Particle/Powder Analysis Instruments
Filter
Showing 151–180 of 340 results
| Brand | DT (USA) |
|---|---|
| Origin | USA |
| Model | DT-700 |
| Measurement Range | 0–200 µS/m |
| Resolution | 1 µS/m |
| Accuracy | ±2% of reading |
| Probe Operating Temperature | −20 °C to +200 °C |
| Display | LCD |
| Interface | USB for external storage export |
| Form Factor | Portable handheld unit |
| Brand | Jinan Winner |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Winner2000ZDE |
| Dispersion Method | Wet Dispersion |
| Measurement Range | 0.1–300 µm |
| Repeatability | <0.5% (D50 of NIST-traceable standard reference material) |
| Measurement Time | <2 min per run |
| Laser Source | He-Ne, λ = 632.8 nm, output power >2 mW, lifetime >25,000 h |
| Detector Channels | 39 |
| Standards Compliance | ISO 13320:2020, GB/T 19077–2016, Q/0100JWN001–2013 |
| Ultrasonic Dispersion | 40 kHz, 35 W, adjustable duration ≥1 s |
| Stirring Speed | 0–3000 rpm (continuously adjustable) |
| Circulation Flow Rate | 8 L/min |
| Sample Cell Volume | 350 mL |
| Dimensions | 860 × 360 × 440 mm |
| Weight | 40 kg |
| Brand | ERALYTICS |
|---|---|
| Origin | Austria |
| Model | ERACOUNT XS |
| Instrument Type | Optical Particle Counter |
| Calibration Standard | ISO 11171, traceable to NIST |
| Particle Size Channels | 4, 6, 14, 21, 25, 30, 38, 70 µm(c) |
| Measurement Time | as fast as 30 s |
| Sample Volume | 5 mL (at 10 mL/min) or 12.5 mL (at 25 mL/min) |
| Viscosity Range | up to 1000 cSt at 22 °C |
| Operating Temperature | −10 to 50 °C |
| Sample Temperature Range | 5 to 60 °C |
| Maximum Detectable Particle Size | 230 µm |
| Compliance | ISO 4406, ISO 11171, ISO 4402, SAE AS4059 |
| Origin | Netherlands |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | EyeTech |
| Price Range | USD 110,000–138,000 |
| Dispersion Method | Dry & Wet |
| Measurement Range | 0.01–3600 µm |
| Repeatability | <1% RSD |
| Measurement Time | 10–60 s |
| Concentration Range | ~10⁹ particles/mL |
| Light Source | Stabilized He–Ne Laser (632.8 nm) |
| Laser Resolution | 0.33% of full scale |
| Detector | Silicon PIN Photodiode |
| Stroboscopic Illumination | Adjustable intensity & pulse duration |
| Camera | High-resolution monochrome CCD |
| Shape Parameters | 40 ISO-compliant morphological descriptors |
| Sample Introduction | Liquid suspension, dry powder, microscope slide-mounted |
| Software Compliance | FDA 21 CFR Part 11 (audit trail, user roles, electronic signatures) |
| Brand | Ankersmid |
|---|---|
| Origin | Netherlands |
| Model | EyeTech Laser Particle Size and Shape Analyzer |
| Dispersion Method | Dry & Wet |
| Instrument Type | Laboratory Laser Particle Analyzer |
| Measurement Range | 0.1–3600 µm |
| Repeatability | <1% |
| Measurement Time | 30–60 s |
| Principle | Combined Laser Obscuration (LO) and Dynamic Image Analysis (DIA) |
| Origin | Netherlands |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | EyeTech-Laser |
| Price Range | USD 27,000 – 41,000 (FOB Rotterdam) |
| Origin | Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | Eyetech-Shape DSA-10 |
| Price | Upon Request |
| Measurement Principle | High-Speed Synchronized Stroboscopic Imaging + Digital Image Analysis |
| Particle Size Range | 1 µm – 6 mm |
| Camera Resolution | 640 × 480 px monochrome CCD |
| Strobe Frequency | 1 Hz or 30 Hz (adjustable) |
| Illumination | Software-controlled variable-intensity stroboscopic light source |
| Optical Configuration | Interchangeable dual-magnification lens system (3 objective lenses included) |
| Focus | Motorized focus control |
| Analysis Speed | >10,000 particles per minute (typical), full geometric characterization per frame in <1 s |
| Output Data | Equivalent circular diameter, projected area, perimeter, aspect ratio, convexity, roundness, solidity, elongation, and custom shape factor distributions |
| Brand | Fastmicro |
|---|---|
| Origin | Netherlands |
| Model | FM-PS-PFS-V02 |
| Measurement Principle | Dark-field Mie scattering |
| Measurement Range | 0.5–150 µm |
| Repeatability | ≥90% |
| Measurement Interval | ≤10 s per scan |
| Field of View (FOV) | Ø25 mm (on 50 mm replaceable substrate) |
| Environmental Operation | Ambient pressure and vacuum-compatible |
| Compliance | ISO 14644-9, ISO 14644-17 |
| Output Formats | KLARF, Excel, PDF (ISO-compliant qualification reports) |
| Software | Integrated real-time analysis with annotated imaging and 3D signal profiling |
| Brand | Aode |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | Domestic (China) |
| Model | Aode305-11231 |
| Product Type | Intelligent |
| Display Interface | PC-based Software |
| Measurement Range | 0.20–50 µm |
| Repeatability | ±3% |
| Porosity Range | 0.25–0.95 |
| Inlet Gas Pressure | 3 kPa |
| Brand | FlowCam |
|---|---|
| Origin | Japan |
| Model | FlowCam 5000 |
| Particle Size Range | 3–300 µm |
| Camera Resolution | 1920 × 1200 pixels (color CMOS) |
| Frame Rate | up to 100 fps |
| Optical Configurations | 4X (300 µm depth), 10X (100 µm depth), 20X (50 µm depth) |
| Sample Flow Rate | 0.05–2 mL/min |
| Max Particle Concentration | 4 × 10⁶ particles/mL (at 3 µm) |
| Dimensions | 44 × 25 × 27 cm |
| Weight | 10 kg (operational), 24 kg (shipping) |
| Power Consumption | ≤92 W |
| Brand | Formulaction |
|---|---|
| Origin | France |
| Model | Turbiscan AGS |
| Particle Size Range | 0.05–1000 µm |
| Concentration Range | up to 95% v/v |
| Temperature Control | 25–60 °C (±0.5 °C) |
| Sample Capacity | 54 positions (3 × 18-well thermostated modules) |
| Scan Resolution | 40 µm along 55 mm height |
| Scan Interval | as low as 20 s per scan |
| Light Source | Pulsed NIR LED (880 nm) |
| Detectors | Synchronized transmission and backscattering photodiodes |
| Compliance | ASTM D7809, ISO 13321, USP <729>, GLP-ready data audit trail |
| Brand | Formulaction |
|---|---|
| Origin | France |
| Model | TURBISCAN LAB |
| Measurement Principle | Static Multiple Light Scattering (MLS) |
| Wavelength | 880 nm (pulsed NIR source) |
| Scan Height | 55 mm |
| Spatial Resolution | 20 µm |
| Temp. Range | +5 °C above ambient to 60 °C |
| Temp. Control Accuracy | ±0.5 °C |
| Particle Size Range | 0.01–1000 µm |
| Max. Concentration | 95% v/v |
| Detectors | Dual photodiode (transmission + backscattering) |
| Sample Cell | Cylindrical glass cell (Ø 27.5 mm × H 55 mm), threaded black cap with butyl/PTFE seal |
| Data Acquisition Modes | Full-height scanning (1 scan/20 s) or fixed-position kinetics (1 measurement/s) |
| Max. Scan Programs | 250 |
| Software Output | BS/T vs. time, layer thickness vs. time, particle migration velocity, hydrodynamic diameter (d), volume fraction (φ), mean free path, TSI Stability Index, dispersion index |
| Brand | Formulaction |
|---|---|
| Origin | France |
| Model | TURBISCAN TOWER |
| Detection Principle | Multiple Light Scattering (MLS) |
| Wavelength | 880 nm (pulsed NIR source) |
| Sample Capacity | 6 positions |
| Temperature Range | 4–80 °C |
| Temp. Control Accuracy | ±0.1 °C |
| Scan Height | 55 mm |
| Spatial Resolution | 20 µm per data point |
| Scan Interval | ≥20 s (user-configurable) |
| Particle Size Range | 0.01–1000 µm |
| Max. Concentration | 95% v/v |
| Measurement Modes | Transmission (T) and Backscattering (BS) |
| Software Compliance | FDA 21 CFR Part 11 ready, audit trail enabled, GLP/GMP-supportive workflows |
| Brand | Formulaction |
|---|---|
| Origin | France |
| Model | TURBISCAN TRI-LAB |
| Light Source | 880 nm NIR LED |
| Sample Volume | 1.5–30 mL |
| Temperature Range | 20–60 °C |
| Sample Capacity | 1–3 positions |
| Concentration Range | 0.0001–95% v/v |
| Measurement Principle | Static Multiple Light Scattering (SMLS) |
| Detection Modes | Simultaneous Transmitted (T) and Backscattered (BS) Light |
| Output Metrics | Turbiscan Stability Index (TSI), Migration Rate, Phase Thickness, Kinetic Index, Mean Hydrodynamic Diameter, Dispersion Ratio, Redispersion Efficiency |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | ANALYSETTE 18 |
| Voltage | 230 V, 1~ |
| Frequency | 50–60 Hz |
| Input Power | 480 W |
| Sieving Method | Dry Sieving |
| Sample Condition | Dry |
| Sieving Range (Dry) | 20 µm – 125 mm |
| Max. Sample Load | 6 kg |
| Sieving Time | 5–60 min |
| Dimensions (W×L×H) | 58 × 58 × 39 cm |
| Net Weight | 92 kg |
| Gross Weight | 129 kg |
| Motor Type | Two maintenance-free asymmetric motors |
| Motion Type | Simultaneous horizontal and vertical oscillation |
| Compliance | ISO 3310-1, ASTM E11-95, ISO 9000 traceable calibration |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | Analysette 18 |
| Measurement Principle | Dry Mechanical Vibratory Sieving |
| Max. Sample Capacity | 15 kg (standard), up to 25 kg with optional large-diameter sieve stack |
| Sieve Aperture Range | 20 µm – 125 mm |
| Max. Sieve Diameter | 450 mm (18") |
| Sieving Time | 5–60 min |
| Drive System | Dual Asymmetric Counter-Rotating Motors |
| Compliance | ISO 2591-1, ISO 9276-1, ASTM E11, USP <786> |
| Software | AUTOSIEVE v5.x (FDA 21 CFR Part 11 compliant audit trail & user access control) |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | Analysette 3 |
| Compliance | ISO 3310, ASTM E11, DIN 66165, EN 10204 3.1B |
| Measurement Range (Dry) | 32 µm – 63 mm |
| Measurement Range (Wet) | 20 µm – 10 mm |
| Measurement Range (Micro-fine) | 5 µm – 100 µm |
| Max Sieve Stack (50 mm) | 10 trays |
| Max Sieve Stack (25 mm) | 16 trays |
| Sample Capacity (Dry, <100 µm) | >100 kg |
| Sample Capacity (Dry, <25 mm) | >1 kg |
| Sample Capacity (Wet) | 20–100 g |
| Sample Capacity (Micro-fine) | 0.2–0.5 g |
| Sieving Duration (Dry) | 3–20 min |
| Sieving Duration (Wet) | 3–10 min |
| Sieving Duration (Micro-fine) | 30–60 min |
| Amplitude Display | Digital (mm) |
| Frequency Display | Digital (Hz) |
| Control Interface | RS232 |
| Software | AUTOSIEVE™ |
| IP Rating | IP65 |
| Tension Control | Electronic torque-controlled sieve clamping system |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | ANALYSETTE 3 PRO |
| Dry Sieving Range | 32 µm – 63 mm |
| Wet Sieving Range | 20 µm – 10 mm |
| Micro Sieving Range | 5 µm – 100 µm |
| Sample Capacity (Dry) | <100 g (for <100 µm), <1 kg (for <25 mm) |
| Sample Capacity (Wet) | 20–100 g |
| Sample Capacity (Micro) | 0.2–0.5 g |
| Sieving Time (Dry) | 3–20 min |
| Sieving Time (Wet) | 3–10 min |
| Sieving Time (Micro) | 30–60 min |
| Max. Stackable Sieve Trays | 10 × 50 mm trays or 16 × 25 mm trays |
| Compliance | ISO 3310-1/-2, ASTM E11, DIN 66165, EN 10204 3.1B |
| Software Interface | AUTOSIEVE (PC-connected, GLP-compliant data logging) |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | Analysette 3 SPARTAN |
| Dry Method Range | 32 µm – 63 mm |
| Wet Method Range | 20 µm – 10 mm |
| Sample Capacity (Dry) | up to 2 kg |
| Sample Capacity (Wet) | 20–100 g |
| Sieving Time (Dry) | 3–20 min |
| Sieving Time (Wet) | 3–10 min |
| Max. Stackable Sieve Trays | 10 × Ø50 mm or 16 × Ø25 mm |
| Sieve Compliance | ISO 3310-1 & ASTM E11 |
| Net Weight | 21 kg |
| Gross Weight | 26 kg |
| Brand | Granutools |
|---|---|
| Origin | Belgium |
| Model | Granucharge |
| Measurement Principle | Triboelectric Charge Quantification via Faraday Cup and Electrometer |
| Sample Volume Range | 10 mL – 999,999,999 mL (practically unlimited with modular feed control) |
| Charge Resolution | ≤ 0.5 nC |
| Repeatability | ±4% RSD |
| Sample Contact Surface | Interchangeable V-tube liners (standard 316L stainless steel |
| Environmental Control | Integrated temperature & relative humidity monitoring (external chamber integration supported) |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Software | Offline analysis license included |
| Brand | Granutools |
|---|---|
| Origin | Belgium |
| Model | Granudrum |
| Sample Capacity | 50 mL (max), 10 mL (min) |
| Measurable Parameter | Dynamic Cohesion Index & Flow Angle |
| Rotation Speed Range | 2–60 rpm |
| Measurement Principle | Rotating Drum Imaging with CCD-Based Interface Analysis |
| Compliance | Designed for GLP/GMP-aligned workflows, supports audit-trail-capable data export |
| Brand | Granutools |
|---|---|
| Origin | Belgium |
| Model | Granuflow |
| Sample Capacity | 500 mL (max), 50 mL (min) |
| Measurable Parameters | Flow Rate Index, Beverloo Curve |
| Orifice Array | 7 calibrated circular orifices (1–38 mm diameter) |
| Measurement Principle | Gravimetric mass-flow vs. time slope analysis |
| Compliance | ASTM B213, ISO 4490, USP <1174> |
| Reproducibility | ±2% RSD |
| Measurement Duration | <5 min per test |
| Data Output | Cb (Beverloo flow index), Dmin (minimum orifice diameter), mass flow rate (g/s) |
| Brand | Granutools |
|---|---|
| Origin | Belgium |
| Model | Granuheap |
| Instrument Type | Powder Heap Angle Analyzer |
| Measurable Parameter | Angle of Repose |
| Maximum Sample Vessel Capacity | 8 mL |
| Minimum Sample Volume | 4–8 mL |
| Automation Level | Fully Automated |
| Measurement Principle | Image-based heap geometry analysis with rotational multi-angle imaging |
| Brand | Granutools |
|---|---|
| Origin | Belgium |
| Model | Granupack |
| Sample Capacity | 40 mL (max), 10 mL (min) |
| Measurable Parameters | Bulk Density, Tapped Density, Hausner Ratio, Compaction Curve |
| Measurement Accuracy | ±0.4% for metallic powders, ±0.6% for pharmaceutical excipients |
| Drop Height Options | ΔZ = 1 mm or 3 mm |
| Compliance | European Pharmacopoeia (Ph. Eur. 2.9.34) |
| Brand | Beijing Hangfeng |
|---|---|
| Origin | Beijing, China |
| Model | HMD-1 |
| Measurement Principle | Oscillating U-tube (Digital Density Determination) |
| Sample Volume | 2 mL |
| Display | Color LCD with backlighted viewing window |
| Power | Rechargeable battery (≥6 h continuous operation) |
| Accuracy | ±0.001 g/cm³ |
| Temperature Control | Peltier-assisted (±0.02 °C stability) |
| Compliance | ISO 12084, ASTM D4052, USP <841> |
| Brand | Huameike (LABULK) |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Manufacturer |
| Origin Category | Domestic |
| Model | HMK-200 (01081623) |
| Principle | Air Jet Sieving |
| Measurement Range | 3–5000 µm |
| Maximum Load | 2000 g |
| Sieve Stages | Single-stage |
| Brand | LABULK |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Direct Manufacturer |
| Product Type | Intelligent |
| Display | Digital Readout Panel, Touchscreen, PC Interface |
| Measurement Principle | Fisher Air Permeability (HMK-22), Air Jet Sieving (HMK-200), Static Light Scattering / Mie Theory (AS-2011) |
| Size Range | 0.2–50 µm (HMK-22), 3–5000 µm (HMK-200), 0.1–500 µm (AS-2011) |
| Repeatability | ≤3% (HMK-22), ≤3% (HMK-200), <1% (AS-2011) |
| Porosity Range | 0.25–0.95 (HMK-22) |
| Air Pressure | 0–10 kPa (HMK-200), 5 kPa (HMK-22) |
| Power Supply | 220 V / 50 Hz (all models), 110 V / 60 Hz (HMK-22 optional) |
| Weight | 18 kg (HMK-22), 14.8 kg (HMK-200), N/A (AS-2011) |
| Dimensions | 41.8 × 24.6 × 73.7 cm (HMK-22), 58 × 35 × 35 cm (HMK-200), N/A (AS-2011) |
| Compliance | ISO 13320-1 (AS-2011), ASTM B330 (HMK-22), ISO 4497 (HMK-200) |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | LA-350 |
| Dispersion Method | Wet Dispersion |
| Measurement Range | 100 nm – 1000 µm |
| Repeatability | <1% RSD |
| Measurement Time | 10 s |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | LA-960 V2 |
| Dispersion Method | Dry & Wet Dispersion |
| Measurement Range | 10 nm – 5000 µm |
| Repeatability | ±0.1% |
| Measurement Time | 10 seconds |
| Brand | HORIBA |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | Partica CENTRIFUGE CN-300 |
| Measurement Principle | Centrifugal Sedimentation |
| Measured Range | 10 nm – 40 µm |
| Maximum Centrifugal Force | 30,000 × g |
| Temperature Control | Integrated Peltier Cooling for Sample Cell and Rotor |
| Measurement Modes | Density Gradient Mode & Homogeneous Mode |
| Sample Volume | As low as 2 µL (undiluted) or 10 µL (diluted) |
| Compliance | IEC 61010-1:2010 / IEC 61010-2-020:2016 |