | Available Upon Request |
| Brand | CMC (Himsi) |
|---|---|
| Origin | Germany |
| Model | ZA2000T |
| Maximum Flow Rate | 2000 mL/min |
| Outlet Hydrocarbon Concentration | <0.05 ppm CH₄ |
| Inlet Hydrocarbon Limit | ≤100 ppm CH₄ |
| Startup Time | 10 min |
| Power Supply | 230 VAC, 50 Hz |
| Power Consumption | <30 W/h |
| Startup Power | 420 W |
| Dimensions (H×W×D) | 270 × 340 × 460 mm |
| Weight | 13 kg |
| Noise Level | Silent Operation |
| Compliance | Designed for GC-FID zero air supply per ASTM D6216, ISO 8573-1 Class 1, and USP <641> gas purity requirements |
| Brand | Zhonghuipu |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | A-10 |
| Output Flow Rate | 0–10 L/min at 0.4 MPa |
| Output Pressure Range | 0–0.5 MPa (factory-set to 0.4 MPa) |
| Pressure Stability | < ±0.003 MPa |
| Power Consumption | 550 W |
| Dimensions (W×D×H) | 380 × 570 × 440 mm |
| Net Weight | ~35 kg |
| Air Tank Capacity | 8 L |
| Tank Material | 1.5 mm thick 304 stainless steel |
| Cooling & Drying | Dual-fan coil heat exchanger with condensate removal |
| Drainage System | Two-stage automatic condensate discharge |