- All
- Favorite
- Popular
- Most rated
| Brand | Kegge |
|---|---|
| Origin | Germany |
| Model | proTens |
| Maximum Load Capacity | 250 kN |
| Drive System | Dual-arm screw-driven with solid-state servo and electric control |
| Load Resolution | 120,000 counts |
| Load Accuracy | Class 1 per DIN EN ISO 7500 (0.4–100% of full scale) |
| Test Speed Range | 0.01–2000 mm/min |
| Motor Power Options | 300 W or 900 W |
| Software Interface | Human-centered, compliant with GLP/GMP data integrity requirements |
| Safety Features | Adjustable overload shutdown, quick-release sensor & grip system, precision crosshead guidance |
| Sample Compatibility | Metals, plastics, elastomers, foams, paper, wood, textiles, wires, and finished components |
| Test Modes | Tension, compression, bending, shear, peel |
| Brand | Kegge |
|---|---|
| Origin | Germany |
| Model | smarTens |
| Load Capacity | 20 kN |
| Load Accuracy | Class 1 per DIN EN ISO 7500 (optional Class 0.5) |
| Crosshead Positioning Accuracy | < 1 µm |
| Speed Range | 0.01–1000 mm/min |
| Control System | Solid-state servo motor with dual-arm screw drive |
| Software | Integrated PC-based control and analysis platform |
| Compliance | DIN EN ISO 7500-1, ASTM E4, ASTM E8/E21, ISO 6892-1, ISO 178, ISO 14129, ISO 14130 |
| Sample Compatibility | Metals, plastics, elastomers, foams, paper, wood, textiles, composites, wire, finished components |
| Safety Features | Adjustable overload cutoff, quick-release load cell & fixture interface, precision crosshead guidance system |
| Brand | Kaelge |
|---|---|
| Origin | Germany |
| Model | IMPact 5.5/15(25) |
| Impact Energy Range | 0.5–5.5 J (IMPact 5.5) |
| Compliance Standards | EN ISO 179, EN ISO 180, ASTM D 256 (Methods A & B), ISO 8256 |
| Test Configurations | Charpy (simply supported beam), Izod (cantilever beam), Tensile Impact |
| Control System | Microprocessor-based with keypad and LCD display (4-language support) |
| Output Interfaces | RS-232 serial port, parallel printer port |
| Key Functions | Automatic pendulum braking, built-in sample centering for Charpy fixtures, real-time energy calculation (absorbed energy, recovered elastic energy, rise angle, impact velocity), on-access auto-test initiation, pendulum calibration verification and report generation, FIFO storage of up to 50 test results with statistical evaluation (mean, standard deviation) |
| Brand | KARG |
|---|---|
| Origin | Germany |
| Instrument Type | Free-Fall Dart Impact Tester |
| Standards Compliance | ASTM D1709, ISO 7765-1 |
| Impact Energy Range | As per manufacturer’s specification sheet |
| Impact Velocity | As per manufacturer’s specification sheet |
| Dart Mass Options | Standardized (e.g., 50 g, 100 g, 200 g) per ASTM/ISO |
| Maximum Drop Height | Adjustable up to 2,000 mm (typical range) |
| Load Cell Capacity | Configurable (e.g., ±500 N full scale) |
| Test Mode | Single-dart or multi-dart statistical mode (50% failure threshold determination) |
| Data Output | Analog + digital (RS-232 / USB) |
| Safety Enclosure | Interlocked transparent polycarbonate shield |
| Brand | VMI |
|---|---|
| Origin | Netherlands |
| Model | LAT-100 |
| Instrument Type | Multi-Functional Tribological Tester |
| Normal Load Range (Fz) | 10–140 N |
| Lateral Force Range (Fy) | −120 to +120 N |
| Friction Force Range (Fx) | 5–100 N |
| Speed Range (Low) | 0.002–2 km/h |
| Speed Range (High) | 2–100 km/h |
| Slip Angle Range | −45° to +45° |
| Mass Measurement Range | 220 g |
| Surface Temperature Range | −18°C to +150°C |
| Water Temperature Range | 1°C to 80°C |
| Cryo Temperature Range (with optional Kryo module) | −30°C to +80°C |
| Abrasion Disc Diameter | 350 mm |
| Abrasion Disc Thickness | 25 mm |
| Disc Materials | Al₂O₃ (EKW 60, EKW 180), SGG Glass |
| Dual-Sided Discs | Yes |
Show next