- All
- Favorite
- Popular
- Most rated
| Brand | Rohde & Schwarz |
|---|---|
| Origin | Germany |
| Model | R&S ZNA |
| Frequency Range | 9 kHz to 1.5 GHz / 3.2 GHz / 7.5 GHz (base configurations) |
| Extended Frequency Range | Up to 750 GHz with harmonic mixers (e.g., R&S ZVA-Z/ZC series) |
| Dynamic Range | >130 dB (typ. at mid-band, depending on configuration and IF bandwidth) |
| Port Count | 2-port or 4-port configurations available |
| Internal Signal Sources | Up to four phase-coherent synthesized sources |
| Internal Local Oscillators | Up to two dedicated LOs for mixer measurements |
| Receivers | Up to eight independent receivers |
| Pulse Modulation | Up to four integrated pulse modulators/generators |
| Power Sweep Range | –40 dBm to +13 dBm (with optional step attenuators) |
| Brand | Keysight Technologies |
|---|---|
| Origin | USA |
| Model | N5291A |
| Frequency Range | 900 Hz to 120 GHz |
| Configuration | Integrated PNA or PNA-X Base Unit + N5292A Millimeter-Wave Test Controller + N5295AX03 120 GHz Frequency Extender |
| Port Options | 2-port or 4-port |
| Included | Full interconnect cabling set |
| Compliance | Designed for IEEE 1785.1, IEC 61000-4-3, MIL-STD-461G (RS103), and compatible with ISO/IEC 17025-accredited calibration workflows |
| Brand | Yingbo Science & Instrument |
|---|---|
| Origin | Shanghai, China |
| Model | GaN Wafer-Level Dynamic Power Testing System |
| Application | Dynamic Parameter Characterization of GaN Power Devices under Switching Operation |
| Temperature Range | 25 °C to 175 °C |
| Gate Voltage Range | –12 V to +12 V (continuously adjustable) |
| Switching Frequency Range | 10 kHz to 500 kHz |
| Duty Cycle Range | 10% to 90% |
| Minimum Pulse Width | 1 µs |
| Measurement Modes | Dynamic R<sub>DS(on)</sub> (HSW/ZVS), Dynamic V<sub>SD</sub>, Dynamic V<sub>th</sub>, Pulse I–V, Dynamic HTOL/SALT |
| Brand | Maury |
|---|---|
| Origin | USA |
| Model | MT1000 and MT2000 Series Mixed-Signal Active Load-Pull Systems |
| Frequency Range | 1 MHz to 67 GHz |
| Maximum Impedance Tuning Speed | 1000 impedance/power states per minute |
| Baseband/RF/Harmonic Bandwidth (MT2000) | up to 1000 MHz |
| Configurations | MT2000E6-500 (40 GHz, 6-loop, 500 MHz BW), MT2000F4-1000 (67 GHz, 4-loop, 1000 MHz BW) |
| Compliance | Designed for RFIC, MMIC, and GaN PA characterization under pulsed CW, modulated, and multi-tone conditions |
| Brand | Iwatsu |
|---|---|
| Origin | Japan |
| Model Series | CS3000 (3 kV), CS5000 (5 kV), CS10000 (10 kV / 12 kV / 15 kV) |
| Compliance | IEC 61000-4-5, IEC 61010-1 CAT III 3 kV / CAT III 5 kV / CAT III 10 kV |
| Max Output Voltage | 3 kV / 5 kV / 15 kV |
| Max Output Current | 10 A (CS3000/CS5000), 50 A (CS10000-HC variant) |
| Sweep Modes | Linear, Logarithmic, Custom Segment, Bidirectional |
| Interface | USB 2.0, GPIB (optional), Analog Monitor Outputs |
| Software Support | CS-810 Automated Parameter Test Suite (optional), CS-800 Vth/hFE Auto-Detection & Limit Sweep Module (optional) |
Show next