INSMENT (Shanghai Jinsen)
Filter
Showing all 7 results
| Brand | Insment (Shanghai Jinsen) |
|---|---|
| Origin | Shanghai, China |
| Model | KS-1084B |
| Input Voltage | 220 V / 50 Hz |
| Control System | PLC + Touchscreen HMI |
| Drive Mechanism | Stepper Motor |
| Scratch Speed | 0–25 mm/s (adjustable) |
| Cycles | 0–9999 (presettable) |
| Scratch Spacing | 1–19 mm (adjustable) |
| Test Table Dimensions | 200 × 200 mm |
| Temperature Range | Ambient to 80 °C |
| Normal Load | 10 N ± 0.5 N |
| Indenter | Hardened steel needle, conical tip, apex angle 40°, spherical tip radius 0.25 mm ± 0.02 mm (replaceable) |
| Scratching Angle | 80° or 85° relative to specimen surface (selectable) |
| Maximum Scratch Length | 200 mm (adjustable) |
| Maximum Lateral Travel | 200 mm (adjustable) |
| Indenter Material Option | Tungsten carbide (available as upgrade) |
| Brand | INSMENT (Shanghai Jinsen) |
|---|---|
| Origin | Shanghai, China |
| Model | KS-181D |
| Compliance | MT181, MT113, GB/T 3685–1996, GB 16413–1996 |
| Fuel | 95% industrial ethanol + 5% methanol mixture |
| Flame temperature | 960 ± 60 °C |
| Flame length | 150–180 mm |
| Burn time range | 0–999.9 s (±0.01 s accuracy) |
| Specimen dimensions | 25-mm-wide ring cut from 600-mm-long plastic pipe (≥50 mm diameter) |
| Power supply | AC 220 V |
| Chamber dimensions | 1120 mm (W) × 580 mm (D) × 1350 mm (H) |
| Exhaust port | Φ100 mm |
| Weight | ~50 kg |
| Brand | INSMENT (Shanghai Jinsen) |
|---|---|
| Origin | Shanghai, China |
| Model | KS-2054A |
| Compliance Standards | GB 31241–2014, UL 1642, UL 2054, SJ/T 11170–1998, SJ/T 11169–1998, GB 18282–2013, GB 8897.4 |
| Burner | Imported ED&D Bunsen burner (ID 9.5 mm, length 100 mm) |
| Flame Application Time | 0–999.9 s ±0.1 s |
| Flame Afterburn Time | 0–999.9 s ±0.1 s |
| Adjustable Flame Height | 10–75 mm ±2 mm |
| Test Rod | 6.35 mm × 355.6 mm |
| Octagonal Test Enclosure | 305 mm (W) × 355 mm (D) × 610 mm (H) |
| Control System | PLC + TFT true-color LCD interface with remote ignition (≤8 m range) |
| Fuel Requirement | Methane ≥98% purity (user-supplied) |
| Power Supply | AC 220 V / 50 Hz |
| Dimensions (L×W×H) | 1200 × 800 × 1250 mm |
| Sample Capacity | Single-cell to large-format Li-ion batteries and battery modules |
| Safety Enclosure | Perforated stainless-steel mesh screen (20 holes per 25.4 mm, wire diameter 0.43 mm), mounted over 102 mm aperture in test platform |
| Brand | Insment (Shanghai Jinsen) |
|---|---|
| Origin | Shanghai, China |
| Model | KS-50BH |
| Control System | PLC-based with 7-inch Weinview TFT touchscreen (16:9) |
| Flame Sources | ASTM D5025-compliant Bunsen burner (50 W & 500 W configurations) |
| Flame Calibration | Copper block thermocouple verification per IEC 60695-11-xx |
| Gas Supply | High-purity methane (≥98%, 37.1 MJ/m³), regulated via Matheson/Dwyer flow control system |
| Temperature Sensing | K-type armored thermocouple (Φ0.5 mm, 1100 °C max), calibrated copper blocks (20 mm & 125 mm) |
| Timing Resolution | 0.1 s, dual-event and afterflame duration logging |
| Test Chamber Volume | ≥0.75 m³, matte black interior |
| Power Supply | 220 V, 50–60 Hz, 0.5 kVA |
| Compliance | UL 94, ASTM D5025/D5207, IEC 60695-11-3/4/10/20, ISO 9772/9773/1210, GB/T 2408/5169.16/5169.17/8332 |
| Brand | INSMENT (Shanghai Jinsen) |
|---|---|
| Origin | Shanghai, China |
| Model | KS-57BS |
| Control System | PLC-based intelligent control |
| Display | 7-inch Widescreen TFT color touchscreen (16:9, Weinview) |
| Ignition | Automatic piezoelectric ignition |
| Burner | 9.5 mm inner diameter stainless steel gas burner |
| Flame height adjustment | 20 ± 1 mm (calibrated with copper plate) |
| Specimen support | Dual U-shaped corrosion-resistant metal frames with 6-pin alignment and 0.25 mm diameter heat-resistant support wires spaced at 25 mm intervals |
| Specimen mounting height | 178 mm above combustion chamber base |
| Flame application time | 0–999.9 s ± 0.1 s (adjustable and programmable) |
| Afterflame time measurement | 0–999.9 s ± 0.1 s (auto-recorded, manual pause enabled) |
| Gas supply | Liquefied petroleum gas (LPG) or alternative fuel gas with calorific value 35–38 MJ/m³ (e.g., natural gas, town gas) |
| Chamber dimensions | 1200 mm (L) × 650 mm (W) × 1500 mm (H) |
| Exhaust port | Φ100 mm |
| Compliance | GB 8410–2006, FMVSS 302, ISO 3795, ASTM D5132, DIN 75200, TL 1010, GM 6090M, GM 9070P, JIS D 1201, JASO M403, QB/T 2729–2005 |
| Reporting | Auto-pass/fail judgment, report generation, sequential numbering, local storage, and thermal printing via PC software |
| Brand | INSMENT (Shanghai Jinsen) |
|---|---|
| Origin | Shanghai, China |
| Model | KS-8333BS |
| Flame Height (inner blue cone) | 25–30 mm (adjustable) |
| Gas Flow Rate | 0–1000 mL/min (adjustable) |
| Flame Temperature Range | 100–1000 °C (Bunsen burner, imported from Hamburg, USA) |
| Control System | Microprocessor-based with automatic ignition and timing |
| Temperature Display | Imported digital temperature indicator |
| Fuel Gas Purity | ≥95% propane or natural gas |
| Power Supply | AC 220 V ±10 V, 50 Hz |
| Operating Ambient Temperature | 10–35 °C |
| Relative Humidity | ≤75% |
| Brand | INSMENT (Shanghai Jinsen) |
|---|---|
| Origin | Shanghai, China |
| Model | UL-01 |
| Compliance Standards | UL 476, UL 1026, UL 507 |
| Intended Use | Electrical Appliance Access Protection Testing for Household and Similar Equipment |
| Construction | Precision-machined rigid probe with defined geometry and force-limited articulation per UL requirements |
| Material | Non-conductive, dimensionally stable engineering polymer |
| Dimensions | Conforms to UL-defined tip diameter (12.0 mm), length (80 mm), and joint radii per Clause 8.3 of UL 476 |