Particle/Powder Analysis Instruments
Filter
Showing 241–270 of 340 results
| Brand | POWEREACH |
|---|---|
| Origin | Shanghai, China |
| Model | JS94K2-3H20X |
| Zeta Potential Range | ±200 mV (typical, system-limited) |
| pH Range | 1.6–13.0 (standard operation 2.0–12.0, resolution 0.1) |
| Temperature Range | Ambient to 35 °C (readout resolution 0.1 °C) |
| Particle Size Compatibility | 0.2–50 µm |
| Optical Resolution | 1.93–12 pixels/µm (motorized zoom optical system) |
| Power Consumption | <150 W |
| Compliance | GB/T 32668–2016 (General Rules for Zeta Potential Analysis of Colloidal Particles by Electrophoresis) |
| System Accuracy | ±5% relative error (per certified reference dispersions under controlled conditions) |
| Sample Volume per Measurement | 0.5 mL |
| Voltage Polarity Switching Interval | 0.30–1.20 s (adjustable) |
| Measurement Time per Cycle | 3–10 s |
| Light Source | Low-power semiconductor blue/green LED (non-thermal, near-field illumination) |
| Brand | PS |
|---|---|
| Origin | Switzerland |
| Model | XPT-CP&CV |
| Product Type | Intelligent Online Analyzer |
| Display | Digital |
| Measurement Range | 10 µm – 3 mm |
| Compliance | ASTM E2457, ISO 13322-2, FDA 21 CFR Part 11 (with hardware token & electronic signature) |
| Configuration Options | XPT-P (in-process probe), XPT-C (suspension flow cell), XPT-CP (powder feeder + vibratory dosing), XPT-CV (Venturi vacuum-sampling closed-loop system) |
| Enclosure Rating | IP65 (XPT-CV), Stainless Steel Housing |
| Imaging | High-speed CCD with ultra-short shutter time or pulsed LED illumination |
| Frame Rate | ≥30 fps |
| Data Throughput | Thousands of particles analyzed and stored per second |
| Software Architecture | Parallelized real-time image acquisition and analysis engine |
| Brand | PSS (Particle Sizing Systems) |
|---|---|
| Model | AccuSizer 780 A9000 FX-MD |
| Detection Principle | Focused Light Obscuration & Single Particle Optical Sizing (SPOS) |
| Size Range | 0.6 µm – 20 µm |
| Maximum Sample Concentration | 1 × 10¹² particles/mL |
| Number of Adjustable Channels | 32 user-defined |
| Flow Rate | 15 – 180 mL/min |
| Sample Volume | 2 – 10 mL |
| Diluent | Ultrapure water (standard), organic solvents (optional) |
| Power Supply | 100–120 VAC, 60 Hz or 220–240 VAC, 50 Hz |
| Dimensions (Counter Unit) | 20 cm × 45 cm × 20 cm |
| Dimensions (Auto-Dilution Unit) | 25 cm × 45 cm × 56 cm |
| Weight | ~30 kg |
| Compliance | ISO 21501-4, USP <788>, <789>, ASTM F2149, FDA 21 CFR Part 11 ready |
| Brand | Particle Sizing Systems (PSS), USA |
|---|---|
| Origin | USA |
| Model | Nicomp ZLS |
| Zeta Potential Range | ±500 mV |
| pH Range | 1–14 |
| Temperature Range | 0–90 °C |
| pH Resolution | 0.1 |
| Temperature Resolution | 0.1 °C |
| Accuracy | 99% |
| Repeatability | 99% |
| Brand | PULUODY |
|---|---|
| Origin | Shaanxi, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Optical Particle Counter |
| Detection Principle | Light Obscuration (LO) |
| Calibration Standards | ISO 11171, ISO 4402, GB/T 18854 |
| Measurement Range | 1–1000 µm (sensor-dependent) |
| Sensitivity | 1 µm (per ISO 4402), 4 µm(c) (per ISO 11171/GB/T 18854) |
| Channel Resolution | Up to 1000 user-configurable size channels |
| Sample Volume Accuracy | ±1% |
| Flow Rate | 5–60 mL/min (sampling), 10–100 mL/min (cleaning) |
| Viscosity Limit | ≤450 mm²/s |
| Operating Temperature | Ambient to 65 °C |
| Pressure Range | –0.08 to 0.8 MPa |
| Power Supply | 220 V, 50 Hz, <80 W |
| Data Storage | 3000 tests onboard |
| Compliance | DL/T 1096, GJB 420B, NAS 1638, ISO 4406, MOOG, ISO 11218, DL/T 432, ISO 11500 |
| Brand | PULUODY |
|---|---|
| Origin | Shaanxi, China |
| Model | PLD-601J |
| Instrument Type | Optical Light-Blockage Particle Counter |
| Detection Principle | Light Obscuration (LO) / Single-Particle Optical Sizing (SPOS) |
| Sensor Generation | 8th-Generation Dual-Laser Narrow-Beam Particle Sensor |
| Flow Control | Precision Metering Plunger Pump + Ultra-Precise Electromagnetic Flow Control System |
| Software Compliance | FDA 21 CFR Part 11, Audit Trail, Electronic Signature, Role-Based 5-Tier User Access |
| Calibration Standards | ISO 21501-4, JJG 1061, NIST-Traceable Latex Spheres |
| Channel Resolution | 1000 Adjustable Channels (Down to 0.01 µm), Configurable Size Ranges (e.g., 1–100 µm, 4–70 µm(c), 0.1 µm(c)) |
| Measurement Range | 1–450 µm (Extended Options: 0.03–3000 µm) |
| Sample Flow Rate | 5–150 mL/min |
| Rinse Flow Rate | 5–500 mL/min |
| Temperature Range (Fluid) | 0–80 °C |
| Ambient Operating Range | −15–50 °C |
| Accuracy | ±5% typical (per ChP 2020 & USP <788>) |
| Repeatability | <2.5% coincidence error at 1000 particles/mL |
| Resolution | >95% (ChP-calibrated), >90% (ISO 21501-4 calibrated) |
| Regulatory Alignment | ChP 0903 (2015/2020), USP <788>, <789>, <797>, EP 10.0, BP 2019, JP 17, WHO IntPh IV, YBB00272004-2015, GB 8368, ISO 21510, ISO 11171, NAS 1638, ISO 4406 |
| Brand | PULUODY |
|---|---|
| Model | PLD-601Q |
| Instrument Type | Optical Particle Counter |
| Detection Principle | Light Obscuration (LO) / Dual-Laser Narrow-Beam Sensor |
| Measurement Range | 1–450 µm (optional extension to 0.03–3000 µm) |
| Channel Resolution | 1000 adjustable channels (down to 0.01 µm bin width) |
| Sampling Flow Rate | 5–150 mL/min |
| Rinse Flow Rate | 5–500 mL/min |
| Accuracy | ±5% typical (per USP <788>, ISO 21501-4, ChP 2020) |
| Coincidence Limit | ≤5% at 1000 particles/mL |
| Temperature Range (Fluid) | 0–80 °C |
| Compliance | FDA 21 CFR Part 11, GMP/GLP audit trail, USP <788>/<789>, EP 10.0, ChP 0903, GB/T 11446.9–2013, GB 8368, ISO 21501-4, ISO 11171, NAS 1638 |
| Brand | RESUNTECH |
|---|---|
| Origin | Shenzhen, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | NanoCoulter G |
| Price Range | USD 84,000–112,000 (FOB) |
| Size Range | 60–2000 nm |
| Size Reproducibility | >90% |
| Temperature Range | 5–40 °C |
| Temperature Control Accuracy | ±5 °C |
| Detection Principle | Resistive Pulse Sensing (RPS) |
| Sample Volume | 30–50 µL |
| Particle Concentration Range | 1×10⁶–1×10¹² particles/mL |
| Zeta Potential Range | −200 to +200 mV |
| Measurement Time | 5–10 min |
| Software Compliance | FDA 21 CFR Part 11, Audit Trail Enabled |
| Dimensions | 27 × 16.5 × 19 cm |
| Weight | 8 kg |
| Brand | RION |
|---|---|
| Origin | Japan |
| Model | KE40B |
| Measurement Principle | Laser Light Scattering (830 nm Diode Laser, Class 1 per IEC 60825-1) |
| Detection Range | 0.15–0.5 µm (factory-configured 4-channel: 0.15 / 0.2 / 0.3 / 0.5 µm |
| Detection Efficiency | 50 ± 10% at 0.15 µm |
| Sample Flow Rate | 10 mL/min |
| Maximum Particle Concentration | 1,200 particles/mL (±5% accuracy for 0.15 µm particles) |
| Sample Pressure Limit | ≤300 kPa (gauge) |
| Wetted Materials | Quartz, PFA |
| Calibration Standard | PSL spheres (1.6 µm nominal) |
| Display Interface | Integrated resistive touch screen |
| Data Output | Built-in thermal printer + SD memory card storage |
| Communication | Direct interface with KE-40B1 controller (no external PC required) |
| Power Supply | DC 12 V (supplied by KE-40B1) |
| Operating Environment | 15–30 °C, ≤85% RH (non-condensing) |
| Dimensions (H×W×D) | 160 × 300 × 251 mm (excl. protrusions) |
| Weight | ~7.5 kg |
| Origin | Spain |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | RP10 |
| Pricing | Upon Request |
| Origin | Spain |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | RP20 |
| Price | Upon Request |
| Brand | Yetuo |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | CFJ-II |
| Principle | Vibration-based Sieving |
| Sieve Rotation Speed | 200 ± 5 rpm |
| Oscillation Amplitude | 60 mm |
| Counting Accuracy | ±0.5 revolutions (N = preset count) |
| Power Supply | 220 ± 10% V, 50 Hz |
| Power Consumption | 60 W |
| Dimensions (L×W×H) | 446 × 361 × 360 mm |
| Net Weight | 25 kg |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | DIA-10 |
| Instrument Type | Dynamic |
| Number of Lenses | 1 |
| Measurement Range | 5–100 µm |
| Dispersion Method | Wet Dispersion |
| Measured Parameters | Area-equivalent Diameter, Perimeter-equivalent Diameter, Maximum Length, Maximum Orthogonal Length, Feret Diameter (Vertical), Feret Diameter (Horizontal), Particle Perimeter, Convex Hull Perimeter, Circularity, Aspect Ratio, Bounding Rectangle Aspect Ratio |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | SALD-2300 |
| Price Range | USD 27,000–41,000 (approx.) |
| Dispersion Method | Dry & Wet |
| Measurement Range | 0.017–2500 µm |
| Repeatability | <1% RSD |
| Measurement Time | 10–15 s per analysis |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | ASM200 |
| Measurement Range | 20 µm – 25 mm |
| Sieve Stages | 9 |
| Vibration Frequency | 3000 min⁻¹ |
| Adjustable Amplitude | 0–2.5 mm |
| Timing Range | 1–99 min |
| Sieve Diameter Options | 100 mm, 150 mm, 200 mm, 203 mm (8") |
| Sieving Principle | Three-dimensional throw motion |
| Compliance | ISO 3310-1, DIN EN 10204.21, ASTM E11 |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | ASM400 |
| Measurement Range | 63 µm – 90 mm |
| Sieve Stages | 11 |
| Vibration Frequency | 3000 min⁻¹ |
| Max Amplitude | 3 mm |
| Timer Range | 1–99 min |
| Sieve Diameter Options | 100 mm, 150 mm, 200 mm, 203 mm (8"), 400 mm |
| Sieving Principle | High-Efficiency 3D Throwing Motion |
| Compliance | ISO 3310-1, DIN EN 10204.21, ASTM E11 |
| Dimensions (L×W×H) | 51 cm × 60 cm × 140 cm |
| Construction | Corrosion-Resistant Powder-Coated Steel Frame, Transparent Polycarbonate Lid |
| Sieve Material Options | Stainless Steel, Brass, Polymer, Wood |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | GAS500 |
| Sieve Diameter | 500 mm |
| Sieve Area | 500 × 500 mm |
| Screening Range | 200 µm – 120 mm |
| Number of Sieve Levels | 9 |
| Rotational Speed | 1000 min⁻¹ |
| Power Supply Frequency Compatibility | 50 Hz |
| Compliance | DIN ISO 2591-1, ISO 9276-2, ASTM E11 |
| Drive Type | Horizontal Circular Vibration |
| Control Interface | Digital Display & Keypad (Time, Amplitude, Rotation Direction, Speed) |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | KM65 / KM170 |
| Maximum Feed Size | <25 mm |
| Final Particle Size Range | 2–10 mm (adjustable) |
| Throughput | KM65: 60 kg/h |
| KM170 | 200 kg/h |
| Rotor Speed | 158 rpm |
| Motor Power | 1.5 kW, 3-phase |
| Grinding Element Material | Tungsten Carbide |
| Sample Division Ratios | 1:2, 1:4, 1:8 |
| Compliance | CE-certified |
| Operating Mode | Grinding-only or Integrated Grinding + Division |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | LAVIB300 |
| Sieve Motion Type | Horizontal circular (regular or irregular) |
| Irregular Motion Amplitude Range | 0–30 mm |
| Frequency | 270 cycles/min |
| Sieving Time Range | 1–99 min |
| Max Sieve Diameter | 300 mm |
| Standard Sieve Sizes | 200 mm, 210 mm, 300 mm (8″ / 214 mm) |
| Sieve Standards Compliance | ISO 3310-1, DIN EN 10204.21, ASTM E11 |
| Particle Size Range | 20 µm – 125 mm |
| Number of Sieve Stages | 8 |
| Display | LCD digital timer and control interface |
| Construction | Wear-resistant metal frame with corrosion-resistant epoxy coating |
| Optional Sieve Materials | Polished stainless steel, brass, polymer |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | LAVIB300 |
| Measurement Range | 20 µm – 40 mm |
| Sieve Stages | 8 |
| Max Sample Mass | 6 kg |
| Vibration Frequency | 270 min⁻¹ (4.5 Hz) |
| Sieving Time | 1–99 min |
| Sieve Diameter Options | 100 mm, 150 mm, 200 mm, 203 mm, 305 mm |
| Drive Supply Frequency | 50 Hz |
| Compliance | DIN ISO 2591-1, ISO 9276-1, ASTM E11 |
| Display | Digital control panel for time, amplitude, rotation direction, and speed |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | SLS 200 |
| Particle Size Range | 20 µm – 4,000 µm |
| Sample Capacity | 1–100 g per run |
| Sieve Diameter | 200 mm |
| Sieving Time Setting | 1–99 min (digital LCD) |
| Vacuum Control | Adjustable, digitally displayed |
| Dimensions (W×H×D) | 326 mm × 270 mm × 425 mm |
| Compliance | ISO 3310-1, ASTM E11, DIN EN 10204.21 |
| Construction | Stainless steel housing, polished stainless steel sieves (optional copper or nylon meshes) |
| Optional Accessories | Anti-static module, sample pre-heater |
| Brand | SOTAX |
|---|---|
| Origin | Switzerland |
| Model | PF1 |
| Measurable Parameter | Angle of Repose |
| Compliance | USP <1174>, Ph. Eur. 2.9.36 |
| Test Principle | Orifice Flow (Funnel-Flow) Method |
| Weight | 20 kg |
| Brand | Spectro Scientific |
|---|---|
| Origin | USA |
| Instrument Type | Optical Particle Counter with Direct Imaging & Ferrous Quantification |
| Technology | LaserNet Fines® |
| Compliance | ASTM D7596 |
| Measurement Principle | High-Resolution Laser Imaging + Integrated Ferromagnetic Sensor Array |
| Sample Throughput | One oil sample — full analysis in ≤ 4 minutes |
| Output Parameters | ISO 4406 & NAS 1638 cleanliness codes, particle count per size bin (≥4 µm(c), ≥6 µm(c), ≥14 µm(c), ≥21 µm(c), ≥38 µm(c), ≥70 µm(c)), ferrous concentration (ppm), ferrous particle count & size distribution (≥25 µm), automated wear debris classification (cutting, sliding, fatigue, non-metallic, fiber, water, air bubble) |
| Brand | SYMPATEC |
|---|---|
| Origin | Germany |
| Manufacturer | SYMPATEC GmbH |
| Product Type | Imported |
| Model | QICPIC & MIXCEL |
| Instrument Category | Dynamic Image-Based Particle Analyzer |
| Number of Lenses | 6 |
| Measurement Range | 1–3000 µm |
| Dispersion Method | Wet Dispersion |
| Camera Resolution | 4.2 MP |
| Measured Parameters | Chord Length, Feret Diameter (max/min/mean), Fiber Length, Fiber Diameter, Equivalent Circular Diameter, Sphericity, Aspect Ratio, Convexity, Straightness, Elongation, Perimeter Equivalent Diameter (PED), LEFI, DIFI, VBFD |
| Origin | Germany |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | Optical Microscope |
| Price Range | USD 92,000 – 132,000 |
| Brand | Tianhe |
|---|---|
| Origin | Tianjin, China |
| Model | BM-2A |
| Instrument Type | Optical Surface Particle Counter |
| Measurement Range | 0.1–5 µm, 0.3–10 µm, 5–150 µm, 20–500 µm |
| Number of Channels | 8 |
| Channel Resolution | 0.1 µm |
| Sampling Area | 10 cm² (configurable) |
| Sampling Duration | 5–59 s (user-defined) |
| Accuracy | ≤ ±20% |
| Relative Standard Deviation (RSD) | ≤ 5% |
| Counting Capacity | 0–9,999,999 particles |
| Reporting Units | cm², m², sq.in, sq.ft |
| Operating Temperature | 10–40 °C |
| Power Supply | AC 220 V ±10%, 50 Hz, ≤100 W |
| Sampling Flow Rate | 1.0 CFM (28.3 L/min) |
| Interface | RS232, USB port for U-disk storage |
| Display & Control | Color touchscreen with bilingual (English/Chinese) UI |
| Data Output | Built-in thermal printer, automatic local storage, PC connectivity |
| Brand | Tianhe |
|---|---|
| Origin | Tianjin, China |
| Model | BM-A |
| Instrument Type | Optical Surface Particle Counter |
| Measurement Range | 0.1–5 µm, 0.3–10 µm, 5–150 µm, 20–500 µm |
| Number of Channels | 8 |
| Channel Resolution | 0.1 µm |
| Sampling Area | 10 cm² (configurable) |
| Sampling Duration | 5–59 s (user-defined) |
| Accuracy | ≤ ±20% |
| Relative Standard Deviation (RSD) | ≤ 5% |
| Count Capacity | 0–9,999,999 particles |
| Reporting Units | cm², m², sq.in, sq.ft |
| Operating Temperature | 10–40 °C |
| Power Supply | AC 220 V ±10%, 50 Hz, ≤100 W |
| Sampling Flow Rate | 1.0 CFM (28.3 L/min) |
| Interface | RS232, USB port for U-disk storage |
| Display & Control | Color capacitive touchscreen |
| Data Output | Built-in thermal printer, auto-storage, GLP-compliant audit trail (timestamped, user-ID logged) |
| Brand | Tianhe |
|---|---|
| Origin | Tianjin, China |
| Instrument Type | Optical Surface Particle Counter |
| Measurement Principle | Laser Light Scattering & Obscuration |
| Detection Range | 5–150 µm |
| Number of Size Channels | 8 |
| Channel Resolution | 0.1 µm |
| Sampling Area | 10 cm² |
| Adjustable Sampling Duration | 5–59 s |
| Accuracy | ±20 % |
| Repeatability (RSD) | <5 % |
| Particle Count Capacity | 0–9,999,999 |
| Display Units | cm², m², sq.in, sq.ft |
| Operating Temperature | 10–40 °C |
| Power Supply | AC 220 V ±10 %, 50 Hz, ≤100 W |
| Interface | RS232, USB (U-disk storage) |
| Data Security | Role-based User Management System |
| Calibration | Internal Reference Curve with Auto-Fit Algorithm |
| Compliance Support | ASTM F3212 (Standard Guide for Evaluating Particulate Contamination on Medical Device Packaging), ISO 11140 (Sterilization – Qualification of Process Indicators), GB/T 24334–2009 (Determination of Dust Specks on Paper and Paperboard) |
| Brand | Tianhe |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (China) |
| Model | GWF-9D |
| Instrument Type | Optical Particle Counter |
| Price | Upon Request |
| Key Specifications | Particle Size Range: 1–500 µm |
| Counting Channels | 64 displayed (customizable up to thousands, resolution 0.01 µm) |
| Sample Volume | 0.2–6500 mL (±0.5% accuracy) |
| Flow Rate | 5–80 mL/min |
| Counting Accuracy | ±5% of specified value |
| Channel Resolution | >95% |
| RSD | <1.5% (for standard particles ≥1000 particles/mL) |
| Max Detection Concentration | 18,000 particles/mL |
| Sample Capacity | 1–20 vials |
| Stirring Speed | 0–1000 rpm (step-adjustable) |
| Operating Temperature | 10–40 °C |
| Power | 100–240 VAC, 50/60 Hz, <80 W |
| Data Output | Dot-matrix printer, RS232, USB storage |
| Brand | Tianhe |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | GWF-9D Series |
| Pricing | Upon Request |
| Instrument Type | Optical Particle Counter |