Common Laboratory Equipment
Filter
Showing 4021–4050 of 17856 results
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDG Series |
| Type | Vacuum Drying Oven |
| Temperature Range | RT+5°C to 250°C |
| Temperature Uniformity | ±0.5°C |
| Chamber Material | Stainless Steel (304) |
| Heating Method | Convection-Free Resistive Heating with Dual-Stage Nitrogen Flow Control |
| External Dimensions | 600 × 600 × 600 mm (W×D×H) |
| Compliance | GB 474–2008, JB/T 5520–91, GB/T 212–2008, GB/T 211–2017 |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TDG-30A |
| Instrument Type | General-Purpose Forced-Air Drying Oven |
| Temperature Range | RT+5°C to 250°C |
| External Dimensions (W×D×H) | 625 × 450 × 490 mm |
| Internal Chamber Dimensions (W×D×H) | 340 × 330 × 320 mm |
| Temperature Resolution | 0.1°C |
| Operating Ambient Temperature | 5–45°C |
| Chamber Material | Stainless Steel (AISI 304) |
| Heating Method | Forced-Air Convection with Adjustable Fan Speed |
| Temperature Uniformity | ±1.5°C at 100°C (per JB/T 5520-91) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDG-50A |
| Instrument Type | General-Purpose Forced-Air Drying Oven |
| Temperature Range | RT+5°C to 250°C |
| Temperature Uniformity | Not specified by manufacturer |
| Temperature Fluctuation | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Chamber Dimensions (W×D×H) | 420 × 350 × 350 mm |
| External Dimensions (W×D×H) | 705 × 520 × 520 mm |
| Nominal Volume | 50 L |
| Interior Material | Stainless Steel (SUS304) |
| Heating Method | Forced-Air Convection with Adjustable Fan Speed |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 850 W |
| Operating Ambient Temperature | 15–30°C |
| Safety Features | Over-Temperature Alarm, Over-Heat Protection, Pressure Relief Mechanism |
| Control System | LCD Digital Controller with PID Algorithm |
| Standard Accessories | 2 Removable Stainless Steel Shelves, Nitrogen Flow Control Assembly (Rotameter + Solenoid Valve), Fan Speed Regulator |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TDG-70A |
| Instrument Type | General-Purpose Drying Oven |
| Temperature Range | RT+5°C to 250°C |
| Temperature Fluctuation | ±0.5°C |
| External Dimensions (W×D×H) | 735×520×635 mm |
| Control Temperature Range | RT+5°C to 250°C |
| Internal Chamber Dimensions (W×D×H) | 450×400×450 mm |
| Temperature Resolution | 0.1°C |
| Operating Ambient Temperature | 0–40°C |
| Interior Material | Stainless Steel (AISI 304) |
| Heating Method | Forced-Air Circulation |
| Temperature Uniformity | ±2.5°C |
| Gas Flow Control | Adjustable Nitrogen Flow Meter Installed |
| Compliance Standards | GB/T 212–2008, GB/T 211–2017, JB/T 5520–1991 |
| Optional Accessories | Independent Over-Temperature Protector, Calibration Port, RS485 Interface, Miniature Thermal Printer |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model Series | TDK & DK4 |
| Bath Volume | 12–120 L |
| Temperature Range | RT +5°C to 100°C |
| Temperature Resolution | 0.1°C |
| Temperature Stability | ±0.03°C to ±0.5°C (model-dependent) |
| Heating Power | 1000–9000 W |
| Voltage | AC 220 V, 50 Hz |
| Control Type | PID-based microprocessor controller with LED/LCD display |
| Optional Features | Dry-run protection (F-series), recirculating pump (B-series), triple-zone independent temperature control (D-series), refrigeration module (R-series), programmable 30-segment timer, RS485 communication interface, auto-refill (external water source required) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDK-24R |
| Bath Volume | 24 L |
| Temperature Range | 15 °C to 70 °C |
| Temperature Stability | ±0.3 °C |
| Temperature Resolution | 0.1 °C |
| Cooling/Heating Type | Dual-mode (Refrigeration & Heating) |
| Input Power | 1000 W |
| Supply Voltage | AC 250 V, 50 Hz |
| Communication Interface | RS485 |
| Construction | Stainless Steel Interior & Deck, Powder-Coated Exterior |
| Circulation Mode | Internal/External Dual-Mode Pump System |
| External Cooling Capability | Yes (via dual-port fluid circulation) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TDK-24R |
| Instrument Type | Constant-Temperature Bath |
| Circulation Function | Non-Circulating |
| Temperature Control Mode | Refrigeration & Heating |
| Bath Volume | 24 L |
| Temperature Range | 15–70 °C |
| Temperature Stability | ±0.3 °C |
| Temperature Resolution | 0.1 °C |
| Input Power | 1000 W |
| Power Supply | AC 220 V, 50 Hz |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDK-360C-II |
| Bath Volume | 360 L |
| Temperature Range | RT+5°C to 100°C |
| Temperature Resolution | 0.1°C |
| Control Mode | Heating-Only PID |
| Circulation Type | Internal Pump Circulation |
| Construction | 304 Stainless Steel Interior & Powder-Coated Cold-Rolled Steel Exterior |
| Insulation Thickness | 100 mm |
| Power Supply | AC 380 V |
| Internal Dimensions (W×H×D) | 1000 × 450 × 800 mm |
| External Dimensions (W×H×D) | 1200 × 955 × 1270 mm |
| Safety Features | Dry-run Protection, Over-Temperature Alarm, Auto-Recovery After Power Failure, Parameter Memory Retention |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | TDK-36R |
| Price Range | USD 590 – 910 |
| Temperature Range | 0–100 °C (standard operation 5–100 °C) |
| Inner Chamber Dimensions | 300 mm × 300 mm × 400 mm (W×D×H) |
| Bath Depth | 400 mm |
| Visual Chamber | Transparent Front Panel |
| Construction | 304 Stainless Steel Interior & Lid, Electrostatically Sprayed Steel Exterior |
| Heating System | Submersible Sealed Immersion Heater |
| Control System | Microprocessor-Based PID Controller with LED Display, Timer Function, Auto-Tuning |
| Safety Features | Dry-run Protection (Water Level Sensor), Over-Temperature Alarm & Cut-off, Power-Fail Parameter Memory, Auto-Recovery on Power Restoration |
| Optional | Integrated Circulation Pump (for Uniform Temperature Distribution), R-Series Compressor Cooling Module (for sub-ambient operation down to –10 °C), 30-Stage Programmable Temperature Ramp Profile, Auto-Fill Kit (external water source required) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TDK-8AD |
| Instrument Type | Constant-Temperature Bath |
| Circulation Function | Non-Circulating |
| Temperature Control Mode | Heating-Only |
| Bath Volume | 30 L |
| Temperature Range | RT+5°C to 100°C |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Input Power | 2000 W |
| Supply Voltage | AC 220 V, 50 Hz |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TDK-8AS |
| Instrument Type | Constant-Temperature Bath |
| Circulation Function | None |
| Temperature Control | Heating-Only |
| Bath Capacity | 12 L |
| Temperature Range | RT+5°C to 100°C |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Input Power | 1000 W |
| Supply Voltage | AC 220 V, 50 Hz |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TDK-8AX |
| Instrument Type | Heating Water Bath |
| Circulation Function | Non-circulating |
| Temperature Control Mode | Heating-only |
| Bath Volume | 22 L |
| Temperature Range | RT+5°C to 100°C |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Input Power | 1500 W |
| Supply Voltage | 220 V, 50 Hz |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TDK-8D |
| Instrument Type | Constant-Temperature Bath |
| Circulation Function | Non-Circulating |
| Temperature Control Mode | Heating-Only |
| Total Capacity | 3 × 2.1 L (6.3 L total) |
| Temperature Range | RT + 5°C to 100°C |
| Temperature Stability | ±0.3°C |
| Temperature Resolution | 0.1°C |
| Input Power | 1500 W |
| Supply Voltage | AC 220 V, 50 Hz |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDK-8DZ |
| Instrument Type | Triple-Zone Circulating Water/Oil Bath |
| Temperature Range | RT+5 to 99°C |
| Temperature Resolution | 0.1°C |
| Bath Capacity | 3 × 3 L (independent zones) |
| Circulation | Internal & External |
| Temperature Control Mode | Heating & Cooling Capable |
| Input Power | 1500 W |
| Voltage | AC 220 V, 50 Hz |
| Construction | 304 Stainless Steel Inner Tank & Lid |
| Insulation | Multi-Layer Waterproof Thermal Insulation |
| Safety Features | Over-Temperature Alarm, Auto-Recovery After Power Failure, Parameter Memory Retention |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | TDK-B22 |
| Instrument Type | Constant-Temperature Bath |
| Circulation Function | External Circulation |
| Temperature Control | Heating-Only |
| Bath Capacity | 22 L |
| Temperature Range | RT+5 to 65 °C |
| Temperature Stability | ±0.2 °C |
| Temperature Resolution | 0.1 °C |
| Input Power | 1100 W |
| Power Supply | AC 220 V, 50 Hz |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TDK-B30 |
| Instrument Type | Immersion Constant-Temperature Bath |
| Circulation Function | Non-Circulating |
| Temperature Control | Heating-Only |
| Bath Volume | 30 L |
| Temperature Range | RT + 5 °C to 65 °C |
| Temperature Stability | ±0.2 °C |
| Temperature Resolution | 0.1 °C |
| Input Power | 1550 W |
| Supply Voltage | AC 220 V, 50 Hz |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDK-F54A |
| Bath Volume | 54 L |
| Temperature Range | RT+5°C to 100°C |
| Temperature Resolution | 0.1°C |
| Temperature Stability | ±0.5°C (typical, per ISO 17025-compliant calibration conditions) |
| Heating Power | 4000 W |
| Power Supply | AC 220 V, 50 Hz |
| Circulation Type | Internal recirculation pump |
| Control Mode | PID-based heating-only temperature regulation |
| Construction | 304 stainless steel inner chamber and lid, electrostatically sprayed steel exterior |
| Safety Features | Dry-run protection with water level sensor, over-temperature alarm & cut-off, power-failure parameter retention |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TDK-XB54 |
| Instrument Type | Constant-Temperature Bath |
| Circulation Function | External Circulation |
| Temperature Control | Heating-Only |
| Bath Volume | 54 L |
| Temperature Range | RT + 5 °C to 100 °C |
| Temperature Resolution | 0.1 °C |
| Input Power | 4000 W |
| Supply Voltage | AC 220 V, 50 Hz |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic |
| Model | TDM-64V |
| Instrument Type | Vacuum Oven |
| Temperature Range | RT+10 to 200 °C |
| Temperature Fluctuation | ±0.1 °C |
| Inner Chamber Dimensions | 400 × 400 × 400 mm |
| Temperature Resolution | 0.1 °C |
| Operating Ambient Temperature | 5–45 °C |
| Inner Chamber Material | Stainless Steel (HMDS-resistant grade) |
| Heating Method | Forced-air Circulation |
| Vacuum Level | ≤133 Pa |
| Compliance | Designed for ISO/IEC 17025-aligned lab environments, compatible with GLP/GMP documentation workflows and ASTM F2289 (Standard Practice for HMDS Vapor Priming of Silicon Wafers) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDM-90V |
| Temperature Range | RT+10–200 °C |
| Temperature Uniformity | ±0.1 °C |
| Temperature Resolution | 0.1 °C |
| Chamber Dimensions (W×D×H) | 450×450×450 mm |
| Chamber Volume | 90 L |
| Chamber Material | 316L Stainless Steel |
| Ultimate Vacuum | ≤30 Pa (0.3 mbar) |
| Control System | PLC with Color Touchscreen Interface |
| Vacuum Pump Type | Dry Scroll Vacuum Pump |
| Application | HMDS vapor priming for photolithography substrates |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Model | TDZ-30 |
| Instrument Type | General-Purpose Drying Oven |
| Temperature Range | RT+5°C to 250°C |
| External Dimensions (W×D×H) | 615 × 500 × 505 mm |
| Internal Chamber Dimensions (W×D×H) | 320 × 320 × 300 mm |
| Temperature Resolution | 0.1°C |
| Operating Ambient Temperature | 5–45°C |
| Interior Material | Stainless Steel (AISI 304) |
| Heating Method | Forced-Air Circulation with Adjustable Fan Speed |
| Vacuum Capability | Optional integrated vacuum pump (V-series variant) |
| Compliance | GB 474–2008, JB/T 5520–91, GB/T 212–2008, GB/T 211–2017 |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TDZ-V30 |
| Instrument Type | Vacuum Drying Oven |
| Temperature Range | RT+10°C to 250°C |
| Temperature Fluctuation | ±0.5°C |
| External Dimensions | 615 × 500 × 505 mm |
| Internal Chamber Dimensions | 320 × 320 × 300 mm |
| Temperature Resolution | 0.1°C |
| Operating Ambient Temperature | 0–45°C |
| Chamber Material | Stainless Steel (AISI 304) |
| Heating Method | Forced-Air Circulation with Adjustable Fan Speed |
| Temperature Uniformity | Compliant with JB/T 5520–1991 (±2.0°C at 100°C, typical) |
| Vacuum Capability | Integrated Vacuum Pump (Optional), Ultimate Vacuum ≤10 Pa (with optional dual-stage rotary vane pump) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDZ-V90 |
| Type | General-purpose vacuum/nitrogen drying oven |
| Temperature Range | RT+5°C to 550°C |
| Temperature Uniformity | ±2.5°C (empty load @ 100°C) |
| Temperature Fluctuation | ±1°C |
| Temperature Resolution | 0.1°C |
| Control Range | RT+5°C to 250°C |
| Vacuum Degree | –85 kPa |
| Internal Chamber Dimensions | 450 × 450 × 450 mm |
| External Dimensions | 775 × 580 × 720 mm |
| Inner Chamber Material | Stainless Steel (SUS304) |
| Heating Method | Forced-air convection (optional nitrogen purge mode) |
| Operating Ambient Temperature | RT+5°C |
| Compliance | GB 474–2008, JB/T 5520–91, GB/T 212–2008, GB/T 211–2017 |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TDK-120A |
| Bath Volume | 120 L |
| Temperature Range | RT + 5°C to 100°C |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Heating Power | 9000 W |
| Supply Voltage | AC 380 V, 50 Hz |
| Control Type | PID-based microprocessor controller with timer function |
| Construction | 304 stainless steel interior and lid, electrophoretic epoxy-coated exterior, Teflon-coated immersion surfaces |
| Safety Features | Dry-run protection with water level sensor, over-temperature alarm and cut-off, auto-recovery after power interruption, parameter memory retention |
| Optional Configurations | External chiller integration (R-series), 30-segment programmable temperature ramping, auto-fill module (requires external water source) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TER Series |
| Price Range | USD 280–1,270 (FOB) |
| Heating Power | 1.2 kW – 2.4 kW |
| Max Operating Temperature | 450 °C |
| Temperature Uniformity | ±3 °C |
| Hotplate Surface Dimensions | 170 × 170 mm |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | TER Series |
| Price Range | USD 365 – 1,280 (FOB) |
| Heating Power | 1200 W – 2400 W |
| Controller | PID Microprocessor-Based Temperature Control |
| Max Operating Temperature | 450 °C |
| Surface Dimensions (W×D×H) | 300×355×125 mm to 620×355×200 mm |
| Heating Zone Dimensions | 300×300 mm to 500×300 mm |
| Display & Interface | Analog Rotary Knob (Non-Digital), Optional Digital Display Versions Available (TER-F/TER-S-I) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TER-30 |
| Price Range | USD 280–420 |
| Heating Power | 1200 W |
| Controller | PID Microprocessor-Based Temperature Control |
| Max Operating Temperature | 450 °C |
| Temperature Uniformity | Not Specified by Manufacturer |
| Plate Dimensions (W×D×H) | 365 × 303 × 130 mm |
| Heating Zone Dimensions | 300 × 300 mm |
| Display & Interface | Analog Knob Adjustment (Non-Digital) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TER-30F |
| Price Range | USD 850–1,150 (FOB) |
| Heating Power | 1200 W |
| Temperature Control | PID Microprocessor-Based Controller |
| Max Operating Temperature | 450 °C |
| Heating Zone Dimensions | 300 × 300 mm |
| Overall Dimensions (W × D × H) | 365 × 303 × 130 mm |
| Display & Interface | Analog Rotary Knob with Visual Temperature Scale |
| Surface Material | Polycrystalline Ceramic (Schott Ceran®-grade Glass-Ceramic) |
| Construction | Integrated Monoblock Design |
| Corrosion Resistance | 316L Stainless Steel Frame + Acid-Resistant Ceramic Top |
| Safety Features | Sealed Internal Circuitry, Thermal Isolation Base, Non-Combustible Enclosure, Low-Thermal-Expansion Panel |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TER-30S |
| Heating Power | 1200 W |
| Temperature Control | PID Microprocessor Controller |
| Max Operating Temperature | 400 °C |
| Heating Zone Dimensions | 300 × 300 mm |
| Overall Dimensions | 300 × 355 × 130 mm |
| Display | Digital LED |
| Surface Material | Ceramized Glass (Microcrystalline Glass) |
| Construction | Integrated One-Piece Design with Corrosion-Resistant 316L Stainless Steel Frame |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | TER-35F |
| Price Range | USD 850–1,150 |
| Heating Power | 2400 W |
| Temperature Control | PID Microprocessor-Based Controller |
| Max Operating Temperature | 450 °C |
| Heating Surface Dimensions | 500 × 300 mm |
| Overall Dimensions (W×D×H) | 500 × 370 × 130 mm |
| Panel Material | Ceramic Glass (Microcrystalline Glass) |
| Enclosure Frame | 316L Stainless Steel |
| Control Interface | Analog Rotary Knob (Non-Digital, Manual Adjustment) |
| Thermal Uniformity | Not Specified by Manufacturer |
| Compliance | Designed for GLP-compliant sample preparation workflows |