Purification Equipment
Filter
Showing 631–660 of 1250 results
| Brand | JIAYUAN |
|---|---|
| Origin | Beijing, China |
| Model | MD200-1A |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5°C to 160°C |
| Temperature Stability | ±0.5°C (@40°C), ±1.0°C (@120°C) |
| Gas Flow Rate | 15 L/min |
| Sample Capacity | 12 positions |
| Heating Power | 300 W |
| Display Resolution | 0.1°C |
| Timer Range | 1–99 h 59 min |
| Ramp Time | ≤15 min (25°C → 160°C) |
| Max Lift Travel | 200 mm |
| Dimensions (L×W×H) | 260 × 220 × 450 mm |
| Weight | 6.5 kg |
| Compatible Modular Blocks | BK15–BK21 (12-position, diameters 10–20 mm) |
| Brand | Jiayuan |
|---|---|
| Origin | Beijing, China |
| Model | MD200-1A |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5°C to 150°C |
| Temperature Uniformity | ±0.5°C (at 40–100°C) |
| Tube Capacity | 0.5 mL to 15 mL |
| Gas Flow Rate | 0–10 L/min |
| Sample Positions | 12 |
| Heating Power | 200 W |
| Display | LED, 0.1°C resolution |
| Timer Range | 0–99 h 59 min |
| Max Operating Pressure | ≤0.1 MPa |
| Dimensions | 280 × 240 × 500 mm |
| Safety | Over-temperature protection, real-time fault detection & audible alarm |
| Modular Compatibility | BK19 (96 × 0.2 mL tubes), BK20 (8-well microplate) |
| Brand | Jiayuan |
|---|---|
| Origin | Beijing, China |
| Model | MD200-2 |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5°C to 160°C |
| Temperature Stability | ±0.5°C (@40°C), ±1.0°C (@120°C) |
| Display Resolution | 0.1°C |
| Temperature Uniformity | ±0.5°C |
| Heating Power | 500 W |
| Gas Flow Rate | Up to 15 L/min |
| Max Gas Pressure | 0.02 MPa (≤16 needles), 0.05 MPa (>16 needles) |
| Sample Capacity | 24-position |
| Adjustable Height Travel | 200 mm |
| Timer Range | 1–99 h 59 min |
| Warm-up Time | ≤15 min (25°C → 160°C) |
| Dimensions (L×W×H) | 260 × 220 × 450 mm |
| Weight | 7.5 kg |
| Voltage | 220 V, 50/60 Hz |
| Interchangeable Modules | BK01–BK13 (including 1.5 mL & 2.0 mL centrifuge tubes, 10–40 mm OD glass tubes) |
| Brand | Guangzhou Jingying |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TW100 |
| Price Range | USD 1,400 – 7,000 (FOB) |
| Purified Water Grade | GB/T 6682–2008 Grade II (Equivalent to ASTM D1193 Type III / ISO 3696 Class 3) |
| Feed Water | Municipal tap water (TDS ≤ 300 ppm, temp. 1–45 °C, pressure 0.1–0.5 MPa) |
| Output Flow Rate | 100 L/h |
| Conductivity | ≤ 0.2 µS/cm @ 25 °C |
| Salt Rejection Rate | ≥ 99% |
| Dimensions (W×D×H) | 470 × 390 × 860 mm |
| Weight | 50 kg |
| Power Supply | 220 V / 50 Hz, 50–100 W |
| Noise Level | ≤ 40 dB(A) |
| RO Membrane | Dow Filmtec™ FT30 certified composite polyamide membrane |
| Pre-treatment | NSF-certified integrated dual-channel injection-molded cartridge system (15"/30") |
| Storage Tank | 100 L open PE tank with triple-level float control + NSF-certified vacuum-pressure bladder tank |
| Pump | CE-certified adjustable-pressure quiet RO booster pump (rated >10,000 h MTBF) |
| Pressure Monitoring | Analog RO inlet/outlet pressure gauges |
| Safety Features | Low-water cutoff, auto-restart after power failure, full-tank shutoff, ultra-low pressure protection, auto-flush on startup |
| Brand | Jinpu |
|---|---|
| Origin | Shandong, China |
| Model | GAS-10A |
| Sample Capacity | 10 gas sampling bags |
| Control Interface | LCD touch screen |
| Actuation | Solenoid-valve-based automated sequencing |
| Application Domain | Ambient air pre-concentration, VOC analysis, environmental monitoring, laboratory GC/GC-MS sample introduction |
| Brand | Jinshi |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | Jinshi Vap 01 Vacuum Centrifugal Concentrator |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | Ambient +5 °C to 50 °C (continuously adjustable) |
| Temperature Control Accuracy | ±0.5 °C across full range |
| Sample Processing Capacity | ≥4 L per 24 h |
| Vacuum Source Compatibility | Scroll dry pump, chemical diaphragm pump, or lyophilizer vacuum system |
| Optional Accessories | Cold trap (recommended for volumes >100 mL), heated rotor chamber, multi-port manifold interface for lyophilizer integration |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | RE-3000AA |
| Evaporation Flask Capacity | 50–3000 mL |
| Ultimate Vacuum Range | –0.01 to –0.095 MPa (built-in vacuum controller, accuracy ±0.2–0.5%) |
| Rotation Speed | 0–200 rpm (bidirectional rotation) |
| Temperature Control Range | Room temperature to 99 °C (PID-controlled water bath, color touchscreen display) |
| Temperature Accuracy | ±1 °C |
| Condenser Surface Area | 0.15 m² (dual-flow vertical condenser with standardized 24/40 ground-glass joints and extended glass shaft tube) |
| Connection Interface | M42 bayonet-type locking nut |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | RE-3000D |
| Evaporation Flask Capacity | 50–3000 mL |
| Rotation Speed Range | 0–200 rpm |
| Temperature Control | PID-controlled heating bath with digital display, ambient to 99 °C |
| Temperature Accuracy | ±1 °C |
| Condenser Type | Cold-trap (dry-ice-cooled) |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RE-52 |
| Rotating Flask Capacity | 50–2000 mL |
| Rotation Speed Range | 0–150 rpm |
| Temperature Control Range | Ambient to 99 °C |
| Temperature Control Accuracy | ±1 °C |
| Condensing Surface Area | 0.08 m² (coiled cold finger condenser) + optional dry ice cooling interface |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | RE-5203 |
| Capacity | 3 L |
| Rotational Speed | Electronically Controlled, 0–120 rpm with Digital Controller |
| Temperature Control Range | Digital Display, Automatic Control from Ambient to 99 °C |
| Temperature Accuracy | ±1 °C |
| Condenser Cooling Surface Area | 0.15 m² |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | RE-5298 |
| Capacity | 3 L |
| Rotational Speed | Electronically Controlled, 0–100 rpm |
| Temperature Control Range | Digital Thermostatic Control, Ambient to 99 °C |
| Temperature Accuracy | ±1 °C |
| Condenser Type | Dual-Return Standard-Ground-Joint Condenser |
| Condensing Area | 0.15 m² |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | RE-5299 |
| Standard Flask Capacity | 250 mL rotating flask (pear-shaped, 24/29 joint) + 500 mL collection flask (round-bottom, 24/29 joint) |
| Rotational Speed Range | 0–130 rpm |
| Temperature Control Range | Ambient to 99 °C (digital PID temperature controller with LED display) |
| Temperature Accuracy | ±1 °C |
| Condenser Cooling Surface Area | 0.12 m² |
| Drive Type | DC motor with digital speed regulation |
| Lift Mechanism | Motorized vertical lift (electromechanical) |
| Condenser Configuration | Vertical top-entry condenser with dual-layer cooling jacket |
| Brand | Jinye |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SZ-97A |
| Pricing | Available Upon Request |
| Brand | JRY |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | JRY-NS-12 |
| Instrument Type | Automated Quantitative Concentrator |
| Temperature Range | Ambient to 95 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Maximum Sample Capacity | 200 mL per channel |
| Vacuum Level | <0.02 mbar |
| Oscillation Speed | 0–1200 rpm |
| Timer Range | 00:01 to 99:59 (hh:mm) |
| Power Rating | 1500 W |
| Voltage | 220 V AC |
| Independent Channel Architecture | 12 channels |
| Solvent Recovery | Integrated Cold Trap with Condensate Collection |
| Brand | JRY |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | JRY-NS-42 |
| Vacuum Pump Flow Rate | 40 L/min |
| Vacuum Range | 0–0.085 MPa |
| Heating Bath Dimensions | 300 mm × 260 mm × 120 mm (transparent water bath) |
| Max. Sample Capacity | 42 positions × 50 mL |
| Vortex Oscillation Frequency | Up to 1500 rpm |
| Cooling System | Recirculating Chiller with 8 °C or lower setpoint |
| Collection Flask | 2500 mL borosilicate glass, calibrated |
| Control Interface | ≥7-inch capacitive touchscreen with programmable evaporation profiles |
| Endpoint Detection | Automated endpoint control (pressure/temperature/time-based logic) |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | JRY |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | JRY-NS01 |
| Price | USD 7,000 (approx.) |
| Temperature Control Accuracy | ±0.1 °C |
| Temperature Uniformity | ≤1 °C |
| Sample Capacity | 24 positions |
| Drive System | Hall-effect DC motor |
| Oscillation Frequency | Adjustable and Precise |
| Display | High-resolution color touchscreen |
| Real-time Data | Dynamic temperature curve + operational parameter logging |
| Tube Compatibility | 100 mL, 200 mL, 250 mL evaporative tubes (optional) |
| Brand | JRY |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | JRY-ZL100 |
| Instrument Type | Standard Quartz Glass Distillation System |
| Heating Method | Far-Infrared Ceramic Radiant Heater |
| Cooling Method | External Recirculating Chiller |
| Heating Positions | 6 Independent Channels |
| Temperature Range | 5–350 °C (0.1 °C Control Resolution) |
| Timer Range | 0–24 h (1 s Precision) |
| Distillate Endpoint Accuracy | ±0.05 g |
| Max Distillate Mass per Channel | 500 g |
| Cooling Capacity | ≥1000 W |
| Power Supply | 220 V AC / 16 A / 3000 W |
| Brand | JTONE |
|---|---|
| Origin | Guangdong, China |
| Model | AYJ-5 |
| Construction Material | Borosilicate 3.3 Glass |
| Tower Height | ≈2800 mm |
| Tower Diameter (ID) | 25 mm |
| Pot Volume | 5 L |
| Packing Effective Height | 1 m |
| Maximum Heating Temperature | 300 °C |
| Ultimate Vacuum (Open System) | ≤0.1 mbar |
| Condenser Type | Vertical |
| Heat Exchange Area | 0.2 m² |
| Reflux Ratio Control | Yes |
| Continuous Sampling Valve | Yes |
| Temperature Monitoring | Integrated Digital Display |
| Power Supply | 220 V, 50/60 Hz, Single Phase |
| Brand | JTONE |
|---|---|
| Origin | Zhejiang, China |
| Model | JTZL-6 |
| Heating Method | Far-Infrared Ceramic Heater (6 independent units) |
| Max. Heating Power per Unit | ≤800 W |
| Temperature Control Range | Ambient to 400 °C |
| Distillation Capacity | 6 samples simultaneously |
| Individual Zone Temperature Control | Yes |
| Endpoint Detection | Gravimetric mode (±2 mL accuracy) and timer mode (0–999 min) |
| Cooling System | Built-in air-cooled recirculating chiller (standard model) |
| Evaporation Vessel Options | 250 mL × 6 or 500 mL × 6 |
| Power Supply | 220 V / 50 Hz |
| Compliance | Designed for EPA Methods 4500-NH₃, 4500-FCN, ISO 11261, ISO 6439, ASTM D129, USP <467>, and GLP-compliant laboratory workflows |
| Safety Features | Vacuum electromagnetic anti-suck-back valve, micro-boil regulation, gold-coated thermal insulation base, flameless heating, IP22-rated enclosure |
| Brand | JTONE |
|---|---|
| Origin | Guangdong, China |
| Model | JTZL-6Y |
| Instrument Type | Quartz Glass Distillation Apparatus |
| Heating Method | Far-Infrared Ceramic Heating |
| Cooling Method | Integrated Compressor-Based Refrigeration System |
| Distillation Rate | 12 mL/min |
| Heating Ramp Time | 5–20 min |
| Heating Units | 6 Independent Far-Infrared Ceramic Heaters |
| Temperature Control Range | Ambient to 400 °C |
| Endpoint Detection | Dual-Mode (Weight-Based ±2 mL Accuracy + Timer) |
| Power Supply | 220 V / 50 Hz |
| Distillation Vessel Capacity | 250 mL × 6 or 500 mL × 6 (Customizable) |
| Anti-Suckback Protection | Electromagnetic Vacuum Break Valve |
| Micro-Boil Regulation | Dynamic Power Modulation |
| Safety Features | Gold-Coated Thermal Insulation Base, Flame-Free Operation, IPX4 Water Resistance |
| Brand | JU CHUANG ENVIRONMENTAL |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | JC-GGC400 |
| Instrument Type | Sub-boiling Distillation Apparatus |
| Heating Method | Electric |
| Cooling Method | Air-cooled |
| Distillation Flow Rate | 0–10 L/min |
| Heating Ramp Time | ≤5 min |
| Endpoint Control | Automatic Temperature Hold |
| Heating Positions | 4 independent channels |
| Brand | Kyocera |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JUPT-IV Series |
| Quotation | Available Upon Request |
| Control Interface | Touch-key with LCD display |
| Safety Features | Low-water alarm, power-failure protection |
| RO System | Integrated anti-scaling program + manual RO membrane flush button |
| Control Core | IC-based microcomputer controller |
| Monitoring | Real-time online water quality monitoring |
| Dual-Outlet Design | Grade III purified water + Grade I ultrapure water |
| Auto-Stop | Full-tank shutdown |
| Auto-Start | Activated by inlet supply or user demand |
| UV Sterilization | Dual-wavelength (185 nm + 254 nm) UV lamp with TOC reduction capability |
| Final Filtration | 0.45 µm / 0.22 µm pre-filtered high-flux terminal filter |
| Pre-desalination | Two-stage pre-desalting system (optional for high-TDS feedwater) |
| Scalability | Upgradable for enhanced water quality and flow capacity |
| Feed Water | Municipal tap water, pressure 0.1–0.5 MPa |
| RO Production Rate | 5–20 L/h |
| Continuous Dispensing Flow | 1.5 L/min |
| Grade III Water Conductivity | 2–10 µS/cm (meets GB/T 6682–1992 Class III & ASTM CAP/NCCLS standards) |
| Grade I Ultrапure Water Resistivity | ≥18.20 MΩ·cm @ 25 °C (meets GB/T 6682–1992 Class I & ASTM CAP/NCCLS standards) |
| Silica Rejection Rate | >99.9% |
| Absorbance (254 nm, 1 cm path) | ≤0.01 |
| Soluble Silica [as SiO₂] | <0.01 ppm |
| Particles (>0.22 µm) | <1/mL |
| Power Supply | 220 V AC, 50 Hz |
| Operating Environment | 5–40 °C |
| Optional Accessories | Sediment pre-filter, water softener (for hardness >200 mg/L as CaCO₃), desalinator (for TDS >400 ppm) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CENTRIFAN™ PE |
| Pricing | Available Upon Request |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GelMaster-4000 |
| Flow Rate | 0–50 mL/min |
| Auto-sampler Volume | 5 mL standard loop (customizable), 66-position 20 mL vial tray |
| Fraction Collector Capacity | 96-position 60 mL vial tray (customizable) |
| UV Detection Wavelength Range | 190–800 nm |
| GPC Column | 20 × 300 mm, Bio-Beads S-X3 (200–400 mesh), eluent: ethyl acetate/cyclohexane (3:7, v/v) |
| Compliance | AOAC 984.21, EPA SW-846 Method 3640A, FDA 2905A, EN 12393, EN 1528, S-19, S35L00.00-34 |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | 25–80 °C |
| Temperature Control Accuracy | ±1 °C |
| Sample Capacity per Tube | 3 mL (tail tube volume) |
| Final Absolute Vacuum | 30 mbar |
| Vacuum Pump Flow Rate | 30 L/min |
| Cooling Circulator Temp Range | 10 °C to Ambient |
| Heating Platform Max Temp | 100 °C |
| Rotational Speed | 0–250 rpm |
| Power Supply | 220–240 V, 50/60 Hz |
| Max Power Consumption | 2200 W |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Category | Vacuum Centrifugal Concentrator |
| Temperature Range | 10–40 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Maximum Sample Volume per Position | 120 mL |
| Sample Capacity | 1–6 parallel positions |
| Final Absolute Vacuum | 8 mbar |
| Cooling Circulator Range | −10 to +25 °C |
| Vacuum Pump Flow Rate | 3 L/min at 0.6 bar |
| Vacuum Pump Speed Control | Yes |
| Rotational Agitation | 0–600 rpm |
| Tail Tube Volumes Supported | 0.3, 1, or 3 mL |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | VNH-1200 |
| Instrument Category | Automated Quantitative Concentrator |
| Temperature Range | Ambient to 150 °C |
| Sample Capacity | 5–120 mL per tube (12-position) |
| Final Absolute Vacuum | 8 mbar |
| Vacuum Pump Flow Rate | 1.8 m³/h |
| Condenser Cooling Range | −10 °C to +25 °C |
| Programmable Temperature Profile | 9-step gradient (0–10 h per step) |
| Vortex Agitation Speed | 0–600 rpm |
| Tail-Tube Volumes | 0.3 mL / 1 mL / 3 mL |
| Control Interface | Touchscreen LCD |
| Power Supply | 220–240 V, 50/60 Hz, Max 1500 W |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | Ambient to 100 °C |
| Temperature Control Accuracy | ±1 °C |
| Sample Capacity | 1–6 / 12 (standard), up to 48 (customizable) |
| Final Absolute Vacuum | 30 mbar |
| Solvent Recovery | Integrated Condensation System |
| Vacuum Pump Flow Rate | 30 L/min |
| Cooling Circulator Range | 10 °C to Ambient |
| Programmable Temperature Profile | 6-step, 0–10 h per step |
| Vortex Agitation Speed | 0–250 rpm |
| Tail-tube Volumes | 0.3 / 1 / 3 mL |
| Heating Method | Selectable Metal Bath or Water Bath |
| Power Supply | 220–240 V, 50/60 Hz, Max 2200 W |
| Control Interface | PC-based Software with Audit Trail |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | Ambient to 100 °C |
| Temperature Control Accuracy | ±1 °C |
| Sample Capacity | 1–48 positions (standard: 24) |
| Final Absolute Vacuum | 30 mbar |
| Condensate Recovery | Integrated |
| Heating Options | Metal Bath or Water Bath (selectable) |
| Programmable Stages | 6-step gradient temperature control (0–10 h per stage) |
| Rotational Speed | 0–250 rpm |
| Solvent Recovery Efficiency | >95% |
| Cooling Circulator Compatibility | 10 °C to ambient |
| Vacuum Pump Flow Rate | 30 L/min |
| Power Supply | 220–240 V, 50/60 Hz |
| Max Power Consumption | 2200 W |
| Brand | KEZHE SHANGHAI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Vacuum Centrifugal Concentrator |
| Temperature Range | Ambient to 100 °C |
| Temperature Control Accuracy | ±1 °C |
| Sample Capacity | 1–48 positions (6/12 standard, 24/48 optional) |
| Vacuum Range | 30 mbar to atmospheric pressure |
| Vortex Speed | 0–250 rpm |
| Cold Trap Condensation | Integrated |
| Solvent Recovery | Yes |
| Heating Options | Metal Bath or Water Bath (selectable) |
| Final Volume Precision | 0.3 / 1 / 3 mL tail-tube options |
| Power Supply | 220–240 V, 50/60 Hz, max 2200 W |