High Temperature Aging Test Chamber
Filter
Showing 91–120 of 181 results
| Brand | LabCompanion |
|---|---|
| Model | HH-72 |
| Type | Forced-Convection Benchtop Environmental Test Chamber |
| Temperature Range | RT+10°C to 300°C |
| Temperature Uniformity | ±2.5°C |
| Temperature Fluctuation | ±0.1°C (at 100°C), ±0.3°C (at 200°C) |
| Control Accuracy | ±0.5°C |
| Internal Volume | 72 L |
| Internal Dimensions (W×D×H) | 450 × 400 × 400 mm |
| External Dimensions (W×D×H) | 905 × 610 × 575 mm |
| Heating Power | 1.5 kW |
| Supply Voltage | AC 220 V, 50 Hz |
| Temperature Sensor | Industrial PT100 Platinum Resistance Thermometer |
| Control System | Microprocessor-Based PID Controller with LED Digital Display (Set/Actual Temperature) |
| Timer Range | 0–999 min |
| Operating Mode | Constant-Temperature Mode Only |
| Construction | Interior – SUS430 Stainless Steel (≥1.2 mm) |
| Air Circulation | Forced Convection via Rear-Mounted Horizontal Fan |
| Ventilation Ports | Adjustable Inlet/Exhaust Apertures for Controlled Atmosphere Exchange |
| Safety Features | Over-Temperature Protection, Ground Fault Circuit Interruption, Dual-Stage Thermal Cut-Out |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HH-72 |
| Voltage | 3φ 380 VAC ±10% or 2φ 220 VAC ±10% |
| Temperature Range | RT+5°C to 300°C |
| Temperature Stability | ±1°C |
| Temperature Uniformity | ±1.5°C |
| Internal Dimensions (W×H×D) | 450×400×400 mm |
| External Dimensions | 610×905×575 mm |
| Construction | Exterior – Powder-Coated Steel |
| Insulation | High-Efficiency Compressed Glass Wool |
| Air Circulation | Forced Convection with Optimized Outlet Design |
| Safety Protection | Dual-Stage Over-Temperature Cut-Off (Alarm + Power Disconnection), MCCB Overload Protection, Ceramic Fuse, Non-Fuse Switch, Auto-Tuning PID Control, Finned Tubular Heaters |
| Accessories | Adjustable Stainless Steel Shelves (2–6 pcs), Delayed Fan Shutdown Function (Optional Programmable Controller Available) |
| Brand | LabCompanion |
|---|---|
| Model | HH-72 |
| Type | Forced-Convection Environmental Test Chamber |
| Internal Volume | 72 L |
| Interior Dimensions (W×D×H) | 450 × 400 × 400 mm |
| Exterior Dimensions (W×D×H) | 905 × 610 × 575 mm |
| Temperature Range | RT + 10°C to 300°C |
| Temperature Uniformity | ±2.5°C |
| Temperature Fluctuation | ±0.1°C at 100°C, ±0.3°C at 200°C |
| Heating Rate | ≤40 min (RT to 100°C) |
| Control System | Microprocessor-based PID Controller with PT100 Sensor |
| Display | Dual LED (Set & Actual Temperature) |
| Timer Range | 0–999 min |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Construction | Stainless Steel (SUS430) Interior, SECC Cold-Rolled Steel Exterior with Powder Coating |
| Insulation | High-Density Glass Wool + Rock Wool |
| Door Seal | Environmentally Compliant Silicone Rubber Gasket |
| Heating Element | Nickel-Chromium Alloy Sheathed Heater |
| Air Circulation | Forced Convection via Horizontal Centrifugal Fan |
| Ventilation | Adjustable Inlet/Exhaust Ports |
| Safety Features | Over-Temperature Protection, Ground Fault Circuit Interrupter (GFCI), Independent Safety Thermostat |
| Brand | LabCompanion |
|---|---|
| Model | HH-Series 3 |
| Type | Forced-Air Circulating Drying Oven |
| Temperature Range | RT+10°C to 250°C |
| Temperature Resolution | ±0.1°C |
| Temperature Uniformity | ±0.5°C |
| Timer Range | 1–9999 min |
| Interior Dimensions (W×D×H) | 450×550×550 mm |
| Exterior Dimensions (W×D×H) | 600×710×845 mm |
| Shelving | 2 adjustable stainless steel trays |
| Power Supply | 220 V, 50 Hz, 1500 W |
| Construction | Interior – mirror-finish SUS430 stainless steel (≥1.2 mm) |
| Air Circulation | Low-noise high-temp axial fan + fully enclosed recirculating duct system |
| Compliance | Designed per IPC-TM-650 test methodology requirements |
| Interface | RS485 port for data logging and PC connectivity |
| Operating Ambient | +5°C to +40°C |
| Heating Efficiency | 35–45% (up to 50% peak) |
| Ramp Time | ~15 min (RT to 100°C) |
| Brand | LabCompanion |
|---|---|
| Model | HH-Series 1 |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (Guangdong) Co., Ltd. |
| Temperature Range | RT+10°C to 250°C |
| Temperature Resolution | ±0.1°C |
| Temperature Uniformity | ±0.5°C |
| Timer Range | 1–9999 min |
| Interior Dimensions (W×D×H) | 450 × 550 × 550 mm |
| Exterior Dimensions (W×D×H) | 600 × 710 × 845 mm |
| Standard Shelving | 2 adjustable stainless steel trays |
| Power Supply | 220 V AC, 50 Hz, 1500 W |
| Construction | Interior – mirror-finish SUS304 stainless steel (argon arc welded) |
| Heating System | Forced-air convection with high-temperature-resistant axial fan |
| Control System | Microprocessor-based digital temperature controller with RS485 interface for data logging and PC connectivity |
| Compliance | Designed per IPC-TM-650 test methodology requirements for thermal aging evaluation |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HH15 |
| Pricing | Available Upon Request |
| Temperature Range | Ambient to 260 °C |
| Control Accuracy | ±0.5 °C |
| Heating Ramp Time | ~15 min (Ambient to 100 °C) |
| Insulation Material | Imported Rock Wool |
| Interior Material | SUS430 Stainless Steel (≥1.2 mm thickness) |
| Exterior Material | SECC Cold-Rolled Steel with Powder Coating (≥1.5 mm thickness) |
| Heating Element | Honeycomb-Type Resistive Heater |
| Controller | PID Microprocessor-Based with Dual PV/SV Digital Display |
| Temperature Sensor Input | Type K (Chromel-Alumel) Thermocouple |
| Output Driver | Solid-State Relay (SSR) |
| Safety Protection | Independent Over-Temperature Cut-Off |
| Viewing Window | Dual-Layer Tempered Glass |
| Air Circulation | Forced Horizontal Airflow with Adjustable Baffle Plates |
| Circulation Motor | High-Temperature Rated Long-Shaft Motor (1 HP) |
| Fan Type | Multi-Blade Turbine Impeller |
| Timer Function | 99.9 s to 999 h |
| Brand | LabCompanion |
|---|---|
| Model | LH Series |
| Type | High-Temperature Aging Test Chamber |
| Standards Compliance | ASTM D2436, ASTM E145, JIS K630, JIS K7212, CNS 3556, JTTC SPEC-151 |
| Internal Dimensions (L×W×H) | LH-72: 40×40×45 cm |
| LH-150 | 50×50×55 cm |
| Temperature Range | Ambient to 200°C (optional to 300°C) |
| Heating Power | LH-72: 1.8 kW |
| LH-150 | 3.2 kW |
| Rotational Speed | 8–10 rpm |
| Motor Rating | LH-72: 1/4 HP |
| LH-150 | 1/2 HP |
| Air Circulation | Forced convection with axial fan and baffle-guided hot-air flow |
| Weight | LH-72: 80 kg |
| LH-150 | 120 kg |
| External Dimensions (L×W×H) | LH-72: 84×54×100 cm |
| LH-150 | 95×65×113 cm |
| Construction | Double-wall insulated chamber with stainless steel interior (SUS304), aluminized steel exterior, silicone door gasket, over-temperature protection, PID temperature controller with digital display |
| Brand | LabCompanion |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | LP |
| Capacity Options (L) | 80, 120, 150, 225, 408, 800, 1000 |
| Temperature Ranges | H (0 to +150°C), R (−20 to +150°C), L (−40 to +150°C), U (−60 to +150°C), S (−70 to +150°C) |
| Humidity Range | 20–98% RH |
| Temp. Uniformity | ±0.5°C |
| Humidity Uniformity | ±1.0% RH |
| Heating Rate | −20→+150°C ≤60 min |
| Cooling Rate | +20→−70°C ≤80 min |
| Control System | Q8 Touchscreen Controller |
| Refrigeration | Hermetic Twin-Screw Compressor (Tecumseh/Tecumseh-compatible or equivalent, R404A/R507 alternative refrigerant) |
| Construction | Interior – Mirror-Finish SUS304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Compliance | GB/T 10586, GB/T 10592, GB/T 2423.1/3/4/34, IEC 60068-2-1/-2/-14, MIL-STD-810D, GJB 150.9 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OVEN-100-4C |
| Temperature Range | RT to 200 °C |
| Temperature Uniformity | ≤2 °C |
| Temperature Fluctuation | ≤±0.5 °C |
| Temperature Deviation | ≤±2.0 °C |
| Heating Rate | 3.5 °C/min (average, no-load, from ambient +20 °C to 200 °C) |
| Internal Dimensions (W×H×D) | 500×500×400 mm |
| Chamber Volume | 100 L per zone |
| Total Zones | 4 independent temperature-controlled chambers |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | OVEN-216 |
| Price Range | USD 1,400 – 3,150 |
| Max Operating Temperature | 200–300 °C |
| Product Type | Hot Air Aging Test Chamber |
| Category | Aging Chamber |
| Temperature Range | Ambient +10 °C to 300 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from ambient +20 °C to 200 °C, no-load) |
| Cooling Rate | 0.7–1.0 °C/min (natural convection cooling) |
| Interior Dimensions (W×H×D) | 600 × 600 × 600 mm |
| Power Supply | 220 V AC, 50/60 Hz |
| Total Power | 3.8 kW |
| Net Weight | 180 kg |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OVEN-91 |
| Price Range | USD 1,400–7,000 (FOB) |
| Max Operating Temperature | 150–200 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | (Ambient +20) °C → 200 °C in ≤40 min (standard configuration), ≤60 min (with optional insulation or larger volume) |
| Cooling Rate | 0.7–1.0 °C/min |
| Internal Construction | AISI 304 stainless steel welded chamber |
| External Casing | Powder-coated carbon steel |
| Viewing Window | Double-layer tempered glass |
| Air Circulation | High-temperature-rated centrifugal blower with optimized duct design |
| Control Resolution | 0.1 °C |
| Timer Range | 1–9999 minutes |
| Ambient Operating Conditions | 5–35 °C, ≤85% RH |
| Compliance | Designed to support ASTM D573, ISO 188, IEC 60068-2-1, and GB/T 3512 test protocols |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OVEN-C |
| Temperature Range | +50°C to +200°C |
| Max Operating Temperature | 150°C–200°C (configurable up to 300°C on request) |
| Temperature Uniformity | ±2.0°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Deviation | ±2.0°C |
| Heating Rate | ≤40 min (from ambient +20°C to 200°C) / ≤60 min (from ambient +20°C to 200°C, depending on chamber volume and insulation configuration) |
| Cooling Rate | 0.7–1.0°C/min |
| Construction Material | SUS304 Stainless Steel Interior |
| Insulation | High-Density Ceramic Fiber Blanket |
| Door Seal | High-Temperature Silicone Rubber Gasket |
| Safety Features | Heater/fan interlock, independent overtemperature protection, motor overcurrent/overheat protection, heater short-circuit protection |
| Control Mode | PID-based temperature controller with optional programmable ramp-soak profiles |
| Airflow Options | Horizontal or vertical forced convection (user-selectable) |
| Compliance | JB/T 5520–1991, GB/T 2423.2–2008, GJB 150.3A–2009 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | P-Series |
| Temperature Range | –20 °C to +150 °C (standard) |
| Humidity Range | 20–98 %RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±2 %RH (≥75 %RH) |
| Heating Rate | –20 °C → +100 °C in ~80 min |
| Cooling Rate | +20 °C → –20 °C in ~50 min |
| Internal Dimensions (W×H×D mm) | 500×600×500 (150L), 500×750×600 (225L), 600×850×800 (408L), 1000×1000×800 (800L) |
| Refrigeration System | Hermetic or Semi-Hermetic Compressor (Tecumseh/France or Copeland/Germany) |
| Controller | Q8-901 Color Touchscreen PLC-Based Programmable Controller (Bilingual English/Chinese UI) |
| Compliance | GB/T 2423.1–4, GB 10586/10592, IEC 60068-2-1/2/3, MIL-STD-810F (501.4, 502.4, 507.4), JIS C60068-2-1/2/3, JESD22-A101-B/A103-C/A119, GJB 150.9 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SH-1 |
| Pricing | Upon Request |
| Temperature Range | −20 °C to +150 °C (standard), −40 °C to +150 °C (low-temp variant), −70 °C to +150 °C (ultra-low-temp variant) |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Range | 30–98 %RH |
| Humidity Uniformity | ±2 %RH (±3 %RH above 75 %RH) |
| Programmable Capacity | 120 programs × 1200 segments, up to 999 cycles, max segment duration: 99 h 59 min |
| Control System | Q8-900 bilingual (English/Chinese) LCD touchscreen controller with PID tuning (9 groups), RS232 standard / RS485 optional |
| Cooling Method | Air-cooled or water-cooled (model-dependent) |
| Refrigeration Unit | French Tecumseh hermetic or German Copeland semi-hermetic compressor |
| Interior Material | SUS304 stainless steel |
| Insulation | High-density polyurethane foam or ultra-fine glass fiber |
| Compliance | GB/T 2423.1–2423.4, GB 10586, GB 10592, IEC 60068-2-1/2/3, MIL-STD-810F (501.4, 502.4, 507.4), JIS C60068-2-1/2/3, JESD22-A101-B/A103-C/A119, GJB 150.9 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | PSL-800 |
| Price | USD 1,400 (approx.) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2 °C |
| Heating Rate (20 °C to +150 °C, non-linear, no-load) | ~3.5 °C/min |
| Internal Dimensions (W×H×D) | 1000×1000×800 mm |
| External Dimensions (W×H×D) | 1480×2050×1240 mm |
| Net Weight | 650 kg |
| Power Supply | AC 380 V / 31.0 A |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | PU-408 |
| Price | USD 2,800 (approx.) |
| Temperature Range | -40 °C to +150 °C |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2 °C |
| Heating Rate (non-linear, no-load) | ~3.5 °C/min (20 °C to +150 °C) |
| Internal Dimensions (W×H×D) | 600 mm × 850 mm × 800 mm |
| External Dimensions (W×H×D) | 1080 mm × 1900 mm × 1230 mm |
| Net Weight | 305 kg |
| Power Supply | AC 380 V / 12.0 A |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | PVH-216 |
| Price | Upon Request |
| Max Operating Temperature | 200–300 °C |
| Product Type | Forced-Air Thermal Aging Chamber |
| Classification | Benchtop Aging Chamber |
| Temperature Range | 200–300 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | (Ambient + 20) °C → 200 °C in ≤40 min |
| Cooling Rate | 1.2 °C/min |
| Internal Chamber Dimensions (W×H×D) | 450 × 450 × 450 mm |
| Brand | LabCompanion |
|---|---|
| Model | SA-45 / SA-60 |
| Temperature Range | RT to +200°C (SA-45) / RT to +300°C (SA-60) |
| Uniformity | ±0.5°C |
| Control Accuracy | ±0.3°C |
| Air Exchange Rate | 1–200 times/hour (selectable) |
| Turntable Speed | 8–10 rpm |
| Internal Dimensions (W×H×D) | 450×450×450 mm (SA-45) / 600×600×600 mm (SA-60) |
| Power Supply | 220 V, single-phase, 5 kW (SA-45) / 7 kW (SA-60) |
| Compliance Standards | ASTM D2436, D573 |
| Brand | LabCompanion |
|---|---|
| Model | T-Series |
| Temperature Range | –70 °C to +150 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Programmable Profiles | 4 curves, up to 1000 segments |
| PID Tuning | 6 independent sets |
| Communication Interfaces | RS-232, RS-485 |
| Cooling Options | Air-cooled or water-cooled |
| Refrigeration System | Tecumseh (France) hermetic or Copeland (Germany) semi-hermetic compressors |
| Interior Material | SUS304 stainless steel |
| Insulation | Polyurethane foam or fiberglass |
| Standard Ports | One φ50 mm test port with cover, two adjustable shelves, four shelf supports, fluorescent interior lighting |
| Brand | LabCompanion (Hongzhan Technology) |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Type | UV Thermal Aging Test Chamber |
| Internal Volume | 34 L |
| Temperature Range | UV Irradiation Zone: +50 °C to +75 °C |
| Condensation Zone | +40 °C to +60 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | 1.0–3.0 °C/min |
| Compliance | CE-certified |
| Refrigerant | R404A / R23 (Montreal Protocol-compliant) |
| Control System | C100 PID + Fuzzy Logic Controller with Ethernet-enabled IoT expansion option |
| Safety Protections | Comprehensive multi-layer hardware and software safeguards including compressor high-pressure/overcurrent/overheat protection, phase sequence monitoring, leakage current interruption, independent chamber over-temperature/under-temperature cutoff, humidifier dry-run prevention, and water tank level sensing |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Model | VAC |
| Price Range | USD 1,150 – 2,900 |
| Max Operating Temperature | 150–200 °C |
| Temperature Range | Ambient +20 °C to 200 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±1 °C |
| Temperature Deviation | ±2 °C |
| Heating Rate | 3 °C/min |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZA-3 |
| Pricing | Available Upon Request |
| Construction | Interior & Exterior Chambers in SUS#304 Stainless Steel |
| Temperature Control | PID + PWM + SSR System with Dual Over-Temperature Protection |
| Temperature Resolution | 0.1 °C (T-type Thermocouple Sensor) |
| Chamber Dimensions (W×D×H) | 50 × 17 × 40 cm |
| External Dimensions (W×D×H) | 75 × 57 × 50 cm |
| Test Tray Configuration | Triple-Slot Design (Each Slot: 10 × 38 × 10 cm) |
| Safety Features | Low-Water Level Indicator, Steam Venting Port |
| Optional Accessories | Programmable Power-On Scheduler, RO-Purified Water Auto-Fill System |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZA-3 |
| Pricing | Available Upon Request |
| Construction | Interior & Exterior Chambers in SUS#304 Stainless Steel |
| Temperature Control System | PID + PWM + SSR with Dual Over-Temperature Protection |
| Temperature Sensor | T-type Thermocouple |
| Temperature Resolution | 0.1 °C |
| Display | LED Digital Interface |
| Chamber Internal Dimensions | 50 × 17 × 40 cm (W×D×H) |
| External Dimensions | 75 × 57 × 50 cm (W×D×H) |
| Test Tray Configuration | Triple-compartment, each 10 × 38 × 10 cm (W×D×H) |
| Safety Features | Low-Water Level Indicator, Steam Venting Port |
| Optional Accessories | Programmable Power-On Scheduler, RO-Purified Water Auto-Fill System |
| Brand | Labonce |
|---|---|
| Model | Labonce-250GW |
| Temperature Range | RT+15 °C to 200 °C |
| Internal Volume | 250 L |
| Internal Dimensions (W×D×H) | 600×600×700 mm |
| External Dimensions (W×D×H) | 1250×850×1000 mm |
| Power Consumption | 2.5 kW |
| Standard Shelving | 2 adjustable stainless steel shelves |
| Temperature Uniformity | ≤ ±2.0 °C (at ≤200 °C) |
| Temperature Stability | ≤ ±0.5 °C (at ≤200 °C) |
| Compliance | GB/T 11158–2008 |
| Control System | Imported digital display controller (GW) or programmable color touchscreen controller with audit trail & three-tier user permissions (GW-T) |
| Construction | Exterior – powder-coated steel |
| Safety | Independent over-temperature protection circuit |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | LH-010, LH-225 |
| Temperature Range | RT+10°C to 200°C |
| Temperature Uniformity | ≤ ±1.5°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Heating Rate | ~50 min (20°C → 200°C) |
| Air Exchange Rate | 10–300 cycles/hour (adjustable) |
| Sample Rack Rotation Speed | 10–12 rpm |
| Compliance | JB/T 7444–1994, IEC 60540 |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | METRASTAT 780 |
| Price | Upon Request |
| Max Temperature | 200–300 °C |
| Temperature Range | 50–300 °C ±1% |
| Heating Power | 2400 W (12 × 200 W elements) |
| Heating Rate | RT → 300 °C in ~10 min |
| Sample Capacity | 10 positions (260 × 12 × 6 mm trays) |
| Preheat Duration | Adjustable from 1 min to unlimited |
| Test Duration | Programmable from 1 min to 32 days |
| Dimensions (W×H×L) | 450 × 400 × 790 mm |
| Weight | 61 kg |
| Construction Material | 316L stainless steel |
| Control Sensor | Pt1000 RTD |
| Power Supply | 185–245 VAC, 48–62 Hz |
| Brand | MKN |
|---|---|
| Model | RLH Series |
| Temperature Range | RT+10°C to 300°C (RLH-010/RLH-025) / RT+10°C to 200°C (LH-010/LH-025) |
| Temperature Uniformity | ≤ ±1.5% |
| Temperature Fluctuation | ≤ ±0.5°C |
| Heating Rate | 20°C to 300°C in 70 min (RLH models) |
| Chamber Interior | AISI 304 Stainless Steel |
| Insulation | High-Density Glass Fiber + Rigid Polyurethane Foam |
| Air Exchange Rate | Adjustable up to 300 cycles/hour |
| Controller | Programmable Microprocessor-Based PID Controller with Timer Function |
| Sensor | PT100 Platinum Resistance Thermometer |
| Power Supply | 220 VAC, 50 Hz or 380 VAC, 50 Hz (3-phase, 4-wire) |
| Optional Turntable Speed | 10–12 rpm |
| Brand | OK Instruments |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 14,200 (FOB) |
| Internal Dimensions (D×H) | Φ250×300 mm to Φ650×600 mm |
| External Dimensions (W×H×D) | 500×500×700 mm to 950×900×1100 mm |
| Operating Temperature Range | 105–135 °C (143 °C optional) |
| Relative Humidity Range | 70–100 % RH |
| Steam Pressure Range | 0.0–2.0 kg/cm² (gauge) |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Safety Protections | Low-water cutoff, overpressure relief, auto/manual water replenishment, automatic pressure venting |
| Standard Accessories | Two stainless-steel shelves |
| Air Circulation | Forced steam convection |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 2,600 (Reference Only) |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour |
| Adjustable Air Exchange Interval | 1 min – 99 h |
| Power Rating | 4.0–9.0 kW |
| Internal Dimensions (L×W×H, mm) | 450×450×500 to 800×1000×1000 |
| External Dimensions (L×W×H, mm) | 1100×830×1600 to 1450×1400×2100 |
| Turntable Diameter | Φ250–Φ700 mm |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93 (2005), UL 1581, GB, VDE, JIS, IEC |
| Brand | OK Instruments |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,600 (Reference Only) |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour |
| Adjustable Air Exchange Time | 1 min – 99 h |
| Chamber Volume Options | 100 L – 800 L |
| Power Consumption | 4.0–9.0 kW |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93 (2005), UL 1581, GB/T 2423.2, IEC 60068-2-2, JIS C 60068-2-2, VDE 0470 |