Common Laboratory Equipment
Filter
Showing 7351–7380 of 18118 results
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LR-2.ST |
| Pricing | Available Upon Request |
| Capacity | 2 L (Single-Wall & Jacketed Borosilicate Glass Vessel) |
| Temperature Range | Ambient to 230 °C |
| Vacuum Capability | Down to 25 mbar |
| Max. Viscosity | 150,000 mPa·s |
| Speed Range | 8–290 rpm |
| Lift Stroke | 390 mm |
| Minimum Working Volume | 500 mL |
| Maximum Working Volume | 2000 mL |
| Sealing Material | FFPM (Fluoroelastomer, up to 230 °C) |
| Wetted Materials | Borosilicate Glass 3.3, FFPM, PTFE, Stainless Steel 1.4571 |
| Port Configuration | 3 × NS 29/32, 2 × NS 14/23 |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 25 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Protection Rating | IP 42 (DIN EN 60529) |
| Interface | RS-232, Analog Output |
| Power Supply | 230 V, 50/60 Hz |
| Input Power | 130 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | LR-2.ST |
| Configuration | Single-Wall Glass Reactor Vessel LR 2.1 |
| Minimum Working Volume | 500 mL |
| Maximum Working Volume | 2000 mL |
| Temperature Range | Ambient to 230 °C |
| Vacuum Capability | Down to 25 mbar |
| Maximum Viscosity Handling | 150,000 mPa·s |
| Speed Range | 8–290 rpm |
| Vertical Travel of Lifting Stand | 390 mm |
| Materials in Contact with Sample | Borosilicate Glass (DIN ISO 3585), FFPM Seals, PTFE, Stainless Steel 1.4571 |
| Port Configuration | 3 × NS 29/32 + 2 × NS 14/23 |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 25 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Ingress Protection | IP 42 |
| Communication Interfaces | RS 232, Analog Output (0–10 V) |
| Power Supply | 230 V, 50/60 Hz |
| Rated Input Power | 130 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | LR-2.ST Starvisc 200 |
| Working Volume | 500–2000 mL |
| Temperature Range | Ambient to 230 °C |
| Vacuum Capability | Down to 25 mbar |
| Max. Viscosity | 100,000 mPa·s |
| Min. Agitation Speed | 6 rpm |
| Lift Stroke | 390 mm |
| Stirring Shaft Max. Torque | 200 N·cm |
| Wetted Materials | Borosilicate Glass (DIN ISO 3585), FFPM, PTFE, Stainless Steel 1.4571 |
| Reactor Opening Configuration | 3× NS 29/32 + 2× NS 14/23 |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 25 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | LR-2.ST the Allrounder |
| Usable Volume | 500–2000 mL |
| Temperature Range | Ambient to 230 °C |
| Vacuum Capability | Down to 25 mbar |
| Max. Viscosity | 100,000 mPa·s |
| Speed Range | 8–290 rpm |
| Lifting Stroke | 390 mm |
| Wetted Materials | Borosilicate Glass (DIN ISO 3585), FFPM, PTFE, Stainless Steel 1.4571 |
| Reactor Opening | 3 × NS 29/32, 2 × NS 14/23 |
| Max. Stirring Torque | 200 N·cm |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 25 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Control | Microprocessor-based speed regulation with load-compensated stability |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Model | LR-2.ST the Allrounder |
| Reactor Type | Jacketed Glass Reactor System |
| Working Volume | 0.5–2.0 L |
| Maximum Operating Pressure | Up to 6 bar (gauge) |
| Vacuum Capability | ≤25 mbar (abs) |
| Temperature Range | Ambient to +230 °C |
| Speed Range | 8–290 rpm |
| Max. Torque | 120 N·cm |
| Max. Viscosity | 100,000 mPa·s |
| Drive Motor | EUROSTAR 200 control motor with microprocessor-based speed regulation |
| Sealing Material | FFPM (perfluoroelastomer) for solvent and high-temp resistance |
| Wetted Parts | Borosilicate glass 3.3, PTFE, FFPM, 1.4571 stainless steel |
| Port Configuration | 3 × NS 29/32 + 2 × NS 14/23 standard ground glass joints |
| Vertical Travel of Lift Stand | 390 mm |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 25 kg |
| Power Supply | 115 V, 50/60 Hz |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | LR-2.ST the Compact Power |
| Usable Volume | 500–2000 mL |
| Temperature Range | Ambient to 230 °C |
| Vacuum Capability | Down to 25 mbar |
| Max. Viscosity Handling | 50,000 mPa·s |
| Speed Range | 8–290 rpm |
| Lifting Stroke | 390 mm |
| Wetted Materials | Borosilicate Glass (DIN ISO 3585), FFPM, PTFE, Stainless Steel 1.4571 |
| Reactor Opening Configuration | 3× NS 29/32 + 2× NS 14/23 |
| Max. Stirring Torque | 60 N·cm |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 25 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Control | Microprocessor-based speed regulation with load compensation |
| Safety | Integrated safety switch, motor torque monitoring, overheat protection |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | LR-2.ST the High-Performer |
| Usable Volume | 500–2000 mL |
| Temperature Range | Ambient to 230 °C |
| Vacuum Capability | Down to 25 mbar |
| Max. Viscosity Handling | 150,000 mPa·s |
| Speed Range | 8–290 rpm |
| Lifting Column Travel | 390 mm |
| Wetted Materials | Borosilicate Glass (DIN ISO 3585), FFPM, PTFE, Stainless Steel 1.4571 |
| Reactor Opening Configuration | 3× NS 29/32 + 2× NS 14/23 |
| Max. Stirring Torque | 660 N·cm |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 25 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Imported |
| Model | LR-2.ST the High-Performer |
| Instrument Category | Laboratory Reactor |
| Usable Volume | 0.5–2 L |
| Vessel Material | Borosilicate Glass (DIN ISO 3585), Stainless Steel 1.4571 (AISI 316Ti), FFPM & PTFE Seals |
| Operating Pressure Range | Up to 6 bar (gauge), Down to 25 mbar (absolute vacuum) |
| Temperature Range | Ambient to +230 °C |
| Vacuum Capability | ≤25 mbar (absolute) |
| Max. Viscosity Handling | 150,000 mPa·s |
| Speed Range | 8–290 rpm |
| Torque-Controlled Speed Stability | Microprocessor-regulated, load-compensated |
| Vertical Travel of Lifting Column | 390 mm |
| Port Configuration | 3 × NS 29/32, 2 × NS 14/23 |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 25 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH (non-condensing) |
| Power Supply | 115 V, 50/60 Hz |
| Compliance | CE, UL Listed, Designed per EN 61000-6-2 / EN 61000-6-4 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | LR-2.ST the Versatile |
| Usable Volume | 500–2000 mL |
| Temperature Range | Ambient to 230 °C |
| Vacuum Capability | Down to 25 mbar |
| Max. Viscosity Handling | 70,000 mPa·s |
| Speed Range | 8–290 rpm |
| Lifting Column Travel | 390 mm |
| Wetted Materials | Borosilicate Glass (DIN ISO 3585), FFPM, PTFE, Stainless Steel 1.4571 |
| Reactor Opening Configuration | 3× NS 29/32 + 2× NS 14/23 |
| Max. Stirring Torque | 100 N·cm |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 34 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Control | Microprocessor-based speed regulation with load-compensated stability |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Modular Benchtop Reactor System |
| Model | LR-2.ST the Versatile |
| Vessel Capacity | 2 L (500–2000 mL usable volume) |
| Operating Pressure Range | Up to 6 bar (gauge), down to 25 mbar absolute vacuum |
| Temperature Range | Ambient to +230 °C |
| Speed Range | 8–290 rpm |
| Max. Torque | 100 N·cm |
| Max. Viscosity Handling | 70,000 mPa·s |
| Drive Motor | EUROSTAR 100 control-type stirrer with bidirectional rotation |
| Sealing Material in Contact | FFPM (perfluoroelastomer), PTFE, borosilicate glass 3.3, stainless steel 1.4571 (AISI 316Ti) |
| Port Configuration | 3 × NS 29/32, 2 × NS 14/23 |
| Vertical Travel of Lift Stand | 390 mm |
| Dimensions (W × H × D) | 460 × 1240 × 430 mm |
| Weight | 34 kg |
| Power Supply | 115 V, 50/60 Hz |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH (non-condensing) |
| Control Interface | Removable WiCo wireless controller with real-time torque trend display and microprocessor-based speed regulation |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | M 20 Universal Mill |
| Instrument Type | Grinder |
| Sample Applicability | Hard, brittle materials |
| Feed Particle Size | < 7 mm |
| Output Particle Size | 1–80 µm |
| Batch Grinding Capacity | 250 mL |
| Grinding Media | Stainless steel cutting head (1.4034) and grinding chamber (1.4301) |
| Motor Input Power | 450 W |
| Motor Output Power | 225 W |
| Max. Speed | 20,000 rpm |
| Max. Peripheral Speed | 72 m/s |
| Max. Feed Hardness | 5 Mohs |
| Operating Cycle | 7 min ON / 10 min OFF |
| Cooling | Water-jacketed chamber (external coolant connection) or dry ice cooling |
| Dimensions (W × H × D) | 170 × 350 × 170 mm |
| Weight | 6.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤ 80 % |
| Protection Class | IP 21 (DIN EN 60529) |
| Voltage | 230 / 115 / 100 V |
| Frequency | 50/60 Hz |
| Total Input Power | 550 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | M20 |
| Price | Upon Request |
| Grinding Principle | Shear/Impact |
| Motor Input Power | 440 W |
| Motor Output Power | 225 W |
| Max Speed | 20,000 rpm |
| Max Peripheral Speed | 72 m/s |
| Max Working Volume | 250 mL |
| Max Feed Hardness | 5 Mohs |
| Max Feed Particle Size | 7 mm |
| Rotor Material | Stainless Steel 1.4034 |
| Grinding Chamber Material | Stainless Steel 1.4301 |
| Duty Cycle | 7 min ON / 10 min OFF |
| Jacketed Chamber with Water Cooling | Yes |
| Dry Ice Cooling in Chamber | Yes |
| Liquid Nitrogen Cooling in Chamber | No |
| Dimensions (W × H × D) | 170 × 350 × 170 mm |
| Weight | 6.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP21 |
| RS232 Interface | No |
| Analog Output | No |
| Voltage | 230 / 115 V |
| Frequency | 50 / 60 Hz |
| Instrument Input Power | 440 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | M20 |
| Instrument Type | Laboratory Grinder |
| Sample Suitability | Hard and Brittle Materials (Dry Grinding Only) |
| Final Particle Size | < 0.01 mm |
| Motor Input/Output Power | 440 W / 225 W |
| No-Load Speed | 20,000 rpm |
| Tip Speed | 72 m/s |
| Grinding Chamber Volume | 250 mL |
| Chamber & Lid Material | Stainless Steel AISI 304 |
| Duty Cycle | 7 min ON / 10 min OFF |
| Max. Feed Particle Size | 6–7 mm |
| Dimensions (W×D×H) | 170 × 170 × 350 mm |
| Weight | 6.6 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Ingress Protection Rating | IP21 |
| Cooling | External Jacketed Chamber with Water Circulation Ports |
| Dual-Chamber Capability | Yes (Shared Motor Drive) |
| Safety | Integrated Current-Limiting Overload Protection |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | M20 |
| Motor Input Power | 620 W |
| Motor Output Power | 260 W |
| Max. Speed | 20000 rpm |
| Max. Peripheral Speed | 72 m/s |
| Max. Working Volume | 250 mL |
| Max. Feed Hardness | 5 Mohs |
| Max. Feed Size | 7 mm |
| Rotor & Cutting Tools Material | Stainless Steel 1.4034 |
| Grinding Chamber Material | Stainless Steel 1.4301 |
| Duty Cycle | 7 min ON / 10 min OFF |
| Jacketed Chamber with Water Cooling | Yes |
| Dry Ice Cooling Compatibility | Yes |
| Liquid Nitrogen Cooling | No |
| Dimensions (W × D × H) | 170 × 350 × 170 mm |
| Weight | 6.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP21 |
| Voltage | 230 / 115 V |
| Frequency | 50 / 60 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | General Distributor |
| Origin Category | Imported |
| Model | M 20 Universal Mill |
| Price | Upon Request |
| Motor Input Power | 450 W |
| Motor Output Power | 225 W |
| Max. Speed | 20,000 rpm |
| Max. Peripheral Speed | 72 m/s |
| Max. Working Volume | 250 mL |
| Max. Feed Hardness | 5 Mohs |
| Max. Feed Particle Size | 7 mm |
| Rotor/Cutting Tool Material | Stainless Steel 1.4034 |
| Grinding Chamber Material | Stainless Steel 1.4301 |
| Operating Time (ON) | 7 min |
| Cooling Interval (OFF) | 10 min |
| Jacketed Grinding Chamber (Water-Coolable) | Yes |
| Dry-Ice Cooling Compatible | Yes |
| Dimensions (W × H × D) | 170 × 350 × 170 mm |
| Weight | 6.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Ingress Protection | IP21 (per DIN EN 60529) |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Total Instrument Input Power | 550 W |
| Optional Voltages | 230 V / 115 V / 100 V |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | magic LAB |
| Pricing | Upon Request |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | magic PLANT |
| Vessel Capacity | Small-scale (typically 1–20 L) |
| Construction Material | Stainless Steel (AISI 316L) |
| Maximum Operating Pressure | Up to 10 bar (g) |
| Configuration Options | Batch, In-line Circulation, Powder Processing |
| Modular Integration | Compatible with IKA magic LAB® and ULTRA-TURRAX® UTC T25 modules |
| Thermal Management | Jacketed Vessel with Steam/Electric/Thermostatic Fluid Heating & Cooling |
| Drive Type | Digital Speed-Controlled Torque Motor |
| Sealing | Mechanical Seal or Magnetic Coupling (pressure-rated) |
| Compliance | CE, PED 2014/68/EU, ATEX Option Available |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | magic PLANT |
| Pricing | Available Upon Request |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | magicLAB |
| Application | Laboratory-to-Pilot-to-Production Scale-Up Homogenization, Wet Milling, and Dispersion |
| Operation Modes | Batch, Circulation, and Continuous |
| Rotor-Stator Tip Speed | Up to 40 m/s |
| Temperature Control | Integrated Heating & Cooling in All Modules |
| Controller | magicLAB® Touchscreen Interface (Standard) |
| Compliance | Designed for GLP/GMP-Ready Environments |
| Module Expansion | Standardized Modular Architecture |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | Matrix Delta Plus |
| Temperature Range | –30 °C to +110 °C |
| Temperature Accuracy | ±1 °C (at setpoint) |
| Temperature Stability | ±0.5 °C |
| Temperature Homogeneity | ±0.5 °C (within block) |
| Heating Rate | 5.5 °C/min (max) |
| Cooling Rate | 2 °C/min (from ambient down to –30 °C) |
| Max Load Capacity | 0.3 kg |
| Timer Range | 1 s – 6000 min |
| Display | TFT LCD |
| Programmable Ramp Rates | Yes |
| Heating Power | 100 W |
| Cooling Power | 72 W |
| Integrated Peltier Cooling | Yes |
| Interchangeable Modules | Up to 10 standard configurations |
| Safety Cut-off | 145 °C |
| Dimensions (W × D × H) | 216 × 127 × 351 mm |
| Net Weight | 9.5 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Ingress Protection | IP21 |
| Interfaces | RS232, USB |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Max Input Power | 230 W |
| Operating Modes | Timer, Continuous, Program |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Type | Magnetic Stirrer |
| Model | Maxi MR 1 |
| Maximum Stirring Volume | 150 L (H₂O) |
| Speed Range | 0–600 rpm |
| Display | LED/LCD Digital Speed Readout |
| Timer Function | 0–56 min or Continuous Operation |
| Motor Input Power | 80 W |
| Motor Output Power | 35 W |
| Max Stir Bar Length | 155 mm |
| Plate Material | Stainless Steel 1.4301 (AISI 304) |
| Plate Dimensions | 500 × 500 mm |
| Overall Dimensions | 505 × 110 × 585 mm |
| Weight | 16 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Ingress Protection | IP21 |
| Voltage | 230 V / 100–120 V |
| Frequency | 50/60 Hz |
| Compliance | DIN EN 60529 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Product Category | Imported |
| Model | Maxi MR 1 digital |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 150 L (H₂O) |
| Speed Range | 0–600 rpm |
| Motor Output Power | 35 W |
| Stir Bar Max Length | 155 mm |
| Working Plate Material | Stainless Steel 1.4301 |
| Plate Dimensions | 500 × 500 mm |
| Timer Range | 0–56 min (or continuous) |
| Interface | RS 232 and USB |
| Protection Rating | IP21 |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Input Voltage | 230 V / 100–120 V |
| Frequency | 50/60 Hz |
| Input Power | 80 W |
| Net Weight | 21.36 kg |
| Dimensions (W × H × D) | 505 × 110 × 585 mm |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Maxi MR 1 |
| Display | LED digital speed & timer |
| Speed Range | 0–600 rpm |
| Max. Stirring Volume (H₂O) | 150 L per position |
| Stirring Position | 1 |
| Max. Stir Bar Length | 155 mm |
| Motor Input Power | 80 W |
| Motor Output Power | 35 W |
| Plate Material | Stainless Steel 1.4301 |
| Plate Dimensions | 500 × 500 mm |
| Overall Dimensions | 505 × 110 × 585 mm |
| Weight | 16 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Class | IP21 (DIN EN 60529) |
| Voltage | 230 V / 100–120 V |
| Frequency | 50/60 Hz |
| Timer Range | 0–56 min or continuous operation |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF 10 basic Microfine Grinder Drive |
| Motor Input Power | 1000 W |
| Motor Output Power | 500 W |
| Speed Range | 3000 – 6500 rpm |
| Continuous Operation Time | 120 min (ON) / 30 min (OFF) |
| Cooling | Dry ice compatible in grinding chamber |
| Dimensions (W × D × H) | 320 × 380 × 300 mm |
| Weight | 9.7 kg |
| Ambient Temperature Range | 5 – 40 °C |
| Relative Humidity Limit | ≤80 % |
| Protection Class | IP 22 (DIN EN 60529) |
| Voltage | 230 V, 50/60 Hz |
| Optional Voltages | 115 V or 100–115 V |
| Grinding Principle | Shear and Impact |
| Material Contact Surfaces | Stainless Steel |
| Grind Head & Sieve | Sold Separately |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Benchtop Microfine Grinder |
| Model | MF 10 basic |
| Input Power | 1000 W |
| Output Power | 500 W |
| Speed Range | 3000–6500 rpm |
| Max. Feed Size | <15 mm |
| Final Particle Size | 0.01–0.5 mm (typical output ≤0.25 mm with appropriate sieve) |
| Continuous Operation Time | up to 120 min |
| Cooling | Optional dry ice cooling in grinding chamber |
| Dimensions (W×D×H) | 320 × 380 × 300 mm |
| Weight | 9.7 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class | IP22 (DIN EN 60529) |
| Voltage/Frequency | 230 V / 50 Hz or 115 V / 60 Hz |
| Grinding Principle | High-speed shear and impact |
| Material Contact Parts | Stainless steel (AISI 304) |
| Sieve & Grinding Head | Sold separately |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF 10.1 |
| Maximum Peripheral Speed | 24.5 m/s |
| Maximum Feed Particle Size | 15 mm |
| Grinding Chamber Material | Stainless Steel 1.4308 (AISI 304 equivalent) |
| Cooling Capability | Dry Ice Integration in Grinding Chamber |
| Dimensions (W × D × H) | 320 × 560 × 300 mm |
| Weight | 2.633 kg |
| Sieve Compatibility | Interchangeable stainless steel sieves (optional, not included) |
| Collection Vessel | Standard NS 29 threaded container |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF 10.2 Impact Grinding Head |
| Operating Principle | Impact Milling |
| Maximum Peripheral Speed | 34 m/s |
| Maximum Feed Hardness | 6 Mohs |
| Maximum Feed Particle Size | 10 mm |
| Grinding Chamber Material | Stainless Steel 1.4308 (AISI 304 equivalent) |
| Cooling Option | Dry Ice Insertion in Grinding Chamber |
| Dimensions (W × D × H) | 320 × 450 × 300 mm |
| Weight | 2.942 kg |
| Sieve Compatibility | Interchangeable stainless steel sieves (sold separately) |
| Collection Vessel | Standard NS 29 threaded container |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Type | Impact Grinding Head for Laboratory Milling Systems |
| Model | MF 10.2 |
| Application | Dry grinding of brittle, hard materials (e.g., minerals, construction aggregates) |
| Max. Feed Hardness | 6 Mohs |
| Max. Feed Size | <10 mm |
| Output Particle Size Range | 0.01–0.5 mm (screen-dependent) |
| Typical Final Output Size | <0.25 mm (with standard 0.25 mm sieve) |
| Grinding Chamber Material | Stainless Steel 1.4308 (AISI 304 equivalent) |
| Max. Peripheral Speed | 34 m/s |
| Cooling Option | Dry ice cooling compatible |
| Dimensions (W × D × H) | 320 × 450 × 300 mm |
| Weight | 2.942 kg |
| Compliance | CE-marked, designed per EN 61000-6-2/6-4 and EN 60204-1 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF10 |
| Instrument Type | Grinder |
| Sample Applicability | Hard and brittle materials |
| Output Particle Size | < 0.01 mm |
| Motor Input/Output Power | 1000 / 500 W |
| Speed Range | 3000–6500 rpm |
| Tip Linear Velocity (MF10.1 Shear Rotor) | 22.5 m/s |
| Tip Linear Velocity (MF10.2 Impact Rotor) | 31.4 m/s |
| Wetted Materials | AISI 316L stainless steel |
| Duty Cycle | 120 min ON / 30 min OFF |
| Overload Protection | Yes |
| Weight | 9.7 kg |
| Dimensions (W×D×H) | 320 × 300 × 380 mm |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Ingress Protection Rating | IP22 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF10 Basic |
| Motor Input Power | 1000 W |
| Motor Output Power | 500 W |
| Speed Range | 3000–6500 rpm |
| Duty Cycle | 120 min ON / 30 min OFF |
| Cooling Options | Dry Ice (Yes), Water (No), Liquid Nitrogen (No) |
| Dimensions (W×D×H) | 320 × 380 × 300 mm |
| Weight | 9.7 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Rating | IP22 |
| Voltage | 230/115 V |
| Frequency | 50/60 Hz |