Constant Temp/Heating/Drying Equipment
Filter
Showing 2581–2610 of 3277 results
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Equipment Category | Domestic |
| Model | HX-1005 |
| Instrument Type | Constant-Temperature Bath Circulator |
| Circulation Mode | Internal & External Loop |
| Temperature Control | Refrigeration & Heating Dual-Mode |
| Bath Volume | 5 L |
| Temperature Range | −5 °C to 99 °C |
| Temperature Stability | ±0.05 °C |
| Temperature Resolution | 0.01 °C |
| Total Power Input | 1.5 kW |
| Power Supply | 220–240 V~, 50 Hz |
| Brand | The Great Wall |
|---|---|
| Model | HX-2505G |
| Temperature Range | −25 °C to 200 °C |
| Temperature Stability | ±0.2 °C |
| Display Resolution | 0.1 °C |
| Heating Power | 1.1 kW |
| Refrigeration Capacity | 0.07 kW @ −25 °C to 0.5 kW @ 200 °C |
| Pump Flow Rate | ≤10 L/min |
| Pump Pressure | ≤0.2 bar |
| Bath Volume | 6 L |
| External Port | M16×1 |
| Dimensions (W×D×H) | 376×554×740 mm |
| Weight | 50 kg |
| Power Supply | 220–240 V~, 50 Hz |
| IP Rating | IP20 |
| Refrigerant | R404A |
| Ambient Operating Conditions | 5–35 °C, ≤70% RH |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SY-100-250 |
| Temperature Range | +5 °C above ambient to 250 °C |
| Temperature Stability | ±0.5 °C |
| Circulation Flow Rate | 120 L/min |
| Maximum Pressure | 1.5 bar |
| Heating Power | 12 kW |
| Total Power Consumption | 12.75 kW |
| Pump Power | 750 W |
| Heat Transfer Fluid Capacity | 17 L |
| External Cooling Interface | R2 3/4 |
| Power Supply | 3-phase, 380 V, 50 Hz |
| IP Rating | IP20 |
| Pollution Degree | 2 |
| Dimensions (W×D×H) | 640×940×1585 mm |
| Weight | 185 kg |
| Safety Protections | Overtemperature, leakage current, thermal overload, phase sequence, and overcurrent protection |
| Heat Transfer Medium | Thermal oil |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SY-20 |
| Instrument Type | Water/Oil Bath |
| Circulation Mode | Internal & External |
| Temperature Control | Heating-Only |
| Bath Volume | 20 L |
| Temperature Range | RT + 5 °C to 200 °C |
| Temperature Stability | ±0.5 °C |
| Power Supply | 220–240 V, 50 Hz |
| Heating Power | 2450 W |
| Circulation Pump Power | 280 W |
| Rated Flow Rate | 30 L/min |
| Maximum Pressure | 1 bar |
| External Port Size | 3/4" |
| Bath Material | SUS304 Stainless Steel |
| Opening Dimensions | Φ350 × 220 mm |
| Overall Dimensions (W×D×H) | 505 × 420 × 735 mm |
| Net Weight | 28 kg |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SY-20-160 |
| Instrument Type | Constant-Temperature Bath Circulator |
| Circulation Mode | External Circulation |
| Temperature Control | Heating-Only |
| Bath Volume | 20 L |
| Temperature Range | Ambient +5 °C to 160 °C |
| Temperature Stability | ±1 °C |
| Control Method | PID |
| Display | LCD Panel |
| Safety Features | Over-Temperature Alarm, Overload Protection, Over-Current Protection |
| Construction | Stainless Steel Fluid Path |
| Cooling Interface | Dedicated Inlet/Outlet for External Cooling Water |
| System Design | Fully Sealed Closed-Loop Circulation |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SY-20-250 |
| Instrument Type | Water/Oil Bath |
| Circulation Mode | Internal & External |
| Temperature Control | Heating-Only |
| Bath Volume | 20 L |
| Temperature Range | RT + 5 °C to 250 °C |
| Temperature Stability | ±0.5 °C |
| Max Flow Rate | 42 L/min |
| Max Pressure | 2.8 bar |
| Circulation Port Size | 3/4" |
| Heat Transfer Fluid Capacity | 9 L |
| Heating Power | 3 kW |
| Circulation Pump Power | 370 W |
| Ambient Temp Range | 5–40 °C |
| Ambient Humidity | ≤60% RH |
| Power Supply | 220–240 V~, 50 Hz |
| Dimensions (W×D×H) | 430 × 690 × 1075 mm |
| Weight | 60 kg |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SY-20-250D |
| Instrument Type | Constant-Temperature Bath |
| Circulation Mode | Internal & External Loop |
| Temperature Control | Heating-Only |
| Temperature Range | 5–250 °C |
| Temperature Stability | ±0.5 °C |
| Power Supply | 220–240 V~, 50 Hz |
| Maximum Flow Rate | 28 L/min |
| Maximum Pressure | 3.0 bar |
| Circulation Pump Power | 500 W |
| Heating Power | 3 kW |
| Total Power Consumption | 3.5 kW |
| Heat Transfer Fluid Capacity | 9 L |
| External Cooling Interface | R2¾ |
| IP Rating | IP20 |
| Pollution Degree | 2 |
| Dimensions (W×D×H) | 430 × 690 × 1075 mm |
| Weight | 60 kg |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SY-200-200 |
| Temperature Range | +5 °C above ambient to 200 °C |
| Temperature Stability | ±0.5 °C |
| Circulation Flow Rate | 150 L/min |
| Maximum Pressure | 2.5 bar |
| Heating Power | 24 kW |
| Total Power Consumption | 24.75 kW |
| Pump Power | 750 W |
| Heat Transfer Fluid Capacity | 25 L |
| External Cooling Interface | R21 (cooling coil supplied) |
| Power Supply | 3-phase, 380 V, 50 Hz |
| IP Rating | IP20 |
| Pollution Degree | 2 |
| Dimensions (W×D×H) | 610 × 940 × 1590 mm |
| Weight | 240 kg |
| Safety Protections | Independent overtemperature cutoff, earth leakage protection, thermal overload protection, phase sequence monitoring, overcurrent protection |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SY-200-200 |
| Circulation Mode | External Circulation |
| Temperature Control | Heating-Only |
| Temperature Range | Ambient +5 °C to 200 °C |
| Temperature Stability | ±0.5 °C |
| Total Power Consumption | 24.75 kW |
| Supply Voltage | 3-phase, 380 V, 50 Hz |
| Pump Power | 750 W |
| Max Flow Rate | 150 L/min |
| Max Pressure | 2.5 bar |
| Heat Transfer Fluid | Thermal Oil |
| Cooling Coil | Integrated water-cooled coil for auxiliary temperature regulation |
| Reservoir Capacity | 25 L |
| External Port Connection | R21 |
| IP Rating | IP20 |
| Pollution Degree | 2 |
| Dimensions (W×D×H) | 610 × 940 × 1590 mm |
| Weight | 240 kg |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SY-50 |
| Instrument Type | Water/Oil Bath |
| Circulation Mode | Internal & External Circulation |
| Temperature Control | Heating-Only |
| Bath Capacity | 50 L |
| Temperature Range | RT + 5 °C to 200 °C |
| Temperature Stability | ±0.5 °C |
| Power Supply | 3-phase, 380 V, 50 Hz |
| Heating Power | 6000 W |
| Circulation Pump Power | 280 W |
| Rated Flow Rate | 30 L/min |
| Maximum Pressure | 1 bar |
| External Port Size | 3/4" |
| Bath Material | SUS304 Stainless Steel |
| Opening Dimensions | Φ500 × 270 mm |
| Overall Dimensions (W×D×H) | 635 × 550 × 810 mm |
| Net Weight | 40 kg |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | SY-50 |
| Instrument Type | Water/Oil Bath |
| Circulation Mode | Internal & External |
| Temperature Control | Heating-Only |
| Bath Volume | 20 L |
| Temperature Range | RT + 5 °C to 200 °C |
| Temperature Stability | ±0.5 °C |
| Brand | Thermal Technology |
|---|---|
| Origin | USA |
| Type | Horizontal/Vertical Tube Furnace |
| Max Temperature | 2500°C |
| Temperature Uniformity | ±1°C (at 2500°C, full hot zone) |
| Control Accuracy | ±0.1°C |
| Ramp Rate (to max temp) | >100°C/min |
| Cool-down Rate | up to 300°C/min |
| Heating Element | Tungsten Rods |
| Power Rating | 3000 W |
| Atmosphere Options | Vacuum (≤10⁻⁶ Torr), H₂ (wet/dry), NH₃ (dissociated), N₂, Ar, forming gas |
| Chamber Design | Cold-wall, double-jacketed stainless steel |
| Heating Zone Configuration | Multi-layer radiation shields with Mo/W reflective shielding |
| Programmable Controller | Microprocessor-based, 50+ stored recipes, real-time edit capability, alarm logging, RS-485/Ethernet interface |
| Compliance | Designed for GLP/GMP environments |
| Brand | Thermal Technology |
|---|---|
| Origin | USA |
| Model | HP200 |
| Type | Graphite/W-Mo Heating Crucible-Type Hot Press Furnace |
| Max Temperature | 2500 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Max Power | 3000 W |
| Ramp Time to Max Temp | 30 min |
| Heating Elements | Graphite, Tungsten, Molybdenum |
| Internal Chamber Dimensions | 30 cm × 20 cm × 20 cm |
| Maximum Applied Pressure | 100 tons |
| Effective Hot Zone | 24″ × 24″ × 30″ (610 mm × 610 mm × 762 mm) |
| Key | Brand: Thermal Technology |
|---|---|
| Origin | USA |
| Model | Model 1000 |
| Type | Tube Furnace |
| Max Temperature | 3000 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Max Power | 3000 W |
| Heating Rate to Max Temp | 100 °C/min |
| Heating Zone Material | Graphite or Molybdenum |
| Internal Chamber Dimensions | 30 × 20 × 20 cm |
| Atmosphere Options | Vacuum (mechanical pump standard, high-vacuum optional), Ar, N₂, O₂, H₂ |
| Compliance | ASTM E2550, ISO 8573-1 (for gas purity control), GLP-compliant operation architecture |
| Brand | Thermal Technology |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BJ5 |
| Instrument Type | Crucible-Type Arc Melting Furnace |
| Maximum Temperature | >3000 °C |
| Temperature Control Accuracy | ±0.1 °C |
| Maximum Power Supply Requirement | 1000 A DC |
| Heating Rate to Max Temperature | ≤20 min |
| Heating Method | Thoriated Tungsten Electrode Arc Discharge |
| Internal Chamber Dimensions | 23 cm (W) × 24 cm (D) × 29 cm (H) |
| Electrode Diameter | 6.4 mm |
| Water-Cooled Stainless Steel Bell Jar Diameter | 24.4 cm, Height: 29.2 cm |
| Copper Hearth Diameter | 22.9 cm |
| Vacuum Range | 10⁻⁶ Torr (with optional turbomolecular pump) |
| Operating Pressure Range | High vacuum to slight positive pressure (≤1.5 bar gauge) |
| Viewing Port | Quartz window integrated in bell jar top |
| Sample Diameter Range | 13–76 mm |
| System Weight (main unit only) | 20.4 kg |
| Required Cooling Water | 30.4 L/min @ 3.5 bar, 21 °C |
| Vacuum Pump Requirement | ≥56.6 L/min (2 CFM) |
| Inert Gas Flow Range | 56.6–283.2 L/min (2–10 CFM) |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Compact Muffle Furnace |
| Max Operating Temperature | 1000 °C |
| Chamber Lining | Ceramic Fiber Insulation |
| Heating Configuration | Quadrilateral (4-Side) Heating Elements |
| Control System | Silent Solid-State Relay |
| Door Orientation | Side-Opening |
| Exhaust Port | Rear Wall Mounted |
| Safety | EN 60519-2 Compliant Over-Temperature Cut-Off Limiter |
| Accessories Included | Exhaust Chimney, Thermal Safety Limiter |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Compact Tube Furnace |
| Max Operating Temperature | 1100 °C (single-zone) / 1300 °C (triple-zone) |
| Tube Diameter | 200 mm |
| Heating Zone Length | 500 mm (extendable) |
| Heating Element Control | Solid-state relays (1100 °C) or semiconductor controllers (1300 °C) |
| Temperature Uniformity | Optimized via vacuum-formed ceramic fiber insulation |
| Safety Compliance | Overtemperature protection per EN 60519-2 |
| Controller Location | Bottom-mounted for ergonomic access |
| Optional Configurations | Vertical orientation, custom tube materials (quartz, alumina, stainless steel), extended heating zones |
| Brand | ThermConcept |
|---|---|
| Origin | Germany |
| Model | Flip-Open Tube Furnace |
| Max Operating Temperature | 1100 °C |
| Tube Diameter | Ø300 mm |
| Heating Zone Length | Up to 500 mm (extendable) |
| Control Architecture | Single-Zone or Triple-Zone PID |
| Cooling Method | Rapid air-cooling via hinged outer casing |
| Safety Compliance | EN 60519-2 overtemperature protection limiter |
| Mounting | Base-mounted vertical operation |
| Controller Location | Bottom-mounted for ergonomic access |
| Heating Element Control | Solid-state relay-driven |
| Temperature Uniformity | Optimized via axial zoning (triple-zone model) |
| Enclosure Design | Hinged front-opening shell for法兰 and tube insertion |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Forced-Air Drying Oven |
| Temperature Range | +10 °C above ambient to 250 °C (optional up to 300 °C) |
| Chamber Volume | 23–715 L |
| Air Circulation | Motor-driven forced convection with adjustable fan speed |
| Control System | Microprocessor-based controller with LCD display |
| Compliance | IQ/OQ documentation available |
| Optional Accessories | PT100 temperature probe, HEPA inlet filter, observation window with LED lighting (models ≥60 L), door lock (models ≥60 L), left-hinged door (except model 700), stainless steel exterior |
| Construction | Stainless steel chamber and housing |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Vertical-Lift Muffle Furnace |
| Max Operating Temperature | 1600 °C / 1750 °C / 1800 °C |
| Chamber Volume | 2 L (benchtop), 4 L (benchtop), up to 2000 L (industrial vertical) |
| Heating Element | MoSi₂ |
| Insulation | High-purity alumina fiber |
| Construction | Dual-wall stainless steel housing with rear ventilation |
| Lift Mechanism | Motorized base-lift or furnace-bottom lift configuration |
| Optional Features | Inert gas inlet, automatic exhaust flap, protective atmosphere port, reinforced load-bearing base |
| Compliance | Designed per IEC 61000-6-3, EN 60519-1, and applicable parts of ISO/IEC 17025 for laboratory thermal equipment |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | High-Temperature Muffle Furnace |
| Max Operating Temperature | 1500 °C, 1600 °C, 1750 °C, or 1800 °C |
| Chamber Uniformity | ±3 °C (at setpoint) |
| Construction | Dual-wall insulated cabinet with rear ventilation |
| Insulation | High-purity alumina fiber (low thermal conductivity, <0.12 W/m·K at 1000 °C) |
| Heating Elements | Dual-side mounted molybdenum disilicide (MoSi₂) rods |
| Control System | Solid-state relay (SSR) with PID algorithm |
| Temperature Accuracy | ±1 °C (typical, within operating range) |
| Safety Compliance | EN 60519-2 certified overtemperature protection |
| Optional Features | Motorized bottom door, inert gas inlet port, active cooling module, programmable exhaust damper |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | High-Temperature Muffle Furnace |
| Max Operating Temperature | 1400 °C / 1500 °C / 1600 °C |
| Heating Element | Silicon Carbide (SiC) rods, laterally mounted |
| Chamber Lining | Ceramic fiber insulation |
| Enclosure | Dual-wall construction with rear ventilation |
| Door Type | Top-hinged lift door with reinforced fiber seal |
| Base Lining | High-temperature ceramic fiber board |
| Standard Accessories | Ceramic hearth plate |
| Temperature Control | Solid-state relay with PID algorithm |
| Exhaust Port | Integrated vent opening on top |
| Surface Temperature | <60 °C at ambient conditions |
| Compliance | Designed to meet EN 61000-6-3 (EMC), EN 61000-6-2, and general lab safety requirements per DIN VDE 0701-1 |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | KLS 07/11/M (1150 °C) / KLS 05/13/M (1300 °C) |
| Max Operating Temperature | 1150 °C or 1300 °C |
| Chamber Construction | High-purity ceramic muffle liner |
| Heating Configuration | Four-sided embedded heating elements |
| Insulation | Dual-wall steel housing with rear ventilation and low-surface-temperature design |
| Door Type | Top-lifting (KLS 07/11/M) or side-hinged (KLS 05/13/M) with ceramic fiber insulation |
| Control System | Silent solid-state relay temperature controller |
| Safety | EN 60519-2 compliant overtemperature limiter |
| Accessories | Stackable crucibles, ceramic/stainless steel collection trays (1300 °C / 1100 °C max), heat-resistant tongs (300 mm / 500 mm), gloves (600 °C / 900 °C) |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | High-Temperature Muffle Furnace |
| Max Operating Temperature | 1600 °C / 1750 °C / 1800 °C (configurable) |
| Chamber Volume | 16 L – 70 L |
| Heating Element | Dual-side MoSi₂ (optional rear-wall configuration) |
| Chamber Lining | High-purity alumina fiber insulation |
| External Casing | Polished stainless steel (AISI 304) |
| Door Mechanism | Parallel-guided safety door |
| Cooling | Optional forced-air cooling system |
| Exhaust | Top-mounted vent port with optional automatic exhaust lid |
| Atmosphere Options | Inert gas inlet (N₂, Ar), manual or programmable gas mixing module |
| Control System | Silent solid-state relay regulation with ±1 °C temperature stability (at setpoint) |
| Compliance | Designed per EN 61000-6-3 (EMC), EN 61000-6-2, and IEC 61010-1 for laboratory equipment safety |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | MoSi2 |
| Max Operating Temperature | 1700 °C / 1800 °C (short-term) |
| Tube Diameter Range | 38–75 mm |
| Heating Zone Length | 200–400 mm |
| Standard Tube Material | C799 ceramic |
| Insulation | Vacuum-formed high-purity alumina-silica fiber |
| Heating Element | Parallel-mounted MoSi₂ rods |
| Control | Solid-state semiconductor controller |
| Enclosure | Dual-wall housing with rear ventilation |
| Safety | EN 60519-2 compliant overtemperature limiter |
| Optional Configurations | Three-zone temperature control, vertical orientation with base stand, water-cooled flanges, gas-tight stainless steel flanges, manual/automated gas supply systems, internal water-cooling for rapid cooldown |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | Natural Convection Drying Oven |
| Temperature Range | +5 °C above ambient to 250 °C |
| Max Operating Temperature | 250 °C |
| Chamber Volume | 55–715 L |
| Control System | Microprocessor-based controller with LCD display |
| Compliance | IQ/OQ documentation available |
| Safety Features | Overtemperature protection, insulated double-wall construction, door lock mechanism |
| Optional Accessories | Observation window with LED lighting, PT100 temperature probe, software interface, ducting ports (Ø25/50/100 mm), left-hinged door (except model 700) |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | T-Series |
| Max Operating Temperature | 1100 °C / 1200 °C / 1300 °C |
| Chamber Lining | Ceramic Fiber Insulation |
| Heating Configuration | Dual-Side & Top Radiant Heating (Ceramic Tube-Mounted Elements) |
| Control System | Silent Solid-State Relay with PID Regulation |
| Safety Compliance | EN 60519-2 Overtemperature Protection |
| Optional Features | Exhaust Chimney (with/without Fan & Catalyst), Inert Gas Inlet, Mobile Floor Stand, Forced-Air Circulation Kit |
| Chamber Uniformity | ±3 °C at Setpoint (typical, per ISO 8573-1 reference methodology) |
| External Surface Temperature | <55 °C at max operating temperature |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | TC-UF Series (1100 °C / 1200 °C variants) |
| Temperature Range | Up to 1100 °C or 1200 °C |
| Construction | Stainless steel exterior, high-purity ceramic fiber insulation |
| Heating Element | Embedded resistance wire in ceramic heating plates |
| Control System | Silent solid-state relay with PID temperature regulation |
| Safety | Dual-stage overtemperature protection per EN 60519-2 |
| Exhaust Options | Optional exhaust chimney with fan and catalytic converter |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | Thermconcept |
|---|---|
| Origin | Germany |
| Model | TCC-Series |
| Control Architecture | Microprocessor-Based PID with Optional Siemens S7 PLC Integration |
| Display | Graphical LCD Interface |
| Expandability | Modular I/O, Software Integration (TCC-View), Remote Monitoring Capability |
| Compliance | DIN ISO 9001 Process Control Requirements, Supports GLP/GMP Data Integrity Protocols (with Audit Trail Enabled Software Option) |
| Power Control | Solid-State Relays / SCR Phase-Angle Control / Multi-Zone DC-Driven Heating Management |
| Connectivity | RS485/Modbus RTU, Ethernet (Optional), USB Data Export |
| Brand | Thermo Fisher |
|---|---|
| Origin | USA |
| Model | F6000-60 / F30400-60 |
| Temperature Range | 100–975 °C |
| Chamber Volume | 15 L or 45 L |
| Air Flow Control | 0–80 L/min (adjustable via front-mounted flowmeter) |
| Temperature Stability at 750 °C | ±3 °C |
| Heating Rate | 8 °C/min (≤500 °C), 6 °C/min (500–750 °C) |
| Compliance | ASTM D3174 |
| Gas Inlet Ports | 1 × 0.95 cm thermocouple port, 1 × 0.635 cm or 0.876 cm soft-hose barb for inert gas supply |
| Control Options | B1 (single-setpoint), C1 (8-segment single program), D1 (16-segment × 4 programs, RS232 interface) |