Chemical Analysis Instruments
Filter
Showing 2041–2070 of 4548 results
| Brand | Advion Interchim Scientific |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | iASAP Inert Gas Atmospheric Pressure Solid Analysis Probe |
| Instrument Type | APCI Ion Source |
| Application Scope | General-Purpose |
| Mass Range | 10–2000 m/z |
| Sensitivity | S/N ≥ 100:1 (1 pg reserpine) |
| Resolution | 0.5–0.85 m/z (FWHM) |
| Mass Accuracy | ±0.1 Da |
| Compliance | Compatible with Advion expression® CMS and compact CMS platforms |
| Brand | 1124123/13213112 |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Laboratory Benchtop System |
| Application Scope | General-Purpose Ion Analysis |
| Maximum Operating Pressure | 42 MPa |
| Fluidic Path Material | Full-PEEK & PTFE/PEEK/PP Non-Metallic Construction |
| Pump Configuration | Integrated Quaternary Gradient Pump with Electrolytic Eluent Generation |
| Detector Options | Conductivity, Pulsed Amperometric (PAD), UV-Vis, Fluorescence |
| Compliance Support | ASTM D4327, ISO 10304-1/-3, USP <645>, EPA Methods 300.0/317.0/321.8 |
| Brand | SGM |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | ICP |
| Price | USD 195 (FOB Beijing) |
| Operating Temperature | Up to 10,000 K |
| Material | High-Purity Quartz (≥99.99% SiO₂) |
| Inner Diameter | 2.0 mm |
| Middle Tube ID | 12.0 mm |
| Outer Tube ID | 22.0 mm |
| Wall Thickness | 1.0–1.2 mm |
| Thermal Shock Resistance | ≥5 thermal cycles from 25 °C to 800 °C without cracking |
| Brand | ICT International |
|---|---|
| Country of Origin | Australia |
| Model | MPKit (comprising MP406 sensor and MPM160 meter) |
| Measurement Principle | Time-Domain Transmission (TDT) via high-frequency electromagnetic wave propagation |
| Measurement Range | 0–100% volumetric water content (VWC) |
| Accuracy | ±1% VWC (soil-specific calibration), ±5% VWC (generic mineral soil calibration) |
| Response Time | <0.5 s |
| Probe Preheat Time | 3 s |
| Ingress Protection | IP68 (fully sealed, permanently embeddable) |
| Probe Dimensions | 60 mm active length, 4 mm radius, stainless steel 316 body |
| Total Probe Length | 215 mm |
| Cable Standard | 4.5 m (extendable up to 100 m) |
| Readout Meter Display | 16-character LCD, showing battery status, raw mV output (0–1200 mV), calibrated VWC, and unit indicators |
| Resolution | 0.1% VWC |
| Data Storage | 1 MB flash memory (~1024 readings) |
| Interface | RS-232 + USB download cable |
| Software | Windows-based ICT Data Manager (CSV export supported) |
| Sleep Current | 1 µA |
| Accessories Included | Stainless steel extension rod (enables 80 cm depth measurement), rugged ABS plastic carrying case |
| Compliance | Designed for field-deployable GLP-aligned environmental monitoring |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | ElectraSyn 2.0 Package |
| Price | Upon Request |
| Input Voltage | 48 VDC |
| Max Input Current | 1500 mA |
| Output Voltage | 30 V / 10 V |
| Output Current | 100 mA |
| Motor Power | 9 W |
| Speed Range | 50–1500 rpm |
| Speed Setting Accuracy | ±10 rpm |
| Max Stirring Volume (H₂O) | 0.1 L |
| Stir Bar Length Compatibility | 8–16 mm |
| Speed Control | Rotary Knob |
| Display | TFT |
| Output Current Resolution | 0.1 mA |
| Output Voltage Resolution | 0.01 V |
| Current Measurement Resolution | 0.1 mA |
| Voltage Measurement Resolution | 0.1 V |
| Current Measurement Accuracy | ±0.1 mA |
| Voltage Measurement Accuracy | ±0.01 V |
| Dimensions (W×D×H) | 130 × 150 × 250 mm |
| Weight | 3.55 kg |
| Operating Temperature | 5–50 °C |
| Relative Humidity Limit | 80 % RH |
| Ingress Protection | IP40 per DIN EN 60529 |
| USB Interface | Yes |
| Mains Input | 100–240 V AC, 50/60 Hz |
| Device Input Power | 39.84 W |
| Standby Power Consumption | 5 W |
| DC Supply | 48 V = |
| DC Current Draw | 750 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | ElectraSyn 2.0 Pro Package |
| Voltage Input (Nominal) | 48 VDC |
| Max Input Current | 1500 mA |
| Output Voltage | 30 V / 10 V |
| Output Current | 100 mA |
| Motor Output Power | 9 W |
| Speed Range | 50–1500 rpm |
| Speed Setting Accuracy | ±10 rpm |
| Max Stirring Volume (H₂O) | 0.1 L |
| Stir Bar Length Compatibility | 8–16 mm |
| Output Current Resolution | 0.1 mA |
| Output Voltage Resolution | 0.01 V |
| Current Measurement Resolution | 0.1 mA |
| Voltage Measurement Resolution | 0.1 V |
| Current Measurement Accuracy | ±0.1 mA |
| Voltage Measurement Accuracy | ±0.01 V |
| Dimensions (W×D×H) | 130 × 150 × 250 mm |
| Weight | 3.55 kg |
| Operating Temperature Range | 5–50 °C |
| Max Relative Humidity | 80 % |
| Ingress Protection | IP40 (DIN EN 60529) |
| USB Interface | Yes |
| AC Input | 100–240 V, 50/60 Hz |
| Total Input Power | 39.84 W |
| Standby Power Consumption | 5 W |
| DC Supply | 48 V =, Current Draw: 750 mA |
| Origin | Finland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Series | ImSpector |
| Spectral Range (Standard Config) | 380–800 nm (V8) / 400–1000 nm (V10) |
| Slit Width | 50 µm (25/80/150 µm optional) |
| Slit Length | 9.6–9.8 mm |
| Relative Aperture | f/2.8 |
| Optical Design | Transmissive Grating-Based Push-Broom Imaging |
| Image Plane Size | 4.3 × 6.6 mm or 6.6 × 8.8 mm |
| Spatial Resolution | <30 µm RMS (V8), <40 µm RMS (V10) |
| Spectral Resolution | 6–11.2 nm |
| Stray Light | <0.5% |
| Throughput Efficiency | >50% |
| Housing Material | Anodized Aluminum |
| Dimensions | Ø35 × 139 mm |
| Weight | 300 g |
| Interface | Standard C-Mount |
| Optical Aberration Control | Optimized for minimal astigmatism, pincushion (<30–45 µm), and trapezoidal distortion (<20–40 µm) |
| Brand | In-situ High-tech |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | CIS-DEMS-DM |
| Quotation | Upon Request |
| Mass Range | 1–100 / 200 / 300 amu |
| Inlet Pressure Range | 1×10⁻⁷ mbar to 10 bar (customizable) |
| Inlet Reduction Stages | 1/2/3-stage selectable |
| Inlet Flow Rate | 0.1–100 sccm |
| Max Inlet Pressure | ≤1.5 bar |
| Inlet Tubing Material | Stainless steel / Quartz / PEEK |
| Heated Inlet Temperature | 120 / 200 / 300 °C |
| Quadrupole Rods | Stainless steel, Ø6 mm × 125 mm |
| Detector | C-SEM / Faraday cup |
| LOD (C-SEM) | <100 ppb |
| Peak Width | 0.5–2.5 amu |
| Ion Source Bake-out Temp | Up to 150 °C |
| Scan Speed | 1 ms–16 s per amu (programmable, min. 1 ms/amu) |
| Vacuum System | Pfeiffer HiPace 80 molecular pump (90,000 rpm) + ACP 20 dry scroll pump |
| I/O Interface | Digital & analog outputs |
| Compliance | Fully compatible with ASTM E1947, ISO/IEC 17025 workflows, and supports GLP/GMP audit trails via optional software modules |
| Brand | InFoMass |
|---|---|
| Origin | Beijing, China |
| Model | L10 |
| Cooling Options | Liquid Nitrogen (−189 °C) or Electronic (−90 °C) |
| Modulation Range | C₄–C₄₅ (LN₂ mode) |
| Column Configuration | Dual-column serial coupling via cryogenic loop modulator |
| Modulation Cycle | Programmable |
| Cold Jet Flow | Precisely controllable |
| Software Compatibility | MDCTM (GC Image LCC) |
| Structural Design | Fixed-angle column routing bracket eliminating manual alignment calibration |
| Moving Parts | None |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | EasyNTC |
| Pricing | Available Upon Request |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | EasyPrep Eco |
| Price | Upon Request |
| Application Level | Laboratory-Scale |
| Instrument Type | Medium-to-Low Pressure Preparative Liquid Chromatography System |
| Flow Rate Range | 0.1–150 mL/min |
| Maximum Operating Pressure | 1.0 MPa |
| UV-Vis Wavelength Selection | 254–800 nm (discrete wavelength options) |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | EasyPrep HP |
| Instrument Type | High-Pressure Preparative Liquid Chromatograph |
| Solvent Delivery | Binary Gradient |
| Flow Rate Range | Up to 100 mL/min |
| Maximum Pressure | 3000 psi (20.7 MPa) |
| UV Detection Wavelength Options | 200–400 nm or 200–800 nm |
| Column ID Compatibility | 10–50 mm |
| Collection Modes | Full Fraction, Peak-Based, Time-Based |
| Dimensions (L×D×H) | 587 × 400 × 565 mm |
| Safety Features | Leak Detection, Over-Pressure Alarm |
| Software | Real-Time Gradient Editing, Drag-and-Drop Gradient Curve Adjustment, On-the-Fly Flow Rate Modification |
| Tube Rack Recognition | Supported |
| Regulatory Compliance Support | GLP-compliant audit trail logging (software-configurable), FDA 21 CFR Part 11 readiness (user authentication & electronic signature modules available) |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Regional Category | Domestic (China-Made) |
| Model | INNOTEG EasyPrep MP |
| Instrument Type | Medium- to Low-Pressure Preparative Liquid Chromatography System |
| Flow Rate Range | 1–200 mL/min |
| Flow Accuracy | ≤ ±2% |
| Maximum Operating Pressure | 200 psi |
| UV Detection Wavelength Range | 200–400 nm |
| Baseline Noise | 1 × 10⁻⁴ AU (at 254 nm, water) |
| Brand | Innoteg |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | InnoFTIR10 |
| Instrument Type | Laboratory FTIR Spectrometer |
| Wavenumber Range | 7800–350 cm⁻¹ |
| Spectral Resolution | Better than 1.0 cm⁻¹ |
| Signal-to-Noise Ratio (S/N) | 45,000:1 (peak-to-peak, 2100 cm⁻¹, 4 cm⁻¹ resolution, 1-minute acquisition) |
| Beam Diameter | 10 mm |
| Beamsplitter | Imported multi-layer germanium-coated KBr, Ø60 mm with anti-humidity coating |
| Source | Imported high-intensity air-cooled ceramic IR source |
| Detector | Imported low-noise deuterated triglycine sulfate (DLATGS) detector |
| Interferometer | Oscillating-mirror interferometer (space-derived optical architecture) |
| Baseline Flatness | ≤0.1% T |
| Dimensions (W×D×H) | ≥590 × 355 × 185 mm |
| Sample Compartment Size (W×D×H) | ≥200 × 255 × 150 mm |
| Weight | 26 kg |
| Interface | USB |
| Power Supply | AC 220 V / DC 12 V, 40 W |
| Operating System | Windows 10 (64-bit or later) |
| Ambient Temperature | 15–28 °C |
| Relative Humidity | <65% RH (non-condensing) |
| Optional Features | N₂ purge port, built-in desiccant chamber with visual indicator, heater-assisted humidity control, adjustable interferometer energy output |
| Brand | Innoteg |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | InnoFTIR15 |
| Instrument Type | Laboratory FTIR Spectrometer |
| Wavenumber Range | 7800–350 cm⁻¹ |
| Spectral Resolution | <1.0 cm⁻¹ |
| Signal-to-Noise Ratio (S/N) | 30,000:1 (peak-to-peak, 2100 cm⁻¹, 4 cm⁻¹ resolution, 60 s acquisition) |
| Beam Diameter | 15 mm |
| Beamsplitter | Multi-layer Ge-coated KBr (imported) |
| Source | High-intensity air-cooled ceramic IR source (imported) |
| Interferometer | Michelson-type, self-compensating, automated alignment |
| Detector | Low-noise deuterated triglycine sulfate (DLATGS) detector (imported) |
| Baseline Flatness | ≤0.1% T |
| Measurement Modes | Transmittance, Absorbance, Radiant Energy |
| Dimensions (W×D×H) | 486 × 406 × 230 mm |
| Sample Compartment Size | 200 × 170 × 145 mm |
| Weight | 23 kg |
| Interface | USB 2.0 |
| Power Supply | AC 220 V / DC 12 V, 40 W |
| OS Compatibility | Windows 10 (64-bit or later) |
| Operating Environment | 15–28 °C, RH <65% (non-condensing) |
| Brand | Innoteg |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | InnoFTIR15C |
| Instrument Type | Laboratory FTIR Spectrometer |
| Wavenumber Range | 4000–400 cm⁻¹ |
| Signal-to-Noise Ratio (S/N) | 15,000:1 (at 4 cm⁻¹ resolution, 1 min scan) |
| Wavenumber Accuracy | ±0.01 cm⁻¹ |
| Optical System | Michelson Interferometer with KBr Multilayer Beam Splitter (Ge-coated, anti-humidity) |
| Detector | High-Sensitivity DLATGS |
| Source | High-Intensity Air-Cooled Ceramic IR Source |
| Enclosure | Electromagnetically Shielded Metal Housing |
| Included Accessory | Integrated Desiccant Dry Box |
| Software | Building Glass Compliance Suite (GB/T 2680–2021, JGJ/T 151–2008 compliant) |
| Spectral Range | 190–3200 nm |
|---|---|
| Bandwidth (UV-VIS) | 0.2, 0.5, 1, 2, 3, 5 nm |
| Bandwidth (NIR) | 0.8, 2, 4, 8, 12, 20 nm |
| Wavelength Accuracy | ±0.5 nm (UV/VIS), ±2.0 nm (NIR) |
| Wavelength Repeatability | ≤0.3 nm (UV/VIS), ≤1.0 nm (NIR) |
| Brand | INNOTEG |
|---|---|
| Origin | China |
| Manufacturer Type | Manufacturer |
| Model | IUS-190 |
| Spectral Range | 190–3200 nm |
| Bandwidth (UV-VIS) | 0.2, 0.5, 1, 2, 3, 5 nm |
| Bandwidth (NIR) | 0.8, 2, 4, 8, 12, 20 nm |
| Wavelength Accuracy | ±0.5 nm (UV/VIS), ±2.0 nm (NIR) |
| Wavelength Repeatability | ≤0.3 nm (UV/VIS), ≤1.0 nm (NIR) |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | IUS-200-10 |
| Spectral Range | 280–2500 nm |
| Slit Bandwidth | UV-VIS: 0.2, 0.5, 1, 2, 3, 5 nm |
| NIR | 0.8, 2, 4, 8, 12, 20 nm |
| Wavelength Accuracy | ±0.5 nm (UV/VIS), ±2.0 nm (NIR) |
| Wavelength Repeatability | ≤0.3 nm (UV/VIS), ≤1.0 nm (NIR) |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | IUS-200-15 |
| Spectral Range | 280–2500 nm |
| Slit Bandwidth | UV-VIS: 0.2, 0.5, 1, 2, 3, 5 nm |
| NIR | 0.8, 2, 4, 8, 12, 20 nm |
| Wavelength Accuracy | ±0.5 nm (UV/VIS), ±2.0 nm (NIR) |
| Wavelength Repeatability | ≤0.3 nm (UV/VIS), ≤1.0 nm (NIR) |
| Integrating Sphere Diameter | 150 mm |
| Optical Design | Dual-beam, dual-grating, dual-detector architecture |
| Detector Configuration | Separate optimized detectors for UV/VIS and NIR ranges |
| Software Compatibility | Windows 7/10 |
| Data Export Formats | TXT, CSV, XLSX |
| Compliance Standards | GB/T 2680-2021, JGJ/T 151-2008, ISO 9050:2003, GB/T 22476-2008, GB/T 36261-2018, GB/T 25261-2010, JG/T 235-2014, JGJ/T 287-2014, GJB 798-90, GJB 2502.2-2006 |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | IUS-200-6 |
| Spectral Range | 280–2500 nm |
| Slit Bandwidth | [UV-VIS] 0.2, 0.5, 1, 2, 3, 5 nm |
| Wavelength Accuracy | ±0.5 nm (UV/VIS), ±2.0 nm (NIR) |
| Wavelength Repeatability | ≤0.3 nm (UV/VIS), ≤1.0 nm (NIR) |
| Brand | INNOTEG |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | T2110 |
| Temperature Range | Ambient to 400 °C |
| Gas Flow Rate | 0–200 mL/min |
| Tube Capacity | 10 tubes |
| Brand | Innov-X |
|---|---|
| Origin | USA |
| Model | DELTA Series |
| Portability | Handheld |
| Elemental Range | Mg to U |
| Detection Limit | 1 ppm |
| Quantification Range | 1 ppm – 99.99% |
| Energy Resolution | <165 eV |
| Repeatability | ≥95% |
| Excitation Source | Micro-focus X-ray Tube (10–40 kV) |
| Detector | High-Performance Silicon Drift Detector (SDD) |
| Weight | <1.5 kg |
| Operating System | Microsoft Windows Embedded CE |
| Battery Life | >4 hours continuous operation |
| Hot-Swap Battery Support | Yes |
| Display | 32-bit color touchscreen |
| Sample Targeting | Integrated camera + collimated beam optics |
| Trigger Options | Mechanical trigger, Deadman safety trigger, or external PC control |
| Brand | Innov-X |
|---|---|
| Origin | USA |
| Model | XDD-5000 Series |
| Elemental Range | Mg to U |
| Detection Limit | 1 ppm – 99.99% |
| Energy Resolution | <165 eV |
| Repeatability | 95% |
| Weight | <12 kg |
| Excitation Source | 10 W Microfocus X-ray Tube |
| Detector | High-Performance Silicon Drift Detector (SDD) |
| Operating System | Windows XP |
| Configuration | Benchtop or Floor-Standing |
| Distribution Type | Imported Instrument via Authorized Distributor |
| Brand | INNUO |
|---|---|
| Origin | Shanghai, China |
| Model | SYTP-1 |
| Operating Frequency | 10 MHz |
| Mass Sensitivity | 2.26 × 10⁸ Hz/(g/cm²) |
| Mass Detection Range | 4.42 × 10⁻⁹ g/cm² to 4.42 × 10⁻⁴ g/cm² |
| Temperature Control Range | −196 °C to +70 °C |
| Vacuum Compatibility | Down to 1 × 10⁻⁵ Pa |
| Temperature Stability | ±0.1 °C |
| Frequency Resolution | ±1 Hz |
| Power Input | 100–240 VAC, 50/60 Hz |
| Interface Options | USB 2.0, Ethernet (RJ45), USB Flash Drive Data Export |
| Brand | Hefei Kejing |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic |
| Model | InP Crystal Substrate |
| Pricing | Available Upon Request |
| Crystal Structure | Single-Crystal Indium Phosphide |
| Doping | Undoped / Sn / S / Fe / Zn |
| Conductivity Type | N-type (Sn, S, Fe) / Semi-Insulating (Fe, Zn) / P-type (Zn) |
| Hardness | 3.0 Mohs |
| Density | 4.78 g/cm³ |
| Refractive Index | 3.45 (at 10.6 µm) |
| Carrier Concentration | 1–2×10¹⁶ cm⁻³ (undoped), 1–3×10¹⁸ cm⁻³ (Sn-doped), 1–4×10¹⁸ cm⁻³ (S-doped), 6–4×10¹⁸ cm⁻³ (Fe-doped) |
| Dislocation Density | <5×10⁴ cm⁻² |
| Growth Method | Liquid Encapsulated Czochralski (LEC) |
| Melting Point | 1072 °C |
| Elastic Modulus | 7.1×10¹¹ dyn·cm⁻² |
| Standard Orientations | <100> |
| Standard Dimensions | 10 mm × 10 mm × 0.5 mm |
| Surface Finish | Single-Side or Double-Side Polished |
| Surface Roughness (Ra) | <15 Å |
| Cleanroom Handling | Packaged in Class 100 cleanroom bags within Class 1000 cleanroom environment |
| Brand | INSA Optics |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Instrument Type | Laboratory FTIR Spectrometer |
| Spectral Range | 8000–350 cm⁻¹ (extendable to 12800–4000 cm⁻¹ in NIR |
| Spectral Resolution | 0.2 cm⁻¹ |
| Scan Speed | 2.5–60 kHz |
| Signal-to-Noise Ratio (SNR) | 40,000:1 (at 4 cm⁻¹, 1 min scan, MCT detector) |
| Wavenumber Accuracy | < ±0.1 cm⁻¹ |
| Vacuum Level | ≤ 0.2 mbar |
| Optical Design | All-metal vacuum-sealed cast-aluminum interferometer housing with independent optical chamber |
| Brand | Insent (Japan) |
|---|---|
| Origin | Japan |
| Type | Taste Sensing System (Electronic Tongue) |
| Sensor Principle | Artificial Lipid Membrane-Based Potentiometric Array |
| Compliance | Designed for GLP/GMP-aligned sensory evaluation workflows |
| Software | TS-5000Z Analysis Suite with FDA 21 CFR Part 11–ready audit trail option |
| Data Output | Multidimensional taste profiles (basic tastes + aftertaste richness), PCA/DA visualization, cluster heatmaps, temporal response curves |
| Sample Throughput | Up to 96 samples per automated sequence (with optional autosampler) |
| Interface | Touchscreen-guided operation with macro scripting support |
| Environmental Stability | EMI-shielded sensor chamber with temperature-controlled sample compartment (±0.1 °C) |
| Brand | INSION |
|---|---|
| Origin | Germany |
| Model | 2C UV VIS |
| Optical Architecture | Single-beam |
| Detector Type | Photodiode Array |
| Spectral Range | 2 × 350–1050 nm |
| Wavelength Accuracy | < 10 nm FWHM |
| Spectral Resolution | < 10 nm FWHM |
| Sensitivity | > 2.0 × 10¹⁵ counts·nm/W·s at 650 nm |
| Optical Interface | Dual SMA 905 connectors |
| Calibration | Factory-calibrated, no user recalibration required |
| Mechanical Stability | Solid-state design, no moving parts |
| Operating Temperature Range | 5–40 °C |
| Dimensions | ≤ 65 × 45 × 25 mm |
| Weight | < 120 g |
| Brand | Instrumax |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | CADetector a1 |
| Price Range | USD 42,000 – 49,000 (FOB Tianjin) |
| Compatible Systems | HPLC, UPLC, SFC |
| Detector Type | Charged Aerosol Detector (CAD), classified as a universal mass-sensitive detector distinct from ELSD |