- All
- Favorite
- Popular
- Most rated
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.0 |
| Instrument Type | Benchtop Laboratory TOC Analyzer |
| Detection Principle | Direct Conductivity Detection |
| Oxidation Method | UV Photocatalytic Oxidation (254 nm) |
| Measurement Range | 0.001–1.0 mg/L (1–1000 ppb) |
| Accuracy | ±3% of reading |
| Resolution | 0.001 mg/L |
| Detection Limit | 0.001 mg/L |
| Repeatability | ±3% RSD |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Sample Temperature Range | 1–99 °C |
| Audit Trail | 16-event log with timestamped entries |
| User Access Control | 4-tier role-based authentication |
| Data Export | USB flash drive support |
| Data Storage Capacity | >5000 test records |
| Display | Color capacitive touchscreen |
| Compliance | Meets Chinese Pharmacopoeia 2020 Edition (ChP) General Chapter <0682>, FDA 21 CFR Part 11 (electronic records & signatures), and GLP/GMP-aligned validation protocols (IQ/OQ/PQ support available) |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.0 |
| Instrument Type | Laboratory TOC Analyzer |
| Detection Principle | Direct Conductivity Detection |
| Oxidation Method | UV Photolysis (185/254 nm) |
| Measurement Range | 1–1000 µg/L (ppb) |
| Accuracy | ±3% of reading |
| Detection Limit | 1 µg/L |
| Resolution | 1 µg/L |
| Repeatability | ≤3% RSD |
| Sample Temperature Range | 1–95 °C |
| Analysis Time | <5 minutes per sample |
| Display | Color TFT Touchscreen |
| Power Supply | 220 V AC |
| Brand | NeuronBC |
|---|---|
| Model | Carbon TA5.0 |
| Origin | Beijing, China |
| Instrument Type | Online TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photolysis (Static UV Oxidation) |
| Measurement Range | 1–1000 ppb (as C) |
| Accuracy | ±5% of reading |
| Detection Limit | 1 ppb (as C) |
| Resolution | 0.1 ppb (display), 1 ppb (reporting) |
| Repeatability | ±5% RSD |
| Conductivity Detection Range | 0.055–6.000 µS/cm |
| Sample Temperature Range | 0–100 °C |
| Ambient Operating Temperature | 5–65 °C |
| Relative Humidity | ≤85% RH (non-condensing) |
| Power Supply | 220 V ±10%, 50 Hz ±10% |
| Response Time | ≤5 min (t₉₀) |
| Drift | ±5% FS/24 h |
| Detector Unit Rated Power | 50 W per unit |
| Communication Interface | RS-485 (up to 48 nodes) |
| Display | 10-inch capacitive touchscreen HMI |
| Data Terminal | TOC-D500 central controller supporting up to 8 distributed TA5.0 sensor units |
| Sample Tubing | PTFE, 1 mm ID, fitted with Swagelok® 50-series quick-connect fittings |
| Data Storage | Internal SD card (≥8 GB), 10-year historical archive (1-min intervals) |
| Output | Real-time analog 4–20 mA, Modbus RTU/TCP, optional thermal printer integration |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TOC-TA-200 |
| Instrument Type | Laboratory TOC Analyzer |
| Detection Principle | Non-Dispersive Infrared (NDIR) Absorption |
| Oxidation Method | High-Temperature Catalytic Combustion |
| Measurement Range | 0–30,000 mg/L |
| Accuracy | ±3% |
| Detection Limit | 1 ppb |
| Resolution | 1 ppb |
| Repeatability | ±3% |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.0 |
| Instrument Type | Laboratory TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photocatalytic Oxidation |
| Measurement Range | 0.001–1.0 mg/L (1–1000 ppb) |
| Accuracy | ±3% |
| Resolution | 0.001 mg/L |
| Detection Limit | 0.001 mg/L |
| Repeatability | ±3% |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Sample Temperature Range | 1–99 °C |
| Data Logging | 5000+ records |
| Audit Trail | 16-event log with timestamped entries |
| User Access Control | 4-tier password authentication compliant with FDA 21 CFR Part 11 |
| Display | Color touchscreen |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-3.0 |
| Instrument Type | Online TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photolysis (185/254 nm) |
| Measurement Range | 0.001–1.0 mg/L (1–1500 ppb) |
| Accuracy | ±3% of reading |
| Resolution | 0.001 mg/L |
| Detection Limit | 1 ppb |
| Repeatability | ±3% RSD |
| Conductivity Range | 0.055–8.000 µS/cm |
| Response Time | ≤5 minutes |
| Sample Temperature Range | 1–95 °C |
| Ambient Operating Temperature | 5–65 °C |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Data Logging | ≥5000 records |
| Audit Trail | 16-event timestamped log |
| User Access Control | 4-tier role-based authentication (compliant with FDA 21 CFR Part 11) |
| Display | Color touchscreen (7-inch) |
| Dimensions (L×W×H) | 300 × 210 × 250 mm |
| Weight | 8.5 kg |
| Enclosure Material | 304 stainless steel |
| IP Rating | IP54 (splash-resistant) |
| Brand | NeuronBC |
|---|---|
| Model | JWG-7A |
| Measurement Principle | Laser Light Obscuration (Single-Particle Counting) |
| Detection Range | 1–500 µm |
| Channel Configurations | ≥5 µm, ≥10 µm, ≥25 µm, 15–25 µm, 25–50 µm, 51–100 µm, >100 µm (user-definable up to 16 channels) |
| Minimum Sample Volume | ≥0.1 mL |
| Particle Count Capacity | 0–9,999,999 particles per sample |
| Concentration Range | 0–10,000 particles/mL |
| RSD | ≤2% (for NIST-traceable standard latex particles ≥1000 particles/mL) |
| Accuracy | ±5% of reference value |
| Channel Resolution | ≥95% (≥10 µm channel) |
| Sampling Time | <10 s for 5 mL |
| Stirring Speed | 0–2000 rpm (adjustable glass propeller stirrer) |
| Operating Temperature | 0–40 °C |
| Power Supply | AC 220 V ±10%, 50 Hz, ≤90 W |
| Dimensions | 390 × 350 × 470 mm |
| Compliance | GB 8368–2005, GB 8368–2018, GB 8368–1998 (Medical Devices & Pharmaceutical Packaging Materials), ISO 21501-4, USP <788> and <789> (with method validation), FDA 21 CFR Part 11-ready (JWG-7DS variant) |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TOC-1.0 |
| Instrument Type | Laboratory Offline TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photocatalytic Oxidation (TiO₂-coated Rotating Quartz Tube + 185/254 nm UV Lamps) |
| Measurement Range | 1–1000 ppb (0.001–1.0 mg/L) |
| Accuracy | ±3% of reading |
| Detection Limit | 0.001 mg/L |
| Resolution | 0.001 mg/L |
| Repeatability | ±3% RSD |
| Sample Temperature Range | 1–99 °C |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Data Storage | ≥5000 test records with time-stamped audit trail |
| Compliance | Meets Chinese Pharmacopoeia (ChP) 2020 Edition, USP <643>, EP 2.2.44, and FDA 21 CFR Part 11 requirements for electronic records and signatures |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.0 |
| Instrument Type | Laboratory TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photocatalytic Oxidation (with TiO₂-coated quartz tube) |
| Measurement Range | 0.001–1.0 mg/L (1–1000 ppb) |
| Accuracy | ±3% |
| Resolution | 0.001 mg/L |
| Detection Limit | 0.001 mg/L |
| Repeatability | ±3% |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Sample Temperature Range | 1–99 °C |
| Data Storage | >5000 records |
| Audit Trail | 16-event log with timestamped traceability |
| User Access Control | 4-tier role-based authentication compliant with FDA 21 CFR Part 11 |
| Display | Color touchscreen interface |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-3.0 |
| Instrument Type | Online TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photolysis (185/254 nm) |
| Measurement Range | 0.001–1.0 mg/L (1–1000 ppb) |
| Accuracy | ±3% of reading |
| Resolution | 0.001 mg/L |
| Detection Limit | 0.001 mg/L |
| Repeatability | ±3% RSD |
| Conductivity Detection Range | 0.055–8.000 µS/cm |
| Response Time | ≤5 minutes |
| Sample Temperature Range | 1–95 °C |
| Ambient Operating Temperature | 5–65 °C |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Data Logging Capacity | >5,000 records |
| Audit Trail | 16-event timestamped log |
| User Access Control | 4-tier role-based authentication (compliant with FDA 21 CFR Part 11) |
| Display | Color TFT touchscreen (7-inch) |
| Dimensions (L×W×H) | 300 × 210 × 250 mm |
| Weight | 8.5 kg |
| Enclosure Material | 304 stainless steel |
| IP Rating | IP54 (splash-resistant) |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-3.0 Online |
| Instrument Type | Online TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photolysis (185/254 nm) |
| Measurement Range | 1–1000 ppb (as C) |
| Accuracy | ±3% of reading |
| Detection Limit | 1 ppb |
| Resolution | 1 ppb |
| Repeatability | ±3% RSD |
| Conductivity Detection Range | 0.055–8.000 µS/cm |
| Sample Temperature Range | 1–95 °C |
| Ambient Operating Temperature | 5–65 °C |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Data Logging | >5000 records with timestamp |
| Audit Trail | 16-event log with time-stamped user actions |
| User Access Control | 4-tier role-based authentication (compliant with FDA 21 CFR Part 11) |
| Display | Color TFT touchscreen (7-inch) |
| Dimensions (L×W×H) | 300 × 210 × 250 mm |
| Weight | 8.5 kg |
| Enclosure Material | 304 stainless steel |
| IP Rating | IP54 (splash-resistant) |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.0/TOC |
| Instrument Type | Portable TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photolysis (185/254 nm) |
| Measurement Range | 1–1000 ppb (as C) |
| Accuracy | ±3% of reading |
| Detection Limit | 1 ppb (as C) |
| Resolution | 1 ppb (as C) |
| Repeatability | ±3% RSD |
| Sample Temperature Range | 1–95 °C |
| Analysis Time | ≤5 min per sample |
| Power Supply | 220 V AC |
| Display | Color TFT Touchscreen |
| Data Storage | Internal memory for ≥10,000 test records |
| Compliance | Meets Chinese Pharmacopoeia 2020 Edition (ChP) Chapter 0682 requirements for purified water and WFI |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TOC100 |
| Instrument Type | Online TOC Analyzer |
| Detection Principle | Non-Dispersive Infrared (NDIR) Absorption |
| Oxidation Method | UV/Persulfate Oxidation |
| Measurement Range | 0–10,000 mg/L |
| Accuracy | ±3% of reading |
| Resolution | 0.001 mg/L |
| Detection Limit | 0.001 mg/L |
| Repeatability | ±3% RSD |
| Compliance | Designed for ISO 8469, ASTM D5905, USP <643>, and EPA Method 415.3 environments |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.0 OL Offline |
| Instrument Type | Laboratory TOC Analyzer |
| Detection Principle | Direct Conductivity |
| Oxidation Method | UV Photocatalytic Oxidation |
| Measurement Range | 1–1000 ppb C |
| Accuracy | ±3% of reading |
| Detection Limit | 1 ppb C |
| Resolution | 1 ppb C (full range) |
| Repeatability | ±3% RSD |
| Compliance | Designed to meet Chinese Pharmacopoeia 2020 Edition (ChP), USP <643>, and EP 2.2.44 requirements for offline water quality testing |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.1 |
| Instrument Type | Benchtop Offline TOC Analyzer |
| Detection Principle | Direct Conductivity Measurement |
| Oxidation Method | UV Photocatalytic Oxidation (185/254 nm) |
| Measurement Range | 1–1000 ppb (0.001–1.0 mg/L) |
| Accuracy | ±3% of reading |
| Detection Limit | 1 ppb (0.001 mg/L) |
| Repeatability | ≤3% RSD |
| Resolution | 0.001 mg/L |
| Analysis Time | <5 minutes per sample |
| Sample Temperature Range | 1–99 °C |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Data Logging | ≥5000 records with time-stamped audit trail (16 event categories) |
| User Access Control | 4-tier password-protected authentication |
| Compliance | Designed to support FDA 21 CFR Part 11, USP <643>, EP 2.2.44, and ChP 2020 Edition General Chapter 0682 requirements |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-1.0 Offline |
| Instrument Type | Laboratory TOC Analyzer |
| Detection Principle | Direct Conductivity Detection |
| Oxidation Method | UV Photocatalytic Oxidation (TiO₂-coated Quartz Tube) |
| Measurement Range | 1–1000 ppb (0.001–1.0 mg/L) |
| Accuracy | ±3% of reading |
| Resolution | 1 ppb (0.001 mg/L) |
| Detection Limit | 1 ppb (0.001 mg/L) |
| Repeatability | ≤3% RSD |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Sample Temp. Range | 1–99 °C |
| Data Storage | >5000 records |
| Audit Trail | 16-event log with timestamped traceability |
| User Access Control | 4-tier role-based authentication compliant with FDA 21 CFR Part 11 |
| Display | Color TFT touchscreen |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TOC TA-1.0 |
| Instrument Type | Benchtop Laboratory TOC Analyzer |
| Detection Principle | Direct Conductivity Detection |
| Oxidation Method | UV Photocatalytic Oxidation (TiO₂-coated Quartz Tube) |
| Measurement Range | 1–1000 ppb (0.001–1.0 mg/L) |
| Accuracy | ±3% |
| Detection Limit | 0.001 mg/L |
| Repeatability | ±3% |
| Resolution | 0.001 mg/L |
| Analysis Time | <5 minutes per sample |
| Sample Temperature Range | 1–99 °C |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Data Storage | >5000 records |
| Audit Trail | 16-event log with timestamped entries |
| User Access Control | 4-tier role-based authentication |
| Compliance | FDA 21 CFR Part 11, Chinese Pharmacopoeia (2020 Ed.), ISO 8573-7, USP <643> |
| Connectivity | USB for data export, optional RS-232/485 |
| Display | Color touchscreen interface |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TOC5.0 |
| Instrument Type | Online TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photolysis (Static UV Oxidation) |
| Measurement Range | 1–1000 ppb (as C) |
| Accuracy | ±5% of reading |
| Resolution | 0.001 mg/L |
| Detection Limit | 0.001 mg/L |
| Repeatability | ±5% RSD |
| Sample Temperature Range | 0–100 °C |
| Conductivity Range | 0.055–6.000 µS/cm |
| Environmental Operating Temperature | 5–65 °C |
| Relative Humidity | ≤85% RH |
| Power Supply | 220 V ±10%, 50 Hz ±10% |
| Response Time | <5 minutes |
| Drift | ±5% FS/24 h |
| Rated Power per Detection Unit | 50 W |
| Sample Inlet/Outlet Tubing | 1 mm ID PTFE tubing with 50-series quick-connect fittings |
| Communication Interface | RS-485 (supports up to 8 detection units per TA-D500 data terminal) |
| Display | 10-inch capacitive touchscreen HMI |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-3.0 Online |
| Instrument Type | Online TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photolysis (185/254 nm) |
| Measurement Range | 1–1000 ppb (as C) |
| Accuracy | ±3% of reading |
| Resolution | 1 ppb |
| Detection Limit | 1 ppb |
| Repeatability | ≤3% RSD |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Conductivity Detection Range | 0.055–8.000 µS/cm |
| Sample Temperature Range | 1–95 °C |
| Ambient Operating Temperature | 5–65 °C |
| Data Logging Capacity | >5000 records |
| Audit Trail | 16 configurable event logs with timestamped access |
| User Access Control | 4-tier role-based authentication (username/password), compliant with FDA 21 CFR Part 11 |
| Display | Color TFT touchscreen (7-inch) |
| Dimensions (L×W×H) | 300 × 210 × 250 mm |
| Weight | 8.5 kg |
| Enclosure Material | 304 stainless steel |
| IP Rating | IP54 (splash-resistant) |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-2.0 |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photolysis |
| Measurement Range | 1–1000 ppb |
| Accuracy | ±3% |
| Resolution | 1 ppb |
| Detection Limit | 1 ppb |
| Repeatability | ±3% |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Conductivity Range | 0.055–8.000 µS/cm |
| Sample Temp. | 1–95 °C |
| Ambient Temp. | 5–65 °C |
| Data Storage | >5000 records |
| Audit Trail | 16-event log with timestamped queries |
| User Access | 4-tier role-based authentication compliant with FDA 21 CFR Part 11 |
| Display | Color touchscreen |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-5.0 |
| Instrument Type | Online TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photolysis (Static Oxidation) |
| Measurement Range | 1–1500 ppb (0.001–1.5 mg/L) |
| Accuracy | ±5% |
| Detection Limit | 1 ppb (0.001 mg/L) |
| Resolution | 1 ppb |
| Repeatability | ±3% |
| Sample Temperature Range | 0–100 °C |
| Conductivity Range | 0.055–6.000 µS/cm |
| Ambient Operating Temperature | 5–65 °C |
| Relative Humidity | ≤85% |
| Power Supply | 220 V ±10%, 50 Hz ±10% |
| Response Time | <5 minutes |
| Drift | ±5% FS/24 h |
| Rated Power per Sensor Unit | 50 W |
| Communication Interface | RS-485 |
| Display | 10-inch capacitive touchscreen |
| Sample Inlet/Outlet Tubing | 1 mm ID PTFE tubing with 50-quick-connect fittings |
| Data Terminal | TOC-S500 (supports up to 8 TA-5.0 sensor units) |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | T 2.0 |
| Instrument Type | Laboratory TOC Analyzer |
| Detection Principle | Direct Conductivity Method |
| Oxidation Method | UV Photolysis (185/254 nm) |
| Measurement Range | 0.1–1000 µg/L (ppb) |
| Accuracy | ±3% of reading |
| Detection Limit | 0.1 µg/L |
| Resolution | 0.001 µg/L |
| Repeatability | ≤3% RSD |
| Response Time | <5 minutes |
| Sample Temperature Range | 1–95 °C |
| Power Supply | 220 V AC |
| Display | Color TFT Touchscreen |
| Data Storage | Internal high-capacity flash memory with timestamped audit trail |
| Compliance | Meets Chinese Pharmacopoeia (ChP) 2020 Edition Chapter 0682 requirements for TOC testing |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-2.0 |
| Instrument Type | Online/Offline TOC Analyzer |
| Detection Principle | Direct Conductivity Measurement |
| Oxidation Method | UV Photolysis (185/254 nm) |
| Measurement Range | 0.001–1.0 mg/L (1–1000 ppb) |
| Accuracy | ±3% of reading |
| Resolution | 0.001 mg/L |
| Detection Limit | 0.001 mg/L |
| Repeatability | Continuous analysis mode |
| Sample Temperature Range | 1–95 °C |
| Ambient Operating Temperature | 5–65 °C |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Conductivity Detection Range | 0.055–8.000 µS/cm |
| Response Time | ≤5 minutes |
| Data Storage Capacity | >5000 records |
| Audit Trail | 16-event log with timestamped entries |
| User Access Control | 4-tier role-based authentication (username/password), compliant with FDA 21 CFR Part 11 |
| Display | Color touchscreen interface |
| Connectivity | Ethernet port, RS-232 serial port, digital power output port |
| Dimensions (L×W×H) | 400 × 240 × 270 mm |
| Weight | 8.5 kg |
| Brand | NeuronBC |
|---|---|
| Origin | Beijing, China |
| Model | TA-2.0 |
| Instrument Type | Online/Offline Dual-Mode TOC Analyzer |
| Detection Principle | Direct Conductivity Measurement |
| Oxidation Method | UV Photolysis (185/254 nm) |
| Measurement Range | 0.001–1.0 mg/L (1–1000 ppb) |
| Accuracy | ±3% of reading |
| Resolution | 0.001 mg/L |
| Detection Limit | 0.001 mg/L |
| Repeatability | ±3% RSD |
| Conductivity Detection Range | 0.055–8.000 µS/cm |
| Analysis Time | ≤5 min per cycle |
| Sample Temp. Range | 1–95 °C |
| Ambient Operating Temp. | 5–65 °C |
| Power Supply | 100–240 VAC, 50 Hz, 120 W |
| Dimensions (L×W×H) | 400×240×270 mm |
| Weight | 8.5 kg |
| Data Storage | ≥5000 records |
| Audit Trail | 16-event log with timestamped entries |
| User Access Control | 4-tier role-based authentication |
| Compliance | FDA 21 CFR Part 11, GLP/GMP-ready |
Show next