Common Laboratory Equipment
Filter
Showing 991–1020 of 4952 results
| Brand | Autosense |
|---|---|
| Origin | Tianjin, China |
| Model | MTN-2800W |
| Heating Method | Water Bath |
| Temperature Range | Ambient +5°C to 100°C |
| Temperature Stability | ±0.1°C |
| Tube Diameter Compatibility | 13–19 mm |
| Nitrogen Flow Rate | 0–15 L/min |
| Sample Positions | 12 / 24 / 40 |
| Heating Power | 350 W |
| Over-Temperature Protection | 110°C |
| Timer Range | 0–99 h 59 min |
| Display | Dual digital display for set/actual temperature and timer modes (count-up/count-down) |
| Dimensions (W×H×D, main unit only) | 240 × 130 × 215 mm |
| Heating Block Size | 210 × 95 × 150 mm |
| Power Supply | 220 V / 50 Hz |
| Brand | Autosense |
|---|---|
| Origin | Tianjin, China |
| Model | MTN-2810D |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5°C to 300°C |
| Temperature Stability | ±0.1°C |
| Sample Capacity | 8 or 12 positions |
| Tube Diameter Compatibility | 10–29 mm |
| Nitrogen Flow Rate | 0–15 L/min |
| Heating Power | 1350 W |
| Timer Range | 10 min to 99 h 59 min |
| Over-Temperature Protection | Dual-mode (upper-limit & deviation-based) |
| Temperature Output Interface | Analog signal output (0–5 V or 4–20 mA, configurable) |
| Dimensions (W×L×H, excluding support rod) | 268 × 230 × 165 mm |
| Operating Ambient | 5–35°C |
| Power Supply | 220 V / 50 Hz |
| Brand | Autosense |
|---|---|
| Origin | Tianjin, China |
| Model | MTN-5800D Electric |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 96 °C (water) |
| Temperature Stability | ±0.2 °C |
| Sample Capacity | 12-position (for vessels Φ30–55 mm) / 24-position (for tubes Φ10–29 mm) |
| Gas Flow Rate | 0–25 L/min (adjustable) |
| Heating Power | 1000 W |
| Vertical Travel | Sample Tray 0–100 mm |
| Internal Tank Dimensions | Φ320 × H170 mm |
| Overall Dimensions | Φ355 × L402 × H620 mm |
| Display | LCD |
| Gas Consumption per Needle | 330 mL/min |
| Water Level Sensor | Integrated with auto-shutoff and alarm |
| Drain Valve | Yes |
| Needle Options | Disposable polypropylene or stainless steel |
| Flow Visualization | Float-type gas flow meter |
| Sample Holder Rotation | 360° continuous |
| Brand | Autosense |
|---|---|
| Model | WB Series |
| Temperature Range | Ambient to 90 °C |
| Temperature Stability | ±0.2 °C |
| Temperature Setting Resolution | 0.1 °C |
| Over-Temperature Protection Range | 25–130 °C |
| Heating Power | 1000 W |
| Oscillation Frequency | 40–100 Hz/min |
| Oscillation Amplitude | 18 mm (horizontal) |
| Bath Capacity | 20 L |
| External Dimensions | 600 mm × 300 mm × 300 mm (W × D × H) |
| Timer Range | 10–90 min |
| Display | Dual 4-digit LED (set & actual temperature) |
| Brand | AUWII® |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Regional Classification | Domestic (China) |
| Model | AR Series Industrial Circulating Chiller |
| Instrument Type | Integrated Unit |
| Cooling Method | Air-Cooled |
| Temperature Control Range | 5–35 °C |
| Refrigeration Capacity | 18–190 kW |
| Temperature Stability | ±1 °C |
| Circulating Pump Pressure | 19–55 m H₂O |
| Circulating Pump Flow Rate | 1–32 m³/h |
| Reservoir Volume | 150–900 L |
| Operating Principle | Compressor-Based Vapor-Compression Refrigeration |
| Brand | Avantium |
|---|---|
| Origin | Netherlands |
| Model | Flowrence® |
| Maximum Operating Pressure | 200 bar |
| Maximum Operating Temperature | 850 °C |
| Catalyst Bed Volume | 25–1000 µL |
| Number of Parallel Reactors | 16 (4 modules × 4 reactors) |
| Reactor Inner Diameter | 2.0–2.6 mm |
| Isothermal Zone Length | 5–15 cm (standard), up to 50 cm (custom) |
| Feed Configuration | Up to 5 gases + 2 liquids |
| Catalyst Form | Extrudates (intact or crushed) |
| Downstream Phase Separation | Capillary-free gas–liquid separation |
| Automated Liquid Sampling | Integrated |
| Temperature Control | Independent per module (4 zones) |
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Model | EF-B15 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 335 × 280 × 650 mm |
| Sample Volume per Cycle | 3–15 mL |
| Construction Material | 316L Stainless Steel |
| Sterilization | Steam-Sterilizable |
| Cooling Option | Optional Heat Exchanger |
| Pressure Adjustment | Continuously Variable |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Model | EmulsiFlex |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 335 × 280 × 650 mm |
| Processing Volume Range | 15–1,000,000 mL |
| Wetted Materials | Metal-to-Metal & Metal-to-Ceramic Seals Only |
| Sterilization | SIP-Compatible (Steam-in-Place), All Wetted Parts Autoclavable |
| Temperature Control | Stainless Steel Heat Exchanger Included |
| Regulatory Compliance | Designed for GLP/GMP Environments, Supports 21 CFR Part 11 Audit Trail Configuration (via optional software package) |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Model | B15 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 335 × 280 × 650 mm |
| Sample Volume Range | 3–15 mL |
| Operating Pressure | 45,000 psi (3,100 bar) |
| Air Supply | 5–10 bar |
| Residual Volume | < 0.1 mL |
| Drive Mechanism | Pneumatic Single Plunger |
| Weight | 37 kg |
| Construction Material | ASTM-certified 316L stainless steel |
| Compliance | FDA-compliant materials, GMP-compatible design, no elastomeric seals in product path |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Model | EmulsiFlex-C3 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 530 × 460 × 760 mm |
| Processing Volume Range | 7–3000 mL |
| Maximum Operating Pressure | 200 MPa (30,000 psi) |
| Sterilization | Direct Steam-in-Place (SIP) |
| Construction Materials | FDA-compliant 316L stainless steel |
| Compliance | Designed for GMP environments, SIP-capable, seal-free fluid path |
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Model | EF-C3 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 530 mm × 460 mm × 760 mm |
| Processing Capacity | 0.07–3 L/h |
| Maximum Pressure | 30,000 psi |
| Minimum Sample Volume | 7 mL |
| Sterilization | Autoclavable & SIP-Compatible (Steam-in-Place) |
| Construction | Metal-to-Metal & Metal-to-Ceramic Seals, O-Ring-Free Fluid Path |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Manufacturer | Avestin Inc., Ottawa, Canada |
| Model | EmulsiFlex-C5 |
| Instrument Type | High-Pressure Homogenizer |
| Operating Pressure Range | 500–30,000 psi (3.4–207 MPa) |
| Sample Volume Range | 7–5,000 mL |
| Flow Rate | 1–5 L/h |
| Dimensions (W×D×H) | 100 × 200 × 300 mm |
| Drive System | Pneumatic Single Plunger |
| Homogenizing Valve | Wear-Resistant Ceramic |
| Temperature Control Range | −25 to 200 °C (via external bath) |
| Sterilization | SIP (Steam-in-Place) and CIP (Clean-in-Place) compliant |
| Materials | Electropolished 316L stainless steel and FDA-compliant ceramic components |
| Regulatory Compliance | Designed and validated per GMP, FDA 21 CFR Part 11 (audit trail capable), ISO 13485, and USP <1043> for sterile processing equipment |
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Model | EF-C5 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 430 × 160 × 320 mm |
| Processing Capacity | 7 mL – 5 L/h |
| Maximum Pressure | 30,000 psi |
| Sterilization | Fully Autoclavable & SIP-Compatible |
| Valve Design | Metal-to-Metal / Metal-to-Ceramic Sealing |
| Power Requirement | None (Hydraulically Actuated) |
| Temperature Control | Integrated Jacketed System |
| Optional Integration | In-Line Extrusion Module with 50/100/200/400 nm Track-Etched Membranes |
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Model | EmulsiFlex-C50 |
| Maximum Operating Pressure | 30,000 psi (200 MPa) |
| Flow Rate | 15–50 L/h |
| Minimum Sample Volume | 25 mL |
| Drive Type | Pneumatic Dual-Piston |
| Chamber Material | ASTM-certified 316L stainless steel |
| Sterilization | In-line steam sterilization (SIP) |
| Compliance | FDA-compliant materials, GMP-compatible design |
| Dimensions (W×D×H) | 450 × 760 × 500 mm |
| Sample Compatibility | Aqueous & organic suspensions, liposomes, emulsions, nanocrystals, cell lysates |
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Manufacturer | Avestin Inc., Ottawa, Canada |
| Model | EmulsiFlex-C55 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 600 × 430 × 540 mm |
| Processing Volume Range | 30–55,000 mL |
| Maximum Operating Pressure | 30,000 psi (207 MPa) |
| Flow Rate | Up to 55 L/h |
| Minimum Sample Volume | 7 mL |
| Drive Mechanism | Pneumatic Dual-Piston |
| Material Construction | Electropolished ASTM F899 316L Stainless Steel |
| Sterilization | SIP/CIP-Compatible Design |
| Regulatory Compliance | FDA 21 CFR Part 11–ready architecture, GMP-compliant construction, USP <1043> and <1207> aligned |
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Manufacturer | Avestin Inc., Ottawa, Canada |
| Model | EmulsiFlex-D20 |
| Instrument Type | High-Pressure Homogenizer |
| Operating Pressure | 35,000 psi (2,413 bar), typical working pressure up to 30,000 psi (2,070 bar) |
| Flow Rate | 20 L/h |
| Minimum Sample Volume | 50 mL |
| Residual Volume | < 1 mL |
| Drive System | Electric single-plunger pump |
| Dimensions | 730 × 600 × 640 mm |
| Weight | 120 kg |
| Power Supply | 3-phase, 50/60 Hz, 230/400 V |
| Safety Features | Automatic circuit cutoff, transient overpressure tolerance up to +20% |
| Construction Material | 316L stainless steel (entire fluid path) |
| Compliance | GMP-compliant design, FDA-compliant materials per 21 CFR Part 11 and USP <1058>, zero elastomeric seals in product-contact zones |
| Optional Accessories | Sterile filtration extruder, integrated heat exchanger |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Model | LF-1 |
| Type | Manual Piston-Driven Extrusion Device |
| Dimensions (W×D×H) | 280 × 40 × 40 mm |
| Sample Volume Range | 0–1 mL |
| Membrane Compatibility | Polycarbonate (PC) Track-Etched Filters (common pore sizes: 100 nm, 200 nm, 400 nm, 800 nm, 1 µm) |
| Construction | Stainless Steel Housing & Anodized Aluminum Components |
| Residual Volume | < 5 µL |
| Regulatory Compliance | Designed for GLP-compliant lab environments |
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Model | LF-50 |
| Instrument Type | High-Pressure Extrusion System |
| Dimensions (W×D×H) | 280 × 460 × 260 mm |
| Sample Volume Range | 5–50 mL per run |
| Compatible Membrane Pore Sizes | 10 nm – 1.0 µm (polycarbonate track-etched membranes) |
| Maximum Operating Pressure | 10,000 psi (69 MPa) |
| Material Contact Path | 316 Stainless Steel, PTFE, and Anodized Aluminum |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Model | LiposoFast LF1 |
| Actuation | Manual |
| Sample Volume per Extrusion | 1 mL (2 × 500 µL syringes) |
| Minimum Sample Volume | 0.1 mL |
| Residual Volume | 0 µL |
| Available Membrane Pore Sizes | 50, 100, 200, 400, 800, and 1000 nm |
| Optional Temperature Control | Water-bath compatible |
| Weight | <2 kg |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Model | LipoSofast |
| Sample Volume per Cycle | 1 mL (2 × 500 µL syringes) |
| Minimum Sample Volume | 0.1 mL |
| Residual Volume | 0 µL |
| Available Polycarbonate (PC) Membrane Pore Sizes | 50, 100, 200, 400, and 800 nm |
| Temperature Compatibility | Water-bath compatible for thermal control (e.g., 4–40 °C) |
| Weight | < 2 kg |
| Construction | Borosilicate glass syringes, stainless steel housing, chemically resistant seals |
| Brand | AVIDITY |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported |
| Model | Cascada II.I |
| Pricing | Upon Request |
| Purified Water Grade | ASTM Type I (Ultra-Pure) |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Total Organic Carbon (TOC) | <5 ppb |
| Microbial Count | <0.1 CFU/mL |
| Endotoxin Level | <0.001 EU/mL |
| Particulates (>0.2 µm) | <1 particle/mL |
| Brand | AWA |
|---|---|
| Model | AWA5000 |
| Compliance | GB/T 3785.1–2023 / IEC 61672-1:2013 Class 1 |
| Standard Conformance | HJ 907–2017 |
| Dynamic Range | 123 dB |
| Display | 4.3-inch capacitive touchscreen |
| Internal Storage | 16 GB (expandable to 64 GB via microSD) |
| Communication | Wi-Fi, 4G LTE, Bluetooth |
| Positioning | Integrated GPS + network-assisted positioning |
| Audio Recording | High-fidelity time-stamped PCM recording |
| Frequency Analysis | Real-time 1/1 and 1/3-octave band analysis |
| Power Supply | Integrated outdoor-rated power management system |
| Optional Modules | Meteorological sensor suite, traffic flow counter, PTZ camera, LED display panel, acoustic source localization unit |
| Brand | Hangzhou Aihua |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AWA2000 |
| Pricing | Available Upon Request |
| Translation Stage | Consult Manufacturer |
| Brand | AWL |
|---|---|
| Origin | United Kingdom |
| Model | CFC15 |
| Temperature Range | Ambient to 80 °C (standard configuration) |
| Temperature Control Accuracy | < 0.5 °C |
| Filtration Throughput Options | 2.5 L/h, 6.5 L/h, 25 L/h |
| Filter Media Pore Size | 2–40 µm |
| Filter Disc Material | 316L Stainless Steel or Hastelloy® |
| Operating Vacuum | < 40 mbar (absolute) |
| Compressed Air Requirement | 4–6 bar, 1.0 L/min |
| Wetted Materials | Fully customizable per application |
| Compliance | ISO 9001 certified design and manufacturing |
| Regulatory Alignment | Supports GLP/GMP workflows with audit-ready operation logs |
| Brand | Axetris |
|---|---|
| Origin | Switzerland |
| Model | EMIRS50_AT06T_BT170 |
| Housing | TO-46 metal can with protective cap |
| Emission Spectrum | 2–14 µm (blackbody-like) |
| Modulation Capability | Electrical (chopper-free) |
| Window Options | Sapphire or Barium Fluoride (BaF₂) |
| Typical Radiant Power | ~15 mW @ 5 V |
| Thermal Time Constant | < 10 ms |
| Operating Voltage Range | 3.3–6 V DC |
| Lifetime | > 50,000 hours (at rated conditions) |
| MEMS Structure | Silicon-based microheater with dielectric emissive coating |
| Brand | AXIS-TEC |
|---|---|
| Origin | USA |
| Model | PE-100 |
| RF Frequency | 13.56 MHz |
| RF Power | 0–300 W (automatically adjustable) |
| Chamber Dimensions | 305 × 368 × 305 mm (L×D×H) |
| Chamber Volume | 34 L |
| Chamber Material | T6-aluminum monolithic construction |
| Operating Pressure Range | 1–2000 mTorr |
| Gas Flow Control | 0–50 sccm with precision needle valve |
| Vacuum Gauge | Pirani gauge (0–1 Torr) |
| Gas Inlet | Single or multi-channel configurable |
| Control System | PLC-based HMI automation |
| Configuration Options | Plasma cleaning, isotropic plasma etching, anisotropic RIE, and switchable mode architecture |
| Brand | AXIS-TEC |
|---|---|
| Origin | USA |
| Model | PE-75 |
| RF Frequency | 13.56 MHz |
| Power Output | 0–150 W (automatically regulated) |
| Chamber Dimensions | Cylindrical, ID 273 mm × Depth 254 mm |
| Chamber Volume | 13.8 L |
| Chamber Material | T-6 Aluminum Monolithic Construction |
| Operating Gas | Single- or Multi-Gas Inlet |
| Vacuum Range | 1–2000 mT (via Pirani gauge, 0–1 Torr) |
| Gas Flow Control | 0–25 sccm with Precision Needle Valve |
| Control Mode | Fully Automated |
| Brand | AXIS-TEC |
|---|---|
| Origin | USA |
| Model | PlasmaSTAR100 / PlasmaSTAR200 |
| RF Frequency | 40 kHz (LF) or 13.56 MHz |
| RF Power | 600 W |
| Chamber Volume | 10 L |
| Chamber Material | Anodized Aluminum |
| Maximum Substrate Size | 8-inch wafer |
| Process Gas Pressure | 10 PSI |
| Control Interface | Touchscreen PC with Multi-step Programmable Logic |
| Vacuum System | Rotary Vane Pump (standard), optional Roots-boosted configuration |
| Gas Delivery | Mass Flow Controllers (MFCs) standard, downstream pressure controller optional |
| Brand | AYAN |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-100LB |
| Nitrogen Purity | 99.999% |
| Output Flow | 100 L/min |
| Output Pressure | 0.6 MPa |
| Power Supply | 380 V ±10%, 50 Hz ±5% |
| Noise Level | ≤65 dB(A) |
| Dimensions (W×D×H) | 1400 × 950 × 1300 mm |
| Weight | 380 kg |
| Principle | Pressure Swing Adsorption (PSA) |
| Integrated Components | Air Compressor, Refrigerated Dryer, Multi-Stage Filtration System, Carbon Molecular Sieve (CMS) Adsorption Towers, N₂ Buffer Tank, Real-Time Purity Analyzer & Flow Meter |
| Brand | AYAN |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-20L |
| Nitrogen Generation Principle | Imported Hollow-Fiber Membrane Separation |
| Output Flow Rate | 20 L/min |
| Output Pressure | 0.6 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | -40 °C |
| Compliance | CE-marked design (intended for lab use under ISO 8573-1 Class 3/4 air quality input) |