Common Laboratory Equipment
Filter
Showing 4051–4080 of 4952 results
| Brand | Rainin |
|---|---|
| Origin | USA |
| Model | Pipet-Lite XLS+ |
| Type | Manual Single-Channel Pipette |
| Volume Range | 0.1 µL to 20 mL |
| Maximum Capacity | 20 mL |
| Accuracy | ±0.6% |
| Tip Ejection Force | 0.6 kg |
| Brand | Rainin |
|---|---|
| Origin | USA |
| Model | L-10XLS+, L-20XLS+, L-100XLS+ |
| Type | Single-Channel Manual Pipette |
| Channels | 1 |
| Volume Range | 0.5–2000 µL |
| Maximum Capacity | 2000 µL |
| Accuracy | ±1% at 20 µL, ±0.8% at 200 µL |
| Sterilization | Fully autoclavable (liquid end, tip ejector, and sleeve) |
| Compliance | GLP/GMP-ready with embedded RFID for calibration traceability |
| Ergonomics | Magnetic Assist™ piston mechanism, LTS™ LiteTouch System, low-force plunger actuation, glove-friendly volume adjustment |
| Brand | RAININ |
|---|---|
| Origin | Switzerland |
| Model | Pipet-One |
| Type | Manual Single-Channel Pipette |
| Channel Count | 1 |
| Compliance | ISO 8655–2 (Gravimetric Testing), GLP/GMP-Compatible Design |
| Ergonomic Certification | EN ISO 10535–1 (Hand Tools – Ergonomic Requirements) |
| Materials | Chemically Resistant Polypropylene Housing, Stainless Steel Piston, PTFE-Sealed Mechanism |
| Sterilization | Autoclavable (121°C, 20 min, full assembly) |
| Weight Range | 78–112 g (model-dependent) |
| Calibration Interval | Recommended annually per ISO/IEC 17025 guidelines |
| Brand | RAININ |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | QuickFlow 4L |
| Max. Aspiration Rate | 17 mL/s |
| Noise Level | <60 dB(A) |
| Collection Bottle Capacity | 4 L |
| Sterilization Compatibility | Autoclavable (121°C, 20 min) |
| Compliance | Designed for GLP-compliant labs |
| Brand | Rainin |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model No. | 30551512 |
| Ultimate Vacuum Range | –20 kPa to –70 kPa |
| Maximum Aspiration Rate | 15 mL/s |
| Dimensions (W × D × H) | 460 × 200 × 400 mm |
| Brand | Rainin |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model No. | 30564095 |
| Instrument Type | Single-Channel Pipette Verifier |
| Automation Level | Semi-Automatic (Weight-Based Verification) |
| Channel Configuration | Single-Channel |
| Volume Range | 10–1000 µL |
| Maximum Test Volume | 10 mL |
| Accuracy Tolerance | ±3% to ±10% (Volume-Dependent, Per ISO 8655) |
| Brand | Rainin |
|---|---|
| Origin | USA |
| Instrument Type | Single-Channel Electronic Pipette |
| Model | XLS E4 |
| Volume Range Options | 0.5–10 µL, 0.5–20 µL, 10–100 µL, 20–200 µL, 20–300 µL, 100–1000 µL, 200–2000 µL, 500–5000 µL, 1–10 mL, 2–20 mL |
| Minimum Increment | 0.01–10 µL (model-dependent) |
| Accuracy | ±0.4–5.0% |
| Precision (CV) | ≤0.12–1.5% |
| Motor Resolution | 4000 microsteps |
| Display | 16-bit color TFT touchscreen |
| Language Support | English, Chinese, German, French, Spanish, Japanese |
| Compliance | ISO 9001 certified |
| Connectivity | USB for firmware updates, RFID-enabled asset tracking |
| Power | Rechargeable Li-ion battery with rapid-charging station (3 units/hour) |
| Brand | Rainin |
|---|---|
| Origin | USA |
| Model | XLS+ |
| Type | Multi-Channel Pipette |
| Operation Modes | Manual & Electronic (E4 XLS+) |
| Compliance | ISO 8655, ASTM E2758, GLP/GMP-ready |
| Ergonomic System | LiteTouch™ LTS (Low-Torque Sealing) |
| Tip Compatibility | Rainin LTS tips only |
| Display | Color LCD (E4 model) |
| Power | Rechargeable Li-ion battery with optional rapid-charging station (3 units/hour) |
| Language Support | English, Chinese, and other major languages |
| Data Management | RFID-enabled calibration tracking, service log access |
| Key Functions | Standard pipetting, continuous dispensing, mixing, stepwise dispensing, serial dilution, reverse pipetting, titration, programmable aspiration/dispense speeds for viscous/temperature-sensitive samples |
| Tip Ejection | Gradual, low-force ejection via LTS mechanism |
| Weight | Ultra-lightweight chassis (<150 g for 8-channel manual variant) |
| Brand | Raise3D |
|---|---|
| Origin | Imported (USA/China dual-manufacturing footprint) |
| Manufacturer Type | Authorized Distributor |
| Pricing | Contact for Quotation |
| Software | ideaMaker v5.x (64-bit multithreaded slicer) |
| File Formats | STL, OBJ, 3MF → GCODE |
| UI Languages | English, French, German, Russian, Japanese, Chinese |
| Build Volume | 305 × 305 × 300 mm |
| Technology | Dual-Extrusion Fused Deposition Modeling (FDM) with Active Chamber Temperature Control |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | CNC2 |
| Weight | 150 kg |
| Dimensions (W×D×H) | 1230 × 830 × 830 mm |
| Power Supply | 220–240 VAC, 50 Hz, Single-Phase |
| Spindle Power | 1.5 kW |
| Spindle Speed Range | 2,400 – 24,000 rpm |
| XYZ Travel Range (approx.) | 600 × 300 × 175 mm |
| Worktable Size | 910 × 480 mm |
| Guidance System | High-Precision Linear Rails & Ball Screws |
| Safety Enclosure | Fully Interlocked, Light-Protected Cabinet with Internal LED Lighting and Emergency Stop |
| Control Software | FlashCut CNC (PC-Based, Not Included) |
| Brand | Raykol |
|---|---|
| Origin | Fujian, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM/ODM) |
| Country of Origin | China |
| Model | IDL 50S |
| Plate Processing Time | 30 sec per position |
| Dispensing Accuracy | < ±1% |
| Dispensing Volume Range | 0–20 mL |
| Sample Throughput | 36 positions |
| Dimensions (W×D×H) | 750 × 600 × 750 mm |
| Brand | Raykol |
|---|---|
| Origin | Fujian, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | MPE |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | Ambient to 80 °C |
| Temperature Control Accuracy | ±1 °C |
| Sample Volume Capacity | 1–200 mL |
| Brand | Raykol |
|---|---|
| Origin | Fujian, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | SPEVA |
| Automation Level | Fully Automated |
| Number of Channels | 8 Parallel Channels |
| Extraction Format | Cartridge-Based SPE |
| Flow Rate Control | 0.1–100 mL/min |
| Solvent Selection | Up to 6 Independent Solvent Reservoirs |
| Sample Capacity | 80 Positions |
| Sample Loading Volume | 0.1 mL to Unlimited |
| Wetted Materials | PTFE, Polypropylene (PP), PEEK |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | PM 400 |
| Instrument Type | Planetary Ball Mill |
| Sample Suitability | Hard, brittle, fibrous, soft to extremely hard materials |
| Feed Size | < 10 mm |
| Final Particle Size | < 0.1 µm (colloidal grinding) |
| Batch Volume | up to 4 × 220 mL or 8 × 20 mL |
| Grinding Platforms | 4 (standard), optional 2-platform configuration for mechanical alloying |
| Sun Wheel Diameter | 300 mm |
| Sun Wheel Speed | 30–400 rpm |
| Speed Ratio Options | 1:−2, 1:−2.5, 1:−3 |
| Drive Power | 1.5 kW |
| Net Weight | ~290 kg |
| Dimensions (W×H×D) | 836 × 1220 (1900) × 780 mm |
| Protection Class | IP 30 |
| Sound Pressure Level | LpAeq < 85 dB(A) |
| Compliance | CE certified |
| Grinding Jar Materials | Hardened steel, stainless steel, tungsten carbide, agate, sintered corundum, zirconium oxide |
| Jar Volumes | 12–500 mL |
| Programmable Parameters | 10 stored methods |
| Interface | RS 232 / RS 485 |
| Energy Input Measurement | Yes |
| Cooling | Automatic grinding chamber ventilation system |
| Brand | RMC |
|---|---|
| Origin | USA |
| Distributor Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PowerTome PC |
| Slice Thickness Range | 0 nm – 15 µm |
| Brand | RoacheLab |
|---|---|
| Model | RL-200 |
| Origin | Shanghai, China |
| Power Supply | AC 230 V, 50/60 Hz |
| Wind Tunnel Dimensions | 165 × 165 × 27.5 mm ±1 mm |
| Aperture Diameter | 130.0 mm ±1 mm |
| Air Velocity Range | 0.2–4.5 m/s ±0.1 m/s |
| Temperature Measurement Range (IR Sensor) | 15–50 °C ±0.1 °C |
| Water Dispensing Volume Range | 0.05–4.5 mL |
| Data Interface | USB 2.0 |
| Overall Dimensions | 500 × 500 × 560 mm (L×W×H) |
| Weight | ~40 kg |
| Brand | ROCKER |
|---|---|
| Origin | Taiwan |
| Model | BioVac225 Plus |
| Ultimate Vacuum | 107 mbar (≈80 mmHg) |
| Max Flow Rate | 25 L/min |
| Dimensions | 370 × 150 × 250 mm |
| Weight | 4.3 kg |
| Pump Type | Oil-Free Diaphragm |
| Overheat Protection | Yes |
| Waste Bottle Capacity | 1000 mL |
| Input Voltage | 200–240 V / 50 Hz (100–120 V / 60 Hz optional) |
| Bottle Material | Polycarbonate (PC) |
| Housing Material | ABS |
| Handheld Controller & Tip Ejectors | Polyoxymethylene (POM) |
| Hose Connector | 5/16″ (≈8 mm) OD |
| Sterilization | Autoclavable (121°C, 20 min, 1 bar) |
| Certifications | CE Marked per EU Machinery Directive 2006/42/EC and Low Voltage Directive 2014/35/EU |
| Brand | ROCKER |
|---|---|
| Origin | Taiwan |
| Manufacturer Authorization Status | Authorized Distributor |
| Domestic Product Classification | Yes |
| Model | Dragon200 |
| Fuel Type | Butane |
| Gas Consumption | 35 g/hr |
| Maximum Temperature | 1300°C |
| Fuel Capacity | 35 g |
| Continuous Operation Time | 60 min |
| Dimensions (L×W×H) | 8 × 12 × 9 cm |
| Net Weight | 410 g |
| Safety Certification | CE Marked |
| Brand | ROCKER |
|---|---|
| Origin | Taiwan |
| Model | Mars320 |
| Heating Power | 1000 W |
| Max. Temperature | 200 °C |
| Temperature Uniformity | ±1 °C |
| Heating Surface Dimensions | 36 × 22 × 11 cm |
| Controller | Independent OLED Display Unit |
| Temperature Range | Ambient +5 °C to 200 °C |
| Temp. Resolution | 1 °C |
| Temp. Accuracy | ±1 °C @ 150 °C |
| Timer Modes | Countdown (1 min – 99 h 59 min) & Continuous |
| Overheat Protection | 210 °C Cut-off |
| Compliance | RoHS |
| Brand | ROCKER |
|---|---|
| Origin | Taiwan |
| Model | ROCKER300C-1L |
| Ultimate Vacuum | 99 mbar |
| Maximum Flow Rate | 17 mL/sec |
| Dimensions | 285 × 135 × 204 mm |
| Bottle Capacity | 1 L (GL45) |
| Pump Type | Oil-Free Diaphragm |
| Wetted Materials | PTFE-Coated Housing, Borosilicate Glass Bottle, PTFE Hydrophobic Filter, Platinum-Cured Silicone Tubing |
| Noise Level | <50 dB(A) |
| Power Supply | 220 V / 50 Hz |
| Brand | Rocker |
|---|---|
| Origin | Taiwan |
| Model | WelVac200 |
| Housing Material | Anodized Aluminum |
| Collection Tray Material | Polycarbonate (PC) |
| Sealing Gasket & O-Rings | Silicone Rubber |
| Luer Connectors | Silicone |
| Compatible Tubing ID | 8 mm (5/16") |
| Dimensions (Internal) | 128 × 86 × 73 mm (L×W×H) |
| Dimensions (External) | 232 × 124 × 102 mm (L×W×H) |
| Net Weight | 2.6 kg |
| Gross Weight | 3.0 kg |
| Warranty | 2-Year Parts Coverage |
| Brand | Rong Tsong |
|---|---|
| Origin | Taiwan |
| Model | RT-N01A |
| Motor Power | 300 W |
| Voltage | 220 V AC, single-phase (custom voltage available) |
| Speed | 27,000 rpm |
| Chamber Capacity | 50 g |
| Feed Size | < 25 mm |
| Output Particle Size | 0.01–0.5 mm (≤ 350 µm) |
| Grinding Chamber Dimensions (H × Ø) | 31 × 87 mm |
| Unit Dimensions (W × D × H) | 152 × 105 × 270 mm |
| Net Weight | 2.1 kg |
| Chamber Material | SUS304 stainless steel |
| Blade Material | Heat-treated SUS420 stainless steel |
| Bearing | Imported Japanese precision bearing |
| Thermal Overload Protection | Integrated motor protection switch |
| Brand | RongYueChen |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Integrated Laboratory Furniture Design Service |
| Pricing | Upon Consultation |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | CP-6 |
| Dimensions (L×W×D) | 770 × 920 × 1860 mm |
| Platen Count | 1 |
| Platen Diameter | 400 mm |
| Platen Speed | 0–90 rpm |
| Integrated In-situ Sensors | Friction Torque, Acoustic Emission, Surface Temperature |
| Motion Control | Motorized X-Y Stage with Programmable Wafer Oscillation |
| In-line 3D Profilometry | Confocal + Interferometric + Bright/Dark Field Modes |
| Vertical Load Range | Programmable (Typical Range: 0–50 N, Configurable per Application) |
| Sample Compatibility | 50–300 mm wafers and substrates |
| Compliance | Designed for ASTM F2639, ISO/IEC 17025-aligned workflows, supports GLP/GMP data integrity requirements |
| Brand | RuboLab |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DASH |
| Hydrogen Generation Principle | Rare-Earth Alloy-Based Reversible Hydride Absorption/Desorption |
| Output Flow Rate | 150 L/min (STP) |
| Output Pressure Range | 0–20 MPa |
| Hydrogen Purity | 99.9999% (v/v) |
| Power Consumption | Application-Dependent — Typically <1 kW for thermal management during desorption cycles |
| Compliance | CE, PED 2014/68/EU, ASME BPVC Section VIII Div. 2 (design basis), ISO 16111:2017 (Hydrogen Technologies – Gaseous Hydrogen Storage) |
| Brand | RuboLab |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | DASH-1 |
| Hydrogen Generation Principle | Rare-Earth Alloy-Based Solid-State Hydrogen Storage & Release |
| Output Flow Rate | 150 L/min |
| Output Pressure Range | 0–70 MPa |
| Hydrogen Purity | 99.9999% |
| Power Consumption | Application-Dependent (Typical System-Side Electrical Input for Compression/Control: <5 kW) |
| Brand | RuboLab |
|---|---|
| Origin | Germany |
| Model | RuboHyCo |
| Hydrogen Generation Principle | Metal Hydride-Based Thermal Desorption |
| Output Flow Rate | 800 mL/min (per compression station) |
| Output Pressure | 20 MPa (2,900 psi) or 70 MPa (10,000 psi) |
| Hydrogen Purity | 99.9999% |
| Power Consumption | Not specified (device is thermally actuated |
| Brand | Ruinen Instrument |
|---|---|
| Model | RNHA-300 |
| Output Flow | H₂ 0–300 mL/min, Air 0–3000 mL/min |
| Purity | H₂ >99.999% |
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | <0.2% |
| H₂ Reservoir Volume | 3 L |
| Feed Water Resistivity | ≥1 MΩ·cm |
| Air Noise Level | <35 dB(A) |
| Power Supply | 220 V ±10%, 50–60 Hz |
| Operating Temperature | 0–40 °C |
| Operating Humidity | <85% RH |
| Brand | Ruinen |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM Manufacturer |
| Model | RNT-300 |
| Nitrogen Purity | ≥99.999% |
| Hydrogen Purity | ≥99.999% |
| Nitrogen Flow Rate | 0–300 mL/min |
| Hydrogen Flow Rate | 0–300 mL/min |
| Air Flow Rate | 0–3000 mL/min |
| Output Pressure | 0–0.4 MPa |
| Pressure Stability | <±0.2% FS |
| Nitrogen & Hydrogen Reservoir Volume | 3 L each |
| Feed Water Resistivity Requirement | ≥1 MΩ·cm |
| Air Compressor Noise Level | <35 dB(A) |
| Power Supply | 220 V ±10%, 50–60 Hz |
| Operating Temperature | 0–40 °C |
| Operating Humidity | <85% RH |
| Design | Integrated (All-in-One) Unit |
| Brand | LabTech |
|---|---|
| Model | RWAI |
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Equipment Category | Domestic |
| Sample Handling | Waste Liquid Monitoring and Overflow Prevention |
| Compatibility | Universal for Chromatography Systems and Sample Preparation Instruments |
| Pressure Equalization | Integrated Micro-Ventilation Port in Sealed Lid |
| Customization | OEM-Compatible Sealing Adapters and Drain Fittings for Existing Instrument Tubing |
| Container Support | 10 L, 20 L, and Other Standard Waste Carboys |