Physical Property Testing Instruments
Filter
Showing 8011–8040 of 12141 results
| Brand | Panasonic |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model | MPR-162DCN-PC |
| Price Range | USD 2,800 – 7,000 |
| Temperature Range | 2°C to 14°C (ambient: −5°C to 35°C) |
| Effective Volume | 158 L |
| External Dimensions (W×D×H) | 800 × 450(532) × 1090 mm |
| Internal Dimensions (W×D×H) | 720 × 300 × 725 mm |
| Net Weight | 67 kg |
| Rated Power Consumption | 173 W |
| Exterior Material | Powder-Coated Steel |
| Interior Material | Stainless Steel |
| Door | Single-section double-glazed door with heat-reflective film |
| Compressor | Hermetic reciprocating type (90 W output) |
| Refrigerant | R134a (ozone-friendly) |
| Safety Features | High/low temperature alarm, door-open alert (>30 s), over-temperature cutoff (−2°C / 20°C), thermal runaway prevention |
| Standard Accessories | 1 interior LED lamp, 2 adjustable stainless-steel wire shelves, 1 key set, 1 MTR-0621LH monitoring cable |
| Compliance | Designed per IEC 61000-6-3 (EMC), ISO 13485-aligned manufacturing practices, supports GLP/GMP traceability via optional data logger integration |
| Brand | Panco |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | TEGeta |
| Measurement Principle | Steady-State Heat Flow Method (Thermal Gradient + Simultaneous Electrical & Thermal Response) |
| Typical Sample Area | 50 mm × 50 mm |
| Customizable Sample Area | up to 80 mm × 80 mm |
| Temperature Range | Up to 900 °C |
| Voltage Range | 0–60 V (±1% accuracy) |
| Current Range | 0–30 A (±2% accuracy) |
| Heating Power | Up to 800 W (±10% tolerance) |
| Measured Parameters | Thermal Flux, Average Seebeck Coefficient (µV/K), Average Thermal Conductivity (W/m·K), Average Electrical Resistivity (µΩ·m), Maximum Output Power (mW/cm²), Conversion Efficiency (%) |
| Repeatability | High |
| Accuracy Class | High-Precision Laboratory Grade |
| Compliance Context | Designed for ASTM E1530, ISO 22007-2, and GB/T 33792–2017 compliant workflows |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 1,350 (FOB) |
| Drive System | Taiwan-made AC Frequency-Controlled Motor |
| Actuation | Precision Ball Screw Vertical Movement |
| Load Cell | U.S.-Sourced Explosion-Proof Load Cell (±0.5% FS accuracy) |
| Control System | Embedded Microprocessor-Based Controller with Real-Time Data Acquisition |
| Output | Thermal Printer Integrated |
| Safety | Automatic Emergency Stop upon Crush Detection |
| Compliance | Meets ASTM D642, ISO 12048, and TAPPI T804 requirements |
| Brand | TLS |
|---|---|
| Origin | Spain |
| Model | T-2911 |
| Type | Import |
| Distributor Type | Authorized General Distributor |
| Pricing | Available Upon Request |
| Brand | Paratronix |
|---|---|
| Model | ETA-01 |
| Force Sensor Range | 0.5–25 kg (selectable) |
| Force Resolution | 0.0001–0.001 g |
| Displacement Resolution | 0.0001 mm |
| Stroke Range | 0–310 mm |
| Test Speed | 0.001–45 mm/s |
| Data Acquisition Rate | Up to 4,000 Hz |
| Compliance | GB/T 28304-2012, GB/T 6783-2013, ASTM D1894-90, AACC 16-50 & 74-09, SC/T 3702-2014, NY/T 1180-2006, AFERA 4013/4015/5001/5004, FINAT Method 3/5/6/9/18/22 |
| Brand | Paratronix |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GPT-01 |
| Max Test Pressure | 6.00 MPa |
| Pressure Ramp Rate | 0.4 MPa/s ± 0.1 MPa/s |
| Pressure Range | 0.50–6.00 MPa |
| Pressure Resolution | 0.01 MPa |
| Pressure Accuracy | < ±1.5% F.S. |
| Ramp Rate Accuracy | < ±5% |
| Cycle Time (to 1.60 MPa) | ~4 s |
| Throughput | 5–10 bottles/min |
| Bottle Neck Diameter Compatibility | Φ24–29 mm (customizable) |
| Operating Temp | 0–40 °C |
| RH Limit | < 95% |
| Power Supply | 220 VAC ±5%, grounded |
| External Air Supply Required | 0–0.8 MPa |
| Safety Enclosure | Integrated tempered safety glass |
| Brand | Paratronix |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | PMT-100N |
| Max Test Force | 50 N |
| Loading Speed Range | 0.1–200 mm/min (infinitely variable) |
| Force Resolution | 0.01 N |
| Rigidity Measurement Range | 100 N |
| Rigidity Accuracy | ±0.3% F.S. |
| Deflection Resolution | 0.01 mm |
| Support Span Adjustment | 1–60 mm |
| Flexibility Test Frequency | 0.1–1.0 Hz |
| Bend Angle Range | 1–30° |
| Bend Angle Accuracy | ±0.1° |
| Bend Cycle Count | 1–999 cycles |
| Bend Gauge Length | 5–100 mm |
| Gauge Length Accuracy | ±0.1 mm |
| Effective Stroke | 150 mm |
| Power Supply | 220 V, 50 Hz |
| Dimensions (L×W×H) | 420 × 350 × 620 mm |
| Weight | ~30 kg |
| Brand | Paratronix |
|---|---|
| Model | PMT-100N |
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Maximum Test Force | 50 N |
| Load Speed Range | 0.1–200 mm/min (infinitely variable) |
| Force Resolution | 0.01 N |
| Force Accuracy | ±0.3% FS |
| Deflection Resolution | 0.01 mm |
| Deflection Accuracy | ±0.01 mm |
| Support Span Adjustment Range | 1–60 mm |
| Bending Angle Range | 1–30° |
| Angular Accuracy | ±0.1° |
| Bend Cycle Count | 1–999 cycles |
| Bend Frequency | 0.1–1.0 Hz |
| Bending Gauge Length | 5–100 mm |
| Gauge Length Accuracy | ±0.1 mm |
| Specimen Diameter Range | 0.2–3.4 mm |
| Effective Stroke | 150 mm |
| Power Supply | 220 V, 50 Hz |
| Dimensions (L×W×H) | 420 × 350 × 620 mm |
| Weight | ~30 kg |
| Brand | Paratronix |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | PMT-100N |
| Max Test Force | 50 N |
| Loading Speed Range | 0.1–200 mm/min (infinitely variable) |
| Force Resolution | 0.01 N |
| Bending Angle Range | 1–30° |
| Bending Frequency | 0.1–1.0 Hz |
| Span Adjustment Range | 5–100 mm |
| Span Accuracy | ±0.1 mm |
| Wall Thickness Modes | Standard / Thin / Ultra-Thin Wall Selection |
| Power Supply | 220 V, 50 Hz |
| Dimensions (L×W×H) | 420 × 350 × 620 mm |
| Weight | ~30 kg |
| Brand | Parker |
|---|---|
| Origin | United Kingdom |
| Model | LCM20 |
| Calibration Standards | ACFTD & MTD |
| Channel Count | 6 |
| Detection Principle | Single-Point Source Laser (SPSL) Light Scattering |
| Display | Integrated LCD Handheld Unit |
| Data Storage | 300 Test Records |
| Pressure Rating | Up to 420 bar |
| Flow Compatibility | Up to 400 L/min (with system integration) |
| Communication | RS232 @ 9600 baud |
| Compliance | ISO 4406, ISO 11171, NAS 1638, ASTM D6786 |
| Software | DAT μm Trend Analysis Suite (free firmware updates included) |
| Optional Accessories | Barcode Scanner, Built-in Thermal Printer, Relay Output for External Equipment Control |
| Service | Annual calibration support via Parker Authorized Service Centers |
| Brand | Parr |
|---|---|
| Origin | USA |
| Model | 6200 |
| Measurement Mode | Isoperibol |
| Temperature Range | 0–40 °C |
| Temperature Resolution | 0.0001 °C |
| Precision | ±0.1% RSD |
| Single-Sample Test Time | 6–7 min |
| Heat Capacity | 33,000 J |
| Outer Water Jacket Volume | 2 L |
| Inner Water Bucket Volume | 342 mL |
| Oxygen Bomb Pressure Rating | 200 atm |
| Bomb Volume | 342 mL |
| Data Storage Capacity | 1000 tests |
| Interface Options | RS-232, USB, Ethernet, Balance Integration, Printer Port |
| Operating System | Linux-based embedded controller |
| Calibration & Reporting | Automatic correction for fuse wire, nitric acid formation, sulfur oxidation, and hydrogen combustion enthalpy |
| Brand | Parr |
|---|---|
| Origin | USA |
| Model | 6400 |
| Temperature Range | 0–40 °C |
| Temperature Resolution | 0.0001 °C |
| Precision | ±0.1% RSD |
| Single-Sample Test Time | 6–7 min |
| Heat Capacity | 33,000 J/K |
| Outer Water Jacket Volume | 2 L |
| Inner Water Bucket Volume | 342 mL |
| Oxygen Filling | Fully Automated |
| Jacket Water Filling | Fully Automated |
| Pressure Release | Automated |
| Bomb Rinsing | Automated |
| Data Storage Capacity | 1,000 tests |
| Connectivity | Ethernet |
| Display | Touchscreen LCD |
| Measurement Principle | Isoperibol (Constant-Temperature Jacket) |
| Key | Brand: PULUODY |
|---|---|
| Model | PS-8011 |
| Material | High-purity borosilicate glass |
| Volume | 220 mL / 250 mL (standard) |
| Cleanliness Grade | NAS 00–4 |
| RCL | ≤15 particles/100 mL |
| AOQL | 0.5% |
| Temperature Resistance | up to 150 °C |
| Pressure Rating | 0.1 MPa |
| Compliance | ISO 3722, ISO 4406, NAS 1638, ISO 16232, GJB 420A/B, GB/T 14039, GB/T 17484, SAE AS749D, DL/T 427, DL/T 1096 |
| Sterilization Method | Ultrasonic cleaning + Class 100,000 cleanroom air shower + nitrogen-purged sealing |
| Cap Type | Leak-proof external-thread cap with O-ring seal |
| Cap Color Options | Blue, Orange-Yellow, Pink |
| Manufacturing | Fully automated production line |
| Brand | Particle Metrix |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ZetaView® Evolution |
| Zeta Potential Range | ±500 mV |
| pH Range | 1–13 |
| Operating Temperature Range | 5°C to 55°C |
| pH Resolution | 1–13 |
| Temperature Resolution | 0.1°C |
| Size Accuracy | ±5 nm |
| Size Repeatability | ±2 nm |
| Brand | LaVision GmbH |
|---|---|
| Origin | Germany |
| Model | ParticleMaster inspex |
| Dispersion Method | Dry & Wet |
| Measurement Range | >5 µm |
| Repeatability | <1% |
| Measurement Time | 30–60 s |
| Compliance | IP54 |
| Light Source | LED (Eye-Safe) |
| Calibration | Factory-Preconfigured Particle Size & Depth-of-Field Calibration |
| Installation | Fixed-Mount Integrated Probe with Coaxial Illumination |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | XDV-SDD |
| Price Range | USD 27,000 – 68,000 |
| Brand | OEM / Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 125°C |
| Humidity Range | 100% RH (Saturated Steam) |
| Temperature Display Resolution | 0.1°C |
| Temperature Control Accuracy | ≤ ±0.5°C (at saturated steam condition) |
| Temperature Uniformity | ±0.5°C |
| Humidity Stability | ±1% RH |
| Pressure Range | 0–2.5 kgf/cm² (Vessel Design Pressure: 3.5 kgf/cm²) |
| Pressure Fluctuation | ±0.02 kgf/cm² |
| Test Duration | 000–999 hours |
| Pressurization Time | ≤45 min to reach 1.04 kgf/cm² |
| Standard Test Condition | 121°C, 100% RH, 1.04 kgf/cm² |
| Internal Chamber Dimensions | Φ240 × 440 mm (Vertical Cylindrical) |
| Control System | Microprocessor-Based Controller with LED Display |
| Steam Circulation | Natural Convection |
| Compliance | GB/T 2423.1–1989, GB/T 2423.2–1989, GB/T 2423.3–1993 |
| Auto Water Replenishment | Yes (Enables Uninterrupted Long-Term Testing) |
| Brand | Zhengye |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | PCW-3000 |
| Pricing | Upon Request |
| Brand | PCS Instruments |
|---|---|
| Origin | United Kingdom |
| Model | HPR |
| Instrument Type | Reciprocating Tribological Tester |
| Maximum Friction Force | 1–10 N |
| Temperature Range | Ambient to 130 °C |
| Load Range | 1–10 N |
| Contact Pressure | 0–1.4 GPa |
| Frequency Range | 10–200 Hz |
| Stroke Length | 20 µm–1.8 mm |
| Chamber Pressure Range | 10⁻⁵ torr to 10 bar |
| Sample Volume Capacity | 15 mL |
| Chamber Design | Fully Sealed, Removable & Pressure/Vacuum-Retentive |
| Brand | PCS Instruments |
|---|---|
| Origin | United Kingdom |
| Model | MTM-EC |
| Instrument Type | Multi-Functional Tribological Tester |
| Maximum Friction Force | 75 N |
| Temperature Range | Ambient to 150 °C |
| Contact Pressure Range | 0–1.25 GPa (standard), up to 3.1 GPa (optional) |
| Sliding Speed | −4 to +4 m/s |
| Electrochemical Potential Range | ±60 V (high range), ±10 V (low range) |
| Current Range | 0–3.5 A (high), 0–200 mA (low) |
| Measurement Noise | ±120 mV / ±20 mA (high), ±20 mV / ±0.4 mA (low) |
| Sample Volume | 30 mL (10 mL with optional filler kit) |
| Dimensions (H×W×D) | 400 × 400 × 600 mm |
| Weight | 30 kg |
| Measurement Principle | Mie Scattering Theory (Full-Range) |
|---|---|
| Particle Size Range | 0.1–450 µm (Lab Mode) |
| Detection Channels | 70 Main + 24 Side Array (Lab), 15 User-Configurable Channels (Online) |
| Laser Source | Semiconductor Diode, 760 nm, 5 mW, >20,000 h Lifetime |
| Sample Flow Rate | 70 mL/min (Online) |
| Operating Temperature | 10–50 °C |
| Max Pressure | 100 psi (0.675 MPa) |
| Power Supply | 85–250 VAC, 50–60 Hz |
| Communication Interface | RS-485 |
| Compliance | ISO 13320, NIST-Traceable Calibration |
| Enclosure Materials | Teflon®, Stainless Steel, Borosilicate Glass, BUNA-N |
| Dimensions (Online Unit) | 320 × 110 × 110 mm |
| Weight (Online Unit) | 3 kg |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 4,100 (FOB) |
| Chamber Dimensions | Ø300 mm × L500 mm |
| Inner Tank Material | SUS316 Stainless Steel (3 mm thick) |
| Outer Casing Material | SUS316 Stainless Steel (1 mm thick) |
| Insulation | Rockwool + Rigid Polyurethane Foam |
| Steam Generator | Finned-Tube Seamless Stainless Steel Heater with Platinum Coating |
| Temperature Sensor | PT-100 Platinum RTD |
| Control System | Microprocessor-Based PID Controller with LED Display |
| Pressure Gauge | Analog Pointer-Type |
| Max Operating Pressure | 2.65 kg/cm² (37.7 psi) at 140°C |
| Safety Features | Dual-Stage Pressure Relief, Water-Level Sensor Protection, Emergency Manual Vent Valve, Cold-Air Purge Function |
| Continuous Operation Duration | Up to 400 Hours Without Refill |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 4,050 (approx. ¥29,000) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,200 (FOB) |
| Temperature Range | 110 °C / 132 °C (saturated steam) |
| Humidity Range | 100 % RH (saturated) |
| Pressure Range | 0.5–2.0 kgf/cm² (max safety capacity: 3.5 kgf/cm²) |
| Time Setting Range | 0–999 h |
| Temperature Uniformity | ±2.0 °C |
| Temperature Ramp Rate | RT to 132 °C in ≤35 min |
| Pressure Ramp Rate | 0 to 2.0 kgf/cm² in ≤40 min |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Operating Ambient | ≤30 °C, well-ventilated |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,100 (approx.) |
| Temperature Range | 110°C / 132°C (saturated steam) |
| Humidity Range | 100% RH |
| Pressure Range | 0.5–2.0 kg/cm² (max safety capacity: 3.5 kg/cm²) |
| Test Duration | 0–999 hours |
| Temperature Uniformity | ±2.0°C |
| Temperature Control Accuracy | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Ramp Time to 132°C | ≤35 min |
| Pressure Ramp Time to 2.0 kg/cm² | ≤40 min |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 4,100 (FOB) |
| Compliance | GB/T 10586–1989, GB/T 2423.3–1993 (IEC 60068-2-3), MIL-STD-810D Method 502.2, GJB 150.9–1986, GB/T 2423.34–1986, MIL-STD-883C Method 1004.2 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,100 (approx.) |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 4,100 (FOB) |
| Internal Dimensions (Φ×H) | Φ250×300 mm to Φ650×600 mm |
| Operating Temperature Range | 105–135 °C (143 °C optional) |
| Relative Humidity Range | 70–100 % RH |
| Pressure Range | 0–2.0 kg/cm² (gauge), up to 3.0 kg/cm² on request |
| Safety Features | Water-level sensor, overpressure relief valve, auto-locking door with pressure interlock, P.I.D. saturated steam temperature control |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 100–132 °C |
| Humidity Condition | 100 % RH Saturated Steam |
| Pressure Range | 0–4 kg/cm² (gauge) above atmospheric pressure |
| Internal Chamber Dimensions (Multiple Models) | Φ25×40 cm, Φ30×50 cm, Φ40×60 cm, Φ50×70 cm |
| Temperature Control Accuracy | ±0.1 °C (PID) |
| Safety Features | Dual Overheat Protection, Interlocked Door Switch, Mechanical Safety Valve, Auto Water Replenishment, Condensate Purge System, Heat-Resistant ABS Door Guard, Integrated Silicone Door Gasket |