JULABO
Filter
Showing 121–150 of 192 results
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | FW95-SL |
| Temperature Range | −95 °C to 0 °C |
| Temperature Stability | ±0.05 °C |
| Heating Power | 3 kW |
| Refrigeration Power (at −80 °C) | 0.36 kW |
| Pump Flow Rate | 22–26 L/min |
| Pump Pressure | 0.4–0.7 bar |
| Internal Bath Volume | 22 L |
| Refrigerant | R404A (GWP = 3922) |
| Compressor Type | Single-stage, water-cooled |
| External Pt100 Sensor Interface | Integrated |
| Communication Interfaces | RS232, RS485 (optional Profibus) |
| Compliance | DIN 12876-1 Class III (FL) |
| Dimensions (W×L×H) | 59 × 76 × 116 cm |
| Weight | 214 kg |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | FX30 |
| Cooling Type | Water-Cooled |
| Temperature Range | 0 to +25 °C (up to +30 °C optional) |
| Refrigeration Capacity | 18.2 kW at 0 °C |
| Temperature Stability | ±1.5 °C |
| Circulation Pump Flow Rate | 100 L/min |
| Circulation Pump Pressure | 2.6 bar |
| Reservoir Volume | 100 L |
| Operating Mode | Continuous |
| Ambient Operating Temperature | +10 to +40 °C (options: −15 °C or +45 °C) |
| Heating Power Options | 3 / 6 / 9 kW (configurable) |
| Recommended Heat Transfer Fluid | Thermal GX (operable down to −20 °C) |
| Brand | JULABO |
|---|---|
| Model | HE-4 |
| Type | Heating Circulating Bath |
| Origin | Germany |
| Temperature Range | +5 to +250 °C |
| Temperature Stability | ±0.01 °C |
| Bath Volume | 4.5 L |
| Heating Power | 2 kW |
| Pump Flow Rate | 22–26 L/min |
| Pump Pressure | 0.4–0.7 bar |
| Display | High-brightness VFD |
| Control Technology | ICC (Intelligent Current Control) |
| Temperature Calibration | ATC3 (3-point user calibration) |
| Safety Certification | DIN 12876-1 Class III (FL) |
| Communication Interface | RS232 (optional Profibus) |
| External PT100 Input | Integrated |
| Programmable Steps | 1×10 |
| Cooling Capability | Integrated cooling coil for ambient/near-ambient operation |
| Bath Material | Stainless steel (AISI 304) |
| Dimensions (W×L×H) | 21 × 42 × 40 cm |
| Weight | 11 kg |
| Ambient Operating Temperature | 5–40 °C |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | HE-4 |
| Temperature Range | +5 to +250 °C |
| Temperature Stability | ±0.01 °C |
| Bath Volume | 4.5 L |
| Circulation | Internal & External |
| Display Resolution | 0.01 °C |
| Pump Flow Rate | 22–26 L/min |
| Max. Pump Pressure | 0.4–0.7 bar |
| Communication Interfaces | RS232 (standard), RS485 (optional), Profibus (optional) |
| Programming Capacity | 1 profile × 10 steps (built-in), expandable to 6 profiles × 60 steps via integrated program editor |
| Compliance | DIN 12876-1 Class III (FL) |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | HighTech Series |
| Temperature Range | Ambient +5°C to 300°C |
| Temperature Stability | ±0.01°C |
| Bath Volume | 4.5–26 L |
| Circulation Type | Internal & External |
| Compliance | DIN 12876-1 Class III (FL) for Flammable Liquids |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | HL-4 |
| Instrument Type | Heating Circulating Bath |
| Temperature Range | +5 to +250 °C |
| Temperature Stability | ±0.01 °C |
| Bath Volume | 4.5 L |
| Heating Power | 2 kW |
| Pump Flow Rate | 22–26 L/min |
| Pump Pressure | 0.4–0.7 bar |
| Bath Opening/Depth (W×L/D) | 13×15/15 cm |
| Internal Tubing Diameter | 8/12 mm |
| Weight | 11 kg |
| Dimensions (W×L×H) | 21×42×40 cm |
| Display | VFD LCD with Dual-Temperature Monitoring |
| Control Interface | RS232 / RS485 (optional Profibus) |
| Safety Class | DIN 12876-1 Class III (FL) |
| Programmable Ramp-Soak Profiles | 6×60 steps |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | HT30-M1 |
| Instrument Type | Circulating Bath |
| Circulation Mode | Internal & External |
| Temperature Control | Heating-Only |
| Bath Volume | 2 L |
| Temperature Range | +70 to +400 °C |
| Temperature Stability | ±0.01 to ±0.1 °C |
| Heating Power | 3.0 kW |
| Supply Voltage | 230 V |
| Pump Flow Rate | 14–18 L/min |
| Pump Pressure | 0.8–1.2 bar |
| Controller Dimensions (W×L×H) | 25 × 25 × 18 cm |
| Circulator Dimensions (W×L×H) | 23 × 23 × 58 cm |
| Communication Interfaces | RS232, RS485, Analog I/O (0–10 V / 4–20 mA), Emergency Stop Input, Alarm Output, External HT Controller Interface |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | HT30-M1-CU |
| Bath Volume | 2 L |
| Temperature Range | +40 to +400 °C |
| Temperature Stability | ±0.01 to ±0.1 °C |
| Heating Power | 3.0 kW |
| Cooling Power | 15 kW |
| Pump Flow Rate | 14–18 L/min |
| Pump Pressure | 0.8–1.2 bar |
| Supply Voltage | 230 V |
| Controller Dimensions (W×L×H) | 25 × 25 × 18 cm |
| Circulator Dimensions (W×L×H) | 43 × 23 × 58 cm |
| Integrated Cooling Unit (C.U.) | Yes |
| Communication Interfaces | RS232, RS485, Analog I/O, Emergency Stop Input, Alarm Output, External HT Controller Interface |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | HT60-M2 |
| Instrument Type | Circulating Bath |
| Circulation Mode | Internal & External |
| Temperature Control | Heating-Only |
| Bath Volume | 2 L |
| Temperature Range | +70 to +400 °C |
| Temperature Stability | ±0.01 to ±0.1 °C |
| Heating Power | 7.0 kW |
| Supply Voltage | 3×400 V |
| Pump Flow Rate | 14–18 L/min |
| Pump Pressure | 0.8–1.2 bar |
| Controller Dimensions (W×L×H) | 25×25×18 cm |
| Circulator Dimensions (W×L×H) | 23×23×58 cm |
| Communication Interfaces | RS232/RS485, Analog I/O, Emergency Stop Input, Alarm Output, External HT Controller Interface |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | HT60-M2-CU |
| Temperature Range | +40 to +400 °C |
| Temperature Stability | ±0.01 to ±0.1 °C |
| Bath Volume | 2 L |
| Heating Power | 7.0 kW |
| Cooling Power (with C.U. unit) | 15 kW |
| Pump Flow Rate | 14–18 L/min |
| Pump Pressure | 0.8–1.2 bar |
| Supply Voltage | 3×400 V |
| Controller Dimensions (W×L×H) | 25×25×18 cm |
| Circulator Dimensions (W×L×H) | 43×23×58 cm |
| Communication Interfaces | RS232, RS485, Analog I/O, Emergency Stop Input, Alarm Output, External HT Controller Interface |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | Itherm-B1 |
| Bath Volume | 4.5 L |
| Temperature Range | RT + 5 °C to 100 °C |
| Temperature Stability | ±0.05 °C |
| Heating Power | 1.5 kW |
| Pump Performance | 10 L/min at 0.23 bar |
| Internal/External Circulation | Yes |
| Control Type | PID Heating-Only |
| Bath Opening/Depth (W×L/D) | 15×15×15 cm |
| Dimensions (W×L×H) | 17×33×38 cm |
| Weight | 8.2 kg |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | Itherm5A |
| Bath Volume | 5 L |
| Temperature Range | Ambient +5 °C to +60 °C |
| Temperature Stability | ±0.05 °C |
| Heating Power | 1.5 kW |
| Pump Pressure | 0.23 bar |
| Pump Flow Rate | 10 L/min |
| Bath Opening × Depth (W × L × D) | 12 × 14 × 15 cm |
| External Dimensions (W × L × H) | 14 × 40 × 35 cm |
| Weight | 5.2 kg |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | KRC180 |
| Type | Upright |
| Capacity | 180 L |
| Operating Temperature Range | –2 °C to +12 °C |
| Temperature Stability | ±1.0 °C |
| Display | 7-segment green LED, 0.1 °C resolution |
| Sensor | PTC |
| Overtemperature Protection | 105 °C |
| External Dimensions (W×D×H) | 60 × 64 × 86 cm |
| Internal Dimensions (W×D×H) | 52 × 40 × 70 cm |
| Net Weight | 35 kg |
| Ambient Operating Temperature | 0–35 °C |
| Power Supply | 230 V / 50 Hz |
| Safety Classification | DIN 12876-1 compliant |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | KRC50 |
| Type | Upright |
| Capacity | 50 L |
| Operating Temperature Range | −2 °C to +12 °C |
| Temperature Stability | ±1.0 °C |
| Display | 7-segment green LED, 0.1 °C resolution |
| Temperature Sensor | PTC |
| Overtemperature Protection | 105 °C |
| External Dimensions (W×D×H) | 53 × 63 × 54 cm |
| Internal Dimensions (W×D×H) | 42 × 31 × 39 cm |
| Net Weight | 23 kg |
| Ambient Operating Temperature | 0–35 °C |
| Power Supply | 230 V / 50 Hz |
| Safety Classification | DIN 12876-1 compliant |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | LC Series |
| Temperature Range (LC4) | –50 to 350 °C |
| Temperature Range (LC6) | –100 to 400 °C |
| Temperature Stability (LC4) | ±0.03 to ±1.2 °C |
| Temperature Stability (LC6) | ±0.01 to ±0.5 °C |
| Temperature Display Resolution (LC4) | 0.1 °C (LED) |
| Temperature Display Resolution (LC6) | 0.01 °C (LCD + LED) |
| Sensor Input | Triple Pt100 interfaces (working + safety + optional reference) |
| Communication | RS-232 serial interface |
| Analog Output | 0–10 V or 4–20 mA (configurable) |
| Housing Dimensions (LC4) | 17 × 17 × 16 cm (W × L × H) |
| Housing Dimensions (LC6) | 21 × 18 × 18 cm (W × L × H) |
| Safety Compliance | Integrated dual-sensor monitoring with independent safety cutoff, conforming to IEC 61010-1 and EN 61000-6-3 |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | LC6 |
| Temperature Range | –100 °C to +400 °C |
| Temperature Stability | ±0.01 °C to ±0.5 °C |
| Display Resolution | 0.01 °C |
| Heating Power | 3 kW |
| Sensor Inputs | 3 × Pt100 (1 safety, 2 working) |
| Communication Interfaces | RS-232, RS-485 (optional Profibus) |
| Analog I/O | Yes |
| Environmental Operating Range | 5 °C to 40 °C |
| Dimensions (W×L×H) | 21 × 18 × 18 cm |
| Weight | 4 kg |
| Power Supply | 230 V / 50–60 Hz / 14 A |
| External Temperature Stability | > ±0.03 °C |
| Safety Protection | Integrated Pt100 safety probe with independent monitoring circuit |
| Max. Connected Load | ≤ 3 kW |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | MAGIO Series |
| Temperature Range | Ambient +5 °C to 300 °C |
| Temperature Stability | ±0.01 °C |
| Bath Volume | 3–26 L |
| Circulation Flow Rate | 16–31 L/min |
| Outlet Pressure | 0.24–0.92 bar |
| Inlet Suction | 0.03–0.4 bar |
| Heating Power | 2–3 kW |
| Display | 7″ TFT LCD with multi-touch navigation |
| Compliance | DIN 12876-1 Class III (FL) |
| Material | Stainless steel (contact surfaces) |
| Immersion Depth | 150 mm (MS), 200 mm (MX) |
| Communication Interfaces | USB-A, USB-B, RS232, Ethernet, Modbus (optional), Profibus DP (optional) |
| External Sensor Input | PT100 |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | MS-1000F |
| Bath Volume | 21–30 L |
| Temperature Range | –50 °C to +200 °C |
| Temperature Stability | ±0.01 °C |
| Circulation Mode | Internal & External |
| Control Function | Heating & Cooling |
| Temperature Control Technology | ICC (Intelligent Control Circuit) |
| Pump Flow Rate | 16–31 L/min |
| Pressure Range | 0.24–0.92 bar |
| Suction Pressure Range | 0.03–0.4 bar |
| Programmable Steps | 8 programs × 60 steps each |
| Compliance | DIN 12876-1 Class S3 (flammable bath fluids permitted) |
| Communication Interfaces | USB, RS232, Ethernet, Analog (optional) |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | MS-310F |
| Temperature Range | −30 °C to +200 °C |
| Temperature Stability | ±0.01 °C |
| Bath Volume | 3–4 L |
| Circulation Mode | Internal & External |
| Pump Flow Rate | 16–31 L/min |
| Pressure Range | 0.24–0.92 bar |
| Display | 7″ TFT Color Touchscreen |
| Control Technology | ICC (Intelligent Control Concept) |
| Compliance | DIN 12876-1 Class S3 (flammable bath fluids permitted) |
| Communication Interfaces | USB, RS232, Ethernet, Analog (optional) |
| Programmable Steps | 8 programs × 60 steps each |
| Bath Material | High-grade stainless steel (contact surfaces) |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | NEM / NEM-50 / NEM-92 |
| Temperature Range | −20 to +90 °C (NEM-50) / −40 to +150 °C (NEM-92) |
| Flow Rate | 9–26 L/min |
| Temperature Stability | ±0.05 to ±0.1 °C (NEM-50) / ±0.05 to ±0.2 °C (NEM-92) |
| Display | 5.7″ TFT touchscreen, 0.01 °C resolution |
| Heating Power | 6 kW (NEM-50) / 12 kW (NEM-92) |
| Cooling Power @20 °C | 7.5 kW (NEM-50) / 25 kW (NEM-92) |
| Pump Flow | 35–76 L/min (NEM-50) / 26–80 L/min (NEM-92) |
| Pump Pressure | 0.48–3.2 bar (NEM-50) / 0.5–3.0 bar (NEM-92) |
| Compressor | Single-stage water-cooled (NEM-50) / Two-stage water-cooled (NEM-92) |
| Heat Exchanger | Not equipped (NEM-50) / Equipped (NEM-92) |
| Secondary Circulation Pump | Not equipped (NEM-50) / Equipped (NEM-92) |
| Heat Transfer Fluid | Antifreeze (Thermal HL60) |
| Dimensions (W×D×H) | 53×66.5×126 cm (NEM-50) / 95×127×190 cm (NEM-92) |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | PMC-40 / PMC-85 |
| Temperature Range | −30 to +150 °C (PMC-40) / −50 to +180 °C (PMC-85) |
| Flow Rate | 5–12 L/min |
| Temperature Stability | ±0.01 to ±0.05 °C (PMC-40) / ±0.05 to ±0.1 °C (PMC-85) |
| Display | 5.7″ TFT touchscreen, 0.01 °C resolution |
| Heating Power | 2.7 kW (PMC-40) / 6 kW (PMC-85) |
| Refrigeration Capacity | 1.2 kW @ 20 °C (PMC-40) / 2.5 kW @ 20 °C (PMC-85) |
| Pump Flow Range | 16–40 L/min (PMC-40) / 35–80 L/min (PMC-85) |
| Pump Pressure | 0.3–1.7 bar (PMC-40) / 0.48–3.2 bar (PMC-85) |
| Compressor Type | Single-stage air-cooled (PMC-40) / Two-stage air-cooled (PMC-85) |
| Heat Transfer Fluid | Thermal HL60 |
| Dimensions (W×D×H) | 33×59×67 cm (PMC-40) / 61×108×125 cm (PMC-85) |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | PRESTO A30 / A38 |
| Circulation Type | Internal & External |
| Temperature Control Mode | Refrigeration & Heating |
| Bath Volume | 2.4 L / 3.5 L |
| Temperature Range | −45 °C to +250 °C |
| Temperature Stability | ±0.01 °C to ±0.05 °C |
| Heating Power | 2.7 kW |
| Refrigeration Power (at HL+ thermal fluid) | 0.5 kW @ +20 °C, 0.4 kW @ +90 °C, 0.2 kW @ −20 °C, −0.05 kW @ −40 °C |
| Pump Flow Rate | 25 L/min (A30), 22–51 L/min (A38) |
| Pump Pressure | 0.5 bar (A30), 0.3–1.6 bar (A38) |
| Fluid Compatibility | Julabo HL+ series synthetic heat transfer fluids |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | PRESTO A40 / A41 |
| Instrument Type | Circulating Bath Chiller/Heater |
| Circulation Mode | Internal & External |
| Temperature Control | Refrigeration & Heating |
| Bath Volume | 3.5 L |
| Temperature Range | −45 °C to +250 °C |
| Temperature Stability | ±0.01 °C to ±0.05 °C |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | PRESTO A45 / A45t |
| Circulation Type | Internal & External |
| Temperature Control Mode | Refrigeration & Heating |
| Bath Volume | 7.5 L |
| Temperature Range | -45 °C to +250 °C |
| Temperature Stability | ±0.05 °C to ±0.1 °C |
| Heating Power | 6.0 kW (A45) / 12 kW (A45t) |
| Cooling Power (kW) | 3.5 @ +20 °C, 3.3 @ 0 °C, 1.8 @ -20 °C, 0.3 @ -40 °C |
| Pump Flow Rate | 35–76 L/min |
| Pump Pressure | 0.48–3.2 bar |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | PRESTO A70 |
| Instrument Type | Circulating Bath Chiller/Heater |
| Circulation Mode | Internal & External |
| Temperature Control | Refrigeration & Heating |
| Bath Volume | 3.9 L |
| Temperature Range | −75 °C to +250 °C |
| Temperature Stability | ±0.01 °C to ±0.05 °C |
| Heating Power | 1.8 kW |
| Refrigeration Power (at thermal oil HL, +20 °C / 0 °C / −20 °C / −40 °C) | 1.00 kW / 0.91 kW / 0.84 kW / 0.75 kW |
| Pump Flow Rate | 16–40 L/min |
| Pump Pressure | 0.3–1.7 bar |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | PRESTO A80 / A80t |
| Circulation Type | Internal & External |
| Temperature Control Mode | Refrigeration & Heating |
| Bath Volume | 3.9 L |
| Temperature Range | −80 °C to +250 °C |
| Temperature Stability | ±0.01 °C to ±0.05 °C |
| Heating Power | 1.8 kW (A80) / 3.4 kW (A80t) |
| Cooling Power (kW) | 1.2 @ +20 °C, 1.2 @ 0 °C, 1.1 @ −20 °C, 1.1 @ −40 °C, 0.65 @ −60 °C, 0.1 @ −80 °C |
| Pump Flow Rate | 16–40 L/min |
| Pump Pressure | 0.3–1.7 bar (A80) / 0.3–1.6 bar (A80t) |
| Fluid Fill Volume | 3.9 L |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | PRESTO A85 / A85t |
| Circulation Type | Internal & External |
| Temperature Control Mode | Refrigeration & Heating |
| Bath Volume | 9.5 L |
| Temperature Range | −85 °C to +250 °C |
| Temperature Stability | ±0.05 °C to ±0.1 °C |
| Heating Power | 6.0 kW (A85) / 15 kW (A85t) |
| Refrigeration Power (kW) | 2.5 @ +20 °C, 2.4 @ 0 °C, 2.4 @ −20 °C, 2.4 @ −40 °C, 2.2 @ −60 °C, 0.4 @ −80 °C |
| Pump Flow Rate | 35–80 L/min |
| Pump Pressure | 0.48–3.2 bar |
| Brand | Julabo |
|---|---|
| Origin | Germany |
| Model | PRESTO W40 / W41 |
| Circulation Type | Internal & External |
| Temperature Control Mode | Refrigeration & Heating |
| Bath Volume | 3.5 L (W40) / 7.5 L (W41) |
| Temperature Range | −40 °C to +250 °C (W40) / −45 °C to +250 °C (W41) |
| Temperature Stability | ±0.01 °C to ±0.05 °C |
| Heating Power | 2.7 kW |
| Refrigeration Power (kW) | 1.2 @ +20 °C / 1.0 @ +30 °C / 0.46 @ −20 °C / 0.07 @ −40 °C (W40) |
| Pump Flow Rate | 16–40 L/min (W40) / 22–51 L/min (W41) |
| Pump Pressure | 0.3–1.6 bar (W40) / 0.48–3.2 bar (W41) |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | PRESTO W50 |
| Temperature Range | −50 °C to +250 °C |
| Temperature Stability | ±0.05 °C to ±0.1 °C |
| Bath Volume | 1.5 L |
| Circulation Type | External |
| Temperature Control Mode | Refrigeration & Heating |
| Heating Power | 6.0 kW |
| Refrigeration Power (at −40 °C) | 0.6 kW |
| Pump Flow Rate | 35–76 L/min |
| Pump Pressure | 0.48–3.2 bar |
| Fluid Fill Volume | 7.5 L |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | PRESTO W50 / W50t / W55 |
| Temperature Range | −55 °C to +250 °C |
| Temperature Stability | ±0.05 °C to ±0.2 °C |
| Bath Volume | 7.0–7.5 L |
| Circulation Type | Internal & External |
| Cooling/Heating Mode | Dual-function |
| Heating Power | 6.0–12.0 kW |
| Refrigeration Power (at −20 °C) | 3.0–4.0 kW |
| Pump Flow Rate | 35–76 L/min |
| Max. Pump Pressure | 0.48–3.2 bar |
| Fluid Compatibility | Thermal HL heat transfer fluid |