Generic
Filter
Showing 3211–3240 of 5744 results
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DOT-7 |
| Price Range | USD 42,000 – 70,000 |
| Light Source | Broadband White LED |
| Spectral Range | 380–720 nm (standard), 390–730 nm (optional) |
| Wavelength Interval | 10 nm |
| Sensitivity Adjustment | Auto-Gain Calibration |
| Optical Configuration | Dual-Beam with Top-Illumination Integrating Sphere |
| Sample Thickness Capacity | Up to 30 mm |
| Polarization Measurement Capability | Crossed-Nicol configuration supported |
| Detection Sensitivity | 10× higher than predecessor model (DOT-6) |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | DOT-3C |
| Price Range | USD 42,000 – 70,000 |
| Light Source | Tungsten-Halogen Lamp |
| Spectral Range | 380–720 nm (standard), 390–730 nm (optional) |
| Wavelength Interval | Fixed at 10 nm |
| Calibration & Sensitivity Adjustment | Manual SPAN Knob |
| Sample Height Limit | ≤30 mm |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DOT-41 |
| Price Range | USD 70,000 – 112,000 (FOB Japan) |
| Optical Configuration | Dual-beam, integrating sphere |
| Wavelength Range | 380–780 nm (standard) |
| Wavelength Interval Options | 1, 5, 10, 20, or 50 nm |
| Sensitivity Enhancement | Optional 100× gain module for low-transmittance and polarization degree measurement |
| Sample Chamber Depth | 15 cm from optical axis to sample stage |
| Maximum Sample Width | 30 cm (centered on stage) |
| Illumination Geometry | Diffuse illumination via integrating sphere |
| Polarization Measurement Capability | Yes, with crossed-Nicol configuration |
| Calibration Method | Manual SPAN knob adjustment |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CryoSystem 750 / 2000 / 4000 / 6000 |
| Price Range | USD $2,500 – $6,200 |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Numbers | SC3/3, SC8/5, SC11/17, SC16/11, SC Millennium 20, SC20/20, SC33/26, SC36/32 |
| Price Range | USD $1,400 – $2,800 |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MVE XC |
| Price Range | USD $1,300 – $2,600 |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MX-6 |
| Pricing | Available Upon Request |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | MX100-4A |
| Instrument Type | Microplate Shaker |
| Timer Range | 99 h 59 min |
| Oscillation Frequency | 200–1500 rpm (standard), 300–1000 rpm (full load) |
| Oscillation Amplitude | 3 mm horizontal orbital |
| Temperature Control | Ambient only |
| Plate Capacity | 4 standard microplates (96-well, 384-well, 24-/48-well plates) |
| Dimensions | 280 × 270 × 110 mm |
| Weight | 7 kg |
| Motor Type | Brushless DC motor |
| Display | LED digital display |
| Alarm | Audible end-of-program signal |
| Optional Accessory | 1.5/2.0 mL centrifuge tube holder |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MX4 iQuad |
| Pricing | Available Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | MyoVIEW II |
| Pricing | Available Upon Request |
| [Origin | Spain |
|---|---|
| Model | VK2000 |
| Power Supply | 100–240 V, 50–60 Hz |
| Operating Temperature | 10–40 °C |
| Relative Humidity | < 80 % |
| Rotational Speed | 200 rpm |
| Rotor Type | Standard ASTM Krebs (KU) Rotor |
| Weight | 8.5 kg |
| Interface | RS232 |
| Viscosity Range | KU: 40.2–141.0 (±0.1 KU) |
| g | 32–1099 (±1.0 g) |
| cP | 27–5274 (±5 cP) |
| Accuracy | ±1% of full scale |
| Repeatability | ±0.2% |
| Compliance | ASTM D562-01, ASTM D856, ASTM D1131] |
| Origin | Spain |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | VR3000 |
| Pricing | Upon Request |
| Origin | Sichuan, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | MYS-1 |
| Pricing | Upon Request |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | N-4L |
| Price Range | USD 150–2,500 (FOB Yokohama) |
| Test Target | Somatic Cell Count (SCC) & Electrical Conductivity (EC) Correlates for Subclinical Mastitis |
| Automation Level | Semi-Automatic |
| Analysis Time | ≤3 seconds per quarter |
| Detection Principle | Dual-Parameter Impedance Spectroscopy & Conductivity Ratio Analysis |
| Repeatability | CV ≤3.2% (n=20, pooled quarter milk samples) |
| Accuracy | ±0.1 unit in normalized conductivity ratio (dimensionless index) |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | N-8α |
| Price | Upon Request |
| Scale Range | 0.0–8.0 % Brix |
| Minimum Scale Division | 0.1 % Brix |
| Dimensions | 4 × 4 × 21 cm |
| Weight | 260 g |
| Dedicated Accessory | RE-2360-51L Daylight Plate with Calibration Screw |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | N-GT Series |
| Pricing | Available Upon Request |
| Origin | Czech Republic |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | N-Pen |
| Pricing | Upon Request |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | N4R-1.0-50 |
| Price Range | USD 4,200–7,000 (FOB) |
| Water Flow Rate | 100–1000 L/h |
| Controllable Resistivity Range | 0.15–1.7 MΩ·cm |
| Control Accuracy | ±0.03 MΩ·cm |
| Max. Inlet Water Pressure | 0.5 MPa |
| Pressure Drop | 0.06 MPa at 3000 L/h |
| Connection Ports | 3/4″ female screw |
| Power Supply | AC 100–130 V / 220–240 V, 50/60 Hz, single-phase, 1 A |
| Enclosure Type | Rack or Cabinet |
| H₂O₂-Compatible Sterilization | Yes (3% hydrogen peroxide) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | N9040B UXA X-Series |
| Pricing | Available Upon Request |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | N962A |
| Instrument Type | Hot-Wire Anemometer |
| Resolution | 0.01 m/s |
| Accuracy | ≤ ±5% |
| Operating Temperature | 0–40 °C |
| Operating Relative Humidity | 0–85% RH |
| Measurement Range | 0–30 m/s (auto-ranging across 0–10 / 0–20 / 0–30 m/s) |
| Power Supply | Rechargeable Ni-MH Battery (memory-free) |
| Display | Large-format LED |
| Sensor Element | Thin-film Platinum RTD (ceramic substrate) |
| Compliance | Designed for GLP-aligned field use in occupational & environmental monitoring |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | NA-300 |
| Pricing | Available Upon Request |
| Nitrogen Purity | <3 ppm O₂, Dew Point −56 °C |
| Nitrogen Flow Rate | 0–300 mL/min |
| Nitrogen Output Pressure | 0.4 MPa |
| Zero-Air Flow Rate | 0–2000 mL/min |
| Zero-Air Output Pressure | 0.4 MPa |
| Power Consumption | 275 W |
| Dimensions (W×D×H) | 470 × 260 × 380 mm |
| Net Weight | ~28 kg |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | NA-500 |
| Pricing | Available Upon Request |
| Nitrogen Purity | <3 ppm O₂, Dew Point −56 °C |
| Nitrogen Flow Rate | 0–500 mL/min |
| Nitrogen Output Pressure | 0.4 MPa |
| Zero-Air Flow Rate | 0–2000 mL/min |
| Zero-Air Output Pressure | 0.4 MPa |
| Power Consumption | 275 W |
| Dimensions (W×D×H) | 470 × 260 × 380 mm |
| Net Weight | ~28 kg |
| Origin | Germany |
|---|---|
| Type | Box-Type Muffle Furnace |
| Max Operating Temperature | 1400 °C / 1500 °C / 1600 °C |
| Temperature Uniformity | ±1 °C |
| Heating Element | Silicon Carbide (SiC) Rods |
| Internal Chamber Dimensions | 170 × 290 × 170 mm |
| Max Power Input | 13.0 kW |
| Ramp Time to Max Temperature | ≤45 min |
| Construction | Dual-Wall Stainless Steel Housing with Ceramic Fiber Insulation |
| Compliance | EN 60519-2 (Thermal Protection Class 2), CE Marked |
| Origin | Germany |
|---|---|
| Type | Box-type Muffle Furnace |
| Max. Temperature | 1200 °C |
| Temperature Uniformity | ±1 °C |
| Heating Method | Embedded Resistance Wire in Ceramic Heating Panels |
| Internal Volume | 1–40 L |
| Power Rating | 1.2–6 kW |
| Ramp Time to Max Temp | ≤30 min |
| Construction | Double-walled Stainless Steel (V2A) Housing with Vacuum-Insulated Fiber Modules |
| Door Options | Flip-up or Lift-up Configuration |
| Safety Compliance | EN 60519-2, Thermal Protection Class 2 |
| Software Control | Compatible with Controltherm MV Process Management Suite |
| Origin | Germany |
|---|---|
| Type | Box-Type Muffle Furnace |
| Max. Temperature | 1100 °C or 1200 °C |
| Temperature Accuracy | ±1 °C |
| Max. Power | 6 kW |
| Heating Rate to Max. Temperature | ≤40 min |
| Heating Method | Dual-Side Ceramic Heating Plates (Triple-Side for L24/11–LT40/12 models) |
| Internal Volume | 1–40 L |
| Compliance | EN 60519-2, IEC 61000-6-3, CE Marked |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | N 30/45H |
| Instrument Type | Box-Type Muffle Furnace |
| Max. Operating Temperature | 450 °C |
| Temperature Uniformity | ±3 K (within working chamber, per DIN 17052-1) |
| Control Accuracy | ±1 °C |
| Max. Power Consumption | 9 kW |
| Heating Rate to Max. Temp. | ≤30 min |
| Heating Element | Resistance Wire (NiCr Alloy) |
| Internal Chamber Volume Options | 5–500 L |
| Construction | Stainless Steel Inner Chamber (AISI 304), Reinforced Insulation, Horizontal Air Circulation System |
| Compliance | DIN 17052-1, EN 61000-6-3, EN 61000-6-4 |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Range | N 7/H – N 87/H |
| Instrument Type | Box-Type Muffle Furnace |
| Max Temperature | 1280 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 20 kW |
| Ramp Time to Max Temp | 120 min |
| Heating Configuration | Triple-Sided (Left, Right & Bottom) |
| Internal Volume | 7–61 L |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | R 50/250/12 |
| Instrument Type | Tube Furnace |
| Max Temperature | 1200 °C or 1300 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 6.5 kW |
| Heating Time to Max Temp | 60 min |
| Heating Method | Resistance Wire |
| Tube Outer Diameter Range | 50–120 mm |
| Electrical Supply | 1-phase or 3-phase, depending on model |
| Weight | 20–230 kg (model-dependent) |
| Compliance | EN 60519-2 (thermal protection class 2), CE-marked |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | RHTC 80-230/15 / RHTC 80-710/15 |
| Temperature Range | Up to 1500 °C |
| Temperature Uniformity | ±10 K over specified hot zone length |
| Control Accuracy | ±1 °C |
| Heating Method | Silicon Carbide (SiC) Rod Heaters |
| Maximum Power | 11.7 kW |
| Chamber Inner Diameter | 80 mm |
| External Dimensions (W×D×H) | up to 1070×430×580 mm |
| Weight | up to 90 kg |
| Electrical Supply | 3-phase, 400 V AC |
| Thermal Insulation | High-performance ceramic fiber module system |
| Safety Compliance | EN 60519-2 Class 2 Overtemperature Protection |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Range | RS 80/300/11 – RS 170/1000/13 |
| Heating Method | Resistance Wire |
| Max Temperature | 1100 °C or 1300 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 12.6 kW |
| Internal Tube Diameter | 80 mm to 170 mm |
| Standard Tube Material | C 530 (Alumina-Rich Ceramic, Suitable for Air Atmosphere) |