Common Laboratory Equipment
Filter
Showing 5401–5430 of 17931 results
| Origin | Tianjin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GM-0.5A |
| Pricing | Available Upon Request |
| Pumping Speed | 30 L/min |
| Operating Temperature Range | 7–40 °C |
| Diaphragm Housing Surface Temperature | <60 °C |
| Ultimate Vacuum Pressure | 200 mbar (abs) |
| Maximum Positive Pressure | 0.08 MPa (g) / 40 psi (g) |
| Noise Level | <55 dB(A) |
| Inlet/Outlet Port Diameter | φ6 mm |
| Dimensions (L×W×H) | 210 × 160 × 235 mm |
| Motor Power | 160 W |
| Net Weight | 8 kg |
| Dual-Mode Operation | Simultaneous Vacuum & Positive Pressure Capability |
| Origin | Tianjin, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | GM-0.5B |
| Price | Upon Request |
| Pumping Speed | 30 L/min |
| Operating Temperature (Pump Body) | <55 °C |
| Ultimate Vacuum | ≤50 mbar (≥−0.095 MPa) |
| Noise Level | <50 dB(A) |
| Inlet/Outlet Port Diameter | φ6 mm |
| Dimensions (L×W×H) | 300×120×235 mm |
| Motor Power | 160 W |
| Net Weight | 10 kg |
| Ambient Operating Temperature | 7–40 °C |
| Configuration | Dual-head negative-pressure design |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | GM-0501 |
| Power Rating | 1500 W |
| Heating Surface Dimensions | 400 × 280 mm |
| Maximum Surface Temperature | 400 °C |
| Control Method | Silicon Controlled Rectifier (SCR) Continuous Power Regulation |
| Housing Finish | Electrostatically Applied Epoxy-Polyester Coating |
| Compliance | CE-marked per EN 61000-6-3 (EMC) and EN 61000-6-2 (Immunity) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (China) |
| Model | GM-0604 |
| Power Rating | 1500 W |
| Chamber Dimensions (W×D×H) | 940 × 170 × 90 mm |
| Temperature Control | Digital PID controller with ±0.5 °C stability at setpoint |
| Construction | Stainless steel inner tank and lid, electrostatically coated outer housing |
| Heating Method | Immersed stainless steel heating element |
| Compliance | Designed for general laboratory use per IEC 61010-1 safety standards |
| Key | Origin: Imported |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | GMK-508-1L / GMK-508-3L / SC60 |
| Measurement Range | 0.1–100% H₂O |
| Accuracy | ±0.2% |
| Sample Capacity | 5 g (GMK-508-1L), 50 g (GMK-508-3L), 10–100 g (SC60) |
| Readability | 0.001 g |
| Heating Source | Halogen Lamp (200 W × 1 for GMK-508-1L |
| Display | LCD with real-time moisture %, initial/final weight & temperature |
| Interface | RS232 for printer/data export |
| Pan Diameter | Φ80 mm (GMK-508-1L), Φ170 mm (GMK-508-3L), Φ110 mm (SC60) |
| Dimensions | 260×130×370 mm (GMK-508-1L), 410×245×425 mm (GMK-508-3L), 350×200×260 mm (SC60) |
| Weight | 4.5 kg (GMK-508-1L), 10 kg (GMK-508-3L), 7.5 kg (SC60) |
| Origin | Europe |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | GMS150 |
| Price Range | USD 7,000 – 14,000 |
| Brand | Zhongxing Huili |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GN-300 |
| Nitrogen Purity | 99.995% |
| Output Flow Rate | 0–300 mL/min |
| Output Pressure | 0–0.4 MPa |
| Max Power Consumption | 150 W |
| Dimensions (W×D×H) | 320 × 180 × 350 mm |
| Net Weight | 10 kg |
| [Brand | Golden Real |
|---|---|
| Origin | Jiangsu, China |
| Model | Golden Real Pro 6085 Freeze Dryer |
| Instrument Type | Manifold (Multi-Port) Freeze Dryer |
| Application | Laboratory-Scale Lyophilization |
| Shelf Area | ≥0.16 m² |
| Ultimate Vacuum | ≤0.01 mbar (≤1 Pa) |
| Condenser Capacity (24 h) | 6 kg |
| Condenser Temperature | ≤−85 °C |
| Dimensions (W×D×H) | 55 × 80 × 42 cm] |
| Brand | Goldstar Instruments |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ECO mini |
| Instrument Type | Manifold-Style Freeze Dryer |
| Application | Laboratory-Scale Lyophilization |
| Shelf Area | 0.16 m² |
| Ultimate Vacuum | 0.1 Pa |
| Condensate Capacity (24 h) | 4 kg |
| Cold Trap Temperature | −60 °C |
| Dimensions (W×D×H) | 420 mm × 550 mm × 440 mm |
| Display | 7-inch LCD Touchscreen |
| Shelf Diameter | 260 mm |
| Number of Shelves | 3 |
| Manifold Ports | 8 |
| Defrost Method | Natural Thawing |
| Power Consumption | 0.75 kW |
| Net Weight | 47 kg |
| Brand | Goldstar Instruments |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Pro 9085 |
| Instrument Type | Manifold-Freezing Shelf Hybrid Freeze Dryer |
| Scale | Pilot-Scale |
| Lyophilization Area | ≥0.48 m² |
| Ultimate Vacuum | 0.01 mbar (1 Pa) |
| Condensate Capacity (24 h) | 9 kg |
| Condenser Temperature | ≤−85 °C |
| Dimensions (W×D×H) | 850 × 760 × 1300 mm |
| Weight | 180 kg |
| Power Supply | 220 V, 16 A, 2.2 kW |
| Shelf Configuration | 3 heated shelves (325 × 500 mm each) |
| Shelf Temperature Uniformity | ±1 °C |
| Vacuum Control Range | 0.001–1000 mbar |
| Vacuum Pump | Corrosion-Resistant, Anti-Oil-Backflow Design |
| Condenser | External Coil with PTFE-Coated Surface |
| Insulation | Frost-Resistant Thermal Barrier |
| Defrosting | Hot-Gas Automatic Defrost |
| Pressure Release | One-Touch Controlled Venting |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | Gongyi Yuhua Instrument |
|---|---|
| Origin | Henan, China |
| Model | YDF-1L, YDF-2L, YDF-3L, YDF-5L, YDF-10L–YDF-100L |
| Vessel Material | GG-17 Borosilicate Glass (3.3) |
| Max Vacuum | −0.098 MPa (−98 kPa) |
| Stirring Speed Range | 0–800 rpm (digital display) |
| Motor Power | 40 W |
| Operating Voltage | 220 V AC |
| Sealing | PTFE Components |
| Temperature Control | Compatible with External Oil/Water Bath Circulators or Chilled Circulation Units |
| Discharge | Bottom-mounted Full-Seal Drain Valve (for ≥10 L models) |
| Compliance | Designed for Lab-Scale Synthesis, Extraction, and Distillation under Ambient and Reduced Pressure |
| Brand | Gongyi Yuhua Instrument |
|---|---|
| Origin | Henan, China |
| Model | YRE-2050A (50 L) |
| Capacity | 50 L |
| Ultimate Vacuum | < 2000 Pa |
| Rotation Speed | 0–120 rpm |
| Temperature Range | Ambient to 99 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Power | 8 kW |
| Rotating Flask Capacity | 50 L |
| Collection Flask Capacity | 20 L |
| Motor Power | 180 W |
| Voltage/Frequency | 220 V / 50 Hz |
| Construction | Borosilicate Glass (3.3), Stainless Steel & Aluminum Alloy Frame, Fluoroelastomer Seals |
| Brand | Gongyi Yuhua Instrument |
|---|---|
| Origin | Henan, China |
| Model | YRE-5299 |
| Capacity | 1 L (standard), optional 2 L |
| Ultimate Vacuum | −0.098 MPa |
| Rotation Speed | 0–120 rpm (stepless) |
| Bath Temperature Range | Ambient to 99 °C |
| Temperature Control Accuracy | ±2 °C |
| Motor Power | 40 W |
| Total Power Consumption | 1000 W |
| Voltage/Frequency | 220 V / 50 Hz |
| Vertical Lift | 150 mm (motorized) |
| Condenser Type | Dual-layer vertical coil |
| Material of Contact Parts | High-borosilicate glass (3.3) and PTFE |
| Brand | Gongyi Yuyi Instrument |
|---|---|
| Origin | Henan, China |
| Model | MCR-3 |
| Microwave Frequency | 2450 MHz ±15 Hz |
| Microwave Output | Continuous wave, adjustable up to 800 W |
| Total Input Power | ≤1300 W |
| Temperature Control Range | Ambient to 250 °C |
| Temperature Control Accuracy | ±1 °C |
| Temperature Measurement Method | Contact-type PTFE-coated platinum resistance sensor (Class 0.2 accuracy) |
| Maximum Operating Pressure | Medium-pressure compatible (with optional vacuum accessory: –0.098 MPa) |
| Reaction Vessel Compatibility | 50–500 mL standard ground-glass joints (open-system configuration) |
| Construction Material | Stainless steel cavity and housing |
| Integrated Features | Built-in magnetic stirrer (stepless speed control), inert gas inlet port, ventilation/exhaust ducting, safety interlock door switch, magnetron overheat protection, multi-segment programmable operation (up to 5 segments), real-time temperature curve display, Flash memory parameter retention |
| Brand | Gongyi Yuyi Instrument |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | RTC-C |
| Instrument Type | Magnetic Stirrer |
| Max. Stirring Volume | 20 L |
| Speed Range | 0–2500 rpm |
| Heating Function | Integrated PID Temperature Control (Optional) |
| Compliance | CE-marked per EN 61010-1 for laboratory use |
| Brand | Gongyi Yuyi Instrument |
|---|---|
| Origin | Henan, China |
| Model | ZNCL-BS |
| Stirrer Type | Heating Magnetic Stirrer |
| Max. Stirring Volume | 50–5000 mL |
| Speed Range | 50–1800 rpm |
| Temperature Control Range | Ambient to 380 °C |
| Heating Plate Options | 140×140 mm, 180×180 mm, 230×230 mm, 280×280 mm |
| Heating Power | 260–350 W (model-dependent) |
| Motor Power | 40 W (DC 14–24 V) |
| Control Method | Fuzzy PID Algorithm with Dual Digital Display |
| Temperature Accuracy | ±1 °C |
| Sensor Type | Dual Thermocouple (Internal & External) |
| Voltage Range | 160–240 V AC, 50 Hz |
| Safety Features | Thermocouple Break Protection, Over-Temperature Cut-off, Insulated Metal Housing |
| Panel Material | Black Crystal Ceramic or Enamel-Coated Aluminum |
| Operating Time | Continuous |
| Compliance | Designed for general laboratory use under GLP-aligned workflows |
| Brand | Gongyi Yuyi Instrument |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Equipment Category | Domestic |
| Model | ZNCL-S-10D |
| Stirring Stations | 10 |
| Max. Stirring Volume per Station | 50–500 mL |
| Speed Range | 50–1800 rpm |
| Temperature Control Range | Ambient to 350 °C |
| Heating Plate Material | Ceramic |
| Control Method | Intelligent PID with Thyristor Output |
| Temperature Accuracy | ±1 °C |
| Stirring Power per Station | 8 W |
| Total Heating Power | 750 W |
| Dimensions (W×D×H) | 480 × 365 × 230 mm |
| Weight | 9.5 kg ± 0.2 kg |
| Voltage | 220 V AC, 50/60 Hz |
| Safety Features | Over-Temperature Protection, Thermocouple Break Protection, Insulated PBT Housing |
| [Brand | KEZHE Shanghai |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GOODSPE-5000 |
| Automation Level | Fully Automated |
| Channel Count | 12 parallel channels |
| Extraction Format | Cartridge-based SPE |
| Flow Rate Control | 0.1–120 mL/min |
| Solvent Selection Capacity | Up to 8 solvents (standard configuration: 7) |
| Sample Throughput | 12 samples per run |
| Sample Load Volume | 1 mL to unlimited |
| Wetted Materials | Stainless steel (316), PTFE, borosilicate glass |
| Pressure Output Range | 0–30 psi (0–2.07 bar) |
| Input Max | 100 psi (6.9 bar) |
| Valve Type | Non-metallic 12-position rotary valve |
| Syringe Pump Volume | 10 mL per channel |
| Positioning Accuracy | ±0.1 mm |
| Liquid Handling Accuracy | ≥99% |
| Fraction Collection Volumes | Standard 15 mL (customizable) |
| Data Interface | USB |
| Operating System Compatibility | Windows XP/7/8 |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | Gop (formerly PRIMA) |
|---|---|
| Origin | Imported |
| Model | PC1600 |
| Cooling Method | Water-Cooled |
| Temperature Range | −10 to 40 °C |
| Temperature Stability | ±0.02 °C @ 37 °C |
| Uniformity | ±0.05 °C @ 37 °C |
| Setpoint Resolution | 0.1 °C |
| Display | 4-digit LED |
| Temperature Control | PID with Hot-Gas Bypass |
| Refrigeration Capacity | 1600 W @ 20 °C |
| Pump Max Pressure | 4 bar |
| Pump Flow Rate | 25 L/min |
| Reservoir Volume | 3 L / 5 L (selectable) |
| Pump Type | Hermetically Sealed Magnetic Drive |
| Drain Valve | Integrated Bottom Drain |
| Communication Interface | Optional RS232/RS485 |
| External Sensor Input | Supported |
| Safety Features | Over-Temperature Cut-Off, Low-Level Dry-Run Protection, High-Accuracy Level Detection, Audible Alarm, Overcurrent Protection |
| Power Supply | 230 V, 1.6 kW, 50/60 Hz |
| Dimensions (L×W×H) | 450 × 600 × 800 mm |
| Continuous Operation Mode | Yes |
| Brand | GP |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ED20 |
| Instrument Type | Electric Heating Acid Evaporation System |
| Heating Plate Compatibility | Designed for use atop standard laboratory electric hot plates |
| Sample Capacity | 20 positions |
| Well Diameter | 40 mm (custom diameters available) |
| Working Surface Dimensions | 280 × 300 mm |
| Heating Block Material Options | Anodized Aluminum or Graphite |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | GPC 1000 |
| Quotation | Upon Request |
| Flow Rate | Not Applicable (Fixed-Volume Fraction Collection Mode) |
| Maximum Pressure | Not Specified |
| Flow Stability | Not Specified |
| Auto-Sampler Volume Range | Up to 10 mL per injection |
| Auto-Sampler Capacity | Configurable via modular rack system |
| Brand | ZXYIQI |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GPSK-200mL |
| Capacity | 200 mL |
| Vessel Material | 304/316L Stainless Steel |
| Maximum Operating Pressure | 40 MPa |
| Vacuum Capability | −0.1 MPa |
| Operating Temperature Range | 0–400 °C |
| Stirring Speed | 0–1000 rpm |
| Window Material | Sapphire (standard), optional Quartz or Tempered Glass |
| Window Position | Top and/or side-mounted |
| Sealing Type | Dual-stage (soft + hard metal seal) |
| Heating Method | Embedded modular heater |
| Temperature Control | PID-based dual-loop intelligent control |
| Temperature Accuracy | ±1 °C |
| Pressure Indication | Analog or digital gauge (domestic or imported) |
| Safety Features | Overtemperature/overpressure auto-alarm, rupture disc (Hastelloy), programmable timer (0–999 min/h) |
| Power Supply | 220 V AC / 110 V AC (configurable) |
| Customization | Available for vessel geometry, lining (PTFE, PPL, quartz), ports, and instrumentation |
| Brand | ZXYIQI |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GPSK |
| Capacity | 100 mL |
| Vessel Material | Stainless Steel (304/316L standard) |
| Operating Pressure Range | Up to 40 MPa |
| Vacuum Level | ≤ –0.1 MPa |
| Temperature Range | 0–400 °C |
| Heating Method | Embedded Modular Heater |
| Control System | PID Dual-Loop Temperature Control |
| Stirring Speed | 0–1000 rpm |
| Sealing | Hybrid Soft/Hard Seal (Alloy Face + Elastomer Gasket) |
| Safety Features | Overpressure Rupture Disc (Hastelloy), Overtemperature/Overtime Alarm, Acoustic & Visual Alert |
| Window Material | Sapphire (Standard), Optional Quartz or Tempered Glass |
| Window Position | Top-Mounted or Side-Mounted |
| Stirring Type | Magnetic Suspension Drive |
| Internal Lining Options | PTFE, Quartz, PPL, or Steel-Lined |
| Power Supply | 220 V / 110 V AC |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GR 1300/13 |
| Quotation | Upon Request |
| Max Temperature | 1300 °C |
| Heating Length | 1300 mm |
| Heating Zones | 6 independent zones (each 160 mm) |
| Max Achievable Axial Temperature Gradient | 400 °C |
| Internal Dimensions (W×D×H) | 1300 × 100 × 60 mm |
| External Dimensions (W×D×H) | 1660 × 740 × 1345 mm |
| Power Rating | 18 kW |
| Electrical Supply | 3-phase |
| Net Weight | 300 kg |
| Heating Method | Radiant heating via resistance wire wound on ceramic support tubes |
| Loading Access | Top or front door |
| Optional Accessory | Ceramic fiber partition boards for zone isolation |
| Brand | Grabner |
|---|---|
| Origin | Austria |
| Model | Mobile LAB |
| Vehicle Integration | Custom Chassis Options |
| Power Supply | Dual-mode (110/240 V AC + Rechargeable Battery) |
| Environmental Control | Independent HVAC with 20 air changes/hour |
| Safety | Seismic-grade instrument mounting, anti-slip flooring, fire extinguisher, dedicated waste/fresh water tanks |
| Data Infrastructure | Integrated LAN, optional GPS, printer, and PC |
| Compliance | Designed for ASTM D975, D3948, D4865, EN 590, ISO 4214, and USP <1058> analytical instrument qualification frameworks |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | TH-1000 |
| Price | USD 250 (approx.) |
| Dimensions (TH-1000) | 291 × 180 × 265 mm |
| Gradient Volume Capacity | 2000 mL |
| Gradient Profile | Linear Only |
| Dimensions (TH-2000) | 300 × 200 × 300 mm |
| Gradient Volume Capacity | 4000 mL |
| Brand | Grant |
|---|---|
| Origin | United Kingdom |
| Model | BT5D |
| Temperature Range | Ambient +10 to 400 °C |
| Display | LED |
| Temperature Resolution | 1 °C |
| Stability | ±0.5 °C up to 300 °C |
| Uniformity | ±2 °C at 200 °C, ±3 °C at 300 °C, ±4 °C at 400 °C |
| Heating Rate Control | 0.1 °C/min adjustable |
| Timer Range | 1–999 minutes |
| Power | 750 W |
| Voltage | 230 V AC |
| Dimensions (W×D×H) | 410 × 205 × 150 mm |
| Block Material | Anodized Aluminum |
| Safety | Adjustable Over-Temperature Protection |
| Compliance | CE, UKCA, RoHS |
| Brand | Grant |
|---|---|
| Origin | UK |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BTD |
| Price | Upon Request |
| Temperature Range | Ambient +5°C to 100°C |
| Setpoint Range | 25°C to 100°C |
| Stability @37°C | ±0.1°C |
| Uniformity @37°C | ±0.2°C |
| Heating Time (25°C → 100°C) | 16 min |
| External Dimensions (W×D×H) | 210 × 230 × 110 mm |
| Block Diameter/Depth | 130 × 45 mm |
| Power Rating | 200 W |
| Timer Range | 1 min – 96 h |
| Over-Temperature Protection | Thermal Cut-Out Fuse |
| Brand | Grant Instruments (Cambridge, UK) |
|---|---|
| Origin | United Kingdom |
| Model | GD100-S12 |
| Temperature Range | 0–100 °C |
| Stability @37 °C | ±0.02 °C |
| Uniformity @37 °C | ±0.05 °C |
| Set/Display Resolution | 0.1 °C |
| Bath Volume | 12 L |
| Internal Dimensions (L×W×H) | 325×300×150 mm |
| External Dimensions (L×W×H) | 350×325×175 mm |
| Overall Height (incl. controller) | 355 mm |
| Heating Power | 1.4 kW (240 V) / 1.3 kW (115 V) |
| Input Voltage | 230 V AC, 50–60 Hz or 120 V AC, 50–60 Hz |
| Safety | Float-switch low-level cut-off |
| Calibration | Two-point user calibration supported |
| Display | 4-digit, 13 mm red LED |
| Preset Memory | 4 temperature values |
| Optional Accessories | C1G immersion cooler, PL12 curved lid, VR tube rack, RS14 lift platform, PS20 polypropylene beads |