- All
- Favorite
- Popular
- Most rated
| Brand | BWB |
|---|---|
| Origin | United Kingdom |
| Model | BWB FL |
| Detection Range | Na: 0.05–1000 ppm, K: 0.05–1000 ppm, Li: 0.1–1000 ppm, Ca: 2.5–1000 ppm, Ba: 5–1000 ppm |
| Detection Limit | Na/K: 0.02 ppm, Li: 0.05 ppm, Ca: 1.0 ppm, Ba: 2.0 ppm |
| Response Time | <15 s |
| Repeatability | CV <1% at 100 ppm (n=20, >10 min post-stabilization) |
| Sample Uptake Rate | 3.0–5.5 mL/min |
| Air Supply | Integrated silent air compressor (switchable to external source) |
| Compliance | CE-marked, GLP-compliant architecture, FDA 21 CFR Part 11-ready software support |
| Brand | BWB |
|---|---|
| Origin | United Kingdom |
| Model | FL |
| Detection Range | Na: 0.1–1000 ppm |
| K | 0.05–1000 ppm |
| Li | 0.1–1000 ppm |
| Ca | 2.5–1000 ppm |
| Detection Limit | Na/K: 0.02 ppm |
| Li | 0.05 ppm |
| Ca | 1.0 ppm |
| Response Time | <15 s |
| Repeatability | <1% RSD (at ≤100 ppm, n=20 over 10 min) |
| Sample Uptake Rate | 3.0–5.5 mL/min |
| Air Supply | Integrated silent air compressor (switchable to external source) |
| Compliance | CE-marked |
| Data Interfaces | RS232 and USB |
| Calibration Modes | Two-point, multi-point, and multi-ion calibration |
| Display Units | ppm, mg/L, mmol/L, meq/L |
| Safety Features | Flame-out detection, auto-shutdown, power-on self-diagnosis |
| Brand | BWB |
|---|---|
| Origin | United Kingdom |
| Model | BWB-XP |
| Detection Elements | Na, K, Li, Ca, Ba |
| Calibration Modes | Two-point, Multi-point, Multi-ion |
| Output Options | 0–1 V analog, RS232, USB |
| Air Supply | Integrated silent air compressor (switchable to external source) |
| Sample Uptake Rate | 3.0–5.5 mL/min |
| Repeatability | CV <1% at ≤100 ppm over 20 injections (≥10 min post-stabilization) |
| Detection Limits | Na/K: 0.02 ppm |
| Li | 0.05 ppm |
| Ca | 1.0 ppm |
| Ba | 10 ppm |
| Linear Range (multi-point) | Na/K: 0.05–1000 ppm |
| Li | 0.1–1000 ppm |
| Ca | 2.5–1000 ppm |
| Ba | 30–3000 ppm |
| Response Time | <15 s (from sample introduction to stable signal) |
| Drift | ≤1% after 30 min stabilization |
| Interference (Na/K/Li at <100 ppm) | <0.5% |
| Display Mode | Real-time simultaneous readout of all five elements (ranked high-to-low) |
| Software | FP-PC v3.x with GLP-compliant reporting, audit trail, data export (up to 10-sample reports), operator/sample metadata tagging, network archiving |
| Compliance | CE-marked |
Show next