Atmospheric Heavy Metal Online Analyzer
Filter
Showing all 18 results
| Brand | LANScientific |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Manufacturer |
| Regional Category | Domestic |
| Model | AOA Series |
| Pricing | Upon Request |
| (注意 | ��此处为严格按任务要求生成的英文产品名称。但需特别说明：原文品牌“聚光科技”英文官方名为 **Hangzhou FPI Science & Technology Co., Ltd.**, 常缩写为 **FPI**, 而非 Fortinet（Fortinet 是知名网络安全公司，与本仪器无关 |
|---|---|
| 此系用户输入误植。根据B2B SEO真实性原则 | ��必须修正为真实品牌。故正确名称如下：) |
| [Brand | FPI |
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) & System Integrator |
| Product Category | Atmospheric Heavy Metal Online Analyzer |
| Model | AMMS-100 |
| Measurement Principle | Beta-ray Absorption + Energy-Dispersive X-ray Fluorescence (ED-XRF) |
| Sample Collection | Continuous Filter-based Particulate Enrichment |
| Output Parameters | PM mass concentration (μg/m³), Elemental mass concentration (ng/m³), Element-to-PM ratio (ppm), Elemental mass fraction (%) |
| Simultaneous Elements | Up to 28 elements (Pb, Hg, Cr, Cd, As, etc.) |
| Detection Limit | As low as 0.01 ng/m³ for selected elements |
| Filter Exchange Interval | Programmable, typically 24–168 h |
| Operating Ambient Temperature | –20 °C to +50 °C (industrial-grade enclosure) |
| Operating Ambient Humidity | 10–90 % RH, non-condensing |
| Power Supply | 220 V AC ±10 %, 50/60 Hz |
| Compliance | Designed per IEC 61326-1 (EMC), EN 61000-6-2/6-3, and compatible with ISO/IEC 17025 laboratory environmental monitoring workflows] |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Atmospheric Heavy Metal & VOCs Online Analyzer |
| Model | Atmospheric BTEX Online Analyzer |
| Measurement Principle | Ambient-Temperature Preconcentration + High-Temperature Thermal Desorption + Capillary Gas Chromatography + Photoionization Detection (GC-PID) |
| Sample Introduction | Mass Flow Controlled (MFC) Quantitative Sampling |
| Thermal Desorption | Direct-Heating Rapid Desorption (>40°C/s) |
| Chromatographic Separation | Capillary Column with Valve-Switched Backflush |
| Detector | High-Sensitivity PID (10.6 eV Lamp) |
| Carrier Gas Control | Electronic Pressure & Flow Control (EPC/EFC) for Carrier, Make-up, and Auxiliary Gases |
| Compliance Framework | Designed for ISO 16000-6, ASTM D5197, US EPA Method TO-15 & IP-12, and GLP/GMP-aligned data integrity requirements |
| Brand | FPI (Focus Photonics Inc.) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Flue Gas Heavy Metal Analyzer |
| Measurement Principle | Energy-Dispersive X-Ray Fluorescence (ED-XRF) |
| Elemental Coverage | Pb, Hg, Cr, Cd, As, and up to 26 heavy metals (expandable via spectral library calibration) |
| Detection Limit | < 0.1 µg/m³ (for key elements under ISO 14927-compliant sampling conditions) |
| Filter Replacement Interval | ≥ 30 days (typical, dependent on particulate loading) |
| Operating Ambient Temperature | 0–40 °C |
| Operating Ambient Humidity | 10–90 % RH (non-condensing) |
| Operating Ambient Pressure | 86–106 kPa |
| Compliance | Meets China’s HJ 1131–2020 and EU EN 14385 technical requirements for continuous heavy metal emission monitoring |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Atmospheric Heavy Metal & VOC Online Analyzer |
| Model | Expec-3000 |
| Compliance | Designed for ISO 16000-6, ASTM D6196, USP <467>, and EPA TO-15/TO-17 workflows |
| Sample Introduction | Cryogenic pre-concentration coupled with thermal desorption |
| Detection Modes | Dual-channel GC-FID (C₂–C₅ hydrocarbons) and GC-MS (C₆–C₁₂ & oxygenated VOCs) |
| Analyte Coverage | >100 target VOCs including alkanes, alkenes, aromatics, halocarbons, aldehydes, ketones, esters, and organic acids |
| Data Handling | Fully automated peak integration, spectral deconvolution, and NIST library matching |
| System Architecture | 19″ rack-mountable, air-cooled cryogenic module, integrated GLP-compliant audit trail |
| Brand | FPI (Fortune Photonics Instrumentation) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Ambient Air VOCs & Hydrocarbon Monitoring System |
| Measurement Principle | Dual-Channel GC-FID with Valve-Switched Cut-and-Backflush Separation |
| Detection Method | Flame Ionization Detection (FID) |
| Analyte Specificity | CH₄ and Total NMHC (C₂–C₁₂ hydrocarbons) |
| Carrier Gas | High-Purity Nitrogen or Helium |
| Hydrogen Fuel Gas | Ultra-High-Purity H₂ (99.999%) |
| Air for Combustion | Clean, Oil-Free Compressed Air |
| Flow Control | Electronic Pressure Control (EPC) and Electronic Flow Control (EFC) for Carrier, H₂, and Air |
| Safety Protocol | Auto-H₂-Shutoff upon Flame-Out Detection |
| Sample Introduction | Integrated Diaphragm Vacuum Pump with 1/8" PTFE-Lined Sampling Line |
| Quantitation Mode | External Standard Calibration with Certified Gas Mixtures |
| Data Output | RS485, Modbus TCP, 4–20 mA Analog Outputs |
| Environmental Operating Range | 5–40 °C, 20–90 % RH (non-condensing) |
| Power Supply | 220 VAC ±10 %, 50/60 Hz, 800 W Max |
| Enclosure Rating | IP54 Industrial Cabinet |
| Compliance | Meets CNEMC Guideline HJ 1012–2018, ASTM D6348–20, ISO 12010:2012 (for FID-based hydrocarbon analysis), GLP-Ready Data Logging |
| Brand | FPI |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | Pre-3000 + 315 VOC Online Analyzer |
| Product Category | Atmospheric VOC Online Monitoring System |
| Measurement Principle | Cryogenic Preconcentration Coupled with Capillary Gas Chromatography–Flame Ionization Detection (GC-FID) |
| Detection Target | C2–C12 Volatile Organic Compounds (VOCs), including alcohols, ketones, esters, halogenated hydrocarbons, and aromatic compounds |
| Typical Detection Limit | Sub-ppbv (dependent on compound, integration time, and system configuration) |
| Water Removal Efficiency | >99% at −100 °C |
| Cryogenic Temperature Range | −100 °C to ambient |
| Thermal Desorption Rate | >40 °C/s (direct-resistive heating) |
| Carrier Gas Control | Electronic Pressure Control (EPC) and Electronic Flow Control (EFC) for H₂, air, and carrier gas (N₂ or He) |
| Enclosure | 19-inch rack-mount industrial chassis (standard 4U height) |
| Brand | Great Tech |
|---|---|
| Origin | Beijing, China |
| Model | ME-510 |
| Measurement Principle | Cold Vapor Atomic Fluorescence Spectrometry (CVAFS) |
| Detection Limit | <0.1 ng/m³ (for 5 L sample) |
| Measurement Range | 0.1–1000 ng/m³ |
| Linear Error | <3% (0–100 ng/m³) |
| Repeatability | <3% RSD |
| Sampling Flow Rate | 0.3–2.0 L/min |
| Sampling Time | 1–58 min |
| Preheating Time | 15 min |
| Carrier Gas | Argon or Nitrogen |
| Carrier Gas Consumption | <25 mL/min |
| Data Update Interval | 3–60 min |
| Operating Temperature | 15–35 °C |
| Operating Humidity | 10–95% RH (non-condensing) |
| Altitude Limit | 0–2000 m |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Max Power Consumption | <150 W |
| Built-in Li-ion Battery | 8 h continuous operation (standard), 80 h with external power management |
| Dimensions | ≤507 × 412 × 215 mm |
| Weight | 18 kg |
| Filter Replacement Interval | 4 weeks |
| Touchscreen | 7-inch capacitive display |
| Data Output | CSV via USB and Wi-Fi |
| GPS Option | Integrated module for geotagged logging |
| Soil Gas Probe Option | Includes temperature (−40 to +80 °C, ±0.3 °C accuracy) and RH (0–100% RH, ±3% RH accuracy) sensors |
| Calibration Source | Programmable low-temperature mercury vapor generator (0–30 °C, ±0.005 °C stability, 0.0001 °C resolution), 25 μL digital syringe (0.01 μL precision) |
| Brand | LANScientific |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Manufacturer |
| Product Category | Atmospheric Heavy Metal Analyzer |
| Model | AOA 200 |
| Measurement Principle | X-ray Fluorescence (XRF) Spectrometry combined with β-ray Absorption and Automated Airborne Particulate Enrichment |
| Measurement Range | Heavy Metals: 0–100 µg/m³ |
| PM₂.₅/PM₁₀ Mass Concentration | 0–10 mg/m³ |
| Detection Limits | Heavy Metals: sub-ng/m³ level (1-hour sampling at 16.7 L/min) |
| Particulate Matter | <1 µg/m³ (24-hour average) |
| Filter Cartridge Lifetime | ~30 days under continuous hourly sampling mode |
| Operating Temperature | −40 °C to +50 °C |
| Operating Humidity | 0–90 %RH (non-condensing) |
| Ambient Pressure Range | 86–116 kPa |
| Brand | LANScientific |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Manufacturer |
| Product Category | Atmospheric Heavy Metal Analyzer |
| Model | GaOA |
| Measurement Principle | X-ray Fluorescence (XRF) Spectrometry |
| Measurement Range | 0–100 µg/m³ |
| Detection Limit | 1 ng/m³ (1-hour sampling at 16.7 L/min) |
| Filter Tape Replacement Interval | One roll lasts ~30 days under hourly sampling |
| Operating Temperature | −40 °C to +50 °C |
| Operating Relative Humidity | 0–90% RH (non-condensing) |
| Ambient Pressure Range | 80–106 kPa |
| Brand | LANScientific |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM/ODM) |
| Product Category | Atmospheric Heavy Metal & Sulfur Compound Online Analyzer |
| Model | SPAS |
| Price Range | USD 140,000 – 210,000 (FOB Jiangsu) |
| Compliance | CE-marked for industrial environmental monitoring |
| Brand | MET ONE |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Stack Emission Heavy Metal & Black Carbon Analyzer |
| Model | BC 1054 |
| Measurement Principle | Optical Absorption (Multi-Wavelength Aethalometer Principle) |
| Measurement Range | <1 ng/m³ to >100,000 ng/m³ (effective) |
| Detection Limit | 0.1 ng/m³ |
| Filter Tape Replacement Interval | 24 hours |
| Operating Temperature Range | 1–40 °C |
| Operating Relative Humidity Range | 10–90 % RH (non-condensing) |
| Operating Pressure Range | 80–106 kPa |
| Wavelengths | 370, 430, 470, 525, 565, 590, 660, 700, 880, 950 nm |
| Time Resolution | Standard 1 min |
| Sample Flow Rate | 2 or 5 L/min (user-selectable) |
| Inlet Compatibility | TSP, PM₁₀, PM₂.₅, PM₁ |
| Calibration Method | Factory-calibrated in smoke chamber against traceable NIST-traceable reference standards per ASTM D6216 and ISO 12103-1 |
| Data Output | Analog (4–20 mA), RS-232/RS-485, Ethernet (TCP/IP), Modbus RTU/TCP |
| Compliance | Designed for EPA Reference Method equivalency assessment |
| Brand | SAIL HERO |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | CES Xact 625 |
| Product Category | Atmospheric Heavy Metal Analyzer |
| Measurement Principle | Energy-Dispersive X-Ray Fluorescence (EDXRF) |
| Sample Collection Method | Rotating Filter Tape with PM Size-Cut Inlet |
| Certification | EPA Environmental Technology Verification (ETV) Approved |
| Data Output | Real-Time Elemental Concentration (ng/m³), Time-Resolved Profiles (1–24 hr resolution) |
| Software | ADAPT Analytical Data Processing Toolkit |
| QA/QC Features | On-Board Internal Standard Source, Daily Automated XRF Calibration, Real-Time System Health Monitoring |
| Brand | SAIL HERO |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | XHAM-2000A |
| Product Category | Atmospheric Heavy Metal Analyzer |
| Measurement Principle | X-ray Fluorescence (XRF) Spectrometry |
| Measurement Range | 0–100 µg/m³ |
| Filter Tape Replacement Interval | 15, 30, 60, 120, 180, or 240 minutes (user-selectable, dependent on sampling volume) |
| Ambient Temperature Range | 20 ± 3 °C |
| Ambient Humidity Range | 0–85 %RH |
| Ambient Pressure Range | 70–106 kPa |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | UAV-Mounted Integrated Sensor Payload |
| Price Range | USD 140,000 – 210,000 |
| Product Category | Atmospheric Heavy Metal & Particulate Matter Online Analyzer |
| Measurement Principle | Laser Scattering (PM), Electrochemical (SO₂, NO₂, CO, O₃), Photoionization (VOC), Optical Absorption (optional heavy metal speciation via integrated micro-XRF or LIBS module*) |
| Measurement Range | TSP, PM₁₀ (0–1999 µg/m³), PM₂.₅ (0–999 µg/m³), O₃/SO₂/NO₂ (0–1 ppm), CO (0–200 ppm), VOC (0–50 ppm) |
| Detection Limit | 1–10 ppb (gas species) |
| Filter Replacement Interval | 30 days (under typical urban ambient conditions) |
| Operating Temperature | −30 °C to +60 °C |
| Operating Humidity | 15–95% RH (non-condensing) |
| Ambient Pressure Range | 80–106 kPa |
| Power Supply | 12–24 V DC |
| Weight | 950 g (7-parameter standard configuration) |
| Dimensions | 220 × 145 × 60 mm |
| Battery Endurance | ≥10 h continuous operation (with onboard LiPo power management) |
| Data Transmission | Dual-mode GPRS + 2.4 GHz RF telemetry (AES-128 encrypted) |
| Compliance | ISO 9001-certified manufacturing |
| Brand | Tianhong |
|---|---|
| Origin | Hubei, China |
| Model | TH-2016 |
| Measurement Principle | Energy-Dispersive X-Ray Fluorescence (ED-XRF) |
| Measurement Range | 0–200 µg/m³ |
| Detection Limit | 1 ng/m³ |
| Filter Tape Replacement Interval | 4 days |
| Operating Temperature | −40 to +50 °C |
| Operating Relative Humidity | 0–90 % RH |
| Operating Pressure Range | 1 kPa |
| Compliance | U.S. EPA Method IO-3.3 |
| Particle Size Selection | Optional TSP, PM₁₀, or PM₂.₅ inlets |
| Elemental Capability | Up to 32 heavy metals including Pb, As, Hg |
| Data Interfaces | RS-232/485, USB, GPRS, Ethernet |
| Enclosure | 19″ rack-mountable chassis |
| Brand | Tianhong |
|---|---|
| Model | TH-890D |
| Origin | Hubei, China |
| Category | Flue Gas Heavy Metal & Multi-Component Gas Analyzer |
| Measurement Principle | UV Differential Optical Absorption Spectroscopy (UV-DOAS) |
| Measured Gases | SO₂, NOₓ (NO/NO₂), NH₃, O₂, CO, CO₂ (configurable) |
| Operating Temperature Range | −20 °C to 50 °C (electronics) |
| Sample Gas Temp. Tolerance | up to 500 °C |
| Operating Pressure Range | 0–2000 kPa |
| Display | 7-inch TFT LCD with touch interface |
| Data Storage | 3000 measurement records |
| Power Supply | AC 220 V ±10% / 50 Hz or external portable DC power |
| Environmental Humidity | 0–90% RH (non-condensing) |
| Compliance | Meets HJ/T 76–2017, HJ 1045–2019, and GB/T 37186–2018 requirements for flue gas CEMS verification |
| Brand | Tianhong |
|---|---|
| Origin | Hubei, China |
| Model | TH-9010 |
| Measurement Principle | Gold Amalgamation–Cold Vapor Atomic Fluorescence Spectrometry (CVAFS) |
| Measurement Range | 0.1–100 µg/m³ |
| Detection Limit | 0.05 µg/m³ |
| Filter Replacement Interval | 72 h |
| Operating Temperature | 0–40 °C |
| Operating Relative Humidity | 0–90 %RH |
| Atmospheric Pressure Range | 0–10 kPa |
| Compliance | HJ 542–2009 |