Pumps
Filter
Showing 391–420 of 1032 results
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-2921 |
| Flow Rate | 0.3–18 mL/min |
| Speed Range | 100–6000 rpm |
| Precision (CV) | <1% |
| Displacement | 3 µL |
| Minimum Dose | 0.5 µL |
| Max Differential Pressure | 3 bar |
| Inlet Pressure Limit | 1 bar |
| Operating Temperature | −20 to +60 °C |
| Weight | ~56 g |
| Motor | Brushed DC, 18 V, Hall-effect encoder (16 pulses/rev) |
| Communication | RS-232, CANopen (DSP 301/DSP 402) |
| Wetted Materials | SS 316L, ceramic, tungsten carbide, nickel-based alloy, epoxy |
| Shaft Seal | graphite-reinforced PTFE/SS 316L |
| Static Seals | FPM (optional EPDM/FFPM) |
| Tubing Connection | 2 mm OD slip-fit (optional manifold M2.1) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | mzr-2921 |
| Drive Type | Electric |
| Flow Range | 1 µL/h to 1 L/min |
| Accuracy | ±1% of set volume |
| Flush Rate | 40 mL/min |
| Application Pressure Class | Low-pressure (≤ 2 bar) |
| Fluid Compatibility | Low-viscosity liquids (e.g., deionized water, aqueous solutions, methanol, organic solvents, oils, lubricants) |
| Pump Type | Micro gear metering pump |
| Dimensions | Compact, OEM-integrated design |
| Compliance | CE, RoHS, ISO 9001-manufactured |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-4605 |
| Flow Rate Range | 0.012–72 mL/min |
| Viscosity Range | 0.3–50,000 mPa·s |
| Precision (CV) | <1% |
| Speed Range | 1–6000 rpm |
| Displacement per Revolution | 12 µL |
| Minimum Dose Volume | 2 µL |
| Pressure Differential | 0–10 bar (water, 1 mPa·s), up to 50 bar (oil, 16 mPa·s) |
| Max. Inlet Pressure | 5 bar (10–40 bar with optional configuration) |
| Fluid Path Materials | SS 316L (1.4404 / 1.4435), tungsten carbide, Ni-based alloys |
| Seals | Graphite-reinforced PTFE, FPM (standard), EPDM/FFPM (optional) |
| Motor | 24 V DC servo motor, 44 W |
| Controller | Integrated 16-bit microcontroller |
| Interfaces | 0–10 V analog, RS-232, 1 digital I/O |
| Dimensions (L×W×H) | 143 × 45 × 65 mm |
| Weight | ~800 g |
| Operating Temperature | −5 to +60 °C (−20 to +150 °C with optional configuration) |
| Connection | Frontal 1/4″–28 UNF |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | mzr-4605 |
| Drive Type | Electric |
| Speed Range | 0–300 rpm |
| Flow Rate | 1 µL/h – 1.1 L/h |
| Dimensions (L) | 143 mm |
| Viscosity Range | Compatible with methanol, water, solvents, adhesives, oils, gels |
| Technology | Rotating micro annular gear |
| Pulse Dampening | Low-pulsation delivery |
| Shear Stress | Low-shear transport |
| Optional Modules | Thermal insulation kit, fluid-sealed air/moisture barrier, electric heating module (up to 150 °C), dual-shell temperature control (–20 °C to +150 °C), torque reducer, mzr-S05/S05E control console |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-4609 Ex |
| Flow Rate | 0.012–56 mL/min |
| Speed Range | 1–4700 rpm |
| Viscosity Range | 0.3–5,000 mPa·s |
| Precision (CV) | <1% |
| Max Differential Pressure | 0–10 bar (≥16 mPa·s) |
| Inlet Pressure Max | 5 bar (10 bar with optional fluid seal module) |
| Displacement per Revolution | 12 µL |
| Minimum Dose Volume | 2 µL |
| Motor | 24 V DC, 53 W, encoder resolution 500 pulses/rev |
| Wetted Materials | SS 316L (1.4404/1.4435), tungsten carbide, Ni-based alloys |
| Shaft Seal | graphite-reinforced PTFE + SS 316L |
| Static Seals | FPM (standard), EPDM/FFPM optional |
| Enclosure Rating | ATEX II 2G c T5 X |
| Operating Temperature | −5 to +40 °C |
| Ambient Temperature | 0 to +40 °C |
| Weight | ~2700 g |
| Cable Length | 10 m |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Drive Type | Electric |
| Flow Range | 1 µL/h to 1 L/min |
| Pump Type | Positive Displacement Micro-Gear Pump |
| Compliance | CE, RoHS, ISO 9001 Certified |
| Construction | Chemically Resistant Stainless Steel & Ceramic Gears |
| Temperature Control | Integrated Heating Option (up to 120 °C) |
| Accuracy | ±1 % of set flow rate (typical, under calibrated conditions) |
| Repeatability | ≤0.5 % RSD |
| Viscosity Range | Up to 100,000 mPa·s |
| Materials Compatibility | Compatible with aqueous, organic, and highly viscous media including polymer melts and microencapsulation formulations |
| Brand | HNPM |
|---|---|
| Origin | UK |
| Model | MZR-6355 |
| Flow Rate | 0.024–144 mL/min |
| Speed Range | 1–6000 rpm |
| Precision | CV < 1% |
| Max Pressure | 80 bar |
| Displacement | 24 µL |
| Min Dose | 15 µL |
| Dimensions | 146 × 70 × 72 mm |
| Weight | ~1650 g |
| Operating Temp | −5 to +60 °C (−20 to +150 °C with optional thermal module) |
| Wetted Materials | Alloy C22 (DIN 2.4602), SSiC, Al₂O₃, ZrO₂, FFKM (Kalrez® 6375) |
| Motor | 24 V DC, 44 W, Brushless DC Servo with Encoder & Microcontroller |
| Interfaces | 0–10 V, 0(4)–20 mA, RS-232, 1x Digital I/O, Optional CAN Bus |
| Drive | 8-pole NdFeB Magnetic Coupling |
| Viscosity Range | 0.3–1000 mPa·s |
| Fluid Connection | 1/8" NPT Female |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Drive Type | Electric |
| Max. Speed | 6000 rpm |
| Flow Rate Range | 0–100 mL/min |
| Dimensions | Compact cylindrical design (typical for mzr-series: ~90 mm length, Ø16 mm) |
| Materials Options | ZrO₂ ceramic or tungsten carbide rotors |
| Compliance | Designed for GLP/GMP-adjacent lab environments |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | mzr-6355 |
| Drive Type | Electric DC Servo Motor (24 V DC, 44 W) |
| Speed Range | 1–6000 rpm |
| Flow Rate | 1 μL/h – 1.1 L/h (0.024–144 mL/min) |
| Pressure Rating | Up to 80 bar (1160 psi) |
| Precision | CV < 1% |
| Viscosity Range | 0.3–1000 mPa·s |
| Displacement Volume | 24 μL/rev |
| Minimum Dose | 15 μL |
| Wetted Materials | Alloy C22 (2.4602), SSiC, Al₂O₃, ZrO₂, FFKM (Kalrez® 6375) |
| Fluid Connections | 1/8" NPT internal thread |
| Dimensions (L×W×H) | 146 × 70 × 72 mm |
| Weight | ~1650 g |
| Operating Temperature | −5 to +60 °C (−20 to +150 °C with optional thermal module) |
| Torque Transmission | 8-pole NdFeB magnetic coupling |
| Interface Options | 0–10 V analog, 0(4)–20 mA, RS-232, 1 digital I/O, optional CAN bus |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-6359 Ex |
| Flow Rate | 0.024–112 mL/min |
| Speed Range | 1–4700 rpm |
| Max Differential Pressure | 0–40 bar (at η > 16 mPa·s) |
| Precision | CV < 1% |
| Motor | 24 V DC, 53 W, encoder 500 ppr |
| Explosion Protection | ATEX II 2G IIC c T4 X |
| Wetted Materials | Alloy C22 (DIN 2.4602), SSiC, Al₂O₃, ZrO₂, FFKM (Kalrez® 6375) |
| Connection | 1/8" NPT internal thread |
| Weight | ~4900 g |
| Dimensions | 280 mm (L) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-7205 |
| Flow Rate | 0.048–288 mL/min |
| Pressure Range | 0–30 bar (at 1 mPa·s), up to 40 bar (≥16 mPa·s) |
| Viscosity Range | 0.3–50,000 mPa·s (up to 1,000,000 mPa·s with optional configuration) |
| Precision | CV < 1% |
| Speed Range | 1–6000 rpm |
| Displacement | 48 µL |
| Minimum Dose | 30 µL |
| Wetted Materials | SS 316L, tungsten carbide, Ni-based alloy, graphite-reinforced PTFE, FPM (FKM) |
| Motor | 24 V DC servo motor, 44 W |
| Controller | Integrated 16-bit microcontroller |
| Interfaces | 0–10 V analog, RS-232, 1 digital I/O |
| Dimensions (L×W×H) | 155 × 50 × 69 mm |
| Weight | ~1080 g |
| Operating Temperature | −5 to +60 °C (−20 to +150 °C with optional configuration) |
| Inlet Pressure Max | 5 bar (10–40 bar with custom setup) |
| Fluid Connections | 1/8" NPT female (standard), lateral option available |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-7208 |
| Flow Rate | 0.048–288 mL/min |
| Precision (CV) | <1% |
| Viscosity Range | 0.3–50,000 mPa·s (up to 1,000,000 mPa·s with customization) |
| Speed Range | 1–6000 rpm |
| Max Differential Pressure | 30 bar (at 1 mPa·s), 150 bar (≥16 mPa·s) |
| Max Inlet Pressure | 5 bar (10–40 bar optional) |
| Displacement Volume | 48 µL |
| Minimum Dose | 30 µL |
| Wetted Materials | SS 316L, tungsten carbide, Ni-based alloys, graphite-reinforced PTFE, FPM/EPDM/FFPM seals |
| Motor | Brushless DC servo, 36 V DC, 201 W, IP54, 192 mNm continuous torque |
| Encoder | 500 pulses/rev (HEDL 5640) |
| Dimensions (L×W×H) | 211×84×93 mm |
| Weight | ~1500 g |
| Operating Temperature | −5 to +60 °C (−20 to +150 °C with optional configuration) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-7208X1 |
| Flow Rate | 0.048–288 mL/min |
| Viscosity Range | 0.3–50,000 mPa·s (up to 1,000,000 mPa·s with optional configuration) |
| Precision (CV) | <1% |
| Speed Range | 1–6000 rpm |
| Displacement | 48 µL |
| Minimum Dose | 30 µL |
| Pressure Differential | 0–30 bar (at 1 mPa·s), up to 120 bar (≥16 mPa·s) |
| Max. Inlet Pressure | 5 bar (10–40 bar optional) |
| Wetted Materials | SS 316L, tungsten carbide, Ni-based alloys |
| Shaft Seal | graphite-reinforced PTFE + SS 316L |
| Static Seals | FPM (standard), EPDM/FFPM optional |
| Motor | Brushless DC servo, 36 V DC, 201 W, IP54, 192 mNm continuous torque |
| Encoder | 1000 pulses/rev, analog Hall sensor |
| Dimensions (L×W×H) | 211 × 84 × 93 mm |
| Weight | ~1500 g |
| Operating Temperature | −5 to +60 °C (−20 to +150 °C with optional configuration) |
| Fluid Connections | 1/8" NPT internal thread (lateral option available) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-7209 Ex |
| Flow Rate | 0.048 – 225 mL/min |
| Speed Range | 1 – 4700 rpm |
| Precision (CV) | < 1 % |
| Viscosity Range | 0.3 – 5,000 mPa·s |
| Max Differential Pressure | 30 bar (at 1 mPa·s), 40 bar (≥16 mPa·s) |
| Max Inlet Pressure | 5 bar (10 bar with optional fluid seal module) |
| Displacement per Revolution | 48 µL |
| Minimum Dose Volume | 30 µL |
| Motor | 24 V DC, 2 A, 53 W, Encoder Resolution: 500 pulses/rev |
| Wetted Materials | SS 316L (1.4404 / 1.4435), Tungsten Carbide, Ni-based alloys |
| Shaft Seal | Graphite-reinforced PTFE + SS 316L |
| Static Seals | FPM (Viton), optional EPDM or FFPM |
| Enclosure Rating | ATEX II 2G c T4 X |
| Ambient Temp | 0 – 40 °C |
| Operating Temp | −5 – +40 °C |
| Weight | ~2700 g |
| Cable Length | 10 m |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-7255 |
| Flow Rate | 0.048–288 mL/min |
| Viscosity Range | 0.3–1,000 mPa·s |
| Precision | CV < 1% |
| Speed Range | 1–6,000 rpm |
| Max Pressure | 80 bar |
| Displacement | 48 µL |
| Minimum Dose | 30 µL |
| Wetted Materials | Alloy C22 (2.4602), SSiC, Al₂O₃, ZrO₂, FFKM (Kalrez® Spectrum™ 6375) |
| Motor | 24 V DC, 44 W DC Servo with Encoder & Microcontroller |
| Interface | 0–10 V, 0(4)–20 mA, RS-232, 1x Digital I/O, Optional CAN Bus |
| Dimensions (L×W×H) | 146 × 70 × 72 mm |
| Weight | ~1,650 g |
| Operating Temp | −5 to +60 °C (−20 to +100 °C with optional thermal control) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-7259 Ex |
| Explosion Protection | ATEX II 2G IIC c T4 X |
| Flow Rate | 0.048–225 mL/min |
| Precision (CV) | <1% |
| Viscosity Range | 0.3–100 mPa·s |
| Max Differential Pressure | 40 bar (at >16 mPa·s) |
| Max System Pressure | 80 bar |
| Displacement per Revolution | 48 µL |
| Minimum Dose | 30 µL |
| Motor | 24 V DC, 53 W, 500 PPR Encoder |
| Ambient Temp | 0–40 °C |
| Fluid Temp | −5–+60 °C (−20–+100 °C with optional thermal isolation module) |
| Wetted Materials | Alloy C22 (DIN 2.4602), SSiC, Al₂O₃, ZrO₂, FFKM (Kalrez® 6375) |
| Connection | 1/8" NPT internal thread |
| Weight | ~4900 g |
| Dimensions (L×W×H) | 280 × 120 × 140 mm |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | mzr-pump |
| Drive | Electric |
| Speed Range | 0–300 rpm |
| Flow Rate | 1 µL/h – 1.1 L/h |
| Pressure Capability | Up to 150 bar |
| Viscosity Range | 0.3 – 1,000,000 mPa·s |
| Pulse Level | <1% (RMS) |
| Dead Volume | <1 µL |
| Materials | Chemically resistant stainless steel, ceramic, PTFE, sapphire |
| Explosion-Proof Options | Available (ATEX/IECEx compliant) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Drive Type | Electric |
| Speed Range | 0–300 rpm |
| Flow Rate | 1 µL/h – 1.1 L/h |
| Materials | SiC bearings, Hastelloy C-22 (2.4602) housing, ZrO₂/Al₂O₃ or WC-Co rotors |
| Max Pressure | 150 bar |
| Viscosity Range | 0.3 – 1,000,000 mPa·s |
| Compliance | FDA-compliant wetted materials available, ATEX-certified variants (II 2G Ex db IIB T4 Gb / II 2D Ex tb IIIB T135°C Db) |
| Brand | HNPM |
|---|---|
| Origin | Germany |
| Model | MZR-4622 |
| Flow Rate | 1.2–72 mL/min |
| Speed Range | 100–6000 rpm |
| Precision (CV) | <1% |
| Displacement | 12 µL |
| Minimum Dose | 2 µL |
| Max. Differential Pressure | 5 bar |
| Inlet Pressure Limit | 1 bar |
| Operating Temperature | −20 to +60 °C |
| Wetted Materials | SS316L, Ceramic, Tungsten Carbide, Ni-based Alloy, Epoxy |
| Shaft Seal | Graphite-Reinforced PTFE |
| Static Seals | FPM (optional EPDM/FFPM) |
| Motor | Brushed DC, 24 V, 4.5 W, Hall-effect Encoder (32 ppr) |
| Dimensions | Ø16 mm × 88 mm |
| Weight | ~100 g |
| Fluid Connection | 2 mm OD sliding fitting (optional M2.1 manifold) |
| Brand | HUANKONG |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | GHK-1400B |
| Instrument Category | Other Vacuum Pumps |
| Product Type | Oil-Lubricated Rotary Vane Pump |
| Maximum Vacuum Level | > −96 kPa (absolute) |
| Flow Rate | 10 L/min (at atmospheric inlet) |
| External Dimensions | 130 × 100 × 220 mm |
| Weight | 2.3 kg |
| Power Source | Integrated Rechargeable Battery (Li-ion, nominal 12 V) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Oil-Free Diaphragm Pump |
| Ultimate Vacuum (without gas ballast) | 8 mbar |
| Ultimate Vacuum (with gas ballast) | 15 mbar |
| Pumping Speed | 1.7 m³/h (28.3 L/min) |
| Inlet/Outlet Port Diameter | 10 mm |
| Motor Power | 180 W |
| Dimensions (W × D × H) | 245 × 155 × 320 mm |
| Weight | 11.5 kg |
| Operating Temperature Range | 10–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Rating | IP54 |
| Noise Level at Low Vacuum | 65 dB(A) |
| Speed Range | 1380–1680 rpm |
| Rated Speed | 1380 rpm |
| Min. Input Pressure | 7 mbar |
| Max. Input Pressure | 1050 mbar |
| Gas Ballast Valve | Yes |
| Material of Gas-Contact Parts | PTFE or PTFE-composite |
| Compliance | DIN EN 60529, CE, RoHS |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Works GmbH & Co. KG |
| Type | Oil-Free Diaphragm Vacuum Pump |
| Pumping Speed | 1.32 m³/h (22 L/min) |
| Ultimate Vacuum | 2 mbar |
| Dimensions | 270 × 435 × 500 mm |
| Weight | 11.5 kg |
| Motor Power | 140 W |
| Pressure Sensor | Ceramic Al₂O₃, Range 1–1030 mbar, Accuracy ±1 mbar |
| Control Interface | TFT Display, Rotary Knob, RS232 & USB |
| Inlet/Outlet Port | 8 mm |
| IP Rating | IP20 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % RH |
| Noise Level | 54 dB(A) |
| Materials in Contact | PTFE, FPM, PPS, Al₂O₃ |
| Compliance | DIN EN 60529, CE, RoHS |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Type | Oil-Free Diaphragm Vacuum Pump |
| Model | VACSTAR digital |
| Pumping Speed | 1.32 m³/h (22 L/min) |
| Ultimate Vacuum | 2 mbar (without gas ballast) |
| Dimensions (W × D × H) | 150 × 375 × 370 mm |
| Weight | 11.5 kg |
| Motor Power | 130 W |
| Noise Level | 54 dB(A) at low vacuum |
| Speed Range | 285–1200 rpm |
| Inlet/Outlet Port Diameter | 8 mm |
| Enclosure Rating | IP20 |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Interface | RS232 and USB |
| Operating Temperature | 5–40 °C |
| Max. Relative Humidity | 80 % (non-condensing) |
| Materials in Contact | Al₂O₃, PTFE, FFKM (FFPM), PPS, NBR |
| Control Modes | Manual, Auto, %-based, Program |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Oil-Free Diaphragm Pump |
| Pumping Speed | 1 m³/h (16.67 L/min at 50/60 Hz) |
| Ultimate Pressure (without gas ballast) | 9 mbar |
| Operating Input Pressure Range | 10–1030 mbar |
| Speed Range | 285–1100 rpm |
| Rated Speed | 1100 rpm |
| Noise Level (low vacuum) | 54 dB(A) |
| Dimensions (W×D×H) | 115 × 292 × 280 mm |
| Weight | 8.5 kg |
| Power Supply | 100–240 V, 50/60 Hz |
| Rated Power Consumption | 120 W |
| Standby Power | 1.5 W |
| Enclosure Protection | IP20 (DIN EN 60529) |
| Wetted Materials | Al₂O₃, PTFE, FFKM (FFPM), PPS, NBR |
| Housing Material | Cast aluminum with thermoplastic polymer coating |
| Ambient Temperature Range | 5–40 °C |
| Max. Relative Humidity | 80% @ ≤31 °C, linearly decreasing to 50% @ 40 °C |
| Interfaces | USB-C, Analog Input (0–10 V) |
| Display | LED line display |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Oil-Free Diaphragm Pump |
| Pumping Speed | 1 m³/h (16.67 L/min) |
| Ultimate Pressure (without gas ballast) | 9 mbar |
| Operating Speed Range | 285–1100 rpm |
| Noise Level at Low Vacuum | 54 dB(A) |
| Dimensions (W×D×H) | 115 × 292 × 280 mm |
| Weight | 8.5 kg |
| Power Input | 120 W (100–240 V, 50/60 Hz) |
| Standby Power | 1.5 W |
| Enclosure Rating | IP20 |
| Materials in Contact | Al₂O₃, PTFE, FFKM (FFPM), PPS, NBR |
| USB-C Interface | Yes |
| Analog Input | Yes |
| Ambient Temperature Range | 5–40 °C |
| Max. Relative Humidity | 80% @ 31 °C (linearly decreasing to 50% @ 40 °C) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Vacuum Controller for Laboratory Vacuum Systems |
| Model | VC 10 lite |
| Control Interface | Manual + Programmable (10 user-defined programs, 10-step pressure/time profiles) |
| Pressure Range (absolute) | 1–1100 mbar |
| Pressure Accuracy | ±1 mbar |
| Sensor Type | Ceramic Al₂O₃ capacitive pressure sensor |
| Display | TFT screen with selectable units (mbar, hPa, mmHg, Torr) |
| Communication | USB (Type A to Micro-B, 2 m), RS 232 |
| Chiller Control Output | Yes (24 V DC, 1 A) |
| Solvent Database | Integrated |
| Auto-Cleaning Function | Yes |
| Vent Valve | Integrated, inert gas purging capability |
| VENT Key | Dedicated anti-bumping safety function |
| Vacuum Leakage Test | Built-in diagnostic routine |
| Enclosure Rating | IP20 (DIN EN 60529) |
| Operating Ambient | 5–40 °C, ≤80 % RH |
| Dimensions (W×H×D) | 95 × 150 × 110 mm |
| Weight | 1.284 kg |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Max. Input Power | 24 W |
| Standby Power | 2 W |
| Materials in Contact | Al₂O₃, PTFE, FPM, PPS |
| Housing Material | PBT |
| Mounting | 16 mm clamp bracket |
| Compliance | CE, RoHS, EMC Directive 2014/30/EU |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | VC 10 pro |
| Instrument Type | Vacuum Controller |
| Product Type | Oil-Free Pump Controller |
| External Dimensions | 95 × 150 × 110 mm |
| Weight | 1.5 kg |
| Pressure Measurement Range (Absolute) | 1–1100 mbar |
| Pressure Display Accuracy | ±1 mbar |
| Temperature Input Support | PT1000 sensor (−10 to 200 °C, accuracy ±1 K) |
| Control Modes | Automatic, Manual, Pump %, Program (10 programs × 10 segments) |
| Communication Interfaces | RS232, USB |
| Chiller Control | Yes |
| Vacuum Leakage Test Function | Yes |
| Enclosure Rating | IP20 |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Max Input Power | 24 W |
| Standby Power | 2 W |
| Material Contacting Media | Al₂O₃, PTFE, FPM, PPS |
| Housing Material | PBT |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Model | P12Z-301 |
| Pump Type | Diaphragm–Rotary Vane Hybrid Vacuum Pump |
| Ultimate Vacuum | <2×10⁻³ mbar |
| Pumping Speed | 11 m³/h |
| External Dimensions (W×D×H) | 590 × 345 × 420 mm |
| Weight | 42.5 kg |
| Motor Power | 900 W |
| Oil Capacity | 1400 mL |
| Electrical Supply | 230 V, 50 Hz |
| Inlet Port | DN 25 KF |
| Oil-Lubricated Rotary Vane Stage | Yes |
| Chemical Resistance | Enhanced via Integrated Corrosion-Resistant Diaphragm Stage |
| Steam Tolerance | High |
| Safety Features | Integrated Pressure Relief Valve, Oil Aeration Bubble Device, Liquid–Gas Separation Bottle |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Pump Type | Hybrid (Rotary Vane + Chemically Resistant Diaphragm) |
| Model | P23Z-301 |
| Ultimate Vacuum | < 2 × 10⁻³ mbar |
| Pumping Speed | 21 m³/h |
| Motor Power | 900 W |
| Dimensions (W × D × H) | 590 × 345 × 420 mm |
| Weight | 46 kg |
| Oil Capacity | 1000 mL |
| Electrical Supply | 230 V, 50 Hz |
| Inlet Port | DN 25 KF |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Model | P6Z-101 |
| Pump Type | Hybrid (Rotary Vane + Chemically Resistant Diaphragm) |
| Ultimate Vacuum | <2×10⁻³ mbar |
| Pumping Speed | 5.8 m³/h |
| Dimensions (W×D×H) | 500×330×340 mm |
| Weight | 25.5 kg |
| Motor Power | 400 W |
| Oil Capacity | 1000 mL |
| Electrical Supply | 230 V, 50 Hz |
| Inlet Port | DN 16 KF |