- All
- Favorite
- Popular
- Most rated
| Brand | NeuronBC |
|---|---|
| Model | NBTB |
| Material | Sintered Titanium Powder |
| Filtration Accuracy | 1–50 µm (standard options: 1, 2, 3, 5, 10, 15, 30, 50 µm) |
| Porosity | 35–45% |
| Air Permeability Coefficient | 5×10⁻⁷ – 1×10⁻⁴ L/cm²·min·Pa |
| Minimum Burst Strength | ≥4 MPa |
| End Cap Configurations | Threaded, 222, 226, Flat-Plate |
| Outer Diameter | 30–80 mm |
| Length | 5", 10", 20", 30", 40" |
| Origin | Beijing, China |
| Regulatory Compliance | Designed for USP <788>, ISO 4074, and GMP-compliant bioprocessing environments |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model Variants | BLCC03 (3-Channel), BLCC06 (6-Channel) |
| Price Range | USD 2,800 – 7,000 |
| Material | 316 Stainless Steel |
| Connection to Filter Units | #8 Rubber Stopper |
| Connection to Vacuum Flask | Φ6 mm Silicone Tubing |
| Sterilization | Autoclavable at 121°C for 30 min |
| Dimensions (BLCC03) | 400 × 150 × 160 mm |
| Weight (BLCC03) | 8.0 kg |
| Dimensions (BLCC06) | 820 × 150 × 160 mm |
| Weight (BLCC06) | 12.0 kg |
| Packaging | 1 set per carton |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | PES |
| Price Range | USD 140 – 1,400 (FOB) |
| Membrane Material | Hydrophilic, Asymmetric Sulfonated Polyethersulfone |
| Sterilization Compatibility | Steam-in-Place (SIP) & Autoclave (121°C, 30 min) |
| Max Operating Temperature | 90°C @ 0.20 MPa |
| Forward Pressure Differential | 0.40 MPa (25°C) |
| Reverse Pressure Differential | 0.21 MPa (25°C) |
| Endotoxin Level | <0.25 EU/mL |
| Extractables | <30 mg per 10-inch Φ69 mm cartridge |
| Biocompatibility | USP <88> Class VI In Vivo Reactivity Testing |
| Water Contact Safety | Compliant with GB/T 17219–2001 (Drinking Water Safety) |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (China) |
| Model | PG16300 |
| Price | USD 670 (FOB) |
| Filter Area | 63.5 cm² (Φ100 mm), 132.6 cm² (Φ150 mm), 243.2 cm² (Φ200 mm), 572.2 cm² (Φ300 mm) |
| Max Operating Pressure | 0.8 MPa |
| Sterilization | Autoclavable at 121°C for 30 min |
| Housing Material | ASTM A240 UNS S31603 (316L stainless steel) |
| Gasket Material | Medical-grade silicone rubber |
| Inlet/Outlet | Hygienic clamp-type quick-release fittings (DIN 11851 / ISO 2852 compliant) |
| Surface Finish | Electropolished to Ra ≤ 0.4 µm |
| Chemical Compatibility | Enhanced by PTFE-coated wetted surfaces |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | PTFE |
| Filtration Rating (Liquid) | 0.22 µm & 0.45 µm |
| Filtration Rating (Gas) | 0.01 µm |
| Bubble Point | ≥ 0.08 MPa (95% IPA) |
| Diffusion Flow | ≤ 5.5 mL/min (60:40 IPA:Water at 0.064 MPa) |
| Gas Flow Rate (Hydrophobic, 0.01 µm) | ≥ 6 m³/min (ΔP = 0.015 MPa at 0.13 MPa inlet) |
| Water Flow Rate (Hydrophilic, 0.22 µm) | ≥ 6.89 L/min (ΔP = 0.01 MPa at 0.13 MPa inlet) |
| Max Operating Pressure (Forward) | 0.42 MPa @ 25°C |
| Max Reverse Pressure | 0.21 MPa @ 25°C |
| Max Service Temperature | 65°C @ 0.21 MPa (Standard), 95°C @ 0.1 MPa (High-Temp Grade) |
| Sterilization | 142°C @ 0.276 MPa (Autoclave) |
| Online Steam | 135°C @ 0.1 MPa, 30 min per cycle (up to 160 cycles) |
| Max ΔP for Replacement | 0.20 MPa |
| Housing Material | Polypropylene (PP) |
| Core Support | PP, 304 SS, or 316 SS |
| End Cap & Connector | PP |
| Support Layer | Imported Polyester Nonwoven |
| Seal Materials | Food-Grade EPDM, Silicone, or FKM |
| Effective Filtration Area | 0.70 m² (10-inch format) |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | PTFE-NWF |
| Filtration Rating | 0.2 µm (liquid), <0.01 µm (gas), <0.003 µm (dual-layer) |
| Max Operating Temperature | 90 °C @ 0.20 MPa |
| Sterilization | 121 °C, 30 min (≥50 cycles) |
| Forward Pressure Rating | 0.42 MPa @ 25 °C |
| Reverse Pressure Rating | 0.21 MPa @ 25 °C |
| Endotoxin Level | <0.25 EU/mL |
| Extractables | <10 mg per 10-inch cartridge (Φ69 mm) |
| Chemical Resistance | Broad compatibility with acids, bases, and organic solvents |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | PES |
| Price Range | USD 140 – 1,400 (FOB) |
| Filtration Ratings | 0.1 µm, 0.22 µm, 0.45 µm, 0.65 µm |
| Filter Area | 0.60 m² |
| Bubble Point (Water) | 0.42 MPa @ 0.1 µm |
| Water Flow Rate (ΔP = 0.01 MPa, 1 cP) | ≥5 L/min @ 0.1 µm |
| Max Operating Pressure | 0.42 MPa (forward), 0.21 MPa (reverse) |
| Sterilization | Steam-in-place (SIP) at 121°C, 0.1 MPa, 30 min × 30 cycles |
| Max Temp | 65°C (standard), 95°C (high-temp grade, 0.1 MPa) |
| Housing Material | Polypropylene (PP) or PVDF |
| Core Support | Imported polyester nonwoven |
| Seal Material | Silicone or FKM (Viton®) |
| Chemical Compatibility | Broad—refer to certified compatibility chart |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | 1-Cartridge, 10-inch |
| Price Range | USD 140 – 1,400 |
| Brand | NeuronBC |
|---|---|
| Model | HPP-PP |
| Filter Medium | Imported US-made polypropylene melt-blown nonwoven fabric |
| Filtration Mechanism | Asymmetric depth filtration with graded pore structure |
| Nominal Filtration Ratings | 0.1 µm, 0.22 µm, 0.45 µm, 1.0 µm, 5.0 µm (selectable) |
| pH Stability | 1–14 |
| Max Operating Temperature | 80 °C |
| Sterilization | Steam-in-place (SIP) at 121 °C for 30 min |
| Hot Water Sanitization | 75–85 °C for 30 min |
| Forward Pressure Rating | 0.42 MPa at 25 °C |
| Reverse Pressure Rating | 0.28 MPa at 60 °C |
| Construction | 100% polypropylene (housing, support layer, drainage layer, end caps, O-rings) |
| Sealing Method | Thermal bonding |
| Compliance | FDA-compliant materials per 21 CFR §177.1520 |
| Reusability | Clean-in-place (CIP) compatible with NaOH, citric acid, and isopropanol |
| Brand | NeuronBC |
|---|---|
| Model | PVDF |
| Filter Material | Polyvinylidene Fluoride (PVDF) Microporous Membrane |
| Filtration Area (10″) | 0.60 m² |
| Liquid Sterile Filtration Rating | 0.22 µm |
| Gas Filtration Rating | 0.01 µm |
| Bubble Point (Isopropanol, 0.22 µm) | ≥ 0.065 MPa |
| Air Flow Rate | ≥ 6 m³/min at ΔP = 0.015 MPa (inlet pressure 0.13 MPa) |
| Forward Pressure Drop | 0.42 MPa at 25 °C |
| Reverse Pressure Drop | 0.21 MPa at 25 °C |
| Operating Temperature | ≤ 65 °C (standard), ≤ 95 °C (high-temp grade, 0.1 MPa) |
| Steam Sterilization | 121 °C, 0.1 MPa, 30 min per cycle (validated for ≥ 100 cycles) |
| Housing & Endcap Material | Polypropylene (PP) or PVDF |
| Core Support | Imported Polyester Nonwoven |
| Seal Material | Silicone or FKM (Fluoroelastomer) |
| Chemical Compatibility | Broad resistance to strong acids, aliphatic/aromatic hydrocarbons, ketones, ethers, and halogenated solvents |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | GT-3.0 |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1000 W |
| Test Pressure Range | 300–1500 Pa (adjustable) |
| Leak Rate Detection Limit | ≤10 Pa |
| Noise Level | ≤50 dB(A) |
| Operating Mode | Continuous |
| Weight | ~45 kg |
| Dimensions | 400 mm × 383 mm × 1100 mm |
| User Management | Multi-level Access Control with Electronic Signature Compliance |
| Communication | Customizable Protocol Support for SCADA/DCS Integration |
| Software | PC-based Data Acquisition and Reporting Suite with Audit Trail Capability |
| Brand | NeuronBC |
|---|---|
| Model | NL |
| Filter Material | Nylon 6 / Nylon 66 |
| Pore Sizes | 0.1 µm, 0.22 µm, 0.45 µm, 0.65 µm, 0.8 µm, 1.2 µm |
| Filtration Area | 0.60 m² |
| Bubble Point (0.22 µm) | ≥ 0.28 MPa |
| Bubble Point (0.45 µm) | ≥ 0.18 MPa |
| Max Operating Pressure (Forward) | 0.42 MPa @ 25°C |
| Max Service Temperature | ≤ 65°C @ 0.21 MPa |
| Steam Sterilization | 121°C, 0.1 MPa, 30 min per cycle (up to 30 cycles) |
| Delta-P Replacement Threshold | 0.20 MPa |
| Housing & Endcaps | Polypropylene (PP) |
| Core Support | 304 or 316 Stainless Steel |
| Internal Support Layer | Imported Polyester Nonwoven |
| Seal Materials | Silicone or Fluoroelastomer (FKM) |
| Pure Water Flow Rate (ΔP = 0.01 MPa) | 3.3 L/min (0.22 µm), 5.1 L/min (0.45 µm) |
| Bacterial Retention | ≥ 10⁷ CFU/cm² |
| Integrity Test Method | Forward Flow / Bubble Point |
| Compliance | GMP-compliant manufacturing, pre-sterilized options available, fully traceable lot documentation |
| Origin | Shanghai |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic (China) |
| Model | PP |
| Price Range | USD 140 – 1,400 |
Show next