MMM
Filter
Showing all 11 results
| Brand | MMM |
|---|---|
| Origin | Germany |
| Model | CLC |
| Temperature Range (with humidification) | −20 °C to 160 °C |
| Temperature Uniformity | ±0.1 °C |
| Humidity Range | 10–95 % RH |
| Chamber Volume | 111–1212 L |
| Brand | MMM |
|---|---|
| Origin | Germany |
| Chamber Volumes | 111 L, 222 L, 404 L, 707 L |
| Temperature Range | –10 °C / 0 °C to 99.9 °C (dry) |
| Temp. Uniformity | ±0.1 °C |
| Humidity Range | 10–95 %RH |
| Humidity Uniformity | ±1.5 %RH |
| Control Logic | Fuzzy PID |
| Refrigerant | R134a |
| Safety Class | EU Class 3.1 |
| Compliance | ICH Q1A(R3), Q1B(R2), cPMP/ICH/380/95, USP <1151>, ISO 14644-1 (Class 7 compatible), FDA 21 CFR Part 11 (software validation support) |
| Validation Support | IQ/OQ/PQ documentation and execution available in English & Chinese |
| Interface | RS232 |
| Programmability | Up to 16-step cycles with independent control of temperature, humidity, light intensity (visible & UV), fan speed, dwell time, ramp profiles, and cycle repetition |
| Brand | MMM |
|---|---|
| Origin | Germany |
| Chamber Volumes | 111 L, 222 L, 404 L, 707 L, 1212 L |
| Temperature Range | –20 °C to 99.9 °C (model-dependent) |
| Temperature Uniformity | ±0.2 °C |
| Humidity Range | 10–98 % RH |
| Humidity Deviation | ±2 % RH |
| Heating Rate | 1–3 °C/min |
| Control System | PID-based fuzzy logic controller |
| Chamber Construction | Fully stainless steel interior |
| Lighting Options | ICH-compliant visible & UV light modules |
| Safety | Independent temperature safety device (EU Class 3.1), visual/audible alarm |
| Refrigerant | R134a |
| Data Interface | RS232 |
| Validation Support | IQ/OQ/PQ documentation and execution available |
| Compliance | ICH Q1A, Q1B, Q5C |
| Brand | MMM |
|---|---|
| Origin | Germany |
| Model | Climacell 111 / 222 / 404 / 707 |
| Internal Volume | 111 L / 222 L / 404 L / 707 L |
| Temperature Range | −10 °C to 99.9 °C (dry) |
| Humidity Range | 10–95 % RH |
| Temp. Uniformity | ±0.1 °C |
| Humidity Uniformity | ±1.5 % RH |
| Control Logic | Fuzzy Logic PID |
| Illumination Options | ICH-compliant Visible & UV-A/UV-B Light Sources |
| Refrigerant | R134a |
| Safety Class | EU Class 3.1 |
| Validation Support | IQ/OQ/PQ Documentation Available |
| Compliance | ICH Q1A(R3), Q1B, cPMP/ICH/380/95, USP <1151>, FDA 21 CFR Part 11 (with optional audit trail software) |
| Brand | MMM |
|---|---|
| Origin | Germany |
| Oven Type | High-Temperature Laboratory Drying Oven |
| Volume Range | 22 L – 707 L |
| Temperature Range | 10 °C to 300 °C |
| Temperature Uniformity | ±0.5 °C (Venticell, at 160 °C, per DIN 12880) |
| Temperature Stability | ±0.3 °C (Ecocell, typical at setpoint) |
| Interior Material | AISI 304 Stainless Steel |
| Heating Method | Electric Resistance Heating |
| Air Circulation | Natural Convection (Ecocell) or Adjustable Forced-Air (Venticell) |
| Safety Class | Protection Class III (IEC 61010-1) |
| Interface | RS232 (standard), optional RS485/Ethernet |
| Certifications | CE, TÜV GS, ISO 9001, ISO 14001, compliant with IEC 61010-1, EN 61326-1, FDA 21 CFR Part 11 (with optional audit trail software) |
| Brand | MMM |
|---|---|
| Origin | Germany |
| Model Range | Friocell 22L, 55L, 111L, 222L, 404L, 707L, 1212L |
| Temperature Range | −10 °C to 99.9 °C (model-dependent |
| Friocell 22 | 5–70 °C |
| Friocell 1212 | 0–70 °C) |
| Display | 3-inch LCD (7.6 cm), digital setpoint resolution 0.1 °C |
| Chamber Material | AISI 304 stainless steel |
| Air Circulation | Top-mounted stainless-steel fan generating upward spiral airflow |
| Safety System | Independent adjustable temperature safety device (EU Class 3.1), visual & audible alarm |
| Compliance | CE, ISO 13485, compliant with ICH guidelines, USP <1031>, and Chinese Pharmacopoeia 2015 edition |
| Interfaces | RS232, USB, BMS relay contact alarm |
| Software | Warmcomm data logging & remote monitoring |
| Programmability | Up to 16-step profiles (temperature, fan speed, duration, ramp rates) |
| Accessories | Optional LED lighting modules, PT-100 probe ports, stainless-steel trays, printer interface, side access ports, IQ/OQ/PQ validation documentation |
| Brand | MMM |
|---|---|
| Origin | Germany |
| Model Options | 15 L, 20 L, 25 L |
| Maximum Temperature | 134 °C |
| Maximum Pressure | 3.1 bar (g) |
| Chamber Dimensions | Ø238 mm × 430 mm (L) |
| External Dimensions | 460 mm × 720 mm × 430 mm (W×H×D) |
| Chamber Volume | 15 L / 20 L / 25 L |
| Sterilization Method | Pulsed Vacuum Steam Sterilization (STERIDENT & STERIMAT) |
| Vacuum System | Integrated diaphragm vacuum pump (max. –87 kPa) |
| Control Interface | Full-color TFT touchscreen |
| Chamber Material | AISI 316 stainless steel (EN 10088-1 compliant) |
| Compliance | prEN 13060:2023, EN 285, DIN 58950, DIN 58951, PED 2014/68/EU, Machinery Directive 2006/42/EU, FDA 21 CFR Part 11 (with optional audit trail), GMP/cGMP, GAMP 5 |
| Brand | MMM |
|---|---|
| Origin | Germany |
| Model | Sterivap |
| Type | Vertical Autoclave |
| Chamber Volume | 148–2056 L |
| Construction Material | AISI 316L Stainless Steel Chamber & Double Jacket |
| Compliance | EN 285, EN 554, EN ISO 11134, prEN 866-4 to -8, prEN 868-9 to -10, ISO 14161, ASME BPVC Section VIII, PED 97/23/EC, IEC 61010, HTM 2010/2031, 21 CFR Part 11 (with optional software), GLP/GMP-ready |
| Safety Features | Dual CPU Control, Independent Pressure & Temperature Sensors, Mechanical Door Interlock, Overpressure & Low-Water Cut-off, HEPA-Filtered Air Inlet/Exhaust, P3/P4 Biological Sealing |
| Vacuum System | Two-Stage Water-Ring Vacuum Pump with 70% Reduced Water Consumption |
| Control Interface | 8.2" Touchscreen HMI with Real-Time Curve Logging |
| Standard Programs | 4 Predefined + Up to 14 Customizable Cycles (incl. BD Test, VT Test, Preheat) |
| Optional | Integrated Pure Steam Generator (EN 285 Compliant), F₀-Control Software, IQ/OQ Documentation Package, Mobile PT100 Probe, Rapid Cooling Module, Air Content Sensor |
| Brand | MMM |
|---|---|
| Origin | Germany |
| Model | UNISTERI |
| Instrument Type | Vertical |
| Max Temperature | 134 °C |
| Max Pressure | 3.1 bar |
| Chamber Dimensions | 509 × 990 mm |
| External Dimensions | 1720 × 850 × 1247 mm |
| Chamber Volume Options | 73 L, 160 L, 254 L |
| Chamber Material | 316L stainless steel |
| Jacket Material | 316Ti stainless steel |
| Steam Contact Piping | 316L stainless steel |
| Vacuum System | Two-stage vacuum pump |
| Filtration | Integrated inlet and exhaust HEPA/sterile-grade filters |
| Cooling Options | Natural or rapid cooling |
| Documentation | Built-in thermal printer for real-time temperature/pressure curves and cycle logs |
| Compliance | EN 285, DIN 58951, DIN 58950, PED 2014/68/EU, Machinery Directive 2006/42/EU, FDA 21 CFR Part 11 (with optional audit trail), GMP/cGMP, GLP, GAMP 5 |
| Brand | MMM |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Vaculab PL |
| Instrument Type | Vertical |
| Max. Sterilization Temperature | 134 °C |
| Chamber Dimensions | 710 × 650 × 690 mm (318 L) |
| External Dimensions | 1818 × 1600 × 970 mm |
| Chamber Volume Options | 318 L, 456 L, 644 L, 1020 L, 1300 L, 1600 L, 3520 L, 4160 L |
| Chamber Material | Electropolished 316L Stainless Steel (Ra ≤ 0.4 µm) |
| Jacket Material | 316Ti Stainless Steel |
| Steam Source Options | External Steam Supply or Integrated Electric Steam Generator |
| Door Configuration | Single or Double Motorized 316L Stainless Steel Door |
| Vacuum System | Siemens Two-Stage Vacuum Pump |
| Control System | Programmable Logic Controller (PLC) — configurable with Siemens or Allen-Bradley platform |
| Data Recording | Built-in Thermal Printer (batch ID, cycle parameters, real-time temperature/pressure curves), Audit Trail Storage, USB Export Interface |
| Validation Ports | Dedicated Temperature & Pressure Probe Ports per EN 285 and ISO 17665-1 |
| Sensors | JUMO-certified PT100 Class A temperature sensors and high-stability pressure transducers |
| Filtration | PALL 0.2 µm Hydrophobic Sterile Vent Filter |
| Cooling System | Optional Integrated High-Efficiency Fan Module (reduces liquid load cooldown from 121 °C to 80 °C in ≤40 min) |
| Brand | MMM |
|---|---|
| Origin | Germany |
| Model | Venticell 22, 55, 111, 222, 404, 707L |
| Temperature Range | 10 °C to 300 °C |
| Temperature Uniformity | Standard (per IEC 60068-3-5) |
| Chamber Material | AISI 304 Stainless Steel |
| Heating Method | Electric Resistance Heating |
| Compliance | CE, TÜV, ISO 9001, IEC 61010-1, BS EN 61010-1 |
| Regulatory Alignment | USP <1211>, EP 2.6.12, FDA 21 CFR Part 11 (software-enabled variants), cGMP Annex 15, ICH Q5C |