Jianhu
Filter
Showing 61–90 of 440 results
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JDZD-TF |
| Vibration Mode | Vertical Only |
| Frequency Range | 1–400 Hz |
| Max. Load Capacity | 100 kg |
| Peak-to-Peak Amplitude | 0–5 mm |
| Acceleration Capability | Up to 20 g (peak) |
| Waveform | Sinusoidal |
| Control Mode | Programmable Sine, Sweep (Linear/Logarithmic), Amplitude Modulation, Time-Based Test Sequencing |
| Drive Power | 2.2 kW |
| Table Size | 50 cm × 50 cm |
| Input Voltage | 220 V ±20% |
| Compliance | GB/T 2423.10, IEC 60068-2-6 (Fc), JJG 189–1997, GB/T 13309–1991 |
| Software Interface | PC-based control with data logging and test report generation |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Type | Electrodynamically Driven 6-Axis Vibration Shaker |
| Rated Thrust | 0–900 kgf |
| Frequency Range | 1–600 Hz (display resolution: 0.01 Hz, accuracy: ±0.1 Hz) |
| Max. Test Load | 100 kg |
| Table Dimensions | 500 mm × 500 mm × 10 mm (L×W×H) |
| Peak Acceleration | 20 g (rms up to 14.1 g) |
| Displacement (p-p) | 0–5 mm |
| Power Consumption | 3.3 kW |
| Input Voltage | 220 V ±20% |
| Communication Interface | RS-485 |
| Compliance | Designed per ISO 5344, IEC 60068-2-6, and ASTM D999 test standards |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Electrodynamic Vibration Shaker |
| Rated Thrust | 2000 kgf |
| Frequency Range | 1–600 Hz / 1–3000 Hz / 1–5000 Hz (±0.1%) |
| Max Test Load | 0–100 kg |
| Table Dimensions | 500 × 6 × 500 mm |
| Max Acceleration | 0–20 g (0–196.2 m/s²) |
| Peak Sine Force | 2000 kgf |
| Displacement (p-p) | 0–5 mm |
| Programmable Segments | 15 |
| Precision | 0.01 Hz frequency resolution |
| Power Supply | 220 V ±20%, 50/60 Hz |
| Input Current | ≤10 A |
| Motor Power | 2.2 kW |
| Cooling | Natural Air Cooling |
| Operating Environment | –10 °C to +60 °C, 10–95% RH |
| Sound Pressure Level | ≤60 dB(A) |
| Magnetic Field Emission | ≤110 mG at 1 m |
| Communication Interface | RS-485 |
| Optional Accessories | Acceleration/Displacement Sensor Kit, Full PC Control Software Suite |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH |
| Impact Velocity | 2.9–3.8 m/s |
| Impact Energy Range | 0.5, 1.0, 2.0, 4.0, 5.0, 7.5, 15.0, 25.0, 50.0 J |
| Pendulum Pre-lift Angle | 150° |
| Distance from Pivot to Strike Center | 230 mm / 395 mm |
| Specimen Support Span (Clamp Spacing) | 40, 60, 62, 70, 95 mm |
| Impact Blade Radius | R2.0 mm ± 0.5 mm |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions (L×W×H) | 550 × 300 × 900 mm |
| Net Weight | 145 kg |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JH |
| Price | USD 7,100 (Deposit Only – Final Quotation Upon Specification Confirmation) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-Battery-CL |
| Temperature Range | -70°C to +150°C |
| Refrigeration | Compressor-based |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5°C |
| Temperature Uniformity | ±2.0°C |
| Temperature Deviation | ±2.0°C |
| Heating Rate | ≤60 min (from 25°C to +150°C) |
| Cooling Rate | ≤45 min (25°C to -40°C), ≤60 min (25°C to -55°C), ≤80 min (25°C to -70°C) |
| Internal Chamber Dimensions | Customizable |
| Compliance | ISO 17025-supporting test environment, GLP-compliant operation architecture, meets IEC 62133 & UN 38.3 thermal preconditioning requirements |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Instrument Manufacturer |
| Country of Origin | China |
| Model | JH Series Dielectric Breakdown Tester |
| Price Range | USD 700 – 7,000 (FOB Shanghai) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH Series Dielectric Breakdown Voltage Tester |
| Voltage Range | Up to 100 kV (configurable) |
| Measurement Accuracy | ±0.5% for voltage, ±1% for current |
| Channel Capacity | 2–8 independent parallel test channels |
| Compliance | IEC 60243-1, ASTM D149, GB/T 1408.1, ISO 60243 |
| [Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Manufacture | China |
| Model | JH Series Dielectric Strength Tester |
| Price Range | USD 850 – 8,500] |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic (China-Made) |
| Model | JH Series Dielectric Withstand Voltage Tester & Battery Dielectric Breakdown Strength Analyzer |
| Price Range | USD 2,800 – 28,000 |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH / JH-4256 |
| Drop Height Range (Single-Arm) | 30–150 cm |
| Base Plate Dimensions | 120 × 140 cm (W × D) |
| Max Specimen Size | 100 × 80 × 100 cm |
| Impact Panel Size | 170 × 120 × 2 cm |
| Motor Power | 1.85 kW |
| Overall Dimensions (Single-Arm) | 170 × 120 × 230 cm |
| Drop Height Accuracy | ±1 cm |
| Levelness Tolerance of Drop Surface | ≤1 mm |
| Weight | 600 kg |
| Power Supply | AC 220 V, 50 Hz (Single-Arm) |
| Dual-Arm Height Range | 40–150 cm |
| Dual-Arm Load Capacity | ~60 kg |
| Dual-Arm Drive | Motorized height adjustment |
| Dual-Arm Motor Rating | 0.5 HP |
| Mobile Phone Tester Actuation | Pneumatic release mechanism |
| Compliant Standards | IEC 60068-2-32, GB/T 2423.8, JIS C 0044 |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic Instrumentation |
| Model | JH-Dielectric Strength & Resistivity Analyzer |
| Price Range | USD 650 – 65,000 |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH Series |
| Temperature Range | Consult Technical Support |
| Temperature Uniformity & Stability | Consult Technical Support |
| Heating/Cooling Ramp Rates | Consult Technical Support |
| Control Accuracy | Consult Technical Support |
| Construction | Inner chamber – 1.2 mm 304 stainless steel brushed finish |
| Compliance | Designed to support ISO 16750-4, IEC 60068-2-1, IEC 60068-2-2, MIL-STD-810H (Temperature), ASTM D3418, and GLP/GMP-aligned validation protocols |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JH |
| Quotation | Upon Request |
| Max Operating Temperature | 300–400 °C |
| Vacuum Performance | ≤5×10⁻² Torr |
| Temperature Uniformity | ±2.0% |
| Voltage | 220 V AC |
| Power Rating | 12 kW |
| Internal Construction | SUS304 Stainless Steel |
| External Construction | SECC Steel with Powder-Coated Finish |
| Filtration | Integrated ISO Class 1000 (1,000 particles/ft³ ≥0.5 µm) Clean Air Recirculation |
| Control System | PID Microprocessor with PV/SV Dual Display, SSR-Driven Heating |
| Safety Systems | Independent Over-Temperature Cut-Off, Self-Diagnostic Routine, Overload Auto-Disconnection |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH Series |
| Type | General-Purpose Forced-Air Drying Oven |
| Temperature Range (Standard) | RT + 10 °C to 250 °C |
| Temperature Range (High-Temp Option) | RT + 10 °C to 300 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±1 °C |
| Power Input | 850 W – 2450 W (model-dependent) |
| Chamber Volume | 30 L – 220 L |
| Interior Material | Mirror-Finish Stainless Steel (AISI 304) |
| Door | Double-Glazed Observation Window with Silicone Rubber Seal |
| Control System | Microprocessor-Based PID Controller with Timer (up to 9999 min), Optional LCD Programmable Controller |
| Compliance | Designed for GLP-compliant environments |
| Safety | Independent Over-Temperature Cut-Off Protection (optional) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH |
| Power Supply | 220 V / 50 Hz or 380 V / 50 Hz |
| Temperature Range | RT+10°C to 250°C |
| Temperature Uniformity | ±1°C |
| Control Accuracy | ±1% of full scale |
| Timer Range | 1–9999 min |
| Chamber Volume | 30 L to 420 L (model-dependent) |
| Interior Material | Mirror-finish stainless steel (AISI 304) |
| Exterior Material | Powder-coated cold-rolled steel |
| Heating Power | 550 W to 4000 W |
| Operating Ambient | +5°C to +40°C |
| Shelves | 2 standard adjustable stainless-steel shelves |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH Series |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-Based Cooling |
| Explosion-Proof Configuration | Available |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from 25 °C to +150 °C) |
| Cooling Rate | ≤45 min / ≤60 min / ≤80 min (from 25 °C to -70 °C, depending on configuration) |
| Compliance | Designed to support ISO 17025, IEC 60068-2, MIL-STD-810, ASTM D4332, and GB/T 2423 environmental test standards |
| Software Interface | Optional Ethernet/RS485 connectivity with audit-trail-capable test logging per FDA 21 CFR Part 11 requirements |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH Series |
| Temperature Range | -70°C to +150°C |
| Ramp Rate | Up to 10°C/min (typical) |
| Compliance | ISO 16750-4, IEC 60068-2-14, ASTM D3418, GB/T 2423.22 |
| Control System | PID-based digital controller with touch-screen HMI |
| Chamber Construction | Double-wall insulated stainless steel interior, high-efficiency refrigeration system with cascade compressor staging |
| Safety Features | Over-temperature protection, door interlock, refrigerant leak detection, emergency stop |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH Series |
| Price | Upon Request |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-Based Cooling |
| Explosion-Proof Design | Yes |
| Temperature Stability | Contact technical support for specification sheet |
| Temperature Uniformity | Contact technical support for specification sheet |
| Temperature Deviation | Contact technical support for specification sheet |
| Ramp Rates (Heating/Cooling) | Contact technical support for specification sheet |
| Internal Chamber Dimensions | Contact technical support for specification sheet |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | JH Series |
| Quotation | Available Upon Request |
| Temperature Range | -70 °C to +150 °C |
| Refrigeration Method | Compressor-Based Cooling |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | Consult Technical Support |
| Temperature Deviation | ±2.0 °C |
| Heating Rate & Cooling Rate | Customizable per chamber configuration |
| Internal Chamber Dimensions | Configurable (Standard & Custom Options Available) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-9050A / JH-9100A / JH-9200A / DJH-30L–DJH-1000L Series |
| Max Temperature | 400 °C (JH-A series) / 300 °C (DJH-L/M series) |
| Temperature Range | RT+10 °C to 400 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±1 °C |
| Power Supply | 220 V / 50 Hz (models ≤220 L), 380 V / 50 Hz (models ≥420 L) |
| Internal Volume | 30 L to 1000 L |
| Construction | Mirror-finish stainless steel inner chamber, powder-coated carbon steel outer casing |
| Air Circulation | Vertical forced convection with high-temp-rated imported centrifugal blower |
| Viewing Window | Double-layer tempered glass |
| Standard Shelving | 2–5 adjustable stainless steel trays |
| Timer Range | 1–9999 minutes |
| Compliance | Designed for GLP/GMP-aligned laboratory and industrial aging validation workflows |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH Series |
| Temperature Range | -70°C to +150°C |
| Control Accuracy | ±0.5°C |
| Uniformity | ±2.0°C |
| Ramp Rate | Programmable (Typical: 3–5°C/min) |
| Compliance | ISO 16750-4, IEC 60068-2-14, GB/T 2423.22, MIL-STD-810H Method 503.5 |
| Construction | Double-wall insulated stainless steel chamber with PID-controlled refrigeration/heating system |
| Controller | 7-inch color touchscreen HMI with Ethernet/USB interface |
| Data Logging | Internal SD card + optional cloud sync |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH Series (e.g., JHC-250BP-2L, JHC-350HP-2L, JHC-450BP-2L) |
| Temperature Range | 0–50°C (dark), 10–50°C (with illumination) |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ±1.5°C (250L), ±2°C (350/450L) |
| Temperature Stability | ±1°C |
| Humidity Range | 50–90% RH |
| Humidity Control Accuracy | ±5–7% RH |
| Illumination Intensity | 0–12,000 lx / 0–20,000 lx / 0–25,000 lx (model-dependent) |
| Programmability | 30-segment cycle, 1–99 h per segment |
| Refrigerant | R134a (CFC-free) |
| Compressor Configuration | Dual independent international-brand compressors with auto-rotating duty cycling |
| Power Input | 860–2100 W (model-dependent) |
| Internal Dimensions (W×D×H mm) | 580×510×835 / 520×550×1140 / 700×550×1140 |
| Standard Shelving | 3–4 adjustable stainless-steel shelves |
| Interface | RS485 port for PC connectivity and remote monitoring |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Manufacturer (Not Distributor) |
| Product Category | Domestic |
| Model | JH-Programmable Temperature & Humidity Chamber |
| Price Range | USD 1,100 – 110,000 |
| Instrument Type | Upright Vertical Chamber |
| Condensation Method | Air-Cooled |
| Temperature Range | 15–45°C |
| Humidity Range | 30–98% RH |
| Temperature Uniformity | ±1°C |
| Temperature Fluctuation | ±1°C (High Temp), ±2°C (Low Temp) |
| Temperature Deviation | ≤±2°C |
| Humidity Uniformity | ±3% RH |
| Humidity Fluctuation | ±3% RH |
| Humidity Deviation | ≤±3% RH |
| Heating Rate | 1.0–3.0°C/min |
| Cooling Rate | Not Specified |
| Internal Chamber Dimensions | Custom Configurations Available (Consult Technical Support) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor & OEM Partner |
| Product Category | Domestic (China-Made) |
| Model | JH Series Vacuum Photoresist Oven |
| Price Range | USD 1,350 – 13,500 (FOB Shanghai) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | JH Series Semiconductor PI Curing Oven |
| Price Range | USD 900 – 9,000 |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH Series |
| Chamber Type | Upright |
| Cooling Method | Air-Cooled |
| Temperature Range | 15–45 °C |
| Humidity Range | 30–98 % RH |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±1 °C (high-temp), ±2 °C (low-temp) |
| Humidity Uniformity | ≤ ±3 % RH |
| Humidity Fluctuation | ±3 % RH |
| Heating Rate | 1.0–3.0 °C/min |
| Compliance | ISO 17025-supporting operation, GLP/GMP-ready configuration options, ASTM D4332, IEC 60068-2-30, GB/T 10586, GB/T 2423.3 & 2423.4 |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH Series |
| Chamber Type | Upright |
| Cooling Method | Air-Cooled |
| Temperature Range | 15–45 °C |
| Humidity Range | 30–98 % RH |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±1 °C (high temp), ±2 °C (low temp) |
| Humidity Uniformity | ≤ ±3 % RH |
| Humidity Fluctuation | ±3 % RH |
| Heating Rate | 1.0–3.0 °C/min |
| Compliance | ISO 17025-supportive design, GLP/GMP-ready configuration options, ASTM D4332, IEC 60068-2-30, GB/T 10586, GB/T 2423.3 & 2423.4 |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH Series |
| Chamber Type | Upright |
| Cooling Method | Air-Cooled |
| Temperature Range | –70°C to +150°C |
| Humidity Range | 10–98% RH |
| Temperature Uniformity | ±1°C |
| Temperature Stability | ±0.5°C (typical), ±1°C (high-temp), ±2°C (low-temp) |
| Humidity Uniformity | ±3% RH |
| Humidity Stability | ±3% RH |
| Heating Rate | 1.0–3.0°C/min |
| Compliance | ISO 16750-4, ASTM D4332, IEC 60068-2-1/2/14/30, GB/T 10586, GB/T 2423.1–2423.3 |
| Customization | Fully configurable chamber volume, internal configuration, control logic, data logging, and interface protocols (Modbus TCP, RS485, Ethernet/IP) |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JH Series |
| Instrument Type | Upright Chamber |
| Cooling Method | Air-Cooled |
| Temperature Range | 15–45 °C |
| Humidity Range | 30–98 % RH |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±1 °C (high-temp), ±2 °C (low-temp) |
| Humidity Uniformity | ≤ ±3 % RH |
| Humidity Fluctuation | ±3 % RH |
| Heating Rate | 1.0–3.0 °C/min |
| Customization | Available |
| Compliance | ISO 9001 certified, supports GLP/GMP-aligned validation protocols |