- All
- Favorite
- Popular
- Most rated
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Classification | Domestic (China) |
| Model | BRS-10 |
| Pricing | Upon Request |
| Temperature Range | RT+10°C to 100°C |
| Temperature Uniformity | ≤ ±2°C |
| Humidity Range | 30–98% RH |
| Working Volume | 5–200 m³ (Customizable) |
| Refrigeration System | Imported Hermetic Compressor |
| Control System | PID-Based Programmable Controller with Digital Display |
| Interior Material | AISI 304 Stainless Steel (Optional Configurations Available) |
| Exterior Finish | Powder-Coated Cold-Rolled Steel |
| Air Circulation | Forced-Air Convection with Low-Noise Axial Fans |
| Electrical Supply | 380 V, 50 Hz |
| Safety Protections | Overcurrent, Overvoltage, Ground-Fault, and Thermal Cut-off Protection |
| Ambient Operating Temperature | 10–35°C |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | GDW-010 |
| Price | USD 5,300 (FOB Jiangsu) |
| Internal Chamber Dimensions | 1000 × 1000 × 1000 mm (W × H × D) |
| Temperature Range Options | −80 °C to +150 °C (standard), up to +200 °C (optional high-temp configuration) |
| Temperature Uniformity | ≤ ±2 °C (unloaded) |
| Temperature Fluctuation | ±0.5 °C (unloaded) |
| Temperature Deviation | ≤ ±2 °C |
| Ramp Rate | 0.7–1.0 °C/min (typical, dependent on setpoint and load) |
| Timer Range | 0–9999 hours |
| Power Supply | AC 380 V, 3-phase, 50/60 Hz |
| Exterior | Precision CNC-machined A3 carbon steel with electrostatic epoxy powder coating |
| Interior | SUS304 stainless steel |
| Controller | Imported Japanese PID-based digital temperature controller |
| Refrigeration Compressor | Tecumseh (France-manufactured “Tecumseh” brand, distributed under OEM agreement) |
| Safety Protections | Over-temperature, over-pressure, compressor overload, phase failure, and short-circuit protection |
| Ambient Operating Environment | 15–35 °C, ≤85% RH non-condensing |
| Brand | Langbo |
|---|---|
| Origin | Jiangsu, China |
| Model | GDCJ-3-100 |
| Temperature Range | −70 °C to +150 °C |
| Test Zone Dimensions | 450 × 450 × 450 mm (W × D × H) |
| Temperature Transition Time (Door Switch) | ≤5 s |
| Temperature Recovery Time in Test Zone | ≤5 min |
| Temperature Uniformity | ±2 °C |
| Heating Rate (Typical) | 40 min (−70 °C → +150 °C) |
| Cooling Rate (Typical) | 45 min (+150 °C → −70 °C) |
| Refrigeration System | Twin-compressor cascade configuration with imported Copeland/Tecumseh or Bitzer semi-hermetic units |
| Control System | PLC-based with 7-inch color TFT-LCD HMI (English/Chinese switchable) |
| Communication Interface | RS-232 standard |
| Compliance | Designed per IEC 60068-2-14, MIL-STD-810G Method 503.5, GB/T 2423.22 |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | LX-500 |
| Price | USD 10,800 (FOB Jiangsu) |
| Internal Chamber Dimensions | 800 × 800 × 800 mm |
| External Dimensions | 1020 × 1350 × 1550 mm |
| Spray Ring Radius | R375 mm or R500 mm |
| Water Pipe Diameter | 16 mm |
| Nozzle Diameter | 0.4 mm |
| Nozzle Spacing | 50 mm |
| Oscillating Pipe Swing Angle | ±60°, ±90°, ±180° |
| Turntable Rotation Speed | 1 rpm |
| Controller | Digital Programmable Oscillation Controller with Imported Frequency Converter |
| Timer | Microprocessor-Based Programmable Timer |
| Water Pressure Regulation | Calibrated Flow Meter |
| Oscillation Parameters | Adjustable Swing Angle and Angular Velocity |
| Water Supply System | Integrated Reservoir + Booster Pump |
| Safety Protections | Leakage Current Protection, Short-Circuit Protection, Motor Overheat Protection |
| Brand | Langbo |
|---|---|
| Origin | Jiangsu, China |
| Model | GFGDJS-1500 |
| Internal Dimensions (W×D×H) | 1000 × 1000 × 1500 mm |
| Temperature Range | −40 °C to +100 °C |
| Temperature Cycling Range | −40 °C to +100 °C |
| Humidity Range | 30–98% RH (at 40–90 °C) |
| Humidity Cycling Range | 75–95% RH (at 25–85 °C) |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Deviation | +2 / −3% RH |
| Heating/Cooling Rate | 1.0–2.0 °C/min (linearly adjustable) |
| Timer Range | 0–9999 h |
| Power Supply | AC 380 V, 50 Hz |
| Total Power Consumption | 32 kW |
| Refrigerant | R23 / R404A |
| Control Resolution | 0.1 °C |
| Display | 5.7″ LED touchscreen interface |
| Compliance | GB/T 19394–2003, GB/T 9535–1998, GB/T 6492–1986, IEC 61215:2005, IEC 61646, IEC 61345:1998 |
| Brand | Langbo |
|---|---|
| Origin | Jiangsu, China |
| Model | LHH-150GSP, LHH-250GSP |
| Internal Dimensions (L×W×H) | 600×405×620 mm |
| Temperature Range | 0–65°C (dark), 10–65°C (light) |
| Humidity Range | 40–98% RH |
| Illumination | 0–6000 lx (adjustable) |
| Temperature Control Accuracy | ±0.1°C |
| Temperature Uniformity | ±0.5°C |
| Humidity Uniformity | ±3% RH |
| Temperature Sensor | Imported Swiss PT100 Platinum Resistance Thermometer |
| Humidity Sensing | Direct-reading PT100-based RH sensor |
| Power Supply | 380 V, 50 Hz, 3-phase 5-wire |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | LH-010, LH-225 |
| Temperature Range | RT+10°C to 200°C |
| Temperature Uniformity | ≤ ±1.5°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Heating Rate | ~50 min (20°C → 200°C) |
| Air Exchange Rate | 10–300 cycles/hour (adjustable) |
| Sample Rack Rotation Speed | 10–12 rpm |
| Compliance | JB/T 7444–1994, IEC 60540 |
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | HS-100 / DHS-100 |
| Internal Volume | 100 L |
| Interior Dimensions (W×D×H) | 400 × 500 × 500 mm |
| Temperature Range | HS-type: RT+10°C to 100°C |
| DHS-type | 0°C to 100°C |
| Humidity Range | HS-type: 85–98% RH |
| DHS-type | 45–98% RH |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Humidification Method | Shallow-water tray evaporation (surface evaporation) |
| Construction | Stainless steel inner chamber, polyurethane foam insulation |
| Cooling System | Finned stainless steel heat exchanger with multi-stage evaporator |
| Refrigeration Options | Single-stage or cascade (dual-stage) refrigeration (air-cooled or water-cooled) |
| Compressor | Imported hermetic scroll compressor |
| Controller | Fuji Electric PID temperature & humidity controller (Japan) |
| Sensors | Imported high-accuracy capacitive RH sensor and Pt100 temperature probe |
| Safety Protections | Leakage current protection, low-water-level cutoff, overtemperature cutoff, fast-acting fuse, compressor high-pressure protection |
| Test Conditions | All specifications measured at ambient temperature (QT) = 25°C, empty chamber, steady-state operation |
| Brand | Langbo |
|---|---|
| Origin | Jiangsu, China |
| Model | MS-015 / MS-025 |
| Temperature Range | 20–80 °C |
| Humidity Range | 45–98 %RH |
| Humidity Deviation | ≤ +2 to –3 %RH |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Controller | Fuji Electric Programmable Temperature & Humidity Controller |
| Interior Material | Stainless Steel (AISI 304) |
| Exterior Material | Powder-Coated Carbon Steel |
| Humidification Method | Surface Evaporation |
| Refrigeration System | Imported Compressor-Based Cooling |
| Safety Protections | Over-Temperature, Over-Pressure, and Low-Water-Level Interlocks |
| Compliance | GB/T 2423.16–1999 (IEC 60068-2-10), GJB 150.10A–2009 |
| Brand | Langbo |
|---|---|
| Origin | Jiangsu, China |
| Model | GDJS-010 |
| Temperature Range | −20 °C to +150 °C |
| Refrigeration | Hermetic Compressor Cooling |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Uniformity | ±1 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±1 °C |
| Heating Rate | ≤60 min (−20 °C → +150 °C) |
| Cooling Rate | ≤80 min (+150 °C → −20 °C) |
| Interior Dimensions | 450 × 450 × 450 mm |
| Internal Volume | 91.1 L |
| Humidity Range | 30–98 %RH |
| Humidity Control Accuracy | ±2–3 %RH |
| Controller | Fuji PID-based Touchscreen HMI with Programmable Profile Storage |
| Construction | SUS304 Stainless Steel Interior |
| Insulation | Polyurethane Foam (≥100 mm Thickness) |
| Viewing Window | Double-Layer Hollow Glass with Anti-Condensation Heater |
| Safety Protections | Low-Water Cut-off, Over-Temperature Cut-off, Compressor High-Pressure Protection |
Show next