Refrigeration Equipment
Filter
Showing 421–450 of 1585 results
| Brand | Hettich |
|---|---|
| Model | CT-40 |
| Type | Cryogenic Cold Trap |
| Cooling Method | Compressor-based refrigeration with R404a |
| Temperature Range | –40 °C to ambient |
| Temp. Control Accuracy | ±1 °C |
| Condensing Surface Area | 760 cm² |
| Max. Capture Capacity | 284 mL ethanol / 6 h (at –35 °C to –40 °C) |
| Water Capture | 260 mL / 12 h (at –15 °C) |
| Power Consumption | 320 W |
| Dimensions (W×D×H) | 580 × 250 × 560 mm |
| Weight | 53 kg |
| Electrical Supply | AC 220 V, 50 Hz, 15 A |
| Safety Features | Compressor overload protection, high-pressure cut-off, timed compressor rest cycle, auto-defrost function, temperature self-regulation |
| Collection Vessel Options | 300 mL or 600 mL borosilicate glass (chemical-resistant, wide-mouth, sealed) |
| Brand | Hexion |
|---|---|
| Model | CT-50 |
| Temperature Range | –50 °C to Ambient |
| Adjustable Setpoint Range | –45 °C to Ambient |
| Temperature Control Accuracy | ±1 °C |
| Cooling Method | Compressor-based, R404a Refrigerant |
| Max. Power Consumption | 380 W |
| Condensing Surface Area | 760 cm² |
| Max. Solvent Capture Capacity | 284 mL/6 h (Ethanol, –35 °C to –40 °C) / 260 mL/12 h (Water, –15 °C) |
| Collection Vessel Options | 300 mL or 600 mL Borosilicate Glass |
| Dimensions (W×D×H) | 580 × 250 × 560 mm |
| Weight | 54 kg |
| Protection Features | Compressor Overload Protection, High-Pressure Cut-off, Timed Compressor Rest, Auto-Demand Defrost Control, Thermal Self-Regulation |
| Interface | TFT-LCD Touch + Physical Keypad |
| Circulation Type | Closed-loop |
| Power Supply | AC 220 V, 50 Hz, 15 A |
| Operating Ambient | 15–30 °C |
| Inlet/Outlet Port | Φ12 mm Bayonet Fitting |
| Brand | HTCY |
|---|---|
| Origin | Beijing, China |
| Model | FT-M13-THP |
| Type | Split-System |
| Cooling Method | Air-Cooled |
| Temperature Range | 8–30 °C |
| Temperature Stability | ±1 °C |
| Refrigeration Capacity | 13,000 W |
| Circulation Pump Pressure | 2.5–5.4 bar |
| Flow Rate | 8–58 L/min |
| Reservoir Volume | 230 L |
| Operating Mode | Continuous |
| Power Supply | 3-Phase AC 380 V, 50 Hz |
| Brand | HTCY |
|---|---|
| Origin | Beijing, China |
| Model | LX-M15-THP |
| Cooling Type | Air-Cooled |
| Temperature Control Range | 8–30 °C |
| Temperature Stability | ±2 °C |
| Refrigeration Capacity | 15,000 W (at 30 °C ambient / 22 °C outlet) |
| Circulating Pump Pressure | 2–4.6 bar |
| Flow Rate | 17–117 L/min |
| Reservoir Volume | 110 L |
| Power Supply | 3-phase 380 V / 50 Hz |
| Compressor Noise Level | 64 dBA |
| Pump Power | 750 W |
| Pump Head | 20–46 m |
| Net Weight | 350 kg |
| Dimensions (W×H×D) | 590×1405×1365 mm |
| Refrigerant | R22 |
| Inlet/Outlet Port | DN25 internal thread |
| Drain Port | DN15 internal thread |
| Flow Switch Threshold | ON >10 L/min, OFF <8 L/min |
| Operating Mode | Continuous |
| Brand | HTCY |
|---|---|
| Origin | Beijing, China |
| Model | LX-S10-BLP |
| Type | Integrated (All-in-One) |
| Cooling Method | Air-Cooled |
| Temperature Range | 8–30°C |
| Temperature Stability | ±0.2–0.3°C |
| Refrigeration Capacity | 1000 W (at 30°C ambient, 22°C outlet water) |
| Pump Flow Rate | 0–18 L/min |
| Pump Head | 28–7 m |
| Reservoir Volume | 4.1 L |
| Power Supply | 1φ, 220 V, 50 Hz |
| Refrigerant | R22 |
| Compressor Power | 0.5 HP |
| Pump Power | 85 W |
| Flow Protection Threshold | ≤2 L/min (auto-shutdown) |
| Net Weight | 43 kg |
| Dimensions (W×D×H) | 440 × 560 × 772 mm |
| Inlet/Outlet Port | Rc1/2 (DN15 internal thread) |
| Drain Port | Rc1/2 (DN15 internal thread) |
| Display Resolution | 0.1°C |
| Operating Mode | Continuous |
| Brand | HTCY |
|---|---|
| Origin | Beijing, China |
| Model | LX-S12-BHP |
| Type | Integrated Circulating Chiller |
| Cooling Method | Air-Cooled |
| Temperature Range | 8–30 °C |
| Temperature Stability | ±0.3 °C |
| Refrigeration Capacity | 1200 W |
| Circulating Pump Pressure | 0.27 MPa |
| Flow Rate | 30 L/min |
| Reservoir Volume | 7.8 L |
| Control Mode | Fast Bypass Temperature Regulation |
| Refrigerant | R22 |
| Compressor Power | 0.5 HP |
| Power Supply | 1φ, 220 V, 50 Hz |
| Noise Level | 52 dBA |
| Dimensions (W×D×H) | 435 × 560 × 760 mm |
| Net Weight | 69 kg |
| Brand | HTCY |
|---|---|
| Origin | Beijing, China |
| Model | LX-S20 |
| Instrument Type | Integrated Circulating Chiller |
| Cooling Method | Air-Cooled |
| Temperature Range | 8–30 °C |
| Temperature Stability | ±0.3 °C |
| Refrigeration Capacity | 2000 W |
| Circulation Pump Pressure | 2.7 bar |
| Flow Rate | 30 L/min |
| Reservoir Volume | 10.5 L |
| Operating Mode | Continuous |
| Refrigerant | R22 |
| Compressor Power | 1 HP |
| Pump Power | 370 W |
| Pump Head | 27 m |
| Display Resolution | 0.1 °C |
| Noise Level | ≤56 dBA |
| Dimensions (W×D×H) | 470×565×900 mm |
| Net Weight | 71 kg |
| Electrical Supply | 1φ, 220 V, 50 Hz |
| Rated Current | 8.25 A |
| Fan Power | 2 × 60 W |
| Airflow | 1400 m³/h |
| Inlet/Outlet Port | DN15 internal thread (½″) |
| Drain Port | DN15 internal thread (½″) |
| Flow Meter | Adjustable low-flow cutoff (default: 2.0 L/min) |
| Brand | HTCY |
|---|---|
| Origin | Beijing, China |
| Model | LX-S45 |
| Cooling Type | Air-cooled |
| Temperature Range | 8–30 °C |
| Temperature Stability | ±0.3 °C |
| Refrigeration Capacity | 4500 W |
| Circulating Pump Pressure | 2.7 bar |
| Flow Rate | 30 L/min |
| Reservoir Volume | 15.5 L |
| Power Supply | 1φ, 220 V, 50 Hz |
| Refrigerant | R22 |
| Compressor Power | 2 HP |
| Pump Power | 370 W |
| Pump Head | 27 m |
| Noise Level | ≤57 dBA |
| Net Weight | 98 kg |
| Dimensions (W×D×H) | 525×595×1015 mm |
| Enclosure Material | Stainless Steel Reservoir |
| Control Interface | LCD Display with Bypass Regulation |
| Flow Protection | Adjustable Flow Switch (Default: 2.0 L/min) |
| Inlet/Outlet Port | DN20 (3/4″ internal thread) |
| Drain Port | DN15 (1/2″ internal thread) |
| Operating Mode | Continuous Duty |
| Brand | HTCY |
|---|---|
| Origin | Beijing, China |
| Model | LX-S65 |
| Instrument Type | Integrated Unit |
| Cooling Method | Air-Cooled |
| Temperature Control Range | 8–30 °C |
| Temperature Stability | ±0.3 °C |
| Refrigeration Capacity | 6500 W |
| Circulating Pump Pressure | 2.7 bar |
| Circulating Flow Rate | 30 L/min |
| Reservoir Volume | 18.5 L |
| Control Method | Hot-Gas Bypass |
| Refrigerant | R22 |
| Compressor Power | 2.5 HP |
| Pump Power | 370 W |
| Pump Head | 27 m |
| Display | LCD with 0.1 °C resolution |
| Noise Level | ≤58 dBA |
| Dimensions (W×D×H) | 585×585×1055 mm |
| Net Weight | 115 kg |
| Electrical Supply | 1φ, 220 V, 50 Hz |
| Rated Current | 15.6 A |
| Airflow | 1664 m³/h (dual fans) |
| Fan Power | 85 W × 2 |
| Inlet/Outlet Port | DN20 internal thread (3/4″) |
| Drain Port | DN15 internal thread (1/2″) |
| Flow Meter | Adjustable low-flow cutoff (default: 2.0 L/min) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | HUXI Scientific Instrument Co., Ltd. |
| Model | HXLG-10-50B |
| Type | Standard Shelf-Type Freeze Dryer |
| Application | Laboratory Use |
| Lyophilization Area | 0.12 m² |
| Ultimate Vacuum | ≤2 Pa (empty chamber) |
| Condenser Capacity | 4 kg/24 h |
| Condenser Temperature | −60 °C |
| Dimensions (W×D×H) | 600 × 558 × 390 mm |
| Power Supply | AC 220 V, 50 Hz, 25 A |
| Total Power Consumption | 1050 W |
| Net Weight | 100 kg |
| Ambient Operating Temperature | ≤30 °C |
| Noise Level | ≤55 dB(A) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Equipment Type | Standard Shelf-Type Freeze Dryer |
| Application Scope | Laboratory Use |
| Lyophilization Area | 0.12 m² |
| Ultimate Vacuum | 2 Pa |
| Condensate Capacity (per batch) | 4 kg/24 h |
| Cold Trap Temperature | −60 °C |
| Main Unit Dimensions | 685 × 560 × 760 mm |
| Power Supply | AC 220 V, 50 Hz, 25 A |
| Total Power Consumption | 1050 W |
| Net Weight | 100 kg |
| Ambient Operating Temperature | ≤30 °C |
| Noise Level | ≤55 dB(A) |
| Chamber Material | Aerospace-Grade Acrylic (Pressure- & Low-Temperature Resistant) |
| Cold Trap Material | 304 Stainless Steel (Coil-Free Interior) |
| Control Interface | Color Touchscreen with Lock Function |
| Data Logging | Real-Time Vacuum, Cold Trap Temp, and Sample Temp |
| Pre-freezing Capability | Integrated Cold Trap Pre-cooling (No External Ultra-Low Freezer Required) |
| Vacuum Connection | KF25 Quick-Release Flange |
| Defrost Mode | One-Touch Automatic Defrost |
| Refrigeration System | Sealed Imported Compressor with Eco-Friendly Mixed Refrigerant |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | HUXI Scientific Instrument Co., Ltd. |
| Model | HXLG-12-50DG |
| Type | Manifold-type lyophilizer with hydraulic stoppering |
| Freeze-drying area | 0.08 m² |
| Ultimate vacuum | 2 Pa |
| Condenser temperature | −60 °C |
| Condensate capacity | 4 kg/batch (24 h) |
| Dimensions (W×D×H) | 685 × 560 × 760 mm |
| Weight | 100 kg |
| Power supply | AC 220 V, 50 Hz, 25 A |
| Rated power | 1050 W |
| Noise level | ≤55 dB(A) |
| Ambient operating temperature | ≤30 °C |
| Brand | IKA |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | RC2 Lite |
| Instrument Type | Integrated Circulating Chiller |
| Cooling Method | Air-Cooled |
| Temperature Range | –10 °C to Room Temperature (RT) |
| Refrigeration Capacity | 400 W @ 20 °C |
| Temperature Stability | ±0.5 °C |
| Circulating Pump Pressure | 0.35 bar |
| Circulating Pump Flow Rate | 15 L/min |
| Reservoir Volume | 1–3.5 L |
| Operating Mode | Continuous |
| Origin | Beijing, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | IMS-40 |
| Price | USD 1,520 (FOB) |
| Ice Production Capacity | 40 kg/24h |
| Storage Capacity | 15 kg |
| Cooling Method | Air-Cooled |
| Water Consumption | ≤1.6 L/h |
| Compressor/Refrigerant | Imported R134a (CFC-free) |
| Cabinet Material | Stainless Steel (AISI 304) |
| Input Power | 280 W |
| Dimensions (L×W×H) | 380 × 543 × 722 mm |
| Net Weight | 40 kg |
| Ice Type | Irregular, Fine Flake Ice (Particle Size: 1–3 mm, Thickness: ~0.5 mm) |
| Compliance | RoHS-compliant Components, TUV/VDE-certified Electrical Parts, SGS-tested Materials |
| Brand | Innoteg |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | InnoFreeze Pro |
| Instrument Type | Multi-Manifold |
| Application Scope | Laboratory Use |
| Condenser Capacity | 7 kg ice capacity |
| Minimum Condenser Temperature | −100 °C |
| Compressor | European-sourced hermetic scroll compressor |
| Refrigeration Technology | Dual-circuit eco-friendly refrigerant system with dedicated plate heat exchanger and high-capacity condenser |
| Control Interface | 5-inch color TFT touchscreen |
| Data Logging | Real-time vacuum pressure, condenser temperature, and shelf/sample temperature with graphical lyophilization curve |
| Data Export | USB port for offline analysis, printing, and archival |
| Vacuum Monitoring | Auto-shutoff if set vacuum threshold not achieved |
| Pump Maintenance | Cumulative runtime tracking with oil change alert |
| Safety Protections | Compressor restart delay & thermal overload protection |
| Vacuum Pump | Dual-stage oil-sealed rotary vane pump with anti-backstreaming design |
| Vacuum Interface | KF25 quick-release flange standard |
| Structural Design | Integrated arc-shaped chassis with 45° ergonomic touchscreen tilt |
| Top Panel Material | 304 stainless steel |
| Condenser Chamber | Large-diameter open cavity, coil-free interior, full-shelf immersion capability for in-situ pre-freezing |
| Thermal Bridge Mitigation | Cold-bridge interrupted condenser flange with wave-profile silicone gasket (molded) and triple-seal architecture |
| Brand | inTEST-Thermonics |
|---|---|
| Origin | USA |
| Type | Integrated Circulating Chiller |
| Cooling Method | Water-Cooled |
| Temperature Range | –80 °C to +200 °C |
| Temperature Stability | ±0.1 °C |
| Refrigeration Capacity | Up to 15 kW @ 20 °C |
| Circulating Pump Pressure | 2 bar (max 50 PSIG) |
| Flow Rate | 38 L/min |
| Reservoir Volume | Not specified |
| Compatible Heat Transfer Fluids | Syltherm XLT (for –40/–60 °C), HFE-7100 (for –80 °C), HFE-7500, KRYO 60, PEG-based glycols |
| Certifications | ISO 9001, ITAR |
| Brand | Jiapeng |
|---|---|
| Origin | Shanghai, China |
| Model | CX-1 |
| Temperature Range | 0–45 °C |
| Effective Volume | 250 L |
| External Dimensions (W×D×H) | 588 × 518 × 1780 mm |
| Power Consumption | 330 W |
| Net Weight | 86 kg |
| Control Accuracy | ±0.5–2 °C |
| Internal Dimensions | 530 × 450 × 1130 mm |
| Door Type | Double-glazed aluminum-framed glass with anti-condensation heating film |
| Shelving | 3 adjustable heavy-duty shelves (30 kg load capacity per shelf) |
| Cooling System | Forced-air convection with optimized duct design |
| Insulation | Monolithic rigid polyurethane foam (≥60 mm thickness) |
| Safety Features | Independent over-temperature protection, audible/visual alarm for temperature deviation and power failure |
| Power Outlets | 2 waterproof internal sockets (220 V, 10 A) |
| Accessories | 2 chromatography column clamps, LED interior lighting, lockable door, adjustable leveling feet + locking casters |
| Humidity Control | Integrated dehumidification function |
| Brand | Jiapeng |
|---|---|
| Origin | Shanghai, China |
| Model | CX-3 |
| Temperature Range | 1–10 °C (factory preset at 4 °C) |
| Effective Volume | 366 L |
| External Dimensions (W×D×H) | 720 × 650 × 1760 mm |
| Net Weight | 150 kg |
| Compressor | Secop (imported) |
| Interior Material | 304 Stainless Steel |
| Insulation | One-shot molded rigid polyurethane foam |
| Door Type | Double-glazed aluminum-framed glass with anti-condensation heating film |
| Humidity Control | Integrated dehumidifier with digital display |
| Data Ports | Dual RJ45-style data transmission ports (left/right side) |
| Shelving | Three fixed-tier stainless steel shelves (570 × 370 mm), load capacity ≤30 kg per shelf |
| Safety | Mechanical door lock, LED + audible high/low temperature & power failure alarm |
| Airflow | Positive-pressure forced-air circulation system |
| Defrost | Automatic cycle defrost |
| Lighting | 30 W LED + optional UV lamp |
| Brand | JRY |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Integrated Unit |
| Cooling Method | Water-Cooled |
| Temperature Range | 0–99.99 °C |
| Temperature Stability | ±0.1 °C |
| Refrigeration Capacity | 1000 W |
| Circulation Pump Pressure | 1.0 bar |
| Circulation Flow Rate | 6 L/min |
| Reservoir Volume | 6 L |
| Operation Mode | Continuous Duty |
| Brand | JRY |
|---|---|
| Origin | Hunan, China |
| Manufacturer Type | Direct Manufacturer |
| Region Category | Domestic (China) |
| Model | JRY-05-B |
| Instrument Type | Integrated Unit |
| Cooling Method | Water-Cooled |
| Temperature Control Range | 0–99.99 °C |
| Cooling Capacity | ≥1000 W |
| Temperature Stability | ±0.1 °C |
| Circulation Pump Pressure | 1.0 bar |
| Circulation Flow Rate | 6 L/min |
| Reservoir Volume | 6 L |
| Operating Mode | Continuous |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | AWC100 |
| Instrument Type | Split-type |
| Cooling Method | Water-cooled |
| Temperature Range | +20 °C to +40 °C |
| Temperature Stability | ±0.5 °C (at 25 °C ambient) |
| Refrigeration Power | 400–500 W (Stage 0: 220–300 W |
| Stage 1 | 120–180 W) |
| Circulating Pump Flow Rate | 2.9 L/min |
| Pump Pressure | 0.2 bar |
| Reservoir Volume | 0.9 L |
| Operating Mode | Continuous |
| Dimensions (W×L×H) | 20 × 34 × 30 cm |
| Weight | 18 kg |
| Power Supply | 230 V, 50/60 Hz |
| Noise Level | <45 dB(A) |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | AWC100 |
| Cooling Type | Water-Cooled |
| Temperature Range | +20 to +40 °C |
| Temperature Stability | ±0.5 °C |
| Refrigeration Power | 550 W (Stage 0) / 1000 W (Stage 1) |
| Circulating Pump Flow Rate | 2.9 L/min |
| Pump Pressure | 0.2 bar |
| Reservoir Volume | 0.9 L |
| Dimensions (W×D×H) | 20 × 34 × 30 cm |
| Weight | 18 kg |
| Power Consumption | 630 W (Stage 0) / 1000 W (Stage 1) |
| Operating Mode | Continuous |
| Noise Level | <45 dB(A) |
| Energy Efficiency | Compressor-Free Thermoelectric Cooling |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Series | F-Series |
| Temperature Range | -10 to +40 °C |
| Stability | ±0.5 °C |
| Refrigeration Power | 0.25 / 0.5 / 1.0 kW |
| Pump Flow Rate | 1.7–9.5 L/min |
| Max. Pressure | 0.35–0.55 bar |
| Reservoir Volume | 1.7–23 L |
| Dimensions (W×L×H) | 24×40×52 cm to 37.5×49×64 cm |
| Compatible Fluids | Water, Water-Glycol Mixtures, Thermal G |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | F1000 |
| Instrument Type | Integrated Circulating Chiller |
| Cooling Method | Air-Cooled |
| Temperature Range | 0 to +40 °C |
| Temperature Stability | ±0.5 °C |
| Pump Flow Rate | 23 L/min |
| Pump Pressure | 1.0 bar |
| Reservoir Volume | 7–9.5 L |
| Operating Mode | Continuous |
| Refrigerant | R134a (GWP = 1430) |
| Compressor | Single-Stage Hermetic |
| Ambient Operating Temperature | 5–40 °C |
| Dimensions (W×L×H) | 37.5 × 49 × 64 cm |
| Weight | 45 kg |
| Sound Pressure Level (1 m) | ≤62 dBA |
| Temperature Control | PID with 0.1 °C Setpoint/Display Resolution |
| Compatible Fluids | Water, Water-Glycol Mixtures, Thermal G |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | F250 |
| Instrument Type | Integrated Circulating Chiller |
| Cooling Method | Air-Cooled |
| Temperature Range | −10 to +40 °C |
| Temperature Stability | ±0.5 °C |
| Refrigeration Capacity | 250 W at 20 °C |
| Circulation Pump Flow Rate | 15 L/min |
| Circulation Pump Pressure | 0.35 bar |
| Reservoir Volume | 2.6 L |
| Operating Mode | Continuous |
| Refrigerant | R134a (GWP = 1430) |
| Sound Pressure Level (1 m) | 59 dBA |
| Dimensions (W×L×H) | 24 × 40 × 52 cm |
| Weight | 27 kg |
| IP Rating | IP20 (splash-proof control panel) |
| Temperature Control | PID with 0.1 °C setpoint/display resolution |
| Safety Features | Over-temperature alarm, low-level alarm, compressor & pump overload protection |
| Wetted Materials | Stainless steel (316L) and chemically resistant engineering plastics |
| Standard Fittings | Two conical hose connectors (for 8 mm and 12 mm ID tubing), M16×1 external thread pump ports |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | F500 |
| Instrument Type | Integrated Circulating Chiller |
| Cooling Method | Air-Cooled |
| Temperature Range | −10 to +40 °C |
| Temperature Stability | ±0.5 °C |
| Refrigeration Capacity | 500 W at 20 °C ambient |
| Pump Flow Rate | 24 L/min |
| Pump Pressure | 0.5 bar |
| Reservoir Volume | 5–7.5 L |
| Operating Mode | Continuous |
| Refrigerant | R134a (GWP = 1430) |
| Compressor | Single-Stage Hermetic |
| Sound Pressure Level | ≤62 dB(A) |
| Dimensions (W×L×H) | 37.5 × 44 × 59 cm |
| Weight | 34 kg |
| Temperature Control | PID with 0.1 °C setpoint/resolution |
| Display | LED |
| Ambient Operating Temperature | 5–40 °C |
| Standard Fittings | Two conical hose connectors (for 8 mm and 12 mm ID tubing), M16×1 male thread pump ports |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model Series | FC Series |
| Cooling Method | Air-Cooled |
| Temperature Range | –20 °C to +80 °C |
| Temperature Stability | ±0.2 °C |
| Refrigeration Capacity | 600 W (FC600) up to 2500 W (FCW2500T) |
| Heating Power | Up to 1.2 kW |
| Maximum Flow Rate | 20 L/min |
| Pump Pressure | 0.5 bar |
| Reservoir Volume | 6–11 L |
| Operating Mode | Continuous |
| External Pt100 Sensor Input | Yes |
| Analog Interface | 0–10 V / 4–20 mA |
| Dual LED Display | Standard |
| Top-Fill Reservoir Design | Standard |
| Liquid Level Indicator | Standard |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | FC1200 |
| Instrument Type | Integrated Circulating Chiller |
| Cooling Method | Air-Cooled |
| Temperature Range | -20 to +80 °C |
| Temperature Stability | ±0.2 °C |
| Heating Power | 1.2 kW |
| Refrigeration Capacity | 1.3 kW @ 20 °C, 0.37 kW @ -10 °C |
| Pump Flow Rate | 20 L/min |
| Pump Pressure | 0.5 bar |
| Reservoir Volume | 8–11 L |
| Operating Mode | Continuous |
| Display | Dual LED |
| Temperature Resolution | 0.1 °C |
| Communication Interface | RS232 (optional), Profibus (optional) |
| Ambient Operating Temperature | 5–40 °C |
| Dimensions (W×L×H) | 46 × 61 × 49 cm |
| Weight | 65 kg |
| Sound Pressure Level (1 m) | ≤53 dBA |
| Hose Connections | Two tapered fittings for 8 mm and 12 mm ID tubing (M16×1 male thread) |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | FC1200S |
| Instrument Type | Integrated Circulating Chiller |
| Cooling Method | Air-Cooled |
| Temperature Range | −15 °C to +80 °C |
| Temperature Stability | ±0.2 °C |
| Refrigeration Capacity | 1200 W at 20 °C |
| Heating Power | 1.2 kW |
| Pump Flow Rate | 22 L/min |
| Pump Pressure | 1.2 bar |
| Reservoir Volume | 8–11 L |
| Operating Mode | Continuous |
| Display Resolution | 0.1 °C |
| Communication Interface | RS232 (optional), Analog Output |
| Ambient Operating Temperature | 5–40 °C |
| Dimensions (W×L×H) | 46×61×49 cm |
| Weight | 66 kg |
| Sound Pressure Level (1 m) | ≤57 dB(A) |
| Hose Connections | Dual quick-fit barb fittings (8 mm and 12 mm ID), M16×1 male thread pump ports |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | FC1200T |
| Instrument Type | Integrated Circulating Chiller |
| Cooling Method | Air-Cooled |
| Temperature Range | –10 °C to +80 °C |
| Temperature Stability | ±0.2 °C |
| Refrigeration Capacity | 1100 W at 20 °C |
| Heating Power | 1.2 kW |
| Pump Flow Rate | 28 L/min |
| Pump Pressure | 3.5 bar |
| Reservoir Volume | 8–11 L |
| Operating Mode | Continuous |
| External Pt100 Sensor Interface | Integrated |
| Analog I/O | 0–10 V / 0–24 mA |
| Communication | RS232 (optional), Profibus (optional) |
| Sound Pressure Level (1 m) | ≤58 dBA |
| Dimensions (W×L×H) | 46×61×49 cm |
| Weight | 67 kg |