Common Laboratory Equipment
Filter
Showing 7381–7410 of 18046 results
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Midi MR 1 digital |
| Motor Output Power | 19 W |
| Max. Stirring Volume (H2O) | 50 L |
| Speed Range | 0–1000 rpm |
| Max. Stir Bar Length | 80 mm |
| Plate Material | Stainless Steel 1.4301 |
| Plate Dimensions | 350 × 350 mm |
| Device Dimensions | 360 × 110 × 430 mm |
| Weight | 10.7 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class | IP21 (per DIN EN 60529) |
| Interface | RS232 + USB |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Input Power | 80 W |
| Fuse | 2 × T4A, 250 V |
| Timer Range | 0–56 min (or continuous mode) |
| Heating Function | None |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Midi MR 1 digital |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume (H₂O) | 50 L |
| Speed Range | 0–1000 rpm |
| Motor Output Power | 19 W |
| Drive Interface | RS232 & USB |
| Timer Range | 0–56 min |
| Stir Bar Max Length | 80 mm |
| Working Plate Material | Stainless Steel 1.4301 |
| Plate Dimensions | 350 × 350 mm |
| Device Dimensions (W × H × D) | 360 × 110 × 430 mm |
| Weight | 10.7 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Protection Class | IP21 (DIN EN 60529) |
| Input Voltage | 100–120 V / 230 V, 50/60 Hz |
| Input Power | 70 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | mini G |
| Instrument Type | Benchtop Microcentrifuge |
| Speed | 6000 rpm |
| Max Capacity | 8 × 2.0 mL |
| Dimensions | 155 × 105 × 175 mm |
| Weight | 1.4 kg |
| Power Supply | 100–240 V, 50/60 Hz |
| Input Power | 12 W |
| Protection Class | IP30 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| Acceleration | 2000 × g |
| Rotor Type | Fixed-angle rotor |
| Timer Range | 1–99 min |
| Timer Display | LED |
| Auto-Rotor Recognition | No |
| Quick-Stop Function | Yes |
| Lid Safety Interlock | Yes |
| Tool-Free Rotor Exchange | Yes |
| Noise Level | <45 dB(A) |
| Continuous Operation Duty Cycle | 100 % |
| Compliance | DIN EN 60529, IEC 61010-1 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Miniature Low-Speed Benchtop Centrifuge |
| Model | IKA mini G |
| Maximum Speed | 6000 rpm |
| Maximum RCF | 2000 × g |
| Maximum Capacity | 8 × 2.0 mL |
| Timer Range | 1–99 min (digital LED display) |
| Dimensions (W × D × H) | 155 × 175 × 105 mm |
| Weight | 1.4 kg |
| Power Supply | 24 V DC |
| Motor Input/Output Power | 12 W / 8 W |
| Safety Rating | DIN EN 60529 IP30 |
| Operating Ambient Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| Rotor Exchange | Tool-Free |
| Quick-Stop Function | Yes |
| Lid Interlock | Active (operation only with lid closed) |
| Noise Level | <45 dB(A) |
| Rotor Type | Fixed-angle, universal for 0.2–2.0 mL tubes |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | IKA mini G |
| Maximum Rotor Speed | 6000 rpm |
| Relative Centrifugal Force (RCF) | 2000 × g |
| Capacity | 8 × 2.0 mL tubes |
| Max. Kinetic Energy | 20 N·m |
| Motor Input Power | 12 W |
| Motor Output Power | 8 W |
| Speed Accuracy | ±0.05% of set speed |
| Timer Range | 1–99 min (LED display) |
| Continuous Operation | Yes |
| Quick-Stop Function | Yes |
| Automatic Rotor Lock Release on Lid Opening | Yes |
| Safety Lid Lock | Yes |
| Noise Level | 48 dB(A) |
| Dimensions (W×D×H) | 155 × 105 × 175 mm |
| Weight | 1.4 kg |
| Operating Ambient Temperature | 5–40 °C |
| Max. Relative Humidity | 80% RH (non-condensing) |
| Ingress Protection | IP 30 per DIN EN 60529 |
| Voltage Supply | 100–240 V AC, 50/60 Hz |
| DC Internal Supply | 24 V = |
| Current Draw | 500 mA |
| Rotor Compatibility | Fixed-angle rotor for 2.0 mL microtubes only |
| Density Limit for Samples | ≤1.2 kg/dm³ |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | mini G |
| Maximum Capacity | 8 × 2.0 mL |
| Maximum Speed | 6000 rpm |
| Dimensions | 155 × 175 × 105 mm |
| Weight | 1.4 kg |
| Operating Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| Power Supply | 24 V DC |
| Rotor Acceleration | 2000 × g |
| Motor Input/Output Power | 12 W / 8 W |
| Timer Range | 1–99 min |
| Speed Accuracy | ±5% |
| Rotor Exchange | Tool-Free |
| Lid Interlock | Yes |
| Quick-Stop Function | Yes |
| Duty Cycle | Continuous (100%) |
| Maximum Sample Density | 1.2 kg/dm³ |
| Kinetic Energy | 20 N·m |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Mini MR standard |
| Motor Output Power | 2 W |
| Max. Stirring Volume (H2O) | 1 L |
| Speed Range | 0–2500 rpm |
| Speed Control | Analog Knob |
| Rotation Direction | Clockwise |
| Stir Bar Length Compatibility | 20–40 mm |
| Plate Material | Polyester Film |
| Plate Dimensions | 115 × 115 mm |
| Device Dimensions (W × H × D) | 115 × 37 × 129 mm |
| Weight | 0.22 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % RH |
| Ingress Protection | IP42 (per DIN EN 60529) |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Input Power | 3 W |
| DC Output | 12 V = |
| Current Draw | 300 mA |
| Plate Color | White (optimized for visual monitoring of colorimetric reactions) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Magnetic Stirrer |
| Model | Mini MR standard |
| Maximum Stirring Volume | 1 L (H₂O) |
| Speed Range | 0–2500 rpm |
| Power Input | 3 W |
| Motor Output | 2 W |
| Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class | IP42 (DIN EN 60529) |
| Voltage | 100–240 V AC, 50/60 Hz |
| DC Supply | 12 V =, Current Draw: 300 mA |
| Stir Bar Length Compatibility | 20–40 mm |
| Plate Material | Polyester film-coated steel |
| Plate Dimensions | 115 × 115 mm |
| Device Dimensions (W × H × D) | 115 × 37 × 129 mm |
| Weight | 0.22 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Mini MR Standard |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 1 L (H₂O) |
| Speed Range | 0–2500 rpm |
| Motor Input Power | 3 W |
| Motor Output Power | 2 W |
| Stir Bar Max Length | 30 mm |
| Plate Material | Polyester Film |
| Plate Dimensions | 115 × 115 mm |
| Overall Dimensions | 114 × 37 × 127 mm |
| Weight | 0.25 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP42 (per DIN EN 60529) |
| Voltage | 100–240 V AC, 50/60 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Mini TONY |
| Instrument Type | Portable Magnetic Stirrer |
| Max. Stirring Volume (H₂O) | 0.25 L |
| Speed Range | 300–1800 rpm |
| Temperature Control Range | 5–40 °C |
| Power Supply Options | Rechargeable AA batteries (NiMH) or 9 V DC adapter |
| Battery Runtime | 8–12 h |
| Charging Time | 2–3 h |
| Protection Rating | IP20 |
| Work Plate Material | Polypropylene (PP) |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| DC Output | 9 V =, 1000 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MINISTAR 20 control |
| Motor Input Power | 60 W |
| Motor Output Power | 46 W |
| Speed Range | 0/50–2000 rpm |
| Max. Viscosity | 10,000 mPa·s |
| Max. Volume (H₂O) | 15 L |
| Torque | 20 N·cm |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±3 % (at n > 300 rpm) |
| Temperature Range (with PT1000) | −10 to 350 °C |
| Temp. Measurement Accuracy | ±0.5 K (DIN EN 60751 Class A) |
| Temp. Sensor Limiting Error | ≤ ±(0.15 + 0.002× |
| Display | LCD (speed, torque, time, temp.) |
| Timer Range | 0–6000 min |
| Housing Material | Cast aluminum with thermoplastic polymer coating |
| IP Rating | IP54 |
| Dimensions (W×H×D) | 70 × 193 × 154 mm |
| Weight | 1.56 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Power Supply | 100–240 V AC, 50/60 Hz |
| USB Interface | Yes |
| Bluetooth | Yes |
| Continuous Duty Cycle | 100 % |
| Shaft Clamp Range | 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Vibration Detection | Yes (auto-shutdown) |
| Key Lock Function | Yes |
| Remote Control Range | Up to 150 m (building-dependent) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Electronic Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 15 L |
| Speed Range | 50–2000 rpm |
| Temperature Control Range | −10 °C to 350 °C |
| Max. Viscosity | 30,000 mPa·s |
| Motor Output Power | 46 W |
| Torque | 40 N·cm |
| IP Rating | IP54 |
| Dimensions (W×H×D) | 70 × 193 × 154 mm |
| Weight | 1.72 kg |
| Power Supply | 100–240 V AC, 50/60 Hz |
| USB Interface | Yes |
| Bluetooth | Yes |
| PT1000 Temperature Sensor Support | Yes |
| Continuous Duty Cycle | 100% |
| Enclosure Material | Anodized Aluminum Housing with Thermoplastic Polymer Coating |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MINISTAR 20 digital |
| Max. Stirring Volume (H₂O) | 15 L |
| Motor Input Power | 60 W |
| Motor Output Power | 46 W |
| Drive Type | Brushless DC Motor |
| Speed Range | 0/50–2000 rpm |
| Speed Display | LED |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Viscosity | 10,000 mPa·s |
| Max. Output Torque | 20 N·cm |
| Continuous Duty Cycle | 100 % |
| Shaft Clamp Type | Fixed Chuck |
| Clamp Range | Ø 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Rated Torque | 0.075 N·m |
| Housing Material | Cast Aluminum Coated / Thermoplastic Polymer |
| Dimensions (W × H × D) | 70 × 193 × 147 mm |
| Weight | 1.56 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 (DIN EN 60529) |
| USB Interface | Yes |
| Input Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Device Input Power | 69 W |
| Standby Power Consumption | 0.5 W |
| DC Supply | 24 V = |
| Current Draw | 2900 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Digital Overhead Stirrer |
| Model | MINISTAR 20 digital |
| Maximum Mixing Volume | 15 L (H₂O) |
| Speed Range | 0/50–2000 rpm |
| Motor Type | Brushless DC Motor |
| Max Torque | 20 N·cm |
| Power Input | 69 W |
| Dimensions (W×H×D) | 70 × 193 × 147 mm |
| Weight | 1.56 kg |
| Protection Rating | IP54 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| USB Interface | Yes |
| Voltage | 100–240 V AC, 50/60 Hz |
| Standby Power Consumption | 0.5 W |
| Shaft Clamp Range | 0.5–8 mm |
| Hollow Shaft ID | 8.5 mm |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MINISTAR 40 control |
| Max. Stirring Volume (H₂O) | 25 L |
| Motor Input Power | 60 W |
| Motor Output Power | 46 W |
| Drive Type | Brushless DC Motor |
| Speed Range | 0/30–1000 rpm |
| Speed Display | LCD |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1% (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Viscosity | 30,000 mPa·s |
| Max. Output Torque | 40 N·cm |
| Continuous Duty Cycle | 100% |
| Torque Display | Yes |
| Torque Measurement Deviation | ±4 N·cm |
| Temperature Interface | PT1000 |
| Temp. Display | Yes |
| Temp. Range | –10 to 350 °C |
| Temp. Accuracy | ±0.5 K (DIN EN 60751 Class A) |
| Clamp Shaft Diameter Range | 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Timer | Yes |
| Timer Range | 1–6000 min |
| Housing Material | Cast Aluminum Coated / Thermoplastic Polymer |
| Dimensions (W×H×D) | 70 × 193 × 154 mm |
| Weight | 1.72 kg |
| Ambient Temp. Range | 5–40 °C |
| Relative Humidity Limit | 80% |
| Protection Rating | IP54 |
| USB Interface | Yes |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Instrument Input Power | 69 W |
| DC Supply | 24 V = |
| Current Draw | 2900 mA |
| Vibration Detection | Yes (Auto-shutdown on excessive vibration) |
| Bluetooth | Yes |
| Software Compatibility | labworldsoft® |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Model | MINISTAR 40 control |
| Motor Type | Brushless DC |
| Max. Mixing Volume (H₂O) | 25 L |
| Speed Range | 30–1000 rpm |
| Speed Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Viscosity | 30,000 mPa·s |
| Torque Output | 40 N·cm |
| Temp. Range (with PT1000 sensor) | −10 °C to +350 °C |
| Temp. Accuracy | ±0.05 K (DIN IEC 751 Class A) |
| Display | LCD with real-time speed, torque, temperature, timer |
| Connectivity | USB, Bluetooth, labworldsoft® integration |
| IP Rating | IP54 |
| Dimensions | 70 × 193 × 154 mm |
| Weight | 1.72 kg |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Continuous Duty Cycle | 100% |
| Housing | Anodized aluminum + chemically resistant thermoplastic polymer |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MINISTAR 40 digital |
| Max. Stirring Volume (H₂O) | 25 L |
| Motor Input Power | 60 W |
| Motor Output Power | 46 W |
| Drive Type | Brushless DC Motor |
| Speed Range | 0/50–1000 rpm |
| Speed Display | LED |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Viscosity | 30,000 mPa·s |
| Max. Output Torque | 40 N·cm |
| Continuous Duty Cycle | 100 % |
| Shaft Clamp Type | Fixed Chuck |
| Clamp Diameter Range | 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Rated Torque | 0.4 N·m |
| Housing Material | Die-cast aluminum with thermoplastic polymer coating |
| Dimensions (W×H×D) | 70 × 193 × 147 mm |
| Weight | 1.72 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 (per DIN EN 60529) |
| USB Interface | Yes |
| Input Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Device Input Power | 69 W |
| Standby Power Consumption | 0.5 W |
| DC Supply | 24 V = |
| Current Draw | 2900 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Digital Overhead Stirrer |
| Model | MINISTAR 40 digital |
| Max. Mixing Volume (H₂O) | 25 L |
| Speed Range | 0/50–1000 rpm |
| Motor Type | Brushless DC Motor |
| Max. Torque | 40 N·cm |
| Power Input | 69 W |
| Dimensions (W×H×D) | 70 × 193 × 147 mm |
| Weight | 1.72 kg |
| IP Rating | IP54 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| USB Interface | Yes |
| Voltage | 100–240 V AC, 50/60 Hz |
| Standby Power Consumption | 0.5 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MINISTAR 80 control |
| Motor Input Power | 60 W |
| Motor Output Power | 46 W |
| Speed Range | 0/30 – 500 rpm |
| Max. Viscosity | 60,000 mPa·s |
| Max. Stirring Volume (H₂O) | 50 L |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1% (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Torque | 80 N·cm |
| Torque Measurement Deviation | ±8 N·cm |
| Temperature Range (with PT1000) | −10 to 350 °C |
| Temp. Measurement Accuracy | ±0.5 K (DIN EN 60751 Class A) |
| Temp. Display Resolution | 0.1 K |
| Timer Range | 0–6000 min |
| IP Rating | IP54 |
| Dimensions (W×H×D) | 70 × 193 × 154 mm |
| Weight | 1.72 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Power Supply | 100–240 V AC, 50/60 Hz |
| USB Interface | Yes |
| Bluetooth | Yes |
| Housing Material | Cast aluminum coated + thermoplastic polymer |
| Shaft Clamp Range | Ø 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Continuous Duty Cycle | 100% |
| Microprocessor Control | Yes |
| Key Lock Function | Yes |
| Vibration Detection & Auto-Shutdown | Yes |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Electronic Overhead Stirrer |
| Max. Mixing Volume | 25 L (H₂O) |
| Speed Range | 30–500 rpm |
| Temperature Control Range | –10 °C to 350 °C |
| Max. Viscosity | 8,000 mPa·s |
| Motor Output Power | 46 W |
| Max. Torque | 0.8 N·m (80 N·cm) |
| Display | LCD with Real-Time Speed, Torque & Temp Readout |
| Interface | USB, PT1000 Temperature Sensor Input, Key-Lock Function |
| Protection Rating | IP54 |
| Dimensions | 70 × 144 × 130 mm |
| Weight | 1.72 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MINISTAR 80 digital |
| Max. Stirring Volume (H₂O) | 50 L |
| Motor Input Power | 60 W |
| Motor Output Power | 46 W |
| Drive Type | Brushless DC Motor |
| Speed Range | 0/50–500 rpm |
| Speed Display | LED |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Viscosity | 60,000 mPa·s |
| Max. Output Torque | 80 N·cm |
| Continuous Duty Cycle | 100 % |
| Stirrer Shaft Clamp | Fixed Chuck |
| Chuck Diameter Range | 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Rated Torque | 0.8 N·m |
| Housing Material | Cast Aluminum Coated / Thermoplastic Polymer |
| Dimensions (W × H × D) | 70 × 193 × 147 mm |
| Weight | 1.72 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 (DIN EN 60529) |
| USB Interface | Yes |
| Input Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Device Input Power | 69 W |
| Standby Power Consumption | 0.5 W |
| DC Supply | 24 V = |
| Current Draw | 2900 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Digital Overhead Stirrer |
| Model | MINISTAR 80 digital |
| Max. Mixing Volume (H₂O) | 50 L |
| Speed Range | 0/50–500 rpm |
| Max. Torque | 80 N·cm |
| Motor Type | Brushless DC Motor |
| Power Input | 69 W |
| Dimensions (W×H×D) | 70 × 193 × 147 mm |
| Weight | 1.72 kg |
| IP Rating | IP54 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| USB Interface | Yes |
| Voltage | 100–240 V AC, 50/60 Hz |
| Max. Viscosity | 60,000 mPa·s |
| Shaft Clamp Range | 0.5–8 mm |
| Hollow Shaft ID | 8.5 mm |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | MIXSTER |
| Instrument Type | Modular Magnetic Stirrer & Vortex Shaker |
| Max. Stirring Volume | 5 L (H₂O) |
| Speed Range | 100–3000 rpm |
| Temperature Operation | Ambient (RT), IP66-rated |
| Motor Output | 5 W |
| Dimensions | 135 × 24 × 135 mm |
| Weight | 0.6 kg |
| Power Input | 100–240 V, 50/60 Hz |
| Protection Class | IP66 |
| Interface Options | RS232 / USB / Bluetooth / Wi-Fi (optional) |
| Control | Touch-sensitive capacitive interface with 360° LED ring display |
| Beaker Recognition | Integrated optical detection system |
| Auto-start | Capacitive activation via vessel or accessory contact |
| Programmable Modes | Intermittent operation, reverse rotation, viscosity trend monitoring, jump detection, timer (6 s – 1 min), graphical speed profiles |
| Expandable Configuration | Up to 30 units via HUB (2–16 units standalone |
| Stirring Points | Single-point base unit |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | MS 3 control |
| Speed Range | 100–3000 rpm |
| Operation Modes | Continuous, Pulse (Touch), Adjustable Speed |
| Motion Type | Orbital (Circular) |
| Platform Material | Die-cast Aluminum / ABS Housing |
| Amplitude | 4.5 mm |
| Display | LCD Speed & Timer |
| Interface | USB, RS-232 |
| Protection Rating | IP21 |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Input Power | 20 W |
| Dimensions (W × D × H) | 148 × 63 × 205 mm |
| Weight | 2.9 kg |
| Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH (non-condensing) |
| Max Load Capacity (incl. clamp) | 0.5 kg |
| Speed Accuracy | ±1 % |
| Timer Range | 1 s – 3599 min |
| Duty Cycle | 100 % continuous operation |
| Motor Output Power | 8 W |
| Motor Input Power | 10 W |
| DC Supply | 24 V =, 800 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MS3 Basic / MS3 Digital |
| Operating Principle | Orbital Shaking |
| Orbit Diameter | 4.5 mm |
| Max Load Capacity (incl. fixture) | 0.5 kg |
| Speed Range | 200–3000 rpm |
| Min Adjustable Speed | 200 rpm |
| Speed Display | Analog scale (Basic) / Digital LED (Digital) |
| Timer | None (Basic) / Countdown timer with auto-shutoff (Digital) |
| Operating Modes | Mode A (safety mode with pad detection: ≤3000 rpm with standard pad, ≤1300 rpm with non-standard pad) / Mode B (no pad detection: up to 3000 rpm with any pad) |
| Duty Cycle | 100% continuous operation |
| Motor Input Power | 10 W |
| Motor Output Power | 8 W |
| Supply Voltage | 100–240 V AC, 50/60 Hz |
| Power Consumption | 20 W (24 V DC, 800 mA internal supply) |
| Dimensions (W×D×H) | 148 × 63 × 205 mm |
| Weight | 2.9 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% RH |
| Ingress Protection | IP21 (per DIN EN 60529) |
| Microplate Compatibility | Single 96-well plate |
| Footprint | Benchtop |
| Housing Material | Zinc-coated cast iron |
| Vibration Damping | Integrated rubber feet |
| Safety Compliance | CE, RoHS, IEC 61010-1 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MS3 Basic / MS3 Digital |
| Operating Mode | Timer & Continuous Operation |
| Vibration Type | Orbital |
| Housing Material | Zinc-Plated Cast Iron |
| Amplitude | 4.5 mm |
| Speed Range | 0–3000 rpm |
| Minimum Adjustable Speed | 200 rpm |
| Max Load Capacity (incl. fixture) | 0.5 kg |
| Timer Range (Digital) | 1 s – 999 min |
| Display | Analog scale (Basic) / LED 7-segment timer display (Digital) |
| Power Input | 100–240 V, 50/60 Hz |
| IP Rating | IP21 |
| Dimensions (W×H×D) | 148 × 205 × 63 mm |
| Weight | 2.9 kg |
| Compliance | DIN EN 60529 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model Series | MS3 Basic, MS3 Digital, MS3 Control |
| Operating Modes | Continuous / Touch-Start / Adjustable Speed |
| Speed Range | 0–3000 rpm (MS3 Basic/Digital), 100–3000 rpm (MS3 Control) |
| Motion Type | Circular Orbit |
| Orbit Diameter | 4.5 mm |
| Housing Material | Zinc-Alloy (Basic/Digital), Zinc-Alloy with Reinforced Base (Control) |
| Speed Display | Analog Scale (Basic), LED Numeric (Digital), LCD with ±1% Accuracy (Control) |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% |
| Ingress Protection | IP21 |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Input Power | 20 W |
| Dimensions (W×D×H) | 148 × 63 × 205 mm |
| Weight | 2.9 kg (Basic/Digital), 3.16 kg (Control) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | IKA MultiDrive Basic |
| Instrument Type | Grinder |
| Sample Suitability | Hard materials |
| Output Particle Size | ≥ 0.5 mm |
| Motor Input Power | 1000 W |
| Motor Output Power | 800 W |
| Speed Range | 3000 – 20000 rpm |
| Speed Accuracy | ±5 % |
| Duty Cycle | 5 min ON / 10 min OFF |
| Motor Type | Brushless DC Motor |
| Display | 7-segment LED |
| Chamber Recognition | Yes |
| Dimensions (W × D × H) | 300 × 350 × 250 mm |
| Weight | 8.5 kg |
| Ambient Temperature Range | 5 – 40 °C |
| Relative Humidity Limit | ≤ 80 % RH |
| Ingress Protection | IP 31 (per DIN EN 60529) |
| USB Interface | Yes |
| Voltage | 220 – 240 V AC |
| Frequency | 50/60 Hz |
| Optional Voltages | 100 – 120 V, 100 V, 230 V |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | MultiDrive Basic |
| Type | High-Speed Rotational Grinder |
| Sample Suitability | Hard, brittle, fibrous, and soft materials |
| Max. Feed Size | < 7 mm |
| Final Particle Size | ≤ 0.01 mm (10 µm) |
| Batch Capacity | 2000 mL |
| Drive Power | 1000 W (input), 800 W (output) |
| Speed Range | 3,000 – 20,000 rpm |
| Speed Accuracy | ±5% |
| Cooling | Integrated water-jacketed grinding chamber (dry-ice compatible) |
| Grinding Chamber Material | Stainless steel 1.4301 |
| Cutting Tools | Stainless steel 1.4034 |
| Duty Cycle | 5 min ON / 10 min OFF |
| Dimensions (W × D × H) | 300 × 450 × 250 mm |
| Weight | 8.5 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Protection Class | IP31 (DIN EN 60529) |
| Electrical Supply | 230 V / 50–60 Hz (also compatible with 100–120 V variants) |
| USB Interface | Yes (for parameter export and documentation) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MultiDrive Control BT Package |
| Instrument Type | Grinder |
| Sample Applicability | Hard Materials |
| Final Particle Size | < 0.01 mm |
| Motor Input Power | 1000 W |
| Motor Output Power | 800 W |
| Speed Range | 3000 – 20,000 rpm |
| Speed Accuracy | ±5 % |
| Duty Cycle | 5 min ON / 10 min OFF |
| Motor Type | Brushless DC Motor |
| Display | TFT Touchscreen |
| RFID Reader | Yes |
| Temperature Monitoring | Yes |
| Temp. Resolution | 0.1 K |
| Temp. Accuracy | ±1 K |
| Temp. Range | –50 °C to +120 °C |
| Maintenance Timer | Yes |
| Integrated Weighing | Yes |
| Weighing Range | 5 – 4000 g |
| Weighing Resolution | 1 g |
| Max. Load Capacity | 4 kg |
| Weighing Accuracy | ±(0.3% + 2) g |
| Vessel Recognition | Yes |
| Programmable Protocols | Yes |
| Dimensions (W × D × H) | 300 × 350 × 250 mm |
| Weight | 8.5 kg |
| Ambient Operating Temp. | 5 – 40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Ingress Protection | IP31 (DIN EN 60529) |
| Connectivity | USB + Bluetooth |
| Voltage | 220–240 V AC, 50/60 Hz (also compatible with 100–120 V / 100–115 V variants) |
| Compliance | CE, RoHS, UL/cUL listed |