Supelco
Filter
Showing 1–30 of 54 results
| Brand | Supelco |
|---|---|
| Origin | Germany |
| Model | Prove100 / Prove300 / Prove600 |
| Instrument Type | Laboratory Water Quality Analyzer |
| Detection Parameters | COD, Ammonia-N, Total Phosphorus, Total Nitrogen |
| Wavelength Range | Prove100: 320–1100 nm |
| Prove300 & Prove600 | 190–1100 nm |
| Light Source | Prove100: Tungsten Halogen Lamp |
| Prove300 & Prove600 | Xenon Flash Lamp |
| Spectral Bandwidth | Prove100 & Prove300: 4 nm |
| Prove600 | 1.8 nm |
| Absorbance Range | ±3.0 Abs |
| Absorbance Resolution | 0.001 Abs |
| Wavelength Accuracy | ±1 nm |
| Stray Light | ≤0.1% T at 340 nm (all models) |
| Sample Holders | 16-mm round cuvettes |
| Built-in Methods | Pre-programmed Spectroquant® test protocols + 99 user-defined methods + 20 wavelength-scan/dynamic methods |
| Compliance | EN 61010-1, IEC 61010-1, EN IEC 61326-1, 2004/108/EC |
| IP Rating | IP31 |
| Operating Temperature | 10–35 °C |
| Dimensions | 416 × 276 × 237 mm |
| Weight | 6.8 kg |
| Brand | Supelco |
|---|---|
| Origin | Germany |
| Model | Spectroquant® Move100 |
| Instrument Type | Portable/HANDHELD Water Quality Analyzer |
| Detection Parameters | COD, Ammonia-N, Total Nitrogen, Total Phosphorus, Free Chlorine, Total Chlorine, Hardness, Phosphate, Sulfate, Iron, Copper, etc. |
| Light Source | LED (430, 530, 560, 580, 610, 660 nm) |
| Wavelength Accuracy | ±2% of range |
| Photometric Range | 0–2 A |
| Linearity Accuracy | ±0.002 A (0–1 A) |
| Linearity Repeatability | ±0.002 A (0–1 A) |
| Wavelength Selection | Automatic |
| Readout Modes | % Transmittance, Absorbance, Concentration |
| Data Storage | 1,000 measurements with timestamp, ID, and sample registration |
| Connectivity | IRiM infrared transmitter + PC interface via USB/serial adapter |
| Power Supply | 4 × AA alkaline batteries |
| Ingress Protection | IP68 |
| Weight | 470 g |
| Operating Environment | 0–50 °C, ≤90% RH |
| Included Accessories | Instrument body, carrying case, 4 AA batteries, three 24-mm cuvettes, three 16-mm cuvettes, adapter, mini screwdriver, user manual, certificate of conformity |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Model | 33318-U |
| Temperature Range | Ambient to 150°C |
| Stability at 37°C | ±0.1°C |
| Uniformity within Block at 37°C | ±0.1°C |
| Heat-Up Time to 100°C | 45 min |
| Input Power | 110 W (120 V / 0.9 A or 230 V / 0.5 A) |
| Dimensions | 31.5 × 20.3 × 8.9 cm |
| Weight | 2.6 kg |
| Block Material | Anodized Aluminum |
| Block Compatibility | Interchangeable modular blocks for microtubes, centrifuge tubes, vials, microplates, PCR strips/tubes |
| Thermometer Well | Integrated per block |
| Dual-Range Control | Low (ambient–100°C), High (75–150°C) |
| Brand | Supelco |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Spectroquant® Prove |
| Instrument Type | Laboratory Water Quality Analyzer |
| Measurable Parameters | COD, Ammonia-Nitrogen, Total Phosphorus, Total Nitrogen |
| Optical Range | Prove 100 (320–1100 nm), Prove 300/600 (190–1100 nm) |
| Light Source | Tungsten Halogen (Prove 100), Xenon Flash Lamp (Prove 300 & 600) |
| Spectral Bandwidth | 4.5 nm (Prove 100/300), 1.8 nm (Prove 600) |
| Cuvette Compatibility | Round (13 mm, 16 mm) and Rectangular (10 mm, 20 mm, 50 mm, 100 mm) |
| AQA Compliance | Built-in Analytical Quality Assurance per ISO/IEC 17025 and DIN EN ISO 9001 guidelines |
| Data Transfer | USB, Bluetooth, optional Ethernet |
| Software | Spectroquant® Method Manager v5.x with FDA 21 CFR Part 11-compliant audit trail |
| Brand | Supelco |
|---|---|
| Origin | Germany |
| Model | TR320 / TR420 / TR620 |
| Digestion Method | Rapid Digestion |
| Heating Modules | Dual Independent Blocks (TR620), Single Block (TR320/TR420) |
| Batch Capacity | 12–24 samples (16 mm digestion tubes) |
| Temperature Range | Ambient to 170 °C (adjustable in 1 °C increments) |
| Temperature Accuracy | ±1.0 °C |
| Inter-Zone Uniformity | ±1.5 °C (vs. setpoint, center vs. periphery) |
| Timer Range | 0–180 min |
| Timer Accuracy | ±1 min |
| Power Supply | 115–230 V~, 50/60 Hz |
| Dimensions (H×W×D) | 180 × 256 × 307 mm |
| Weight | TR320: 2.85 kg |
| TR420/TR620 | 3.6 kg |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Model | 57044 |
| Automation Level | Fully Automatic |
| Number of Channels | 12 |
| Extraction Type | Cartridge-Based SPE |
| Construction | Borosilicate Glass Reservoir, PTFE Tubing with Polypropylene Luer Fittings |
| Vacuum Control | Solvent-Resistant Spiral Valve with 1/4" Vacuum Port |
| Collection Support | Polypropylene Rack Compatible with 1–10 mL Vials, 10/16 mm Test Tubes, and Scintillation Vials |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Model | 57265 |
| Automation Level | Fully Automatic |
| Channel Count | 24-Channel |
| Extraction Type | Cartridge-Based SPE |
| Construction | Borosilicate Glass Reservoir, PTFE Tubing with Polypropylene Luer Fittings |
| Vacuum Control | Solvent-Resistant Helical Valve & Gauge Assembly |
| Collection Compatibility | 1–10 mL Vials, 10/16 mm Test Tubes, Scintillation Vials (20 mL), Autosampler Vials |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 57101-U |
| Automation Level | Semi-Automatic (Vacuum-Driven) |
| Channel Count | 5-Channel |
| Extraction Format | Cartridge-Based SPE |
| Brand | Supelco |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | 18L |
| Flow Rate | 18 L/min |
| Output Pressure | 7 bar (100 psig) |
| Nitrogen Purity | 99.5% |
| Dew Point | ≤ −50 °C |
| Inlet Air Pressure | 8.5 bar (125 psig) |
| Power Supply | 110 VAC, 50–60 Hz, 50 W |
| Dimensions (H×W×D) | 84 × 36 × 46 cm |
| Weight | 75 kg |
| Connection | 1/4" Swagelok® |
| Technology | Pressure Swing Adsorption (PSA) with Carbon Molecular Sieve (CMS) |
| Compressor | Integrated oil-free air compressor |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Model | 22971 |
| Dimensions (L × W × H) | 19 cm × 4 cm × 2 cm |
| Port Count | 6 |
| Needle Material | Stainless Steel |
| Gas Control | Adjustable needle valve |
| Tubing Length | 0.9 m (3 ft) |
| Container Compatibility | 1–250 mL |
| Packaging | 1 unit per package |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 28423-U |
| Automation Level | Semi-Automatic |
| Channel Count | Multi-Channel (6-12 positions, configurable) |
| Extraction Format | Cartridge-Based Column Extraction |
| Compliance | ASTM D6988, EPA Method 1613/1668C, ISO 18073, HJ 77.1–77.4-2008 |
| Solvent Reduction | Up to 60% vs. Manual SPE |
| Processing Time Savings | 24–48 hours per batch |
| Average Recovery Rate | ≥85% for PCDD/Fs and DL-PCBs |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Model | 33316 |
| Block Diameter | 21 mm (for 3–5 mL microreaction vials) |
| Temperature Range | Ambient to 150 °C (dual-range: Low: ambient–100 °C |
| High | 75–150 °C) |
| Stability at 37 °C | ±0.1 °C |
| Uniformity within Block at 37 °C | ±0.1 °C |
| Heat-Up Time to 100 °C | 45 min |
| Power Input | 120 V / 0.9 A / 110 W or 230 V / 0.5 A / 110 W |
| Dimensions | 31.5 × 20.3 × 8.9 cm (12.4 × 8 × 3.5 in) |
| Net Weight | 2.6 kg (5.8 lbs) |
| Construction | Anodized aluminum modular block with integrated thermometer well |
| Compatibility | Interchangeable with Supelco multi-block heating base units (sold separately) |
| Brand | Supelco |
|---|---|
| Model | 33318-U |
| Origin | USA |
| Voltage | 120 V / 230 V |
| Power | 110 W |
| Temperature Range | Ambient to 150 °C (Low range: Ambient–100 °C |
| High range | 75–150 °C) |
| Stability at 37 °C | ±0.1 °C |
| Uniformity within Block at 37 °C | ±0.1 °C |
| Heat-up Time to 100 °C | 45 min |
| Dimensions | 31.5 × 20.3 × 8.9 cm |
| Weight | 2.6 kg |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | 57265 |
| Automation Level | Semi-Automatic |
| Channel Count | Single-Channel |
| Extraction Format | Column-Based SPE |
| Flow Rate Control Range | 0.1–30 mL/min |
| Solvent Reservoir Positions | 24 |
| Sample Capacity | 24 Samples |
| Sample Loading Volume | 1–30 mL |
| Wetted Materials | Borosilicate Glass |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Product Type | Imported SPME Fiber Assembly |
| Model Numbers | 57300-U (Manual), 57301 (Automated) |
| Packaging | 3 fibers per vial |
| Coating | Polydimethylsiloxane (PDMS), 100 µm thickness |
| Fiber Substrate | Fused silica |
| Needle Gauge | 24 ga |
| Compatibility | Manual SPME holder (e.g., 57330-U) and automated SPME autosamplers (e.g., CTC Analytics PAL, Gerstel MPS) |
| Target Analytes | Volatile and semi-volatile non-polar compounds (MW 60–275) |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Type | Manual (57310-U) / Automated (57311) |
| Coating | Polydimethylsiloxane/Divinylbenzene (PDMS/DVB), 65 µm thickness |
| Fiber length | 10 mm |
| Needle gauge | 24 ga |
| Pack size | 3 fibers per vial |
| Compatibility | GC, GC-MS, HPLC-MS (with derivatization or specialized interface) |
| Recommended analyte MW range | 50–300 Da |
| Application focus | Volatile and semi-volatile polar/non-polar compounds including amines, nitroaromatics, and low-MW VOCs |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Coating | Carboxen/Polymethylsiloxane (CAR/PDMS) |
| Fiber Diameter | 75 µm |
| Configuration | Manual (57318) or Autosampler-Compatible (57319) |
| Pack Size | 3 fibers per vial |
| Target Analytes | Volatile and semi-volatile organic compounds (MW 30–225) |
| Compliance | Designed for ASTM D6866, EPA Method 8260C/8270E, ISO 17025-accredited laboratories |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Product Type | Imported Laboratory Consumable |
| Kit Contents | 75 µm Carboxen/PDMS, 65 µm PDMS/DVB, 85 µm Polyacrylate Fibers (3 fibers total) |
| Compliance | Designed for ASTM D5845, EPA Method 8260C/624.1/524.2, ISO 17937, USP <467>, and GLP/GMP-aligned workflows |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Model | 57324-U / 57325-U |
| Packaging | 3 fibers per vial |
| Coating Types | 100 µm PDMS, 65 µm PDMS/DVB, 75 µm CAR/PDMS |
| Reusability | ≥100 extractions (up to 200 under clean-sample conditions) |
| Compliance | Designed for ASTM E2878, ISO 17025-compliant labs, compatible with USP <467> residual solvent and flavor profiling workflows |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Product Type | Imported SPME Fiber for Volatile and Semi-Volatile Compounds (C₃–C₂₀) |
| Model | 57328-U (Manual) / 57329-U (Automated) |
| Coating | Divinylbenzene/Carboxen/Polydimethylsiloxane (DVB/CAR/PDMS), 50/30 µm |
| Package | 3 fibers per vial |
| Compatibility | GC, GC-MS, HS-GC, HS-GC-MS |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Model | 57330-U / 57311 |
| Compatibility | Manual sampling with GC/HPLC inlet systems |
| Sample vial capacity | Compatible with 4 mL and 15 mL vials |
| Reusability | Indefinitely reusable with replaceable SPME fibers |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Model | 57333-U (for 4 mL vials) / 57357-U (for 15 mL vials) |
| Sample Vial Capacity | 4 mL or 15 mL |
| Number of Samples | 8 positions |
| Compatibility | Manual SPME fiber holder only |
| Base Design | Compatible with standard magnetic stirrer/heater plates |
| Temperature Control | Dependent on external heater/stirrer unit |
| Stirring Speed | Dependent on external magnetic stirrer |
| Regulatory Compliance | Designed for use in GLP/GMP-compliant laboratories per ASTM D7216 and ISO 17025 workflows |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Model | ENVI-Disk |
| Type | Disk-Based Solid Phase Extraction (SPE) System |
| Disk Options | ENVI-8 (C8-bonded, 24 mm), ENVI-18 (C18-bonded, 24 mm), 47 mm & 90 mm formats available |
| Vacuum Source Compatibility | GAST 74329 (imported) or domestic portable vacuum pump |
| Accessories | PTFE spiral clamp (ID 47 mm), PTFE edge gasket, 1 L conical flask (40/35 joint), 25 × 250 mm collection tubes, TF-lined vacuum buffer bottle |
| Compliance | Designed for EPA Methods 508.1, 525.3, 625.1 |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Model | KL-SPMETS-JG (GB/T 32470-2016 Compliant) |
| Sample Vial Capacity | 40 mL / 60 mL |
| Throughput | 4 samples per run |
| Extraction Temperature | 100 °C |
| Stirring Speed | 1150 rpm |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Model | KLGC-SPME |
| Configuration | Manual SPME Holder with Adjustable Depth Sleeve and Replaceable Coated Fibers |
| Compliance | Designed for ASTM D7219, ISO 17935, USP <467>, EPA Method 8260/8270 Compatible |
| Software Integration | Standalone manual operation |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | KLVIPSPE-12 / KLVIPSPE-24 |
| Automation Level | Semi-Automatic |
| Channel Count | 12- or 24-Channel |
| Extraction Mode | Cartridge-Based SPE |
| Flow Rate Control | Adjustable via patented spiral valve |
| Compatible Solvents | All common organic and aqueous solvents |
| Sample Capacity | Up to 12 or 24 samples simultaneously |
| Sample Load Volume | 1 mL to unlimited (gravity/vacuum-assisted) |
| Solvent-Wetted Materials | PTFE, borosilicate glass, polypropylene |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Model | KLVIPSPE-12 |
| Automation Level | Fully Automated |
| Channel Count | 12-Channel |
| Extraction Type | Cartridge-Based SPE |
| Flow Control | Precision Spiral-Valve Flow Regulation |
| Solvent Compatibility | Broad Spectrum (Including Acetonitrile, Methanol, Ethyl Acetate, Hexane, Dichloromethane, and Aqueous Buffers) |
| Max Simultaneous Samples | 12 |
| Sample Loading Volume Range | 1 mL to Unlimited (with Optional Large-Volume Samplers) |
| Wetted Materials | PTFE Tubing, Borosilicate Glass Chamber, Polypropylene Collection Rack |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Model | KLVIPSPE-24 |
| Automation Level | Manual |
| Number of Channels | 24 |
| Extraction Type | Column-based SPE |
| Flow Control | Precision spiral-flow valve |
| Solvent Compatibility | Compatible with all common organic and aqueous solvents (e.g., methanol, acetonitrile, ethyl acetate, water, buffer solutions) |
| Maximum Sample Capacity | 24 samples simultaneously |
| Sample Loading Volume | 1 mL to unlimited (with optional large-volume samplers) |
| Wetted Materials | Borosilicate glass chamber and PTFE (polytetrafluoroethylene) tubing/valves |
| Cross-Contamination Mitigation | Disposable PTFE column connection tubes with polypropylene Luer tips |
| Vacuum Interface | 1/4″ barbed vacuum port with integrated solvent-resistant vacuum gauge and sealable valve |
| Collection Vessel Support | Polypropylene rack accommodating 1–10 mL vials, 10/16 mm test tubes, scintillation vials (20 mL), and autosampler vials |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Supelco |
| Pricing | Upon Request |
| Brand | Supelco |
|---|---|
| Origin | USA |
| Model | 22971 |
| Heating Method | Water Bath |
| Temperature Stability | ±0.5 °C |
| Sample Capacity | 6 positions |
| Dimensions (L × W × H) | 19 cm × 4 cm × 2 cm |
| Compatibility | 1–250 mL containers |
| Packaging | 1 unit per package |