Hanuo HY-6A Digital Dual-Layer Orbital Shaker

Overview

The Hanuo HY-6A Digital Dual-Layer Orbital Shaker is an engineered laboratory shaker designed for consistent, low-shear mixing of biological and chemical samples under ambient conditions. It operates on the principle of orbital motion—where the platform rotates in a horizontal circular path with a fixed 20 mm orbit diameter—ensuring uniform suspension of cells, microbial cultures, reagents, and immunoassay plates without vortexing or splashing. Unlike incubator shakers or temperature-controlled models, the HY-6A is a non-thermostatic unit optimized for room-temperature applications requiring precise speed control and repeatable agitation. Its dual-tier configuration doubles effective throughput while maintaining mechanical stability and minimal cross-vibration between layers—a critical consideration in high-density lab workflows where multiple parallel experiments are conducted simultaneously.

Key Features

• Dual-layer orbital platform with independent load distribution, enabling simultaneous processing of two distinct sample sets without interference.
• Digital LED display with real-time rpm readout and non-linear speed calibration, supporting continuous adjustment from 0 to 220 rpm with ±2 rpm repeatability across operating range.
• Mechanical timer with 1-minute resolution, programmable from 0 to 120 minutes; auto-shutoff ensures protocol adherence and energy conservation.
• Robust brushless DC motor (100 W) delivering sustained torque at low speeds and stable operation at maximum rated speed—engineered for >10,000 hours MTBF under standard lab duty cycles.
• Spring-loaded universal bottle holder system compatible with Erlenmeyer flasks (50–2000 mL), test tubes, petri dishes, and microplate carriers; accommodates heterogeneous vessel geometries without adapter kits.
• Low-noise design (<55 dB(A) at 1 m distance) and vibration-damped base structure suitable for shared lab environments and laminar flow hoods.

Sample Compatibility & Compliance

The HY-6A supports routine handling of aqueous suspensions, bacterial and yeast cultures, cell lysates, ELISA plate washing steps, and buffer equilibration protocols. Its open-platform architecture allows unrestricted airflow and rapid visual inspection during operation—critical for aerobic culture maintenance and contamination monitoring. While not certified for GLP/GMP production environments, the device meets general laboratory safety standards per IEC 61010-1 (2010) for electrical equipment used in measurement, control, and laboratory use. No regulatory certifications (e.g., FDA 21 CFR Part 11, ISO 13485) apply, as it lacks data logging, user authentication, or audit trail functionality—consistent with its classification as a Class I general-purpose shaker.

Software & Data Management

The HY-6A is a standalone hardware-only instrument with no embedded firmware, USB interface, or software connectivity. All operational parameters—including speed setpoint and timer duration—are configured manually via front-panel rotary dial and push-button controls. There is no digital data export, remote control capability, or integration with LIMS or ELN platforms. This design prioritizes operational simplicity, electromagnetic immunity, and long-term reliability in resource-constrained or regulated academic and QC laboratories where traceability is maintained through manual logbooks rather than electronic records.

Applications

• Microbial growth studies requiring gentle, continuous aeration of liquid cultures in shake flasks.
• Antibiotic susceptibility testing and serial dilution preparation in clinical microbiology labs.
• Protein solubilization and antigen-antibody binding kinetics in immunology research.
• Soil/water extract homogenization for environmental analysis (e.g., EPA Method 9060A).
• Pre-analytical sample conditioning prior to centrifugation, filtration, or HPLC injection.
• Quality control checks for reagent stability and lot-to-lot consistency in biomanufacturing support labs.

FAQ

Is the HY-6A suitable for use inside a CO₂ incubator?
No. The unit has no temperature or humidity control and is not rated for humidified or elevated-temperature enclosures.
Can I mount microtiter plates directly on the trays?
Yes—standard 96-well and 384-well plates can be secured using optional plate clamps or adhesive silicone mats; however, the spring rack is optimized for round-bottom vessels.
Does the shaker include overload or overheat protection?
Yes. Integrated thermal cutoff and current-limiting circuitry prevent motor damage during extended operation or excessive load imbalance.
What maintenance is required?
Annual inspection of drive belt tension (if applicable), cleaning of dust from ventilation grilles, and verification of tray leveling using a spirit level—no lubrication or calibration is needed.
Is the HY-6A compliant with CE or UL safety marks?
It carries CCC (China Compulsory Certification) but does not bear CE, UL, or UKCA markings; users outside China must verify local import and electrical safety requirements prior to deployment.