Jianhu
Filter
Showing 91–120 of 440 results
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH Thermal Shock Test Chamber |
| Pricing | Available Upon Request |
| High-Temperature Range (°C) | Customizable per application requirements |
| Low-Temperature Range (°C) | Customizable per application requirements |
| Thermal Shock Range (°C) | Configurable based on chamber design |
| Temperature Stability (°C) | ±0.5 °C typical (subject to calibration and load conditions) |
| Heating Rate (°C/min) | Up to 30 °C/min (standard configuration) |
| Cooling Rate (°C/min) | Up to 25 °C/min (standard configuration) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JH-Thermal Shock Test Chamber |
| Price Range | USD 790 – 7,900 (FOB Shanghai) |
| Temperature Range | -70°C to +150°C |
| Refrigeration Method | Dual-stage Mechanical Compression |
| Explosion-Proof Version | Available |
| Temperature Fluctuation | ±0.5°C |
| Temperature Uniformity | ±2.0°C (per IEC 60068-3-5) |
| Temperature Deviation | ±2.0°C (per ISO 16750-4) |
| Ramp Rate (Heating) | ≤60 min (from -40°C to +125°C) |
| Ramp Rate (Cooling) | ≤45–80 min (model-dependent, per ASTM D573) |
| Internal Chamber Dimensions | Customizable (Standard Options: 150 L / 300 L / 600 L) |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH Thermal Shock Test Chamber |
| Temperature Range | Consult for High/Low/Temperature Transition Specifications |
| Temperature Stability | ±0.5 °C (typical for industrial-grade dual-zone chambers) |
| Ramp Rate | ≥10 °C/min (typical for air-based two-chamber systems) |
| Configuration | Dual-Chamber (Hot/Cold) with Static Test Zone |
| Compliance | Designed to meet ASTM D5229, ISO 16750-4, MIL-STD-810H Method 503.5, IEC 60068-2-14, GB/T 2423.22 |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH Thermal Shock Test Chamber |
| Temperature Range (High) | Consult for specification |
| Temperature Range (Low) | Consult for specification |
| Transfer Time | Standardized rapid basket transfer (< 10 s typical) |
| Control System | PID-based digital temperature controller with dual-sensor feedback |
| Construction | Stainless steel inner chamber, high-density polyurethane insulation, reinforced structural frame |
| Compliance | Designed to support ASTM D5229, ISO 11357-6, MIL-STD-810H Method 503.5, IEC 60068-2-14, GB/T 2423.22 |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-Series |
| Temperature Range (High) | +60°C to +200°C |
| Temperature Range (Low) | −70°C to 0°C |
| Thermal Shock Range | −60°C to +150°C |
| Temperature Stability | ±0.5°C to ±2.0°C |
| Heating Rate | 3–20°C/min |
| Cooling Rate | 3–15°C/min |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JH-VTH-A / VTH-B / VTH-C |
| Temperature Range | −70.0 °C to +150.0 °C (optional +180.0 °C) |
| Humidity Range | 10.0 %RH to 98.0 %RH |
| Internal Dimensions (W×H×D) | 500×600×870 mm / 600×800×870 mm / 1000×800×870 mm |
| Vibration Frequency Range | 3 Hz to 2000 Hz (up to 4000 Hz) |
| Max. Vibration Amplitude | 0–20 mm (up to 40 mm) |
| Max. Dynamic Thrust | 100–1200 kgf (up to 2000 kgf) |
| Control System | THS-2001 Microcontroller (10,000-segment programmable) |
| Cooling Medium | HFC-based eco-refrigerant with French Servo Valve regulation |
| Low-Humidity Capability | 10.0 %RH via LHC regenerative desiccant system |
| Cryogenic Option | LN2V liquid nitrogen rapid cooling module |
| Data Interface | DATA PHYSICS DP-540 PC-compatible control and acquisition system |
| Compliance Support | ASTM D4332, MIL-STD-810H, IEC 60068-2, ISO 16750-4, GB/T 2423.1–2423.10 |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH UV Aging Test Chamber |
| Quotation | Upon Request |
| Humidity Range | ≥95% RH (in-chamber actual value) |
| UV Lamp Power | 40 W per lamp |
| Irradiance Range | 0.72 W/m² |
| Exposure Time Setting | 1–9999 hours (adjustable) |
| Illuminated Surface Temperature Range | Available upon technical consultation |
| Black Panel Temperature Range | Available upon technical consultation |
| UV Wavelength | Available upon technical consultation |
| Chamber Internal Dimensions (L×W×H) | Available upon technical consultation |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-6052 / JH-6090 / JH-6210 / JH-6250 / JH-6050 / JH-6051 / JH-6021 / JH-6020 |
| Voltage | 220 V / 380 V, 50 Hz |
| Power Input | 500 W – 4000 W |
| Temperature Range | RT +10 °C to 250 °C |
| Temperature Resolution / Uniformity | 0.1 °C / ±1 °C |
| Ultimate Vacuum | ≤133 Pa |
| Chamber Material | Stainless Steel (selected models) or Cold-Rolled Steel |
| Internal Dimensions (W×D×H, mm) | 300×300×275 to 700×600×600 |
| External Dimensions (W×D×H, mm) | 580×450×450 to 1050×760×910 |
| Shelf Quantity | 1–3 stainless steel shelves |
| Operating Ambient Temperature | +5 °C to +40 °C |
| Optional Accessories | Programmable LCD Controller, 2 L/s Vacuum Pump, Stainless Steel Foot Stand, High-Temperature Liquid Water Trap, Desiccation Canister |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH Series |
| Temperature Range | RT+10°C to 250°C (model-dependent) |
| Vacuum Level | ≤133 Pa |
| Chamber Material | Stainless Steel (AISI 304 standard) |
| Control System | Microprocessor-based PID temperature controller with timer function |
| Power Supply | 220 V, 50 Hz |
| Internal Dimensions (W×D×H mm) | Up to 730×560×550 |
| Vacuum Seal | Molded silicone gasket with adjustable door tension |
| Viewing Window | Dual-layer tempered glass with inert gas purge port |
| Compliance | Designed for GLP-compliant drying protocols |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Industrial Equipment Supplier |
| Product Category | Domestic |
| Model | JH Series Vacuum Inert-Atmosphere PI Curing Oven |
| Price Range | USD 950 – 95,000 |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor & OEM Manufacturer |
| Regional Classification | Domestic (PRC) |
| Model | JH |
| Pricing | Upon Request |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH Series Walk-in Environmental Test Chamber / JH Walk-in Laboratory |
| Price Range | USD 140 – 42,000 (FOB Shanghai) |
| Internal Dimensions (D×W×H) | Customizable per project specification |
| Temperature Range | −70 °C to +150 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Control Stability | ≤ ±2.0 °C |
| Heating Rate | 1–3 °C/min |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JH Series Walk-in Environmental Test Chamber |
| Price Range | USD 1,100 – 115,000 (FOB Shanghai) |
| Internal Dimensions (D×W×H) | Customizable upon request |
| Temperature Range | −50 °C to +150 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Control Resolution | 0.1 °C |
| Heating Ramp Rate | Up to 3 °C/min |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH |
| Drop Height Range | 300–1500 mm |
| Max. Test Weight | 80 kg |
| Max. Test Dimension | 800 × 1000 × 1000 mm |
| Base Plate Size | 1700 × 1200 × 14 mm |
| Frame Height Accuracy | ±5 mm |
| Levelness Tolerance of Drop Surface | <1° |
| Height Sensing | High-Resolution Rotary Encoder (Japan SP) |
| Main Motor | 1.85 kW (Yasba, Taiwan) |
| Reset Motor | Kosen, Taiwan |
| Control Instrument | Proprietary Digital Height Controller |
| Structural Column | Precision-Ground & Chrome-Plated Steel |
| Electrical Components | Omron (Japan) |
| Drive Chain | ST, Taiwan |
| Timing Belt | Rongfeng, Taiwan |
| Gearmotor | Hangsu, China |
| Power Supply | 380 V AC, 3 kW |
| Compliance | Designed to support ISO 2248, ASTM D5276, ISTA 1A/2A/3A test protocols |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH |
| Combustion Chamber Volume | 0.5 m³ |
| Sample Dimensions | 125 mm × 13 mm × (3–13) mm |
| Burner Tip ID | 9.5 mm (0.375 in), Length: 100 mm |
| Flame Angle Options | 45° (horizontal), 90° (vertical) |
| Gas Supply | Liquefied Petroleum Gas (LPG) or Natural Gas (37 MJ/m³) |
| Gas Flow Rate | <1 L/min |
| Timing Functions | Pre-ignition, Afterflame, Afterglow, and Flame-Out Duration |
| Actuation | Pneumatic burner positioning, Electric sample height adjustment, Manual horizontal support alignment |
| Construction | Stainless steel enclosure with tempered glass viewing door, internal LED lighting, and integrated exhaust fan |
| Overall Dimensions | 1100 mm × 600 mm × 1050 mm |
| Compliance | UL 94, IEC 60695-11-3, GB/T 2408–1996, GB 4943, GB 5169 |
| Brand | JianHu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JH Walk-in Environmental Test Chamber |
| Pricing | Available Upon Request |
| Internal Dimensions (D×W×H) | Custom-configurable per application |
| Temperature Range | -70°C to +180°C (standard configuration |
| Temperature Uniformity | ±0.5°C (at 1 m from chamber walls, per ISO 16750-4 & IEC 60068-3-5) |
| Control Resolution | 0.1°C / 0.1% RH |
| Ramp Rate | Up to 3°C/min (typical, dependent on load and configuration) |
| Compliance | ISO 16750, IEC 60068, ASTM D4332, MIL-STD-810G, GB/T 2423 |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH |
| Type | Walk-in Environmental Test Chamber |
| Compliance | GB/T 5170.2–5170.6–1995 (IEC 60068-3 series equivalent) |
| Construction | Modular insulated chamber with SUS#304 interior and color-coated steel exterior |
| Refrigeration | Semi-hermetic German-made compressor |
| Humidity System | Steam-based humidification with RO-purified water supply |
| Control Interface | Color TFT touchscreen with programmable logic controller (PLC), multi-segment ramp-soak profiles, real-time fault logging, and timer-based auto-start/stop |
| Humidity Sensing | Capacitive polymer sensor (no wick maintenance, water-free measurement) |
| Control Method | Water vapor partial pressure (WVPP) feedback for stable RH regulation |
| Power Management | Staggered heating/humidification output to limit inrush current |
| Defrost | Hot-gas defrost circuit for uninterrupted low-temperature operation |
| Optional Refrigerant | HFC-based (R404A/R507 compliant |
| Safety | Integrated leakage circuit breaker, emergency egress door latch, dual-channel power interlock for DUT supply, and over-temperature/over-humidity cut-off |
| Standard Accessories | Built-in chart recorder, distilled water generator, and ESS (Environmental Stress Screening) mode preset |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Type | Benchtop Resistance Muffle Furnace |
| Rated Power | 10 kW |
| Rated Voltage | 380/220 V |
| Temperature Range | Ambient to 1200 °C |
| Max Operating Temperature | 1200 °C |
| Chamber Dimensions (W×D×H) | 400 × 250 × 160 mm |
| External Dimensions (W×D×H) | 750 × 440 × 480 mm |
| Net Weight | 110 kg |
| Heating Element | Fe-Cr-Al Alloy Wire |
| Thermocouple Type | K-type (Chromel-Alumel) |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±2 °C (at 1200 °C, steady state) |
| Control System | Microprocessor-based PID controller with auto-tuning, cold-junction compensation, and programmable ramp-soak profiles |
| Communication Interface | RS-232 (optional PC integration) |
| Safety Features | Independent over-temperature cut-off, door-interlocked power disconnect, thermal insulation with ceramic fiber lining |
| Brand | Jianhu |
|---|---|
| Model | JH-100B |
| Temperature Range Options | 0°C to 8°C |
| Refrigeration System | Danfoss compressor + EBM condenser fan |
| Insulation | High-density polyurethane foam |
| Refrigerant | CFC-free / HFC-free |
| Test Port | Φ40 mm |
| Ambient Operating Range | 10°C to 32°C |
| Safety Features | Dual-temperature alarm, sensor fault detection, audible buzzer + visual flashing alert, mechanical door lock |
| Interior Design | Corrosion-resistant stepped stainless steel chamber with basket-compatible structure |
| Compliance Context | Designed for GLP-compliant stability testing and ICH Q1–Q5 environmental stress qualification |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-15L |
| Temperature Range | Ambient +5°C to 95°C |
| Temperature Uniformity | ≤ ±0.05°C |
| Chamber Volume | 15 L |
| Internal Dimensions | 215 × 170 × 200 mm (W × D × H) |
| Circulation Method | Built-in Impeller Stirring System |
| Power Rating | 1500–1800 W |
| Control System | Microprocessor-Based PID Temperature Controller |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Model | JH-200/300 kN |
| Load Capacity | 200 kN / 300 kN |
| Load Measurement Range | 2–100% of full scale |
| Load Accuracy | ±1% or better |
| Effective Tensile Stroke | 650 mm (customizable) |
| Speed Range | 0.05–200 mm/min |
| Speed Accuracy | ±1% |
| Displacement Resolution | 0.01 mm |
| Power Supply | 220 V ±10%, 1 kW |
| Fixture Standard | One set of tensile grips and one set of compression platens |
| Interface Option | RS-232 or USB for external PC connection |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Origin | Domestic (China) |
| Model | JH-2025 Series |
| Price Range | USD 850 – 8,500 |
| Temperature Range | -70°C to +150°C |
| Refrigeration Method | Mechanical Compression |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5°C |
| Temperature Uniformity | ±2.0°C |
| Temperature Deviation | ±2.0°C |
| Heating Rate | ≤60 min (from -40°C to +85°C) |
| Cooling Rate | ≤45 min (from +25°C to -40°C) |
| Working Chamber Dimensions | Customizable (non-standard) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Spray Mode | Continuous Atomization |
| Fog Output | 1–2 mL/80 cm²·hr |
| Nozzle Pressure | 0.7–1.0 kg/cm² |
| De-fogging Method | Pneumatic Air-Compression Exhaust |
| Chamber Material | 316L Stainless Steel Monolithic Construction |
| Temperature Control Range | 35°C ± 0.5°C (standard NSS test) |
| Salt Concentration Accuracy | ±0.1% w/w (5.0% NaCl solution) |
| Humidity Control Range | 45–98% RH |
| Continuous Operation Capability | ≥1000 hours |
| Compliance | ASTM B117, ISO 9227, GB/T 2423.17, GB/T 10587 |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor & OEM Manufacturer |
| Product Category | Domestic |
| Model | JH-2026 |
| Price Range | USD 900 – 9,000 (FOB Shanghai) |
| Temperature Range | −70 °C to +150 °C |
| Cooling Method | Compressor-based Refrigeration |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Temperature Uniformity | ±2.0 °C |
| Heating Rate | ≤60 min (from −40 °C to +150 °C) |
| Cooling Rate | ≤45 min / ≤60 min / ≤80 min (model-dependent, typical from +150 °C to −40 °C) |
| Interior Dimensions | Custom-engineered per client specification |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor & OEM Partner |
| Country of Origin | China |
| Model | JH-2026 |
| Price Range | USD 1,380 – 13,800 (FOB Shanghai) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98% RH |
| Refrigeration | Dual-stage Mechanical Compression System |
| Temperature Uniformity | ±2.0 °C |
| Temperature Stability | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (−40 °C → +85 °C) |
| Cooling Rate | ≤45 min (25 °C → −40 °C), ≤60 min (25 °C → −70 °C), ≤80 min (25 °C → −70 °C with full load) |
| Interior Dimensions | Customizable (Non-Standard Configurations Supported) |
| Construction | 304 Stainless Steel Interior & Exterior Cladding |
| Data Storage | ≥100,000 Test Records (Local SD Card + Optional Cloud Sync) |
| Compliance | ISO 17025-aligned operation |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Manufacturer (Not Distributor) |
| Product Category | Domestic |
| Model | JH-2026 |
| Price Range | USD 700–7,500 (FOB Shanghai) |
| Temperature Range | −70 °C to +150 °C |
| Cooling Method | Dual-Stage Cascade Refrigeration System |
| Explosion-Proof Design | Yes (Optional ATEX/IECEx Compliant Configuration Available) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (−70 °C → +150 °C) |
| Cooling Rate | ≤45 min (25 °C → −70 °C), ≤60 min (150 °C → −40 °C), ≤80 min (150 °C → −70 °C) |
| Interior Dimensions | Customizable per client specification (Standard range: 100–2000 L) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer (Not Distributor) |
| Product Category | Domestic |
| Model | JH-2026 |
| Price Range | USD 900 – 90,000 |
| Temperature Range | −70 °C to +150 °C |
| Cooling Method | Compressor-Based Refrigeration |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (from −40 °C to +85 °C) |
| Cooling Rate | ≤45 min / ≤60 min / ≤80 min (depending on configuration) |
| Interior Dimensions | Customizable |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor & OEM Partner |
| Country of Origin | China |
| Model | JH-2026 |
| Price Range | USD 750 – 7,500 |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration Method | Compressor-Based Cooling |
| Explosion-Proof Design | Yes |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | ≤60 min (−40 °C to +85 °C) |
| Cooling Rate | ≤45–80 min (room temp to −40 °C) |
| Working Chamber Dimensions | Customizable (non-standard configurations available) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor & OEM Manufacturer |
| Country of Origin | China |
| Model | JH-2026 Series |
| Price Range | USD 1,150 – 11,500 (FOB Shanghai) |
| Temperature Range | -70°C to +150°C |
| Cooling Method | Dual-stage Mechanical Compression Refrigeration |
| Explosion-Proof Option | Available (ATEX/IECEx-compliant configuration) |
| Temperature Fluctuation | ±0.5°C |
| Temperature Uniformity | ±2.0°C |
| Temperature Deviation | ±2.0°C |
| Heating Rate | ≤60 min (from -40°C to +85°C) |
| Cooling Rate | ≤45–80 min (from +85°C to -40°C, depending on chamber volume and load) |
| Interior Dimensions | Custom-engineered per client specification (standard range: 100–1000 L) |
| Brand | Jianhu |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor & OEM Manufacturer |
| Country of Origin | China |
| Model | JH-2026 |
| Price Range | USD 700 – 70,000 |
| Chamber Type | Upright |
| Condensation Method | Air-Cooled |
| Temperature Range | 15–45°C |
| Humidity Range | 30–98% RH |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ±1°C (high-temp), ±2°C (low-temp) |
| Humidity Uniformity | ≤ ±3% RH |
| Humidity Fluctuation | ±3% RH |
| Heating Rate | 1.0–3.0°C/min |
| Interior Dimensions | Custom-Engineered per Application Requirements |