WIGGENS
Filter
Showing 301–330 of 496 results
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WA8 |
| Bath Volume | 3–8 L |
| Temperature Range | Ambient +5 to 99.9 °C |
| Temperature Stability | ±0.2 °C |
| Temperature Resolution | 0.1 °C |
| Heating Power | 2.0 kW |
| Circulation Type | Internal & External |
| Control Mode | Heating-Only |
| Ingress Protection | IP52 (Control Panel), IP43 (Unit) |
| Construction | Mirror-Finish Stainless Steel Interior, Corrosion-Resistant Coated Exterior |
| Safety Features | Low-Level Liquid Alarm, Over-Temperature Cut-Off at 105 °C, Waterproof Sealed Keypad |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-350 |
| Temperature Range | +4–95 °C |
| Temperature Accuracy | ±0.1 °C |
| Heating Time to 95 °C | ≤25 min |
| Dimensions (W×D×H) | 276 × 334 × 250 mm |
| Net Weight | 4.3 kg |
| Power Supply | 230 V, 50/60 Hz, 2.8 A |
| Display | VFD with dual-setpoint readout (set vs. actual) |
| Control System | PID feedback loop |
| Temp. Uniformity at 80 °C | ±0.1 °C |
| Temp. Stability at 80 °C | ±0.5 °C |
| Safety Features | Overtemperature cutoff (heating plate >150 °C), PCB thermal protection, current-limiting circuitry, visual red warning indicator |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-350 |
| Temperature Range | +4 to 95°C |
| Temperature Accuracy | ±0.1°C at 37°C |
| Temperature Uniformity (Fluctuation) | ±0.1°C at 37°C |
| Temperature Ramp Rate | Rapid heating and cooling |
| Control System | PID microprocessor feedback control |
| Display | High-brightness VFD screen with touch keypad |
| Housing Material | Chemical-resistant polypropylene |
| Heating/Cooling Module | Anodized aluminum block with optimized thermal coupling |
| Lid | Transparent polycarbonate for real-time sample observation |
| Programmability | 10 user-defined programs, each with up to 10 steps |
| Timer Modes | Two independent timing functions — immediate start or delay start upon reaching setpoint |
| Safety Features | Overtemperature cutoff, PCB current limiting, thermal fuse protection |
| External Dimensions (W×D×H) | 276 × 334 × 165 mm |
| Internal Chamber Dimensions (W×D×H) | 99 × 77.5 × 36 mm |
| Net Weight | 5.0 kg |
| Power Supply | 230 V, 50/60 Hz, 2 A |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-350S |
| Temperature Range | Ambient +5 to 130 °C |
| Accuracy | ±0.1 °C (at setpoint) |
| Temperature Uniformity (at 80 °C) | ±0.1 °C (stability), ±0.5 °C (gradient across block) |
| Control System | PID feedback with overshoot suppression |
| Display | VFD (dual-channel: setpoint & real-time temperature) |
| Timer Modes | Two independent modes — delay start or dwell time after reaching setpoint |
| Safety Features | Dual thermal cutoffs (heating plate >150 °C, PCB overtemperature), current limiting, auto power-off, visual high-temp warning (red LED) |
| External Dimensions (W×D×H) | 276 × 334 × 120 mm |
| Internal Chamber (W×D×H) | 154 × 99 × 37 mm |
| Net Weight | 3.9 kg |
| Power Supply | 230 V, 50/60 Hz, 2.8 A |
| Operating Environment | 2–60 °C, ≤80% RH (non-condensing) |
| Standard Accessories | Main unit, protective lid |
| Heating blocks | Optional, application-specific |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-350S |
| Temperature Range | +5–130 °C |
| Temperature Accuracy | ±0.1 °C |
| Dimensions (W×D×H) | 276×334×120 mm |
| Net Weight | 3.9 kg |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-350T |
| Temperature Range | Ambient +5 to 130°C |
| Temperature Accuracy | ±0.1°C |
| Temperature Uniformity | ±0.5°C |
| Dimensions (W×D×H) | 276 × 334 × 120 mm |
| Power Supply | 230 V, 50/60 Hz, 2.8 A |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-502C |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | 40–80 °C (ambient) |
| Temperature Accuracy | ±0.1 °C |
| Sample Capacity | 1.5 mL × 132, 15 mL × 12, 50 mL × 8, 96-well plates × 2 |
| Maximum Rotational Speed | ≤1500 rpm |
| Vacuum System | PTFE-coated diaphragm pump (WIGGENS C410), ultimate vacuum ≥13 mbar |
| Cooling Trap | Integrated −20 °C cold trap (2 L capacity) |
| Heating Method | IR-heated glass lid + optional conductive heating |
| Control | PID temperature control, touch-key LED panel |
| Timer Range | 0–99 h 59 min |
| Dimensions (W×D×H) | 670 × 685 × 480 mm |
| Power Supply | 220 V, 50/60 Hz, 1200 W |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-502C |
| Temperature Range | 4–80 °C |
| Temperature Accuracy | ±0.1 °C |
| Sample Capacity | 132 × 1.5 mL tubes |
| Max Rotor Speed | ≤1500 rpm |
| Vacuum System | PTFE-coated diaphragm pump (WIGGENS C410), ultimate vacuum ≥13 mbar |
| Integrated Cold Trap | −20 °C |
| Heating Options | IR-only / IR + conductive / conductive-only |
| Timer Range | 00:01–99:59 (h:min) |
| Dimensions (W×D×H) | 670 × 685 × 480 mm |
| Power Supply | 220 V, 50/60 Hz, 1200 W |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-503C |
| Temperature Range | 35–65 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Rotational Speed Options | 1700 / 2500 / 5000 rpm |
| Heating Modes | Infrared Only / Infrared + Conductive / Conductive Only |
| Vacuum Source | PTFE-Coated Corrosion-Resistant Diaphragm Pump |
| Ultimate Vacuum | 100 mbar |
| Chamber Capacity | 0.5 mL × 50 |
| Timer Range | 0–99 h 59 min |
| Power Supply | 220 V, 50/60 Hz, 200 W |
| Dimensions (W×D×H) | 213 × 255 × 255 mm |
| Certifications | CE, RoHS 5 |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-503G |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5 °C to 120 °C |
| Temperature Stability | ±0.1 °C |
| Sample Capacity | 20 positions |
| Tube Diameters Supported | 11 mm, 13 mm, 16 mm |
| Heating Power | 125 W |
| Dimensions (W×D×H) | 310 × 250 × 435 mm |
| Weight | 6 kg |
| Power Supply | 110/220 V, 50/60 Hz |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-504C |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | 4–80 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Sample Capacity | 250 mL × 4 positions |
| Rotational Speed | ≤1500 rpm |
| Ultimate Vacuum | ≥2 mbar |
| Cold Trap | −20 °C, 2 L collection volume |
| Dimensions (W×D×H) | 600 × 630 × 1085 mm |
| Weight | 138 kg |
| Power Supply | 220 V, 50/60 Hz |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-504C |
| Instrument Type | Floor-standing centrifugal concentrator |
| Max. Speed | 1500 rpm |
| Max. Capacity | 250 mL × 4 |
| Temp. Range | +4–80 °C (0.1 °C resolution) |
| Vacuum Performance | ≤2 mbar (PTFE diaphragm pump, WIGGENS C610) |
| Cold Trap | −20 °C, 2 L collection volume |
| Dimensions (W×D×H) | 600 × 630 × 1085 mm |
| Weight | 138 kg |
| Power Supply | 220 V, 50/60 Hz |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB-504C |
| Temperature Range | 35–65°C |
| Temperature Control Accuracy | ±0.1°C |
| Maximum Rotational Speed | ≤1500 rpm |
| Vacuum Level | ≥2 mbar |
| Integrated Cold Trap | −20°C, 2 L capacity |
| Chamber Dimensions (W×D×H) | 600 × 630 × 1085 mm |
| Weight | 138 kg |
| Power Supply | 220 V, 50/60 Hz |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB1800-DF |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Mixing Volume | 40 L |
| Speed Range | Gear I: 20–600 rpm |
| Gear II | 361–1800 rpm |
| Speed Accuracy | ±1 rpm or ±1% of reading |
| Torque Output | 565 N·cm (Gear I), 113 N·cm (Gear II) |
| Viscosity Range | ≤150,000 cP |
| Shaft Clamp Diameter | ≤10 mm |
| Power Input | 150 W |
| Dimensions (W×D×H) | 200 × 95 × 230 mm |
| Head Weight | 5 kg |
| Controller Cable Length | 2 m |
| Display | TFT Touchscreen |
| Control Interface | Detachable Handheld Controller with Quick-Connect Aviation Connectors |
| Housing Material | Anodized Aluminum |
| Compliance | CE, RoHS, IEC 61010-1 |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB1800-EC / WB3000-EC |
| Maximum Mixing Volume | 100 L |
| Speed Range | 20–800 rpm (WB1800-EC) / 70–3000 rpm (WB3000-EC) |
| Torque | ≤1640 N·cm (WB1800-EC), ≤410 N·cm (WB3000-EC) |
| Continuous Rated Torque | 46 N·cm (WB1800-EC), 41 N·cm (WB3000-EC) |
| Viscosity Range | ≤300,000 cP (WB1800-EC), ≤200,000 cP (WB3000-EC) |
| Motor Power Input | 450 W |
| Motor Dimensions (W×D×H) | 75×75×225 mm (WB1800-EC), 75×75×165 mm (WB3000-EC) |
| Motor Weight | 3.4 kg (WB1800-EC), 2.8 kg (WB3000-EC) |
| Control Interface | USB 2.0, 0–10 V analog input/output, 0–20 mA input, footswitch port |
| Display | TFT touchscreen with real-time torque and speed readout |
| Enclosure Material | Anodized aluminum housing |
| Compliance | CE, RoHS, IEC 61000-6-3/6-4 |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB2000-B1 |
| Max. Stirring Volume (Water) | 50 L |
| Speed Range | 40–2000 rpm |
| Torque | ≤95 N·cm |
| Stirring Viscosity Limit | ≤50,000 cP |
| Control Accuracy | ±1 rpm |
| Drive Type | Brushless DC Motor |
| Input/Output Power | 150 W / 100 W |
| Clamp Shaft Diameter | ≤10 mm |
| Dimensions (W×D×H) | 98 × 230 × 265 mm |
| Display & Control | LED Digital Display + Rotary Digital Knob |
| Reversibility | None |
| Ordering Code | W3041220 |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB2000-B1 |
| Max. Mixing Volume | 70 L |
| Speed Range | 50–2000 rpm |
| Torque | ≤105 N·cm |
| Viscosity Range | ≤75,000 mPa·s |
| Motor Type | Brushless DC |
| Display Resolution | 1 rpm |
| Speed Accuracy | ≤±3% (n > 300 rpm) |
| Power Input/Output | 200 / 140 W |
| Dimensions (W×D×H, excl. support rod) | 100 × 241 × 295 mm |
| Weight (unit + power supply) | 6.3 kg |
| IP Rating | IP42 |
| Communication Interface | RS485 |
| Chuck Capacity | 0.5–10 mm |
| Hollow Shaft ID | 10.2 mm |
| Temperature Resolution | 0.1 °C |
| Operating Modes | LED display + rotary knob control |
| Safety Features | Auto overload protection, soft-start, status LEDs (standby/blue, run/green, alarm/red) |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB2000-B2 |
| Stirrer Type | Overhead Stirrer |
| Max. Mixing Volume | 100 L |
| Speed Range | 40–2000 rpm |
| Torque | ≤140 N·cm |
| Viscosity Range | ≤100,000 mPa·s |
| Motor Type | Brushless DC Motor |
| Display | LED, Resolution 1 rpm |
| Speed Accuracy | ≤±3% (n > 300 rpm) |
| Power Input/Output | 200 W / 160 W |
| Dimensions (W×D×H, excl. support rod) | 100 × 241 × 295 mm |
| Weight (main unit + power supply) | 6.3 kg |
| Protection Class | IP42 |
| Communication Interface | RS485 |
| Shaft Clamp Range | 0.5–10 mm |
| Hollow Shaft Inner Diameter | 10.2 mm |
| Operating Temperature Resolution | 0.1 °C |
| Status Indicators | Standby (blue), Running (green), Alarm (red) |
| Optional Features | Screen Lock Function |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB2000-C |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Mixing Volume | 50 L (H₂O) |
| Speed Range | 20–2000 rpm |
| Speed Accuracy | ±1 rpm |
| Torque | ≤70 N·cm |
| Max. Viscosity | ≤20,000 cP |
| Motor Power Input/Output | 70 W / 50 W |
| Clamp Diameter | ≤10 mm |
| Reversibility | Yes |
| Control Interface | LCD Digital Display, RS-232 Port, 0–20 mA & 0–10 V Analog Input, 0–5 V Analog Output, Footswitch Port |
| Dimensions (W×D×H) | 105 × 160 × 185 mm |
| Enclosure Finish | Corrosion-Resistant Surface Treatment |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB2000-C |
| Maximum Stirring Volume | 50 L |
| Speed Range | 20–2000 rpm |
| Speed Accuracy | ±1 rpm |
| Torque | ≤70 N·cm |
| Viscosity Range | ≤20,000 cP (water-equivalent) |
| Motor Type | Brushless DC |
| Power Input/Output | 70 W / 50 W |
| Clamping Range | 0.5–10 mm |
| Display | LCD with LED backlight |
| Interfaces | RS-232, 0–20 mA input, 0–10 V input, 0–5 V output, foot switch port |
| Reversibility | Yes |
| Dimensions (W×D×H) | 105 × 160 × 185 mm |
| Weight | Approx. 2.8 kg |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB2000-M |
| Motor Type | Brushless DC |
| Max. Stirring Volume (Water) | 50 L |
| Speed Range | 40–2000 rpm |
| Speed Accuracy | ±1 rpm |
| Max. Viscosity | ≤20,000 cP |
| Torque | ≤70 N·cm |
| Power Input/Output | 70 W / 50 W |
| Clamp Diameter | ≤10 mm |
| Dimensions (W×D×H) | 105 × 160 × 185 mm |
| Display & Control | LED digital display + large rotary knob |
| Reversibility | No |
| Protection | Built-in overload protection, sealed low-noise housing |
| Brand | WIGGENS |
|---|---|
| Origin | USA |
| Model | WB2000-M |
| Maximum Stirring Volume | 20 L |
| Speed Range | 40–2000 rpm |
| Motor Type | Brushless DC |
| Torque | 70 N·cm |
| Max. Viscosity | 20,000 cP |
| Shaft Clamp Diameter | 10 mm |
| Forward/Reverse Function | Yes |
| Power Input/Output | 70 W / 50 W |
| Dimensions (W × D × H) | 105 × 160 × 185 mm |
| Control | Digital Display + Large Knob |
| Speed Accuracy | ±1 rpm |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB2000-M |
| Max. Stirring Volume | 50 L |
| Speed Range | 40–2000 rpm |
| Speed Accuracy | ±1 rpm |
| Torque | ≤70 N·cm |
| Viscosity Range | ≤20,000 cP |
| Clamp Capacity | 0.5–10 mm |
| Motor Type | Brushless DC |
| Power Input/Output | 70 / 50 W |
| Dimensions (W×D×H) | 105 × 160 × 185 mm |
| Display | LED Digital |
| Control | Rotary Knob with Digital Feedback |
| Reversibility | Yes |
| Starting Speed | 20 rpm |
| Housing | Corrosion-Resistant Surface Finish |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB2000-S |
| Max. Stirring Volume | 50 L |
| Speed Range | 70–2000 rpm |
| Motor Type | Brushless DC |
| Torque | ≤62 N·cm |
| Viscosity Range | ≤45,000 mPa·s |
| Display Resolution | 1 rpm (≥1 rpm) |
| Speed Accuracy | ≤±3% (n > 300 rpm) |
| Power Input/Output | 85 W / 60 W |
| Dimensions (W×D×H, w/o support rod) | 66 × 177 × 225 mm |
| Weight (main unit + power supply) | 2.7 kg |
| IP Rating | IP42 |
| Shaft Clamp Range | 0.5–10 mm |
| Hollow Shaft Inner Diameter | 10.2 mm |
| Communication Interface | RS485 |
| Operating Temp. Resolution | 0.1 °C |
| Status Indicators | Standby (blue), Running (green), Alarm (red) |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB2000-U |
| Stirrer Type | Overhead Stirrer |
| Max. Mixing Volume | ≤50 L |
| Speed Range | 40–2000 rpm |
| Display Resolution | 1 rpm |
| Speed Accuracy (n > 300 rpm) | ≤±3% |
| Max. Viscosity | ≤50,000 mPa·s |
| Torque | ≤70 N·cm |
| Motor Type | Brushless DC Motor |
| Shaft Clamping Range | 0.5–10 mm |
| Hollow Shaft Inner Diameter | 10.2 mm |
| Communication Interface | RS485 |
| Power Input/Output | 100–240 VAC, 50/60 Hz / 100 W / 70 W |
| Dimensions (W×D×H, excl. support rod) | 101×191×251 mm |
| Weight (main unit + power supply) | 3.5 kg |
| IP Rating | IP42 |
| Operating Temperature Resolution | 0.1 °C |
| Status Indicators | Standby (blue), Running (green), Alarm (red) |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB3000-C / WB1800-C |
| Maximum Stirring Volume | 100 L |
| Speed Range | 20–3000 rpm |
| Torque | ≤1320 N·cm (WB1800-C), ≤330 N·cm (WB3000-C) |
| Continuous Rated Torque | 188 N·cm (WB1800-C), 47 N·cm (WB3000-C) |
| Viscosity Range | ≤150,000 cP (WB1800-C), ≤100,000 cP (WB3000-C) |
| Control Accuracy | ±1 rpm |
| Motor Type | Brushless DC |
| Input/Output Power | 150 W |
| Motor Dimensions (W×D×H) | 65×65×216 mm (WB1800-C), 65×65×157 mm (WB3000-C) |
| Motor Weight | 2.3 kg (WB1800-C), 1.8 kg (WB3000-C) |
| Interface | USB 2.0, 0–10 V analog input/output, 0–20 mA analog input, footswitch port |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB3000-DF |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Mixing Volume | 100 L |
| Speed Range | Gear I: 30–600 rpm |
| Gear II | 601–3000 rpm |
| Speed Accuracy | ±1 rpm or ±1% of reading |
| Max. Torque | 339 N·cm (Gear I), 68 N·cm (Gear II) |
| Viscosity Range | ≤100,000 cP |
| Shaft Clamp Diameter | ≤10 mm |
| Output Power | 150 W |
| Dimensions (mm) | 200 × 95 × 230 |
| Weight | 5 kg |
| Order No. | 100400F |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB3000-EC / WB1800-EC |
| Max. Stirring Volume | 100 L |
| Speed Range | 20–3000 rpm |
| Torque | up to 1640 N·cm (WB1800-EC), 410 N·cm (WB3000-EC) |
| Continuous Rated Torque | 46 N·cm (WB1800-EC), 116 N·cm (WB3000-EC) |
| Viscosity Range | ≤300,000 cP (WB1800-EC), ≤200,000 cP (WB3000-EC) |
| Control Accuracy | ±1 rpm |
| Input/Output Power | 450 W |
| Motor Dimensions (W×D×H) | 225×75×75 mm (WB1800-EC), 165×75×75 mm (WB3000-EC) |
| Motor Weight | 3.4 kg (WB1800-EC), 2.8 kg (WB3000-EC) |
| Interface | USB 2.0, 0–10 V analog input/output, 0–20 mA input, footswitch port |
| Cable Length (standard) | 3 m (optional: 1.5 / 6 / 10 m) |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WB3000-M |
| Stirrer Type | Overhead Stirrer |
| Max. Mixing Volume | 50 L |
| Speed Range | 70–3000 rpm |
| Torque | ≤70 N·cm |
| Viscosity Range | ≤50,000 mPa·s |
| Display Resolution | 1 rpm (≥1 rpm) |
| Speed Accuracy | ≤±3% at n > 300 rpm |
| Motor | Brushless DC |
| Shaft Clamp Range | 0.5–10 mm |
| Hollow Shaft Inner Diameter | 10.2 mm |
| Power Input | 200 W |
| Dimensions (W×D×H, excl. support rod) | 100 × 241 × 295 mm |
| Weight (main unit + power supply) | 6.3 kg |
| Communication Interface | RS485 |
| Operating Temperature Resolution | 0.1 °C |
| LED Display | High-brightness, remote-readable |
| Control | Analog rotary knob with glove-compatible design |
| Safety Features | Auto overload protection, soft-start at low speed, status LED indicators (standby: blue, operation: green, alarm: red) |
| Brand | WIGGENS |
|---|---|
| Origin | Germany |
| Model | WCI-120 |
| Temperature Range | RT +5 to 60 °C |
| Temperature Uniformity | ±0.3 °C (at 37 °C and 20 °C) |
| Chamber Volume | 120 L |
| External Dimensions | 580 × 560 × 765 mm |
| Heating Power | 320 W |
| CO₂ Range | 0–20% |
| CO₂ Accuracy | ±0.1% (at 5% CO₂, 37 °C) |
| CO₂ Sensor | Dual-beam infrared |
| Temperature Display Resolution | 0.1 °C |
| CO₂ Resolution | 0.1% |
| Chamber Material | SUS304 stainless steel |
| Control System | Microprocessor-based PID with independent dual-channel keypad |
| Air Jacket Type | Gas-jacketed with six-sided gradient heating |
| HEPA Filtration | Standard (optional high-temp HEPA) |
| Safety Features | Overtemperature cutoff, door-heating anti-condensation, audible alarm for CO₂/temperature deviation |