Corrosion Tester
Filter
Showing all 18 results
| Brand | Apure |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | FCY-100 |
| Price | USD 605 (converted from ¥4,250 at 1 USD ≈ ¥7.03) |
| Display | 192×64 dot-matrix LCD |
| Enclosure | Panel-mount housing |
| Power Supply | 24 VDC, 0.5 A |
| Power Consumption | ≤10 W |
| Measurement Range | 0.001–1.000 mm/a |
| Accuracy | ±0.001 mm/a |
| Response Time | 1 min |
| Output Signal | Isolated 4–20 mA current loop |
| Protection Rating | IP65 |
| Dimensions (H×W×D) | 144×144×90 mm |
| Panel Cutout | 138×138 mm |
| Weight | 0.8 kg |
| Operating Temperature | 0–50 °C |
| Relative Humidity | <85% RH (non-condensing) |
| Magnetic Interference | Minimal ambient magnetic fields beyond Earth’s geomagnetic field |
| Key | Brand: Caikon |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic Instrument |
| Model | CKJF-4G |
| Price Range | USD 2,650 – 2,950 |
| Compliance | GB/T 4334–2020, ASTM A262–2015 |
| Heating Capacity | 2000 W total (4 × 500 W independent stations) |
| Max Operating Temperature | 400 °C |
| Simultaneous Samples | 4 |
| Control System | PLC + PID with touchscreen HMI |
| Cooling | Integrated reflux condensation system (no external water source required) |
| Safety Features | Dry-run alarm, overtemperature cutoff, power-interruption resume function |
| Brand | CorrTest |
|---|---|
| Model | CST1808 |
| Measurement Channels | 4 |
| Impedance Range | 10³ Ω to 10¹⁰ Ω |
| Input Impedance | ≥10¹² Ω |
| Frequency Range | 10 Hz to 100 kHz |
| AC Signal Amplitude | 10 mV to 1000 mV |
| Data Storage | 8 MB (up to 100,000 records) |
| Communication | RS485 with standard Modbus RTU protocol |
| Power Supply | DC 12 V |
| Dimensions | 180 mm × 130 mm × 60 mm |
| Weight | 1.0 kg |
| Operating Temperature | −20 °C to +60 °C |
| Operating Humidity | ≤95% RH (non-condensing) |
| Enclosure Material | Engineering-grade weather-resistant polymer |
| Ingress Protection | IP67 |
| Probe Interface | Dual-electrode (ring-disk or substrate-coupled configuration) |
| Brand | CorrTest |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CST1840 |
| Measurement Principle | Electrochemical Impedance Spectroscopy (EIS) & Current-Constraint Method |
| Channels | 4 |
| Input Impedance | 10¹¹ Ω |
| Corrosion Rate Range | 0.001–10 mm/a |
| Open-Circuit Potential Range | −2.5 V to +2.5 V vs. reference electrode |
| Soil Resistivity Range | 10 Ω to 100 kΩ |
| Accuracy | ±1% of reading |
| Timing Interval | 1–255 hours |
| Real-Time Clock Drift | <1 min/month |
| Onboard Storage | 16 MB Flash (≥5,000 measurement sets) |
| Communication | RS-485, Modbus RTU protocol |
| Power Supply | DC 12 V |
| Dimensions | 180 × 130 × 60 mm |
| Weight | 1.0 kg |
| Operating Temperature | −20 °C to +60 °C |
| Relative Humidity | ≤80% RH (non-condensing) |
| Brand | CorrTest |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic Instrument |
| Model | CST400C |
| Pricing | Available Upon Request |
| AD Resolution | 24-bit (0.06 ppm) |
| Corrosion Resolution | 0.01% of Sensing Element Thickness |
| RTC Accuracy | <1 min/month |
| Measurement Interval | 1–24 hours |
| Data Storage | 8 MB (up to 100,000 records) |
| Communication | RS485, Modbus RTU compliant |
| Power Supply | DC 12 V |
| Dimensions | Ø114 × 120 mm |
| Weight | 1.3 kg |
| Operating Temperature | −30 °C to +60 °C |
| Relative Humidity | ≤80% RH |
| Enclosure Material | Anodized Aluminum |
| Ingress Protection | IP67 |
| Explosion Protection | Ex ib II C T4 Gb (conforms to GB3836.1–2011 & GB3836.4–2011) |
| Software | CST Corrosion Analysis Suite (Windows XP or later) |
| Brand | CorrTest |
|---|---|
| Origin | Hubei, China |
| Model | CST480AS |
| Probe Material | Copper Thin-Film Resistive Grid |
| Corrosion Thickness Resolution | 1 nm |
| Cu Film Thickness | 10 µm |
| Sensor Lifetime | >5 years (ISA–71.04–1985 G2 compliant) |
| Temperature Range | −30 °C to +60 °C (±1 °C) |
| Humidity Range | 0–100% RH (±3% RH) |
| Barometric Pressure Range | 300–1100 hPa (±1 hPa) |
| Data Storage | 8 MB (≈100,000 records) |
| RTC Drift | <1 min/month |
| Measurement Interval | 1–24 hours |
| Communication | RS485, Modbus RTU |
| Power Supply | DC 12 V |
| Dimensions | 120 × 80 × 65 mm |
| Weight | 420 g |
| Operating Environment | −30 °C to +60 °C, ≤95% RH (non-condensing) |
| Enclosure Material | Engineering-grade weather-resistant polymer |
| Ingress Protection | IP65 |
| Software Features | Real-time corrosion rate & remaining thickness calculation, corrosion trend modeling, time-series graphing, Excel-compatible report export, ISO/IEC 17025-aligned data traceability framework |
| Brand | CorrTest |
|---|---|
| Origin | Hubei, China |
| Model | CST516 |
| Channels | 8 |
| Galvanic Current Range | ±0.01 nA to ±10 mA |
| Current Resolution | 10 pA (at 10 nA range) |
| Potential Range | −1.20 V to +1.20 V |
| Potential Accuracy | ±1 mV |
| Temperature Range | −30 °C to +60 °C (±1 °C) |
| Relative Humidity Range | 0–100% RH (±3% RH) |
| Barometric Pressure Range | 500–1200 hPa (±0.5 hPa) |
| Sampling Interval | 1–99 s |
| Data Storage | 2 MB (≈20,000 records) |
| Communication | RS485, Modbus RTU |
| Power Supply | DC 12 V |
| Dimensions | 180 × 130 × 60 mm |
| Weight | 600 g |
| Enclosure Rating | IP65 |
| Electrode Configurations | Cu–Fe, Zn–Fe, Al–Fe symmetric comb-type electrodes (0.5 mm pitch) |
| Onboard Filtering | 2nd-order low-pass analog filter |
| Microcontroller | STM32-based embedded system |
| Input Architecture | 8-channel ultra-high-impedance voltage followers + 8-channel precision zero-resistance ammeters |
| Brand | CorrTest |
|---|---|
| Origin | Hubei, China |
| Model | CST720 |
| Power Supply | DC 12 V |
| Communication | RS485 (Modbus RTU) |
| Data Storage | 2 MB (up to 20,000 records) |
| Operating Temperature | −30 °C to +60 °C |
| Operating Humidity | ≤95% RH (non-condensing) |
| Enclosure Rating | IP65 |
| Instrument Dimensions | 180 × 130 × 60 mm |
| Probe Dimensions | Φ54 × 116 mm |
| Weight | 1.5 kg |
| Input Impedance | 1 × 10¹¹ Ω |
| Corrosion Rate Range | 0–10 mm/a |
| Half-Cell Potential Range | −2.5 V to +2.5 V |
| Potential Accuracy | ±0.5% FS |
| Potential Resolution | 0.1 mV |
| pH Range | 4.00–14.00 |
| pH Accuracy | ±10% FS |
| pH Resolution | 0.01 |
| Cl⁻ Range | 1 × 10⁻⁴ – 0.1 mol/L |
| Cl⁻ Accuracy | ±10% FS |
| Cl⁻ Resolution | 1 × 10⁻⁵ mol/L |
| Resistivity Range | 10 Ω·cm – 100 kΩ·cm |
| Resistivity Accuracy | ±0.5% FS |
| Resistivity Resolution | 0.1 Ω·cm |
| Real-Time Clock Drift | <1 min/month |
| Integrated Sensors | MnO₂ reference electrode, Ag/AgCl chloride ISE, conductivity electrode, corrosion working electrode, Pt auxiliary electrode, NTC temperature sensor |
| Brand | CorrTest |
|---|---|
| Origin | Hubei, China |
| Model | CST730 |
| Measurement Channels | 6-potential / 6-current / 6-impedance |
| Input Impedance | 1×10⁸ Ω |
| Potential Range | −2.0 V to +2.0 V |
| Potential Accuracy | ±0.5% of full scale |
| Potential Resolution | 0.1 mV |
| Current Range | −10 mA to +10 mA (5 auto-ranging scales: 2 µA, 20 µA, 200 µA, 2 mA, 20 mA) |
| Current Accuracy | ±0.5% FS (>20 µA), ±1% FS (≤20 µA) |
| Current Resolution | 0.01 µA |
| Impedance Range | 100 Ω to 10 MΩ |
| Impedance Accuracy | ±0.5% FS (<1 MΩ), ±2% FS (≥1 MΩ) |
| Impedance Resolution | 0.1 Ω |
| Temperature Range | −30 °C to +85 °C (±1 °C) |
| Logging Interval | 1–255 hours |
| Data Storage | 2 MB (~10,000 records) |
| Communication | RS485, Modbus RTU protocol |
| Power Supply | DC 12 V |
| Dimensions | 180 mm × 130 mm × 60 mm |
| Weight | 2.0 kg |
| Operating Temperature | −30 °C to +60 °C |
| Operating Humidity | ≤95% RH (non-condensing) |
| Enclosure Material | Weather-resistant engineering plastic |
| Ingress Protection | IP67 |
| Brand | CorrTest |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CST800E |
| Pricing | Upon Request |
| Measurement Principle | Electrochemical Impedance Spectroscopy (EIS) |
| Channels | 4 independent corrosion monitoring channels |
| Corrosion Rate Range | 0.1 μm/a to 10 mm/a |
| Absolute Accuracy | ±1% of reading |
| Input Impedance | 1 × 10¹¹ Ω |
| Corrosion Potential Range | −2.5 V to +2.5 V |
| Potential Resolution | 0.1 mV |
| Solution Resistance (Rs) Range | 10 Ω to 500 kΩ |
| Polarization Resistance (Rp) Range | 5 Ω to 10 MΩ |
| AC Excitation Signal | Sine wave, amplitude 1–100 mV, frequency 0.001 Hz–10 kHz |
| Timing Interval | 1–255 hours |
| Real-Time Clock Drift | <1 min/month |
| Onboard Memory | 16 MB non-volatile flash (20,000 data sets) |
| Communication Interfaces | USB 2.0, RS-485 |
| Power Supply | AC 220 V ±10% / 4 × AA rechargeable batteries (60 h continuous operation) |
| Dimensions | 280 mm × 250 mm × 110 mm |
| Weight | 3.5 kg |
| Operating Temperature | −30 °C to +60 °C |
| Relative Humidity | ≤80% RH (non-condensing) |
| Enclosure Material | Industrial-grade ABS polymer |
| Ingress Protection | IP65 |
| Included Accessories | CP-81 corrosion probe, electrode polishing kit, simulated electrolytic cell, power/USB/electrode/probe cables, EISTools software suite |
| Brand | CorrTest |
|---|---|
| Origin | Hubei, China |
| Model | CST810E |
| Measurement Principle | Linear Polarization Resistance (LPR) + Electrochemical Impedance Spectroscopy (EIS) |
| Channels | 1 |
| Corrosion Rate Range | 0.1 μm/a – 10 mm/a |
| Accuracy | ±1% FS |
| Input Impedance | 1×10¹¹ Ω |
| Corrosion Potential Range | −2.5 V to +2.5 V |
| Potential Resolution | 0.1 mV |
| Solution Resistance (Rs) Range | 10 Ω – 500 kΩ |
| Polarization Resistance (Rp) Range | 10 Ω – 10 MΩ |
| AC Signal Amplitude | 1–100 mV RMS |
| Frequency Range | 0.001 Hz – 10 kHz |
| Timing Interval | 1–255 hours |
| Real-Time Clock Drift | <1 min/month |
| Data Storage | 10,000 records (timestamped) in 8 MB Flash memory |
| Power | Rechargeable Li-ion battery (60 h continuous operation) |
| Dimensions | 260 × 165 × 200 mm |
| Weight | 3.5 kg |
| Operating Temperature | −30 °C to +60 °C |
| Humidity | ≤100% RH (non-condensing) |
| Enclosure Material | Industrial-grade polymer |
| IP Rating | IP65 |
| Communication | USB 2.0, RS-232 serial interface |
| Software | EIS Tools v3.x (Windows-based, supports ASTM G102, ISO 9223, NACE SP0169, and GLP-compliant data audit trails) |
| Brand | Ivium |
|---|---|
| Origin | Netherlands |
| Model | Octo Stat |
| Max Current per Channel | ±200 mA / ±5 A (selectable) |
| Max Voltage | ±10 V |
| Current Range | ±10 nA to ±100 mA (standard), extendable to ±10 A |
| EIS Frequency Range | 10 µHz – 100 kHz |
| Onboard Data Storage | 20 million data points per channel |
| Interface | USB 2.0 & 10/100 Mbps Ethernet |
| Rack Mount | 19-inch standard |
| Standalone Operation | Yes (fully embedded control firmware) |
| Software | IviumSoft (battery cycling, EIS, polarization, corrosion analysis modules) |
| Brand | Nisene |
|---|---|
| Origin | USA |
| Model | JetEtch Pro |
| Certifications | CE, SEMI S2-93, SEMI S2-2000 |
| Power | 350 W @ 95–130 VAC or 210–250 VAC |
| Dimensions (H×W×D) | 290 × 290 × 419 mm (11.5″ × 11.5″ × 16.5″) |
| Weight | 17 kg (38 lb) |
| Compressed Air | 4.2 kg/cm² (60–100 psi) |
| Nitrogen Supply | 2.8 L/min (0.1 ft³/min) |
| Etchant Flow Rates | Pulse mode: 1, 2, 5, or 1–10 mL/min |
| Vortex mode | 1–6 mL/min |
| Temperature Range | HNO₃: 20–90 °C |
| H₂SO₄ | 20–250 °C |
| Mixed acids | 20–100 °C |
| Etch Time | 1–1800 s (1 s increments) |
| Heating Ramp Time | 0–120 s (1 s increments) |
| Acid Reservoirs | Four 500 mL or 1 L bottles (33/38/40/45 mm cap diameter) |
| Programmable Methods | 100 user-defined protocols |
| Etchant Options | Fuming nitric acid, fuming sulfuric acid, concentrated sulfuric acid, nitric–sulfuric mixtures (ratios: 6:1, 5:1, 4:1, 3:1 in either direction) |
| Rinse Options | Cold H₂SO₄, cold HNO₃, or no rinse |
| Etch Modes | Vortex spray, pulsed spray, and dual-mode sequencing |
| Patented Processes | CuProtect™ (US Patent 8,945,343 B2), TotalProtect™ (US Patent 9,543,173 B2), PlasmaEtch™ (US Patent 9,548,227 B2) |
| Brand | OFITE |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | 120-700 |
| Price | Upon Request |
| Max Pressure | 34.5 MPa |
| Max Temperature | 204.4 °C |
| Temp Accuracy | ±0.5 °C |
| Sample Capacity | 4 × 150 mL vessels |
| Agitation Speed Range | 0–100 rpm |
| Controller | Digital Microprocessor-Based Temperature Controller |
| Cooling | Integrated Water-Circulation Rapid Cool-Down System |
| Safety Features | High-Pressure Relief Valve, Audible/Visual Alarm System |
| Dimensions (L×W×H) | 64 × 41 × 66 cm |
| Shipping Dimensions | 76 × 51 × 76 cm |
| Net Weight | 97.6 kg |
| Gross Weight | 115.8 kg |
| Utility Requirements | Cooling Water (40 PSI), Compressed Air or Nitrogen (100–120 PSI), Drain Connection, Electrical Supply: 230 V, 50/60 Hz, 25 A |
| Brand | Red Sun Instrument |
|---|---|
| Model | HR-280 |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Temperature Control Range | Ambient to 300.0 °C (independently adjustable per bath) |
| Temperature Accuracy | ±0.1 °C (per bath) |
| Temperature Sensor | Imported Pt100 Platinum Resistance Thermometer |
| Heating Power | 1.5 kW (rated) |
| Bath Configuration | 4 independent metal heating baths |
| Stirring Speed | 1400 rpm |
| Timing Range | 0.01 s to 99 h 59 min |
| Display | 7-inch capacitive touch LCD with Chinese menu interface |
| Data Storage | Onboard non-volatile memory |
| Compliance | GB/T 7326–2016 (Petroleum Products — Determination of Copper Strip Corrosion) |
| Brand | Starwood |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SDW-4334 |
| Price Range | USD 2,800 – 7,000 |
| Heating Capacity | 4 independent stations (500 W each) |
| Max Operating Temperature | 400 °C |
| Compliance | GB/T 4334–2020 (including optional Method A) |
| Control System | PLC + PID temperature regulation |
| Cooling | Integrated reflux condensation system with auto-recirculation |
| Safety Features | Low-coolant alarm, auto-shutdown, power-interruption resume function |
| Power Supply | 2000 W total |
| Optional Modules | ICT-W closed-loop chiller, ICT-M Wi-Fi remote monitoring, ICT-S SMS-based remote control, ICT-A sensitization test kit, acid fume extraction cabinet |
| Brand | Zhonghuan Furnace |
|---|---|
| Origin | Tianjin, China |
| Model | HTSWT-02G |
| Max Operating Temperature | 1600 °C |
| Reaction Chamber Diameter | Φ50 mm / Φ70 mm (optional) |
| Effective Chamber Length | 100 mm |
| Sample Dimensions | 30 × 20 × 4 mm |
| Sample Mounting Angle | 30°–45° (adjustable) |
| Heating Element | Silicon Molybdenum Rod |
| Heater Tube Material | Alumina |
| Steam Generation Range | 5–100% RH (or arbitrary humidified gas mixture) |
| Evaporator Temp Limit | ≤150 °C |
| Trace Gas Line Heat Tracing | ≤120 °C |
| Max Steam Flow Rate | 30 L/min |
| Max Steam Velocity | 160 m/s |
| Carrier Gas Control | Mass Flow Controller (up to 5 L/min) |
| Pressure | Ambient (atmospheric) |
| Voltage | 220 V AC |
| Power Rating | 5.5 kW |
| Control Interface | 10.4″ Integrated Touchscreen with PLC-Based Multi-Module Architecture |
| Temperature Program | 50-Step Ramp/Soak Profile |
| Temperature Stability | ±1 °C |
| Data Logging | Real-Time Trend Curves & Exportable Reports (CSV/PDF) |
| Brand | Zhonghuan Furnace |
|---|---|
| Origin | Tianjin, China |
| Model | HTWOS-01G |
| Max Operating Temperature | 1600 °C |
| Reaction Chamber Diameter | Φ50 mm / Φ70 mm (optional) |
| Effective Chamber Length | 100 mm |
| Sample Dimensions | 30 × 20 × 4 mm |
| Sample Mounting Angle | 30°–45° (adjustable) |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Heating Zone Material | Alumina (Al₂O₃) Tube |
| Steam Generation Range | 5–100% RH (or arbitrary humid gas mixture) |
| Evaporator Temp Limit | ≤150 °C |
| Trace Gas Line Heat Tracing | ≤120 °C |
| Max Steam Flow Rate | 30 L/min |
| Max Steam Velocity | 160 m/s |
| Carrier Gas Control | Mass Flow Controller (MFC), 5 L/min full scale |
| Operating Pressure | Ambient (1 atm) |
| Control Interface | 10.4″ Industrial Touchscreen HMI with PLC-based Multi-Module Architecture |
| Temperature Control Accuracy | ±1 °C |
| Programmable Ramp/Soak Profiles | 50-segment |
| Data Logging | Real-time Trend Curves & Exportable CSV Reports |