Crushing Equipment
Filter
Showing 151–180 of 391 results
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | DFY-200C |
| Capacity | 200 g |
| Power | 1000 W |
| Motor Speed | 25,000 rpm |
| Grinding Bowl Dimensions | 135 × 100 mm |
| Overall Dimensions | 20 × 22 × 28 cm |
| Construction | Stainless Steel Grinding Chamber, Anodized Aluminum Housing |
| Sealing | Food-Grade Silicone Gasket |
| Bearing Type | Imported Precision Ball Bearings |
| Motor | Imported High-Efficiency Brushless Motor |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | DFY-500A |
| Instrument Type | Oscillating Crusher |
| Sample Compatibility | Hard and brittle materials |
| Batch Capacity | 500 g |
| Output Particle Size | 20–200 mesh (approx. 0.074–0.84 mm) |
| Minimum Output Granularity | ≥0.5 mm |
| Construction | Stainless steel grinding chamber and blades |
| Motor | High-efficiency imported motor |
| Power | 1300 W |
| Rated Speed | 25,000 rpm |
| Grinding Bowl Dimensions | Ø187 × 125 mm |
| Overall Dimensions | 20 × 22 × 34 cm |
| Compliance | Designed for GLP-aligned laboratory environments |
| Brand | Hanuo |
|---|---|
| Origin | Shanghai, China |
| Model | DFY-600C |
| Instrument Type | Laboratory Crusher |
| Sample Applicability | Hard, Dry Solid Materials |
| Batch Capacity | 600 g |
| Output Particle Size | 20–200 mesh (approx. 0.5–0.85 mm) |
| Motor Power | 1500 W |
| Rated Speed | 25,000 rpm |
| Crushing Chamber Material | Stainless Steel (AISI 304) |
| Sealing System | Food-Grade Silicone Gasket |
| Dimensions (L×W×H) | 21 × 21 × 39 cm |
| Net Weight | ~18 kg |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | HMM-400 |
| Instrument Type | Planetary Ball Mill |
| Sample Suitability | Hard, Brittle, Fibrous, Elastic & Composite Materials |
| Final Particle Size | ≤5 µm |
| Maximum Feed Size | 6 mm |
| Batch Capacity | 10 mL |
| Grinding Frequency Range | 3–20 Hz |
| Grinding Time Range | 1–99 min |
| Motor Power | 180 W |
| Dimensions (W×D×H) | 421 × 350 × 218 mm |
| Net Weight | 25 kg |
| Grinding Jar Volume | Up to 25 mL |
| Jar Material Options | Stainless Steel, Tungsten Carbide, Zirconia, Agate |
| Programmable Presets | 9 user-defined protocols |
| Sealed Vial Design | Yes |
| Reproducibility | High inter-batch consistency under identical parameter sets |
| Brand | Tianjin HengAo |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Planetary Ball Mill |
| Sample Type | Hard, Brittle, Fibrous, Elastic, and Composite Materials |
| Feed Size | ≤ 6 mm |
| Final Particle Size | ≤ 5 µm |
| Batch Capacity | 50 mL |
| Grinding Mechanism | High-Energy Planetary Motion with Dual Grinding Stations |
| Programmable Presets | 6 User-Defined Protocols |
| Sealed Grinding Vessels | Yes (Leak-Proof Spiral Cap Design) |
| Display | LED Interface with Real-Time Parameter Monitoring (Speed, Time, Pulse Mode) |
| Brand | BIO-DL |
|---|---|
| Origin | Shanghai, China |
| Model | HF-Extract High-Throughput Ball Mill Grinder |
| Drive Mechanism | Horizontal Arcuate Radial Oscillation |
| Maximum Sample Throughput | Dual Platform (2 independent grinding stations) |
| Final Particle Size | < 5 µm |
| Control Interface | 5-inch LED Touchscreen with Program Storage |
| Grinding Modes | Dry, Wet, Cryogenic |
| Safety Features | Interlocked Lid, Motor Cut-off Switch, EasyClamp™ Vessel Securing System, Transparent Viewing Window |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | HsiangTai (HSIANGTAI) |
|---|---|
| Origin | Shanghai, China |
| Model | SM-3/L |
| Motor Power | 700 W |
| Speed Range | 0–30,000 rpm |
| Grinding Capacity | 200 mL |
| Feed Size | ≤10 mm (standard) |
| Final Particle Size | 0.01–0.5 mm |
| Cup Material | High-Strength Polycarbonate |
| Dimensions (Ø × H) | 170 × 335 mm |
| Net Weight | 5.6 kg |
| Input Voltage | AC 220 V, 50/60 Hz |
| Safety Features | Overload & Overheat Protection, Automatic Motor Cut-off Upon Cup Detachment |
| Optional Accessory | Micro-Cap Lid for Sub-10 µm Pulverization |
| Brand | HsiangTai |
|---|---|
| Origin | Taiwan |
| Model | SM-3C |
| Instrument Type | Cryogenic Knife Mill |
| Sample Applicability | Hard, Heat-Sensitive, High-Fat/High-Moisture Materials |
| Feed Size | ≤10 mm |
| Final Particle Size | 0.01–0.5 mm (typical) |
| Batch Capacity | 150 mL |
| Speed Range | 0–30,000 rpm |
| Motor Power | 700 W |
| Voltage/Frequency | AC 220 V, 50/60 Hz |
| Dimensions | Φ182 × 330 mm |
| Weight | 6 kg |
| Cooling Method | External Circulating Cryogenic Fluid (e.g., Ethylene Glycol/Water or Liquid Nitrogen-Compatible Jacket) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HM-24S |
| Sample Capacity | 24 × 2 mL tubes (standard) |
| Grinding Frequency | 0–70 Hz |
| Grinding Time | 0 s–99 min adjustable |
| Noise Level | <55 dB(A) |
| Sample Temperature Control | Compatible with liquid nitrogen pre-cooling |
| Grinding Method | Vertical reciprocating bead-based homogenization (dry, wet, cryogenic) |
| Display | Touchscreen interface |
| Dimensions (L×W×H) | 260 × 380 × 500 mm |
| Weight | 25 kg |
| Max Acceleration | Achieved within 2 s |
| Bead Diameter Range | 0.1–30 mm |
| Bead Material Options | Stainless steel, chrome steel, zirconia, tungsten carbide, quartz sand |
| Chamber Safety Lock | Integrated metal housing with interlocked lid |
| Platform Configuration | Dual grinding platforms (>2 active stations) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HM-48LS |
| Price | ¥49,400 CNY |
| Throughput | 48 × 2 mL samples in ≤15 s |
| Sample Chamber Temperature Range | 0°C to –50°C |
| Grinding Frequency | 0–70 Hz |
| Noise Level | <55 dB(A) |
| Max Acceleration Time | ≤2 s |
| Grinding Method | Vertical reciprocating bead-beating |
| Display | Touchscreen interface |
| Standard Adapter | 48-position 2 mL PE rack |
| Optional Adapters | 12 × 5 mL, 4 × 10/15/25 mL, 2 × 50 mL |
| Grinding Media Diameter | 0.1–30 mm |
| Compatible Bead Materials | Stainless steel, chromium steel, zirconia, tungsten carbide, quartz sand |
| Final Particle Size | ~5 µm |
| Enclosure Safety Lock | Yes |
| Weight | 50 kg |
| Dimensions (L×W×H) | 700 × 400 × 500 mm |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HM-LD96S |
| Price | USD 7,400 (approx.) |
| Throughput | 96 × 2 mL samples in ≤15 s |
| Max Frequency | 70 Hz |
| Vertical Stroke | 34 mm |
| Cooling Range | −50 °C to +20 °C |
| Noise Level | <55 dB(A) |
| Display | 5-inch LED touchscreen |
| Sample Tube Compatibility | 2 mL (48-well PE adapter standard), optional 5/10/25/50 mL adapters |
| Grinding Media Diameter | 0.1–30 mm |
| Media Materials | Stainless steel, chromium steel, zirconia, tungsten carbide, quartz |
| Grinding Mode | Vertical bead-based oscillation (dry, wet, cryogenic) |
| Refrigeration Ramp | ~40 min from 20 °C to −50 °C |
| Dimensions (L×W×H) | 450 × 450 × 720 mm |
| Weight | 55 kg |
| Data Storage | ≥20 user-defined protocols with tissue-specific presets (e.g., heart, spleen, lung, kidney, bone, hair) |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | HM2-6 |
| Pricing | Available Upon Request |
| Speed Range | 2450–4450 rpm |
| Sample Capacity | 6 × 2 mL tubes |
| Feed Size | Determined by adapter specifications |
| Final Particle Size | ~5 µm |
| Grinding Media Diameter | 0.1–5 mm |
| Acceleration Time | ≤2 s |
| Deceleration Time | ≤2 s |
| Grinding Modes | Wet & Dry |
| Adapter Material | POM or Nylon |
| Safety Features | Lid-Interlocked Emergency Stop |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Dimensions (W×D×H) | 351 × 215 × 202 mm |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer | Yes |
| Country of Origin | China |
| Model | HMD-400 |
| Instrument Type | Vibratory Ball Mill |
| Sample Suitability | Hard, brittle, medium-hard, fibrous, hydrated, elastic, and soft materials |
| Feed Size | ≤ 40 mm |
| Final Particle Size | 5–10 µm (typical) |
| Batch Capacity | < 2 × 50 mL |
| Vibration Speed | 180–2100 rpm |
| Frequency Range | 3–35 Hz |
| Grinding Time Range | 0–8 h 00 min 00 s |
| Power Consumption | 250 W |
| Dimensions (W×H×D) | 400 × 312 × 490 mm |
| Net Weight | ~28 kg |
| Grinding Modes | Dry, Wet, Cryogenic, High-Throughput |
| Jar Quantity | 2 |
| Jar Type | Screw-Cap Vial (Stainless Steel, Tungsten Carbide, Zirconia, PTFE options available) |
| Display | Touchscreen Interface with Program Memory |
| Reproducibility | High inter-batch consistency under controlled parameters |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | HMR-1 |
| Instrument Type | Handheld Tissue Grinder |
| Sample Compatibility | Soft biological tissues |
| Maximum Feed Size | <30 mm |
| Final Particle Size | ≤5 µm |
| Batch Processing Volume | ≤1.5 mL |
| Speed Settings | 3-step adjustable (5,000 / 10,000 / 18,000 rpm) |
| Power Supply | Rechargeable Li-ion battery (4.2 V, 300 mAh) |
| Rated Power | 10 W |
| Chuck Diameter | 3 mm |
| Chuck Depth | 25 mm |
| Device Dimensions | 125 × 16 mm |
| Net Weight | 0.086 kg |
| Charging Time | 60 min (full), 30 min (80%) |
| Battery Life | >60 min per charge |
| Brand | HUXI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | HTR-20D |
| Instrument Type | Three-Roll Mill |
| Sample Applicability | Soft and Highly Viscous Materials |
| Final Particle Size | < 0.01 mm |
| Roller Material | Zirconia Ceramic |
| Roller Diameter | 80 mm |
| Roller Length | 200 mm |
| Speed Ratio | 1:3:9 |
| Metering Roller Speed | 0–500 rpm |
| Throughput | 0.02–20 L/h |
| Gap Adjustment Range | 0–180 µm |
| Gap Resolution | 1 µm |
| Roller Concentricity & Straightness | ≤ 2 µm |
| Surface Roughness (Ra) | ≤ 0.3 µm |
| Maximum Line Pressure | ≥ 200 N/cm |
| Power Supply | 220 V AC |
| Total Power Consumption | 2000 W |
| Dimensions (L×W×H) | 750 × 512 × 559 mm |
| Net Weight | 95 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Batch Grinder |
| Model | A 10 basic |
| Sample Type | Hard, brittle, soft, and fibrous materials |
| Feed Particle Size | ≤ 6 mm |
| Output Particle Size | 125–250 µm |
| Maximum Batch Volume | 50 mL |
| Grinding Mechanism | Shear and impact |
| Motor Input Power | 300 W |
| Motor Output Power | 240 W |
| Max. Speed | 25,000 rpm ±500 rpm |
| Peripheral Speed | 73 m/s |
| Max. Feed Hardness | 5 Mohs |
| Grinding Chamber Material | Stainless steel 1.4301 |
| Cutting/Impact Tool Material | Stainless steel 1.4034 |
| Cooling Options | Water-cooled chamber, dry ice cooling, liquid nitrogen cooling |
| Duty Cycle | 5 min ON / 10 min OFF |
| Dimensions (W × H × D) | 130 × 250 × 145 mm |
| Weight | 2.9 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Protection Rating | IP 41 |
| Electrical Supply | 220–240 V, 50/60 Hz |
| Interface | None |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | A 10 basic |
| Grinding Type | Batch |
| Motor Input Power | 300 W |
| Motor Output Power | 240 W |
| Max Speed | 25,000 rpm |
| Speed Tolerance | ±500 rpm |
| Max Peripheral Speed | 73 m/s |
| Max Feed Hardness | 5 Mohs |
| Max Feed Size | 6 mm |
| Final Particle Size | 125–250 µm |
| Minimum Output Size | >0.5 mm |
| Batch Capacity | 50 mL |
| Grinding Chamber Material | Stainless Steel 1.4301 |
| Cutting/Impact Blade Material | Stainless Steel 1.4034 |
| Cooling Options | Water, Dry Ice, Liquid Nitrogen |
| Duty Cycle | 5 min ON / 10 min OFF |
| Dimensions (W×H×D) | 130 × 250 × 145 mm |
| Weight | 2.9 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP 41 (DIN EN 60529) |
| Voltage | 220–240 V AC |
| Frequency | 50/60 Hz |
| Safety Interlock | Yes |
| Timer Display | Digital |
| Drive Type | Brushless Electronic Motor |
| Lid Locking Mechanism | Snap-fit Quick-Release |
| Blade Exchange | Tool-free |
| Compliance | CE, RoHS, IEC 61000-6-3, IEC 61000-6-4 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | A 11 basic Analytical Mill |
| Motor Input Power | 160 W |
| Motor Output Power | 100 W |
| Max. Speed | 28,000 rpm |
| Max. Peripheral Speed | 53 m/s |
| Max. Feed Particle Size | 10 mm |
| Max. Feed Hardness | 6 Mohs |
| Max. Sample Volume | 80 mL |
| Grinding Chamber Material | Stainless Steel 1.4571 |
| Impact/Shear Rotor Material | Stainless Steel 1.4034 |
| Cooling Options | Dry Ice or Liquid Nitrogen in Chamber |
| Duty Cycle | 1 min ON / 10 min OFF |
| Dimensions (W × H × D) | 85 × 240 × 85 mm |
| Weight | 1.5 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Ingress Protection | IP 43 |
| Voltage | 220–230 V, 50/60 Hz |
| Optional Accessories | A 11.4 250 mL Grinding Cup, A 11.5 80 mL PTFE-Reinforced Grinding Cup |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | A 11 basic Analytical Mill |
| Instrument Type | Analytical Grinder |
| Sample Applicability | Hard and brittle materials (up to 6 Mohs hardness) |
| Feed Particle Size | ≤ 10 mm |
| Output Particle Size | 1–100 µm |
| Final Fineness | < 0.01 mm |
| Batch Volume | 80 mL (standard), optional 250 mL |
| Grinding Mechanism | Impact and shear |
| Motor Input Power | 160 W |
| Motor Output Power | 100 W |
| Max. Speed | 28,000 rpm |
| Max. Peripheral Speed | 53 m/s |
| Grinding Chamber Material | Stainless steel 1.4571 (AISI 316L) and Tefcel® (ETFE reinforced with glass fiber) |
| Cooling Options | Dry ice or liquid nitrogen compatible |
| Duty Cycle | 1 min ON / 10 min OFF |
| Dimensions (W × H × D) | 85 × 240 × 85 mm |
| Weight | 1.5 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤ 80 % |
| Protection Class | IP 43 |
| Voltage | 220–240 V / 100–115 V |
| Frequency | 50/60 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | A10 basic |
| Instrument Type | Batch Grinder |
| Sample Applicability | Hard, brittle, soft, and fibrous materials |
| Final Particle Size | < 0.01 mm |
| Maximum Feed Hardness | 5 Mohs |
| Maximum Feed Particle Size | 6 mm |
| Grinding Chamber Capacity | 50 mL |
| Motor Input Power | 300 W |
| Motor Output Power | 240 W |
| Max. Speed | 25,000 rpm |
| Speed Tolerance | ±500 rpm |
| Max. Peripheral Speed | 73 m/s |
| Duty Cycle | 5 min ON / 10 min OFF |
| Cooling | Water-cooling compatible |
| Grinding Head Material | Stainless Steel 1.4034 |
| Grinding Chamber Material | Stainless Steel 1.4301 |
| Dimensions (W × H × D) | 130 × 250 × 145 mm |
| Weight | 3.13 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80% RH |
| Ingress Protection | IP 41 (DIN EN 60529) |
| Voltage | 220–240 V |
| Frequency | 50/60 Hz |
| Drive Type | Brushless Electronic Motor |
| Control Interface | Membrane Keypad with Digital Timer |
| Safety Features | Interlocked Lid Switch, Automatic Brake, Error Code Display |
| Optional Accessories | A10.1 Impact Rotor, Reduced-Volume Rotor |
| Compliance | CE, RoHS, IEC 61000-6-3, IEC 61000-6-2 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | A10 Basic |
| Instrument Type | Batch Grinder |
| Sample Type | Soft, brittle, fibrous, and elastic materials |
| Maximum Feed Size | < 6 mm |
| Final Particle Size | < 40 µm (typical), down to ≤10 µm under optimized conditions |
| Batch Capacity | Up to 50 mL |
| Grinding Mechanism | High-speed shear and impact |
| Motor Output Power | 240 W |
| Input Power | 300 W |
| Max. Speed | 25,000 rpm (±500 rpm) |
| Peripheral Speed | 73 m/s |
| Grinding Chamber Material | Stainless Steel 1.4301 |
| Cutting Tool Material | Stainless Steel 1.4034 |
| Cooling Options | Integrated water-cooling jacket + optional dry-ice cooling |
| Duty Cycle | 5 min ON / 10 min OFF |
| Dimensions (W × H × D) | 130 × 250 × 145 mm |
| Weight | 3.13 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Protection Class | IP41 (DIN EN 60529) |
| Electrical Supply | 220–240 V, 50/60 Hz |
| Compliance | CE, RoHS, IEC 61000-6-3/-4 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | A11 |
| Instrument Type | Batch Impact & Shear Grinder |
| Sample Compatibility | Cryogenic (Liquid Nitrogen-Compatible) Samples |
| Output Particle Size Range | 0.01–0.5 mm |
| Standard Grinding Chamber | A11.5 (80 mL, PTFE-reinforced with glass fiber + 1.4571 stainless steel) |
| Optional Grinding Chamber | A11.4 (250 mL) |
| Grinding Mechanisms | Impact (integrated hardened stainless steel impact head, Mohs hardness ≈ 6) and Shear (optional shear rotor kit, sold separately) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | A11 |
| Instrument Type | Batch Grinder |
| Sample Compatibility | Cryogenic & Ambient-Temperature Samples |
| Feed Size | ≤ 10 mm |
| Final Particle Size | 0.01–0.5 mm (typical), down to < 40 µm with optimized cryo protocols |
| Batch Capacity | 80 mL |
| Motor Input Power | 160 W |
| Motor Output Power | 100 W |
| Speed | 28,000 rpm |
| Peripheral Speed | 53 m/s |
| Grinding Chamber Material | PTFE-glass fiber composite (A11.5) + 1.4571 stainless steel |
| 刀头 Material | Stainless steel (A11.1), CrC-coated (A11.3), or shear-specific (A11.2) |
| Cooling Options | Dry ice or liquid nitrogen compatible |
| Duty Cycle | 1 min ON / 10 min OFF |
| Dimensions | 85 × 240 × 85 mm |
| Weight | 1.5 kg |
| IP Rating | IP43 |
| Operating Temp. | 5–40 °C |
| Humidity | ≤ 80 % RH |
| Voltage | 220–240 V / 100–115 V, 50/60 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | M 20 Universal Mill |
| Instrument Type | Grinder |
| Sample Applicability | Hard, brittle materials |
| Feed Particle Size | < 7 mm |
| Output Particle Size | 1–80 µm |
| Batch Grinding Capacity | 250 mL |
| Grinding Media | Stainless steel cutting head (1.4034) and grinding chamber (1.4301) |
| Motor Input Power | 450 W |
| Motor Output Power | 225 W |
| Max. Speed | 20,000 rpm |
| Max. Peripheral Speed | 72 m/s |
| Max. Feed Hardness | 5 Mohs |
| Operating Cycle | 7 min ON / 10 min OFF |
| Cooling | Water-jacketed chamber (external coolant connection) or dry ice cooling |
| Dimensions (W × H × D) | 170 × 350 × 170 mm |
| Weight | 6.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤ 80 % |
| Protection Class | IP 21 (DIN EN 60529) |
| Voltage | 230 / 115 / 100 V |
| Frequency | 50/60 Hz |
| Total Input Power | 550 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | M20 |
| Price | Upon Request |
| Grinding Principle | Shear/Impact |
| Motor Input Power | 440 W |
| Motor Output Power | 225 W |
| Max Speed | 20,000 rpm |
| Max Peripheral Speed | 72 m/s |
| Max Working Volume | 250 mL |
| Max Feed Hardness | 5 Mohs |
| Max Feed Particle Size | 7 mm |
| Rotor Material | Stainless Steel 1.4034 |
| Grinding Chamber Material | Stainless Steel 1.4301 |
| Duty Cycle | 7 min ON / 10 min OFF |
| Jacketed Chamber with Water Cooling | Yes |
| Dry Ice Cooling in Chamber | Yes |
| Liquid Nitrogen Cooling in Chamber | No |
| Dimensions (W × H × D) | 170 × 350 × 170 mm |
| Weight | 6.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP21 |
| RS232 Interface | No |
| Analog Output | No |
| Voltage | 230 / 115 V |
| Frequency | 50 / 60 Hz |
| Instrument Input Power | 440 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | General Distributor |
| Origin Category | Imported |
| Model | M 20 Universal Mill |
| Price | Upon Request |
| Motor Input Power | 450 W |
| Motor Output Power | 225 W |
| Max. Speed | 20,000 rpm |
| Max. Peripheral Speed | 72 m/s |
| Max. Working Volume | 250 mL |
| Max. Feed Hardness | 5 Mohs |
| Max. Feed Particle Size | 7 mm |
| Rotor/Cutting Tool Material | Stainless Steel 1.4034 |
| Grinding Chamber Material | Stainless Steel 1.4301 |
| Operating Time (ON) | 7 min |
| Cooling Interval (OFF) | 10 min |
| Jacketed Grinding Chamber (Water-Coolable) | Yes |
| Dry-Ice Cooling Compatible | Yes |
| Dimensions (W × H × D) | 170 × 350 × 170 mm |
| Weight | 6.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Ingress Protection | IP21 (per DIN EN 60529) |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Total Instrument Input Power | 550 W |
| Optional Voltages | 230 V / 115 V / 100 V |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF 10 basic Microfine Grinder Drive |
| Motor Input Power | 1000 W |
| Motor Output Power | 500 W |
| Speed Range | 3000 – 6500 rpm |
| Continuous Operation Time | 120 min (ON) / 30 min (OFF) |
| Cooling | Dry ice compatible in grinding chamber |
| Dimensions (W × D × H) | 320 × 380 × 300 mm |
| Weight | 9.7 kg |
| Ambient Temperature Range | 5 – 40 °C |
| Relative Humidity Limit | ≤80 % |
| Protection Class | IP 22 (DIN EN 60529) |
| Voltage | 230 V, 50/60 Hz |
| Optional Voltages | 115 V or 100–115 V |
| Grinding Principle | Shear and Impact |
| Material Contact Surfaces | Stainless Steel |
| Grind Head & Sieve | Sold Separately |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Benchtop Microfine Grinder |
| Model | MF 10 basic |
| Input Power | 1000 W |
| Output Power | 500 W |
| Speed Range | 3000–6500 rpm |
| Max. Feed Size | <15 mm |
| Final Particle Size | 0.01–0.5 mm (typical output ≤0.25 mm with appropriate sieve) |
| Continuous Operation Time | up to 120 min |
| Cooling | Optional dry ice cooling in grinding chamber |
| Dimensions (W×D×H) | 320 × 380 × 300 mm |
| Weight | 9.7 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class | IP22 (DIN EN 60529) |
| Voltage/Frequency | 230 V / 50 Hz or 115 V / 60 Hz |
| Grinding Principle | High-speed shear and impact |
| Material Contact Parts | Stainless steel (AISI 304) |
| Sieve & Grinding Head | Sold separately |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF 10.1 |
| Maximum Peripheral Speed | 24.5 m/s |
| Maximum Feed Particle Size | 15 mm |
| Grinding Chamber Material | Stainless Steel 1.4308 (AISI 304 equivalent) |
| Cooling Capability | Dry Ice Integration in Grinding Chamber |
| Dimensions (W × D × H) | 320 × 560 × 300 mm |
| Weight | 2.633 kg |
| Sieve Compatibility | Interchangeable stainless steel sieves (optional, not included) |
| Collection Vessel | Standard NS 29 threaded container |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF 10.2 Impact Grinding Head |
| Operating Principle | Impact Milling |
| Maximum Peripheral Speed | 34 m/s |
| Maximum Feed Hardness | 6 Mohs |
| Maximum Feed Particle Size | 10 mm |
| Grinding Chamber Material | Stainless Steel 1.4308 (AISI 304 equivalent) |
| Cooling Option | Dry Ice Insertion in Grinding Chamber |
| Dimensions (W × D × H) | 320 × 450 × 300 mm |
| Weight | 2.942 kg |
| Sieve Compatibility | Interchangeable stainless steel sieves (sold separately) |
| Collection Vessel | Standard NS 29 threaded container |