Constant Temp/Heating/Drying Equipment
Filter
Showing 1381–1410 of 3291 results
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | Oven 125 basic dry – glass |
| Temperature Range | RT + 5 °C to 250 °C |
| Temperature Uniformity | ±0.3 K |
| Chamber Dimensions (W×D×H) | 550 × 525 × 450 mm |
| External Dimensions (W×H×D) | 700 × 825 × 650 mm |
| Chamber Volume | 125 L |
| Chamber Material | Stainless Steel (AISI 304) |
| Heating Method | Natural Convection |
| Power Supply | 220–240 V / 115 V / 100 V, 50/60 Hz |
| Rated Power | 2450 W |
| USB Interface | Yes |
| IP Rating | IP20 |
| Max. Shelf Load | 30 kg per shelf |
| Max. Number of Shelves | 6 |
| Timer Range | 1–144,000 min |
| Display Resolution | 0.1 K |
| Standby Power Consumption | 2 W |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | Oven 125 basic dry |
| Instrument Type | Forced-Convection Drying Oven |
| Temperature Range | Ambient +5 °C to 250 °C |
| Temperature Uniformity | ±0.3 K |
| Chamber Dimensions (W×D×H) | 550 × 525 × 450 mm |
| Internal Volume | 125 L |
| Chamber Material | Stainless Steel (AISI 304) |
| External Dimensions (W×H×D) | 700 × 825 × 650 mm |
| Weight | 79 kg |
| Heating Power | 2400 W |
| Ventilation | Electronically Adjustable Air Damper |
| Timer Range | 1–144,000 min (24 h) |
| Max. Shelf Capacity | 6 shelves, 30 kg per shelf |
| Display | LED, 7-segment |
| Interface | USB-B for data logging |
| Safety | Independent Overtemperature Protection (DIN 12880 compliant) |
| Ingress Protection | IP20 |
| Power Supply | 220–240 V / 115 V / 100 V, 50/60 Hz |
| Standby Power Consumption | 2 W |
| Operating Environment | 5–40 °C, ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Forced-Convection Drying Oven |
| Model | Oven 125 control - dry |
| Temperature Range | Ambient +5 to 300 °C |
| Temperature Uniformity | ±0.3 K |
| Chamber Dimensions (W×D×H) | 550 × 525 × 450 mm |
| Internal Volume | 125 L |
| Exterior Dimensions (W×H×D) | 700 × 825 × 650 mm |
| Chamber Material | Stainless Steel (AISI 304) |
| Heating Method | Forced Air Convection (Fan-Assisted) |
| Power Input | 2500 W (220–240 V / 50–60 Hz) |
| Weight | 82 kg |
| Protection Class | IP20 (DIN EN 60529) |
| Safety Compliance | DIN 12880 TWB, EN 61010-1 |
| Interfaces | RS232, USB (for data logging to USB drive) |
| Max. Shelf Capacity | 6 shelves, 30 kg per shelf |
| Timer Range | 1–142,560 min (up to 99 days) |
| Display | Dual TFT screens with real-time parameter visualization |
| Safety Features | Independent overtemperature protection circuit (adjustable 50–320 °C), door-interlocked fan shutdown |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Forced-convection drying oven |
| Model | Oven 125 control – dry glass |
| Temperature Range | RT +5 to 300 °C |
| Temperature Uniformity | ±0.3 K |
| Interior Dimensions | 550 × 525 × 450 mm |
| Interior Volume | 125 L |
| Chamber Material | Stainless steel (AISI 304) |
| External Dimensions | 700 × 650 × 825 mm |
| Heating Power | 2400 W |
| Safety Circuit Range | 50–320 °C |
| Display | Dual TFT screens |
| Interface | RS232, USB port for data logging to USB stick |
| Shelf Capacity | Up to 6 adjustable shelves (30 kg per shelf) |
| Protection Class | IP20 |
| Power Supply | 220–240 V / 115 V / 100 V, 50/60 Hz |
| Standby Power | 2 W |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RC 2 Basic |
| Instrument Type | Constant-Temperature Bath Circulator |
| Circulation Mode | Internal Circulation Only |
| Temperature Control | Refrigeration & Heating |
| Bath Volume | 4 L |
| Temperature Range | –20 °C to +40 °C |
| Temperature Stability | ±0.1 K (@ –10 °C) |
| Cooling Power | 400 W |
| Pump Material | PEEK |
| Pump Speed | Continuously Adjustable |
| Fluid Inlet/Outlet | Integrated Funnel Fill Port & Drain Valve |
| Insulated Bath Design | Yes |
| Fan Access | Front Panel Removable for Maintenance |
| Recommended Minimum Fluid Volume for External Circulation | 2.5 L |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | RC 2 |
| Instrument Type | Constant-Temperature Bath Circulator |
| Circulation Mode | Internal Circulation |
| Temperature Control | Refrigeration & Heating |
| Bath Volume | 4 L |
| Temperature Range | −20 °C to +40 °C |
| Temperature Stability | ±0.1 K |
| Cooling Power | 400 W |
| Pump Material | PEEK |
| Pump Speed | Continuously Adjustable |
| External Temperature Sensing | PT100 Input Supported |
| Remote Control | Wireless (WiCo) |
| Programmable Stages | 10-step ramp/soak profiles |
| Bath Fill Volume for External Circulation | 2.5 L |
| Fan Access | Front Panel Removable for Maintenance |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Type | RC 2 green basic |
| Instrument Category | Cooling Circulator |
| Circulation Mode | Internal & External |
| Temperature Control | Refrigeration & Heating |
| Bath Volume | 4 L (adjustable from 1.5–4.0 L) |
| Temperature Range | −30 °C to +70 °C |
| Temperature Stability | ±0.15 K (DIN 12876, @ −10 °C) |
| Refrigerant | R290 (propane, eco-friendly) |
| Cooling Power | 800 W (@ 20 °C), 90 W (@ −30 °C) |
| Pump Type | Speed-controlled PEEK diaphragm pump |
| Max. Pressure | 0.5 bar |
| Max. Flow Rate | 21 L/min (at 0 bar backpressure) |
| Interface | RS232 & USB |
| Compliance | DIN 12876, DIN EN 60529 (IP21), CE, RoHS |
| Dimensions (W×D×H) | 220 × 475 × 525 mm |
| Weight | 25.5 kg |
| Ambient Operating Conditions | 5–32 °C, ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Type | RC 2 green control |
| Instrument Category | Circulating Chiller/Heater |
| Circulation Mode | Internal & External |
| Temperature Control | Refrigeration & Heating |
| Bath Volume | 4 L |
| Temperature Range | −30 °C to Room Temperature (up to 70 °C with optional heater module) |
| Temperature Stability | ±0.15 K (DIN 12876, @ −10 °C) |
| Refrigerant | R290 (propane, A3 class, low-GWP) |
| Cooling Power | 800 W (@ 20 °C), 90 W (@ −30 °C) |
| Pump | Speed-controlled PEEK diaphragm pump, max. pressure 0.5 bar, max. flow 21 L/min |
| Interface | RS232 & USB |
| Wireless Controller (WiCo) | 10 programmable protocols, up to 10 segments each |
| External PT100 Input | LEMO connector |
| Calibration | 3-point internal & external sensor calibration |
| Protection Rating | IP21 |
| Dimensions (W×D×H) | 220 × 475 × 525 mm |
| Weight | 26.5 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported |
| Model | RC 2 lite |
| Instrument Type | Circulating Chiller |
| Circulation Mode | Internal & External |
| Temperature Control | Refrigeration & Heating Capable |
| Bath Volume | 1–3.5 L |
| Temperature Range | –10 °C to Ambient (up to +70 °C with external heater) |
| Temperature Stability | ±0.5 K |
| Input Power | 250 W |
| Supply Voltage | 230 V AC, 50/60 Hz |
| Refrigerant | R290 (Propane), 70 g |
| Max. Cooling Capacity | 400 W @ 20 °C |
| Pump Flow Rate | 18 L/min @ 0 bar |
| Max. Pressure | 0.35 bar (pressure side), 0.15 bar (suction side) |
| Protection Rating | IP21 |
| Compliance | DIN 12876 Class I, DIN EN 60529, CE |
| Brand | INNOTEG |
|---|---|
| Model | TCS-2 |
| Type | Refrigerated/Heating Circulating Bath |
| Capacity | 10 L |
| Temperature Range | −20 °C to 100 °C |
| Temperature Stability | ±0.05 °C (at 25 °C, water or ethanol) |
| Display Resolution | 0.1 °C |
| Cooling Power | 0.47 kW @ 20 °C |
| Bath Opening Dimensions | 215 mm × 170 mm × 150 mm (W × D × H) |
| Circulation Mode | Internal & External |
| Control System | Microprocessor-based PID with Auto-tuning |
| Construction | 304 Stainless Steel Interior, Insulated Foam Housing |
| Safety Features | Dual-level Liquid Level Detection (Visual + Audible Alarm), Dry-run Protection, Independent Heating/Cooling Status Indicators, Programmable Heating Timer |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Model | TCS-3 |
| Instrument Type | Constant-Temperature Bath Chiller |
| Circulation Mode | External Circulation |
| Temperature Control | Refrigeration & Heating |
| Bath Volume | 5 L |
| Temperature Range | −20 °C to Ambient |
| Temperature Stability | ±0.3 K |
| Pump Type | Pressure/Suction Dual-Mode |
| Refrigeration Power | 0.45 kW @ 10 °C |
| Dimensions (W×D×H) | 222 × 480 × 495 mm |
| Weight | 25 kg |
| Temperature Sensor | PT100 |
| Display | High-Brightness LED |
| Safety Features | Over-Temp, Low-Level, Dry-Run, and Over-Pressure Protection |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model | HCS410 |
| Temperature Range | –60 °C to 400 °C |
| Temp. Resolution | 0.01 °C |
| Temp. Stability | ±0.02 °C at 100 °C |
| Max. Heating Rate | +50 °C/min |
| Max. Cooling Rate | –50 °C/min |
| Control Method | Switching PID (LVDC PID optional) |
| Sensor | 100 Ω Platinum RTD |
| Sample Area | 38 mm × 50 mm |
| Chamber Height | 2.0 mm / 6.0 mm (w/ spacers) |
| Viewing Aperture | 5 mm |
| Working Distance | 6.5 mm |
| Condenser Distance | 13 mm |
| X-Y Micropositioner (optional) | 10 µm resolution |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model | HCS602 |
| Temperature Range | –190 °C to +600 °C (optional up to +700 °C) |
| Temperature Stability | ±0.1 °C at 100 °C |
| Minimum Temperature Resolution | 0.01 °C |
| Max Heating Rate | +200 °C/min at 100 °C |
| Max Cooling Rate | –130 °C/min at 100 °C (with LN2-P4 accessory) |
| Sample Area | 35 mm × 35 mm |
| Standard Optical Window | 20 mm × 20 mm |
| Optional Large Optical Window | 38 mm × 38 mm |
| Minimum Working Distance | Objective ≥ 5.3 mm, Condenser ≥ 10.0 mm |
| Controller | STC200 standalone unit with RS232 interface and Windows software |
| Software Support | LabVIEW drivers (IEEE-488 & RS232) included |
| Compliance | Designed for ASTM E2267, ISO 11357, and USP <1031> thermal microscopy applications |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model | HCS622G |
| Temperature Range | −190 °C to +600 °C (optional up to +700 °C) |
| Temperature Resolution | 0.1 °C |
| Temperature Stability | ±0.01 °C at 100 °C |
| Max. Heating Rate | 230 °C/min at 200 °C |
| Max. Cooling Rate | −130 °C/min at 200 °C |
| Min. Ramp Rate | ±0.1 °C/hour |
| Control Method | Switching PID (LVDC PID optional) |
| Sensor | 100 Ω Platinum RTD |
| Working Distance | 5.8 mm |
| Condenser Distance | 12.7 mm |
| Sample Area | 38 mm × 38 mm |
| Chamber Height | 0.76 mm (with inner cover) |
| Viewing Aperture | 26.5 mm (reflected light), 2.0 mm (transmitted light) |
| Vacuum Port | 1/8″ NPT female |
| Gauge Port | 1/8″ NPT female |
| Brand | Instec |
|---|---|
| Origin | USA |
| Model | TSA02i |
| Temperature Range | –25°C to +60°C (optional extended range available) |
| Temperature Resolution | ±0.01°C at 37°C |
| Temperature Stability | ±0.1°C/hour |
| Max Heating Rate | +50°C/min at 37°C |
| Max Cooling Rate | –50°C/min at 37°C |
| Sample Area | 53 mm × 78 mm |
| Viewing Aperture | 17 mm (with sample plate), 40 mm (without sample plate) |
| Working Distance | 1.3 mm (standard), 2.8 mm (with sample plate), 14.6 mm (inner cover only) |
| Chamber Height | 12.8 mm (inner cover), 32 mm (outer cover) |
| Condenser Clearance | 35 mm (with outer cover), 14.6 mm (inner cover only) |
| Brand | Zhongke Aobo |
|---|---|
| Origin | Beijing, China |
| Model | HJ-6 |
| Heating Element Surface Temperature | 380 °C |
| Voltage | 220 V ±10%, 50 Hz |
| Speed Range | 0–1200 rpm |
| Insulation Material | High-Temperature Alkali-Free Fiber |
| Heating Element | Sealed Ni-Cr Resistance Wire |
| Enclosure | Seamless Drawn Metal Shell with Epoxy Powder Coating |
| Control Type | Solid-State Electronic Temperature & Speed Regulation |
| Compliance | Designed for General Laboratory Use under IEC 61010-1 Safety Standards |
| Brand | inTEST Temptronic |
|---|---|
| Origin | USA |
| Model | ATS-515 |
| Temperature Range | -45°C to +225°C |
| Temperature Stability | ±0.1°C (at setpoint) |
| Ramp Rate | -40°C to +125°C in <12 s |
| Temperature Accuracy | ±1.0°C (NIST-traceable calibration) |
| DUT Sensor Interface | T-type and K-type thermocouple inputs |
| Airflow Control | 0.5–3 SCFM (0.25–1.5 L/s) dry air purge |
| Power Supply | 200 VAC ±10%, 50 Hz, 16 A |
| Operating Ambient | 20–28°C, 0–60% RH (45% nominal) |
| Controller Dimensions (W×H×D) | 26.7 × 20.7 × 9.8 cm |
| Chiller Dimensions (W×H×D) | 51.3 × 41.4 × 74.9 cm |
| Hot Air Nozzle Diameter | 13.97 cm |
| Weight | System 112 kg |
| Compliance | CE-marked, CFC-free refrigerant (R-513A or equivalent), RoHS-compliant |
| Communication Interfaces | IEEE-488 (GPIB), RS-232, LabVIEW™ driver included |
| Control Mode | Local knob-based interface + remote programmable operation |
| Safety Features | Auto-diagnostic system, user-defined thermal limits, dual-mode sensing (Air Mode / DUT Mode) |
| Brand | IRM |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | FDE115 |
| Instrument Type | Precision Forced-Air Oven |
| Temperature Range (Drying Mode) | Ambient + 5 °C to 300 °C |
| Temperature Range (Incubation Mode) | Ambient + 20 °C to 80 °C |
| Temperature Fluctuation | ≤ ±0.2 °C |
| Temperature Uniformity | ±2% |
| External Dimensions (W×D×H) | 665 mm × 750 mm × 800 mm |
| Internal Chamber Dimensions (W×D×H) | 500 mm × 455 mm × 505 mm |
| Temperature Resolution | 0.1 °C |
| Chamber Material | Stainless Steel (SUS304) |
| Heating Method | Forced-Air Circulation with Adjustable Fan Speed |
| Control System | Touch-Sensitive LCD Interface with PID Algorithm |
| Brand | IRM |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Direct Producer |
| Equipment Category | Domestic |
| Model | FDH115 / FDH345 |
| Temperature Range | Ambient +20 °C to 450 °C |
| Temperature Stability | ≤ ±0.2 °C |
| Internal Dimensions (W×D×H) | 500×455×505 mm (FDH115) / 700×705×700 mm (FDH345) |
| External Dimensions (W×D×H) | 815×920×950 mm (FDH115) / 1280×1215×1510 mm (FDH345) |
| Chamber Material | Stainless Steel (AISI 304) |
| Heating Method | Forced Convection with Axial Fan Circulation |
| Temperature Sensor | J-Type Thermocouple |
| Control System | Microprocessor-Based PID Controller with Independent Over-Temperature Cut-Off |
| Uniformity at 200 °C | ≤ ±2.5 °C |
| Standard Shelving | 2 shelves (FDH115), 2 shelves (FDH345) |
| Shelf Load Capacity | 30 kg per shelf / 60 kg total (FDH115), 30 kg per shelf / 120 kg total (FDH345) |
| Air Exchange Rate | 11–125 m³/h (adjustable via calibrated exhaust valve) |
| Optional Features | Observation Window (200×200 mm or 350×350 mm), Dust Filter Kit, Auxiliary Exhaust Unit |
| Power Supply | AC 220 V / 4.1 kW (FDH115), AC 380 V / 12 kW (FDH345) |
| Brand | IRM |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | FDHN115 / FDHN345 |
| Temperature Range | Ambient +20 °C to 450 °C |
| Temperature Uniformity (at 200 °C) | ≤2.5 °C |
| Temperature Fluctuation | ≤±0.2 °C |
| Internal Dimensions (W×D×H, mm) | 500×455×505 / 700×705×700 |
| External Dimensions (W×D×H, mm) | 815×920×950 / 1280×1215×1510 |
| Chamber Volume | 115 L / 345 L |
| Interior Material | Stainless Steel (SUS304) |
| Heating Method | Forced-air Circulation with Adjustable Fan Speed |
| Air Exchange Rate | 11 m³/h / 25 m³/h |
| Standard Features | N₂ Inlet Port with Flowmeter, LCD Touchscreen Controller, 100 Programs × 16 Segments, Delayed/Time-Scheduled Operation, Independent Over-Temperature Protection, Power-Fail Recovery, USB Data Export, RS485 Interface, Door Interlock Switch, Password-Protected Access |
| Optional | Printer, Chart Recorder, Observation Window (200×200 mm / 350×350 mm) |
| Shelf Capacity | 2–3 (FDHN115) / 2–4 (FDHN345), Max Load per Shelf: 30 kg / 60 kg (FDHN115) or 120 kg (FDHN345) |
| Power Supply | AC 220 V / 4.1 kW (FDHN115) or AC 380 V / 12 kW (FDHN345) |
| Brand | IRM |
|---|---|
| Origin | Beijing, China |
| Manufacturer | IRM (Domestic) |
| Instrument Type | Box-Type Muffle Furnace |
| Max Operating Temperature | 1200 °C / 1500 °C / 1700 °C (model-dependent) |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 3 kW |
| Heating Time to Max Temp | ≤20 min |
| Heating Element | Kanthal A1 resistance wire (FE series) or MoSi₂ heating rods (FK series) |
| Internal Chamber Dimensions | 200 × 300 × 202 mm |
| Nominal Volume | 12 L |
| Controller | 7-inch color LCD touchscreen with intelligent PID algorithm |
| Programmable Ramp/Soak | 30 segments per program, 15 programs stored |
| Safety Protections | Over-temperature cutoff, over-current & over-voltage protection, thermocouple failure detection, earth leakage circuit breaker |
| Brand | IRM |
|---|---|
| Model | FW320 |
| Type | Precision Drying Oven |
| Temperature Range | Ambient +10 °C to 60 °C |
| Internal Dimensions (W×D×H) | 900 mm × 600 mm × 600 mm |
| External Dimensions (W×D×H) | 950 mm × 710 mm × 880 mm |
| Chamber Volume | 320 L |
| Heating Method | Forced-air Circulation |
| Standard Shelving | 2 shelves (up to 6 installable) |
| Shelf Size | 892 mm × 596 mm |
| Shelf Load Capacity | 30 kg per shelf / 60 kg total |
| Airflow Rate | 260 m³/h |
| Power Supply | AC 220 V, 2 kW |
| Net Weight | 47 kg |
| Brand | IRM |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | L08 |
| Temperature Range | 200–500 °C |
| Temperature Uniformity | ±0.2 °C |
| Chamber Material | Stainless Steel (304 or 316 optional) |
| Heating Method | Forced-Air Convection |
| External Dimensions | Customizable |
| Internal Chamber Volume | 1–15 m³ (custom) |
| Instrument Type | High-Temperature Industrial Drying Oven |
| Brand | IRM |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | ND115 |
| Temperature Range | Ambient +5°C to 220°C |
| Temperature Fluctuation | ±1.0°C |
| External Dimensions | 660 × 750 × 810 mm |
| Internal Dimensions | 500 × 450 × 510 mm |
| Temperature Resolution | 0.1°C |
| Control System | PID-based microprocessor controller with self-tuning capability |
| Timer Range | 0–9999 minutes or 0–9999 hours |
| Safety Features | Independent overtemperature protector, door interlock switch, residual-current circuit breaker (RCCB), overcurrent/overvoltage protection, triple overtemperature protection (heating cutoff at set deviation limit, alarm-triggered cutoff, hardware-independent backup cutoff) |
| Optional Accessory | Temperature data logger |
| Brand | IRM |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | NFB100 |
| Instrument Type | Benchtop Box Furnace |
| Maximum Temperature | 1200 °C |
| Temperature Control Accuracy | ±0.5 °C (≤800 °C), ±1 °C (>800 °C) |
| Rated Power | 1200 W |
| Heating Rate to Max Temp | 20 min |
| Heating Element | Premium Imported Resistance Wire |
| Internal Chamber Dimensions | 100 × 130 × 105 mm |
| Control System | PID-Based Intelligent Microprocessor Controller |
| Nominal Chamber Volume | 1.4 L |
| Safety Features | Dual Independent Overtemperature Protection, Door-Interlocked Power Cut-off, Leakage Circuit Breaker, Thermal Overload & Thermocouple Fault Detection |
| Programmable Capability | Up to 40 segments per program (1–4 programs configurable), up to 9999 cycles, adjustable ramp/soak profiles |
| Optional Accessories | USB Data Logger, External Temperature Recorder, RS485 Communication Module |
| Brand | IRM |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | NFD115 |
| Instrument Type | Precision Drying Oven |
| Temperature Range | Ambient +5 °C to 220 °C |
| Temperature Fluctuation | ≤ ±0.2 °C |
| External Dimensions (W×D×H) | 660 × 750 × 810 mm |
| Internal Dimensions (W×D×H) | 500 × 450 × 510 mm |
| Temperature Resolution | 0.1 °C |
| Chamber Material | Stainless Steel |
| Heating Method | Forced-Air Circulation |
| Temperature Uniformity | ±2% |
| Timer Range | 0–9999 minutes or 0–9999 hours |
| PID Control Zones | Three independent zones (low/medium/high temperature) with auto-tuning capability |
| Safety Features | Leakage current circuit breaker, independent over-temperature protector, door interlock switch |
| Optional Accessories | Observation window, temperature data logger, USB data export module |
| Brand | IRM |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | TE200 |
| Instrument Type | Tube Furnace |
| Maximum Temperature | 1200 °C / 1500 °C / 1700 °C (configurable by heating element & thermocouple) |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 3 kW |
| Heating Time to Max Temp | 24 min |
| Heating Elements | High-quality resistance wire (1200 °C), imported SiC rods (1500 °C), or MoSi₂ rods (1700 °C) |
| Internal Chamber Dimensions | Ø50 mm × 600 mm |
| Control System | PID-based intelligent microprocessor controller |
| Tube Diameter | 60 mm |
| Display | 7-inch color LCD touchscreen |
| Programmable Profiles | 15 stored ramp-soak programs |
| Ramp Rate | Up to 20 °C/min |
| Uniformity Zone Length | 250 mm |
| Tube Material | High-purity quartz (standard) or alumina (optional) |
| Insulation | High-density ceramic fiber |
| Safety Protections | Over-temperature cutoff, over-current/over-voltage protection, thermocouple failure detection, earth leakage circuit breaker |
| Thermocouple Types | K-type (≤1200 °C), S-type (≤1500 °C), B-type (≤1700 °C) |
| Brand | IRM |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | VD50 |
| Instrument Type | Vacuum Oven |
| Temperature Range | Ambient + 20 °C to 200 °C (300 °C optional) |
| Temperature Fluctuation | ≤ ±0.2 °C |
| External Dimensions (W×D×H) | 410 × 530 × 515 mm |
| Internal Dimensions (W×D×H) | 255 × 325 × 255 mm |
| Temperature Resolution | 0.1 °C |
| Chamber Material | SUS304 Stainless Steel |
| Heating Method | External Wall Heating |
| Ultimate Vacuum | 133 Pa |
| Control System | Precision PID Microprocessor Controller |
| Timer Range | 0–99 h 59 min |
| Ramp Rate | 0.1–20 °C/min |
| Standard Shelf | 1 (max 3), Load Capacity: 30 kg per shelf (60 kg total) |
| Power Consumption (at 200 °C) | 800 W |
| Input Voltage | AC 220 V |
| Brand | ISOTECH |
|---|---|
| Origin | United Kingdom |
| Model Numbers | 785LA / 785MA / 785HA / 796LA / 796MA / 796HA / 813TPA / 820SRA |
| Temperature Range | −120 °C to +300 °C (model-dependent) |
| Stability | ±0.002 °C to ±0.015 °C |
| Uniformity | ≤0.002 °C to ≤0.015 °C |
| Calibration Volume | 15.0 L to 30.6 L (300 × 300 × 340 mm) |
| Noise Level | 48–62 dB(A) |
| Power Supply | 220 VAC, 50/60 Hz |
| Heating Power | 1.5–3.5 kW |
| Cooling Time (to min temp) | 30–240 min |
| Heating Time (to max temp) | 30–90 min |
| Interface | RS-232, USB |
| Display | Full-color programmable touchscreen |
| Brand | ISOTECH |
|---|---|
| Origin | United Kingdom |
| Model | 820 |
| Temperature Range | 30 °C to 200 °C |
| Temperature Stability | ±0.01 °C |
| Tank Capacity | 36 L |
| Circulation Method | Propeller-driven forced convection |
| Fluid Compatibility | Water, silicone oil, and other low-volatility heat-transfer fluids |
| Compliance | Designed for ISO/IEC 17025-compliant calibration laboratories |