Life Science Instruments
Filter
Showing 391–420 of 7519 results
| Brand | Applied Biosystems |
|---|---|
| Origin | USA |
| Model | ABI3730XL |
| Category | Imported Instrument |
| Condition | Refurbished Unit |
| Sample Throughput | 96-capillary array |
| Read Length | Up to 1,000 bases (typical under standard POP-7 polymer and BigDye Terminator v3.1 chemistry) |
| Data Output Format | AB1 (.ab1), SCF, FASTA, QUAL |
| Base Calling Accuracy | ≥99.99% (Q40+ for >80% of bases in high-quality templates) |
| Run Time | ~2.5 hours per 96-well plate (standard sequencing protocol) |
| Detection System | CCD-based fluorescence detection with four-color laser excitation (488 nm, 532 nm, 595 nm, 635 nm) |
| Capillary Array | 96 × 50 cm fused-silica capillaries with polymer matrix (POP-7 or POP-6) |
| Brand | Applied Biosystems |
|---|---|
| Origin | USA |
| Model | ArcturusXT™ |
| Laser Types | Near-Infrared (NIR) for LCM + Ultraviolet (UV) for Precision Cutting |
| Microscope Platform | Nikon Eclipse® Ti-E Inverted Research Microscope |
| Sample Compatibility | Glass slides, membrane-coated slides (contact/non-contact), petri dishes, standard glass |
| Software | ArcturusXT™ Control Software + Optional AutoScanXT Image Analysis Module |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | Applied Biosystems |
|---|---|
| Origin | Singapore |
| Model | ATC |
| Sample Capacity | 96-well and 384-well plates |
| Ramp Rate | 3.5°C/s |
| Temperature Accuracy | ±0.25°C (35–99.9°C) |
| Well-to-Well Uniformity | ≤0.5°C (20 seconds after reaching 95°C) |
| Compliance | SiLA Rapid Integration™ certified |
| Software Interface | RESTful APIs, preconfigured for Beckman Coulter, Hamilton, and other major automation platforms |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | Singapore |
| Model | 9700 Series |
| Instrument Type | Standard Thermal Cycler |
| Sample Capacity | 96-well, 60-well, Dual 96-well, Dual 384-well |
| Ramp Rate | 5 °C/s |
| Temperature Accuracy | ±0.25 °C |
| Well-to-Well Uniformity | ±0.5 °C (30 sec after reaching 95 °C) |
| Brand | Applied Biosystems |
|---|---|
| Model | GeneAmp® 9700 |
| Origin | USA |
| Temperature Accuracy | ±0.25°C (35–100°C) |
| Temperature Range | 4–99°C |
| Ramp Rate | 3.5°C/sec (55–95°C) |
| Block Uniformity | ±0.5°C (35–100°C, 30 sec hold) |
| Heat Lid Temperature | 105°C |
| Display Resolution | 0.1°C (computed sample temperature) |
| Dimensions | 40.6 × 30 × 26 cm |
| Weight | 12.7 kg |
| Sample Formats | Interchangeable blocks — 60-well (0.5 mL), 96-well (0.2 mL), dual 96-well, dual 384-well |
| Software | GeneAmp 9700 Network Software (multi-instrument control) |
| Compliance | Designed for GLP/GMP environments |
| Brand | Applied Biosystems |
|---|---|
| Origin | Singapore |
| Model | MiniAmp |
| Instrument Type | Standard PCR Thermal Cycler |
| Sample Capacity | 96-well format |
| Heating Rate | 3.0 °C/sec |
| Temperature Accuracy | ±0.25 °C (35–99.9 °C) |
| Well-to-Well Uniformity | <0.5 °C (measured 30 sec after reaching 95 °C) |
| Brand | Applied Biosystems |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | MiniAmp Plus |
| Instrument Type | Gradient PCR Thermal Cycler |
| Sample Capacity | 96-well format |
| Heating Rate | 3.5 °C/s |
| Temperature Accuracy | ±0.25 °C (35–99.9 °C) |
| Well-to-Well Uniformity | < 0.5 °C (30 seconds after reaching 95 °C) |
| Origin | Singapore |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | ProFlex 2×384-well PCR System |
| Instrument Type | Standard Thermal Cycler |
| Sample Throughput | 2 × 384-well plates |
| Ramp Rate | 3.0 °C/sec |
| Temperature Accuracy | ±0.25 °C (35–99.9 °C) |
| Well-to-Well Uniformity | <0.5 °C (20 sec after reaching 95 °C) |
| Brand | Applied Biosystems |
|---|---|
| Origin | Singapore |
| Model | ProFlex 2×Flat PCR System |
| Instrument Type | Standard Thermal Cycler |
| Sample Throughput | 2 × 96-well flat plates (0.2 mL) |
| Heating Rate | 1.6°C/s |
| Temperature Accuracy | ±0.25°C (35–99.9°C) |
| Inter-well Temperature Uniformity | <0.5°C (20 sec after reaching 95°C) |
| Module Configuration | Dual independent flat-block thermal modules |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | Singapore |
| Manufacturer | Thermo Fisher Scientific |
| Instrument Type | Gradient PCR System |
| Sample Capacity | 3 × 32-well modules |
| Heating Rate | 6.0 °C/s |
| Temperature Accuracy | ±0.25 °C (35–99.9 °C) |
| Well-to-Well Uniformity | <0.5 °C (20 s after reaching 95 °C) |
| Module Options | Interchangeable 3×32-well, dual 96-well, dual-flat-block, and digital PCR chip modules |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | Singapore |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported Instrument |
| Model | ProFlex 96-Well PCR System |
| Instrument Type | Gradient PCR Thermal Cycler |
| Sample Throughput | 96-well format |
| Heating Rate | 6.0 °C/s |
| Temperature Accuracy | ±0.25 °C (35–99.9 °C) |
| Well-to-Well Temperature Uniformity | <0.5 °C |
| Brand | Applied Biosystems |
|---|---|
| Origin | Singapore |
| Model | ProFlex |
| Instrument Type | Gradient PCR Thermal Cycler |
| Sample Capacity | 32-well, 96-well, dual 96-well, dual 384-well, and 24 × 20k Digital PCR Chip modules |
| Ramp Rate | Up to 6.0 °C/s (user-adjustable) |
| Temperature Accuracy | ±0.25 °C (35–99.9 °C) |
| Well-to-Well Uniformity | < 0.5 °C (measured 20 s after reaching 95 °C) |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | Singapore |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | ProFlex™ 2 x 96-well PCR System |
| Heating Rate | 3.0°C/s |
| Temperature Accuracy | ±0.25°C (35–99.9°C) |
| Well-to-Well Temperature Uniformity | <0.5°C (20 seconds after reaching 95°C) |
| Sample Capacity | 2 × 96-well plates |
| Instrument Type | Conventional Thermal Cycler |
| Compatible Module Options | Dual 96-well, Triple 32-well, Dual Flat Block, 96-well Fast, and Digital PCR Chip Block (for QuantStudio™ 3D) |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | Manufactured in China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Real-Time Fluorescent Quantitative PCR System |
| Model | QuantStudio 1 Plus |
| Sample Capacity | 96-well format |
| Maximum Heating Rate | 3.5 °C/sec |
| Average Heating Rate | 1.8 °C/sec |
| Temperature Accuracy | ±0.25 °C |
| Well-to-Well Temperature Uniformity | ±0.4 °C |
| Dye Calibration | Factory-calibrated for FAM, VIC, ROX, and Cy5 fluorophores |
| Dynamic Range | 10 logs |
| Detection Sensitivity | Single-copy DNA detection |
| Concentration Discrimination | Capable of resolving 1.5-fold differences in target concentration |
| Run Time (Fast Mode) | ≤40 minutes for 40-cycle amplification |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | QuantStudio 7 Pro |
| Instrument Type | Real-Time Fluorescent Quantitative PCR System |
| Sample Throughput | 96-well format |
| Maximum Heating Rate | 6.5°C/s |
| Average Heating Rate | 3.66°C/s |
| Temperature Accuracy | ±0.25°C |
| Well-to-Well Temperature Uniformity | ±0.4°C |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | Singapore |
| Manufacturer | Thermo Fisher Scientific |
| Product Type | Imported Digital PCR Instrument |
| Model | QuantStudio Absolute Q |
| Sample Throughput | Up to 16 samples per run on a single MAP16 microfluidic array plate (configurable in multiples of 4: 4, 8, 12, or 16) |
| Fluorescence Channels | 5-color detection (factory-calibrated) |
| Detection Principle | Nanowell-based digital PCR using fixed-volume microfabricated wells |
| Effective Partitioning Efficiency | >95% active reaction partitions |
| Dead Volume | <5% |
| Integrated Workflow | Fully automated droplet generation, thermal cycling, fluorescence imaging, and data analysis |
| Run Time | ~90 minutes from sample loading to final quantification report |
| Software Compliance | Supports audit trail, user access control, and electronic signature per FDA 21 CFR Part 11 requirements |
| Brand | Applied Biosystems |
|---|---|
| Origin | Singapore |
| Instrument Type | Gradient PCR System |
| Sample Capacity | 96-well format |
| Heating Rate | 4°C/sec |
| Temperature Accuracy | ±0.25°C (35–99.9°C) |
| Well-to-Well Temperature Uniformity | <0.5°C (measured 30 sec after reaching 95°C) |
| Thermal Control Architecture | VeriFlex™ 3-Zone Independent Peltier Module |
| Interface | Capacitive Touchscreen, USB 2.0, Wi-Fi 802.11 b/g/n |
| Software Compatibility | Thermo Fisher Connect Cloud Platform, compatible with standard .pcr file import/export |
| Origin | Singapore |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | Veriti |
| Instrument Type | Standard Thermal Cycler |
| Sample Capacity | 96-well, 384-well, 60-well, and Fast 86-well formats |
| Ramp Rate | 5.00 °C/sec |
| Temperature Accuracy | ±0.25 °C (35–99 °C) |
| Well-to-Well Uniformity | <0.5 °C (measured 20 sec after reaching 95 °C) |
| Brand | Applied Biosystems |
|---|---|
| Origin | Singapore |
| Model | VeritiPro |
| Instrument Type | Gradient PCR System |
| Sample Capacity | 96-well (0.2 mL) and 384-well (0.02 mL) blocks |
| Heating Rate | 6.0°C/s |
| Temperature Accuracy | ±0.25°C (35–99.9°C) |
| Well-to-Well Temperature Uniformity | <0.25°C (at 95°C, measured 30 s after target reached) |
| VeriFlex™ Block | 6 independently controlled thermal zones |
| Thermal Lid | 30–110°C, pressure-adjustable, auto-lift |
| Operating Voltage | 100–240 V, 50–60 Hz |
| Power Consumption | ≤700 W |
| Dimensions (H×W×D) | 21.7 × 24.5 × 46.5 cm |
| Weight | 12.0 kg |
| Environmental Requirements | 15–30°C, 15–80% RH (non-condensing) |
| Brand | Thermo Fisher Scientific |
|---|---|
| Origin | Singapore |
| Model | 2720 |
| Instrument Type | Standard PCR Thermal Cycler |
| Sample Capacity | 96-well format |
| Ramp Rate | 2.7 °C/s |
| Temperature Accuracy | ±0.25 °C |
| Well-to-Well Uniformity | ±0.5 °C (measured 30 s after reaching 95 °C) |
| Dimensions | Compact benchtop design |
| User Interface | Graphical LCD with intuitive navigation |
| Brand | Getinge |
|---|---|
| Origin | Sweden |
| Distributor Type | Authorized Distributor |
| Import Status | Imported |
| Models | MiniBio, Bio, AppliFlex ST |
| Pricing | Available Upon Request |
| Brand | Getinge |
|---|---|
| Origin | Sweden |
| Model | BioSep System, BioSep Controller |
| Type | Scalable Perfusion Cell Retention Device |
| Brand | Getinge |
|---|---|
| Origin | Switzerland |
| Product Type | Integrated Bioreactor Controller (Not a standalone sensor) |
| Category | Benchtop Bioprocess Control System |
| Compliance | Designed for GMP-aligned bioprocessing environments |
| Brand | Getinge |
|---|---|
| Origin | Sweden |
| Model Variants | MiniBio 250, MiniBio 500, MiniBio 1000 |
| Vessel Working Volume | 250 mL, 500 mL, and 1000 mL (respectively) |
| Configuration | Modular, Sterile-Ready Benchtop Bioreactor Platform |
| Control Architecture | Integrated PID-based Process Control with Analog/Digital I/O Expansion Capability |
| Compliance | Designed to Support GLP/GMP-aligned workflows and ASTM E2500-23 risk-based qualification principles |
| [Brand | Applitech |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | AbioBundle Glass Vessel Bioreactor |
| Pricing | Upon Request] |
| Brand | Applitech |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Product Origin | Domestic |
| Model | AbioPilot |
| Quotation | Upon Request |
| Working Volume Range | 30–270 L |
| Material | 316L Stainless Steel |
| Surface Finish | Electropolished (Ra < 0.4 µm) for Wetted Parts |
| External Finish | Brushed or Mirror-Polished |
| Design Standard | ASME BPE-2023 Compliant |
| Brand | Applitech |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | AbioSUS® Single-Use Bioreactor |
| Volume Options | 50 L, 200 L, 500 L, 1000 L, 2000 L |
| Temperature Control Range | 8–40 °C ±0.1 °C (with chilled water ≤8 °C) |
| Weighing Accuracy | C6-class load cell system |
| Bag Material | 7-layer co-extruded film, USP Class VI & ISO 10993 compliant |
| Stirring System | Dual marine impeller configuration |
| Aeration | Dual bottom gas inlets (0.8 mm coarse sparger + 150 µm microsparger) |
| Control Platform | AbioControl® IDS.S modular controller with 5-tier user permissions and 21 CFR Part 11-compliant audit trail |
| Brand | Applitech |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | AbioWelder™ 100 |
| Pricing | Upon Request |
| Brand | Applitech |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | AppliAsep Aseptic Sampling System |
| Pricing | Available Upon Request |
| Brand | Applitech |
|---|---|
| Model | Countleader FL 100 |
| Detection Principle | Digital Imaging Cytometry with Dual-Channel Fluorescence (470/525 nm & 535/617 nm) |
| Sample Volume | 15 µL per well |
| Throughput | Up to 8 samples simultaneously |
| Analysis Modes | Brightfield, Trypan Blue Exclusion, AO/PI Dual-Fluorescence, GFP/RFP Transfection Efficiency |
| Compliance | FDA 21 CFR Part 11, GLP/GMP-ready |
| Consumable | Proprietary FL8-slide (8-well, single-use) |
| Software | Integrated image analysis platform with audit trail, electronic signature, and 3Q validation support |
| Data Output | PDF, Excel, TIFF |
| User Management | Three-tier role-based access control (Administrator, Operator, Viewer) |