- All
- Favorite
- Popular
- Most rated
| Brand | Käser |
|---|---|
| Origin | Germany |
| Model | Strip Cutter |
| Cutting Capacity | Up to 10 parallel strips per pass |
| Strip Length | 230 mm |
| Adjustable Strip Width | 10 mm, 15 mm, or custom widths per standard |
| Cutting Angle | Adjustable |
| Blade Exchange | Quick-release, tool-free mechanism |
| Dimensions (W×H×D) | 420 × 340 × 290 mm |
| Weight | 29 kg |
| Compliance | Designed for DIN, ISO, and ASTM specimen preparation protocols |
| Brand | Unchained Labs |
|---|---|
| Origin | USA |
| Model | Big Kahuna |
| Reaction Pressure Range | 0–400 PSI |
| Reaction Temperature Range | −15 to 150 °C |
| Catalyst Bed Volume | 5–25 mL |
| Liquid Handling | Automated reagent dispensing for solids, liquids, slurries, and viscous materials |
| pH Monitoring & Control | Real-time in-line pH sensing with automated titrant addition |
| Platform Integration | Simultaneous heating, cooling, stirring, suspension, precipitation, evaporation, and gas handling |
| Brand | Unchained Labs |
|---|---|
| Origin | USA |
| Model | Screening Pressure Reactor (SPR) |
| Reactor Type | High-Throughput Parallel Pressure Reactor |
| Vessel Capacity | 1–6 mL per chamber |
| Maximum Operating Pressure | 200 bar |
| Temperature Range | Ambient to 400 °C |
| Chamber Configurations | 24-, 48-, or 96-position modular array |
| Gas/Liquid Flow Control | 0–1 L/min |
| Construction Material | Electropolished Stainless Steel (316L) |
| Sealing Architecture | Single-point clamshell high-pressure seal |
| Vacuum Capability | ≤ 1 mbar (base vacuum), compatible with inert gas purging and pressurization up to 200 bar |
| Brand | Elastocon |
|---|---|
| Origin | Sweden |
| Model | ET 03 |
| Temperature Range | –10 °C to –45 °C |
| External Noise Level | <51 dB(A) |
| Insulation | High-efficiency polyurethane foam |
| Interior Volume | 32 L |
| Exterior Dimensions (W×D×H) | 460 × 520 × 850 mm |
| Ambient Temperature Stability | ±0.5 °C under standard lab conditions (20–25 °C, <60% RH) |
| Power Supply | 230 V AC, 50/60 Hz |
| Energy Class | A+ |
| Compliance | CE, RoHS, IEC 61000-6-3 (EMC), IEC 61000-6-1 (Immunity) |
| Brand | Unchained Labs |
|---|---|
| Origin | USA |
| Model | MIPS |
| Temperature Range | −20 °C to 180 °C |
| Temperature Control Accuracy | ±1 °C |
| Reaction Units | 24 / 48 / 96 wells |
| Reaction Volume Capacity | 0–125 mL |
| Liquid Dispensing | 4-channel variable-pitch pipettor (9 / 13 / 30 mm) |
| Viscosity Handling | 1–1000 cP |
| Solid Dispensing | Powderium™ hopper (10–100 mL), SV vial (4 mL) |
| Balance Range | 0.0001–1200 g |
| Imaging Resolution | 1032 × 779 pixels |
| Stirring Speed | up to 750 rpm |
| Vibration Frequency | 50/60 Hz |
| Cap Sealing Range | vials 2–250 mL, height 32–86 mm |
| Brand | Unchained Labs |
|---|---|
| Origin | USA |
| Model | OSR (Optimization Sampling Reactor) |
| Reactor Type | High-Throughput Parallel Flow Reactor |
| Vessel Material | 316 Stainless Steel |
| Operating Pressure Range | Ambient to 400 PSI |
| Temperature Range | 20 °C to 200 °C |
| Individual Vessel Volume | 7–25 mL |
| Number of Parallel Stations | 8 |
| Vacuum Capability | Up to 400 PSI (gauge, positive pressure mode) |
| Control Architecture | Integrated LEA Software Platform |
| Compliance | Designed for GLP-compliant workflows with audit-trail-enabled data capture |
| Brand | KARG |
|---|---|
| Origin | Germany |
| Model | C4U / C2U |
| Type | Precision CNC Milling Cutter for Specimen Preparation |
| Axes | 3-axis (X, Y, Z) with T-slot milling table |
| Worktable Dimensions | Standard large-format T-slot surface (compatible with ISO/ASTM fixture systems) |
| Fixturing | Quick-release clamping system for plates, semi-finished components, pipes, and notched specimens |
| Control | Microprocessor-based CNC controller with integrated CAD/CAM software interface |
| Compliance | Designed to support ISO 178, ISO 527, ASTM D638, ASTM D256, and EN ISO 13477 specimen geometry requirements |
| Brand | Avantium |
|---|---|
| Origin | Netherlands |
| Model | Flowrence® |
| Maximum Operating Pressure | 200 bar |
| Maximum Operating Temperature | 850 °C |
| Catalyst Bed Volume | 25–1000 µL |
| Number of Parallel Reactors | 16 (4 modules × 4 reactors) |
| Reactor Inner Diameter | 2.0–2.6 mm |
| Isothermal Zone Length | 5–15 cm (standard), up to 50 cm (custom) |
| Feed Configuration | Up to 5 gases + 2 liquids |
| Catalyst Form | Extrudates (intact or crushed) |
| Downstream Phase Separation | Capillary-free gas–liquid separation |
| Automated Liquid Sampling | Integrated |
| Temperature Control | Independent per module (4 zones) |
| Brand | Farrel |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CPeX™ |
| Pricing | Available Upon Request |
| Brand | KARG |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AKM |
| Quotation | Upon Request |
| Blade Travel Speed | 0–800 mm/s |
| Stroke Length | 208 mm |
| Notch Type | V-Notch |
| Feed Rate (Notching) | 0.01–0.3 mm/rev |
| (Fine Adjustment) | 0.01–0.1 mm/rev |
| Saw Cutting Speed | 0.3–1 m/min |
| Saw Rotational Speed | 1000–2000 rpm |
| Notch Depth (Z-axis) | 0.01–0.25 mm |
| Machining Length | ~200 mm |
| Width | 1200 mm |
| Height | 700 mm |
| Depth | 540 mm |
| Weight | 150 kg |
| Power Consumption | ~1 kW |
| Supply Voltage/Frequency | 230 V / 110 V, 50/60 Hz |
| Brand | Karg |
|---|---|
| Origin | Germany |
| Model | MPS 75 / MPS 150 |
| Max Punching Force | 7,500 N (MPS 75) / 15,000 N (MPS 150) |
| Max Stroke | 40 mm |
| Table Dimensions | 250 × 150 mm |
| Weight | 50 kg |
| Footprint (W×D) | 250 × 240 mm (MPS 75) / 250 × 300 mm (MPS 150) |
| Operation | Lever-Actuated or Pneumatic Option Available |
| Compliance | Configurable for ISO 179, ISO 180, ASTM D6110, ASTM D5041, ISO 13802 Notch Geometries |
| Brand | KaiGe |
|---|---|
| Origin | Germany |
| Model | MAK / MOK |
| Type | Manual/Electric Linear Notching Machine for Charpy/Izod Impact Test Specimens |
| Compliance | ASTM E23, ISO 148-1, ISO 180, DIN 53438, EN ISO 179-1 |
| Max Specimen Height | 30 mm |
| Tool Positioning Tolerance | < 0.01 mm |
| Feed Resolution | 0.001 mm (selectable) |
| MAK Cutting Speed | ~0.3 m/s |
| MOK Cutting Speed | up to 20 m/min |
| Power Supply | 230 V / 50 Hz |
| MOK Power Consumption | 0.4 kVA |
| Dimensions (W×H×D, mm) | MAK: 470 × 215 × 220 |
| MOK | 470 × 540 × 470 |
| Weight | MAK: 16 kg |
| MOK | 43 kg |
| Max Simultaneous Specimens | 7 |
| Safety | Integrated Polycarbonate Shield with Interlocked Safety Switch (MOK only) |
| Tool System | Interchangeable Carbide-Tipped Notching Cutters (V-notch: 45° ± 0.5°, root radius 0.25 mm ± 0.025 mm |
| U-notch | 1 mm ± 0.05 mm radius) |
| Brand | Admatec |
|---|---|
| Country of Origin | Netherlands |
| Model | Admaflex 130 |
| Build Volume Options | 64 × 40 × 400 mm (25 μm layer) / 90 × 56 × 400 mm (35 μm) / 102 × 64 × 400 mm (40 μm) / 128 × 80 × 400 mm (50 μm) / 160 × 100 × 400 mm (62.5 μm) |
| Layer Thickness | 10–200 µm |
| Light Engine | DLP (WQXGA, 2560 × 1600 px) |
| Compatible Materials | Alumina, Zirconia, Fused Silica, Hydroxyapatite, Alumina-Toughened Zirconia, Stainless Steel 316L, Inconel 625, Stainless Steel 17-4PH, Copper |
| Final Part Density | >99% |
| System Dimensions | 980 × 670 × 1880 mm |
| Weight | ~300 kg |
| Operating Temperature | 22 ± 5 °C |
| Relative Humidity | <40% |
| Power Supply | 110/230 V |
| Input File Formats | STL, SLC |
Show next