Environmental Test Chamber
Filter
Showing 1411–1440 of 3663 results
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HH-235 |
| Temperature Range | RT–260 °C |
| Control Accuracy | ±0.5 °C |
| Chamber Dimensions (H×W×D) | 600×650×600 mm |
| External Dimensions (H×W×D) | ≈1230×1100×680 mm |
| Heating Method | Bottom-mounted stainless steel tubular heaters |
| Air Circulation | Horizontal forced-air convection with adjustable intake vent |
| Insulation | Mineral wool between inner and outer chambers |
| Interior Material | SUS430 stainless steel (≥1.2 mm thick) |
| Exterior Material | SECC cold-rolled steel with powder-coated finish (≥1.5 mm thick) |
| Ramp Time | ~15 min (RT to 100 °C) |
| Safety Protections | Motor overload protection, phase sequence protection, over-temperature cut-off |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HH-235 |
| Chamber Interior Dimensions (H×W×D) | 750 × 600 × 500 mm |
| External Dimensions (H×W×D) | ≈1230 × 1100 × 680 mm |
| Power Supply | 220 V, 50 Hz |
| Heating Power | 4.0 kW |
| Operating Temperature Range | Ambient +10 °C to 250 °C |
| Temperature Uniformity | ±1.6% of setpoint |
| Air Circulation | Dual horizontal forced-air duct system |
| Cabinet Material | Cold-rolled steel with light-gray epoxy coating |
| Interior & Duct Material | Stainless steel (SUS304) |
| Heater Type | Stainless steel tubular heating elements |
| Heater Location | Bottom-mounted |
| Insulation | 80 mm thick glass wool |
| Blower Motor | 40 W |
| Temperature Controller | Digital PID controller with LED display, keypad input, auto-hold function |
| Sensor | Pt100 platinum resistance thermometer |
| Timer Range | 0.01–99.99 h with audible alarm and automatic heater cutoff |
| Safety Protections | Short-circuit, overload, motor thermal overload, and phase-loss protection |
| Standard Accessories | 2 stainless steel wire mesh shelves |
| Brand | LabCompanion |
|---|---|
| Model | HH-3 |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (OEM/ODM Producer) |
| Category | Environmental Test Chamber – High-Temperature Aging |
| Power Supply | 220 V, 50 Hz |
| Heating Power | 4.0 kW |
| Operating Temperature Range | Ambient +10 °C to 250 °C |
| Temperature Uniformity | ±1.6% of setpoint |
| Chamber Interior Dimensions (H×W×D) | 750 × 600 × 500 mm |
| External Dimensions (H×W×D) | Approx. 1230 × 1100 × 680 mm |
| Insulation | 80 mm glass wool |
| Heating Element | Stainless steel sheathed tubular heater (bottom-mounted) |
| Air Circulation | Dual-channel horizontal forced convection |
| Temperature Controller | Digital PID with LED display, keypad input, auto-hold function |
| Sensor | Pt100 platinum resistance thermometer |
| Timer Range | 0.01–99.99 h (auto-cut-off + audible alert) |
| Safety Protections | Short-circuit, overload, motor thermal overload, and phase-loss protection |
| Standard Accessories | 2 stainless steel wire mesh shelves |
| Brand | LabCompanion |
|---|---|
| Model | HH-4 |
| Type | Vertical Forced-Air Circulating Oven |
| Temperature Range | R.T.+10°C to 300°C (standard) |
| Interior Dimensions (W×D×H) | 50×60×75 cm / 70×70×80 cm / 80×80×100 cm |
| Exterior Dimensions (W×D×H) | 67×106×96 cm / 87×116×102 cm / 97×126×129 cm |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (R.T.+10°C → 300°C) |
| Air Exchange Rate | 5–200 cycles/hour |
| Power Supply | AC 220 V ±10%, 50 Hz ±0.5 Hz |
| Rated Power | 3.0 kW / 4.0 kW / 6.0 kW |
| Control System | Imported Intelligent PID Controller with Self-Tuning |
| Temperature Sensor | Industrial Platinum RTD (PT100) |
| Display | LED Digital, Simultaneous Setpoint & Actual Temperature |
| Timer Range | 0–999 minutes |
| Insulation | High-Density Polyurethane Foam + Glass Fiber |
| Door Seal | Eco-Friendly Silicone Rubber Gasket |
| Heating Element | Nickel-Chromium Alloy Sheathed Heater |
| Safety Features | Independent Over-Temperature Protection, Thermal Cut-Out, Over-Current Circuit Breaker |
| Standard Compliance | JB/T 5520–1991 Technical Specification for Drying Ovens |
| Accessories (Standard) | Two Adjustable Stainless Steel Shelves (or Rotating Rack), User Manual |
| Optional | Programmable Temperature Controller, RS232/RS485 Communication Port, Chart Recorder, Additional Shelves, Observation Window, Φ50 mm Cable Feedthrough |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HH-5 |
| Power Options | 3.0 kW / 4.0 kW / 6.0 kW |
| Temperature Range | RT+10°C to 300°C or RT+20°C to 450°C |
| Internal Dimensions (W×D×H) | 50×60×75 cm / 70×70×80 cm / 80×80×100 cm |
| External Dimensions (W×D×H) | 67×106×96 cm / 87×116×102 cm / 97×126×129 cm |
| Temperature Uniformity | ±2.5% |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ≤70 min (RT+10°C → 300°C) / ≤80 min (RT+20°C → 450°C) |
| Air Exchange Rate | 5–200 cycles/hour |
| Control System | Imported Intelligent PID Controller with Self-Tuning |
| Temperature Sensor | Industrial Platinum Resistance Thermometer (PT100) |
| Display | LED Digital, Simultaneous Setpoint & Actual Temperature |
| Timer Range | 0–999 minutes |
| Safety Features | Independent Over-Temperature Protection, Thermal Cut-Out, Over-Current Circuit Breaker |
| Construction | Inner Chamber – SUS304 Stainless Steel (BN variant) or High-Quality Cold-Rolled Steel with High-Temp Silver Paint (N variant) |
| Insulation | High-Density Polyurethane Foam + Glass Fiber |
| Door Seal | Eco-Friendly Silicone Rubber Gasket |
| Heating Element | Nickel-Chromium Alloy Wire Heater |
| Mobility | Lockable Casters |
| Standard Compliance | JB/T 5520–1991 “Technical Specifications for Drying Ovens” |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HH-512 |
| Pricing | Upon Request |
| Brand | LabCompanion |
|---|---|
| Model | HH-72 |
| Type | Forced-Convection Benchtop Environmental Test Chamber |
| Temperature Range | RT+10°C to 300°C |
| Temperature Uniformity | ±2.5°C |
| Temperature Fluctuation | ±0.1°C (at 100°C), ±0.3°C (at 200°C) |
| Control Accuracy | ±0.5°C |
| Internal Volume | 72 L |
| Internal Dimensions (W×D×H) | 450 × 400 × 400 mm |
| External Dimensions (W×D×H) | 905 × 610 × 575 mm |
| Heating Power | 1.5 kW |
| Supply Voltage | AC 220 V, 50 Hz |
| Temperature Sensor | Industrial PT100 Platinum Resistance Thermometer |
| Control System | Microprocessor-Based PID Controller with LED Digital Display (Set/Actual Temperature) |
| Timer Range | 0–999 min |
| Operating Mode | Constant-Temperature Mode Only |
| Construction | Interior – SUS430 Stainless Steel (≥1.2 mm) |
| Air Circulation | Forced Convection via Rear-Mounted Horizontal Fan |
| Ventilation Ports | Adjustable Inlet/Exhaust Apertures for Controlled Atmosphere Exchange |
| Safety Features | Over-Temperature Protection, Ground Fault Circuit Interruption, Dual-Stage Thermal Cut-Out |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HH-72 |
| Voltage | 3φ 380 VAC ±10% or 2φ 220 VAC ±10% |
| Temperature Range | RT+5°C to 300°C |
| Temperature Stability | ±1°C |
| Temperature Uniformity | ±1.5°C |
| Internal Dimensions (W×H×D) | 450×400×400 mm |
| External Dimensions | 610×905×575 mm |
| Construction | Exterior – Powder-Coated Steel |
| Insulation | High-Efficiency Compressed Glass Wool |
| Air Circulation | Forced Convection with Optimized Outlet Design |
| Safety Protection | Dual-Stage Over-Temperature Cut-Off (Alarm + Power Disconnection), MCCB Overload Protection, Ceramic Fuse, Non-Fuse Switch, Auto-Tuning PID Control, Finned Tubular Heaters |
| Accessories | Adjustable Stainless Steel Shelves (2–6 pcs), Delayed Fan Shutdown Function (Optional Programmable Controller Available) |
| Brand | LabCompanion |
|---|---|
| Model | HH-72 |
| Type | Forced-Convection Environmental Test Chamber |
| Internal Volume | 72 L |
| Interior Dimensions (W×D×H) | 450 × 400 × 400 mm |
| Exterior Dimensions (W×D×H) | 905 × 610 × 575 mm |
| Temperature Range | RT + 10°C to 300°C |
| Temperature Uniformity | ±2.5°C |
| Temperature Fluctuation | ±0.1°C at 100°C, ±0.3°C at 200°C |
| Heating Rate | ≤40 min (RT to 100°C) |
| Control System | Microprocessor-based PID Controller with PT100 Sensor |
| Display | Dual LED (Set & Actual Temperature) |
| Timer Range | 0–999 min |
| Power Supply | AC 220 V, 50 Hz |
| Rated Power | 1.5 kW |
| Construction | Stainless Steel (SUS430) Interior, SECC Cold-Rolled Steel Exterior with Powder Coating |
| Insulation | High-Density Glass Wool + Rock Wool |
| Door Seal | Environmentally Compliant Silicone Rubber Gasket |
| Heating Element | Nickel-Chromium Alloy Sheathed Heater |
| Air Circulation | Forced Convection via Horizontal Centrifugal Fan |
| Ventilation | Adjustable Inlet/Exhaust Ports |
| Safety Features | Over-Temperature Protection, Ground Fault Circuit Interrupter (GFCI), Independent Safety Thermostat |
| Brand | LabCompanion |
|---|---|
| Model | HH-Series 3 |
| Type | Forced-Air Circulating Drying Oven |
| Temperature Range | RT+10°C to 250°C |
| Temperature Resolution | ±0.1°C |
| Temperature Uniformity | ±0.5°C |
| Timer Range | 1–9999 min |
| Interior Dimensions (W×D×H) | 450×550×550 mm |
| Exterior Dimensions (W×D×H) | 600×710×845 mm |
| Shelving | 2 adjustable stainless steel trays |
| Power Supply | 220 V, 50 Hz, 1500 W |
| Construction | Interior – mirror-finish SUS430 stainless steel (≥1.2 mm) |
| Air Circulation | Low-noise high-temp axial fan + fully enclosed recirculating duct system |
| Compliance | Designed per IPC-TM-650 test methodology requirements |
| Interface | RS485 port for data logging and PC connectivity |
| Operating Ambient | +5°C to +40°C |
| Heating Efficiency | 35–45% (up to 50% peak) |
| Ramp Time | ~15 min (RT to 100°C) |
| Brand | LabCompanion |
|---|---|
| Model | HH-Series 1 |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (Guangdong) Co., Ltd. |
| Temperature Range | RT+10°C to 250°C |
| Temperature Resolution | ±0.1°C |
| Temperature Uniformity | ±0.5°C |
| Timer Range | 1–9999 min |
| Interior Dimensions (W×D×H) | 450 × 550 × 550 mm |
| Exterior Dimensions (W×D×H) | 600 × 710 × 845 mm |
| Standard Shelving | 2 adjustable stainless steel trays |
| Power Supply | 220 V AC, 50 Hz, 1500 W |
| Construction | Interior – mirror-finish SUS304 stainless steel (argon arc welded) |
| Heating System | Forced-air convection with high-temperature-resistant axial fan |
| Control System | Microprocessor-based digital temperature controller with RS485 interface for data logging and PC connectivity |
| Compliance | Designed per IPC-TM-650 test methodology requirements for thermal aging evaluation |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HH15 |
| Pricing | Available Upon Request |
| Temperature Range | Ambient to 260 °C |
| Control Accuracy | ±0.5 °C |
| Heating Ramp Time | ~15 min (Ambient to 100 °C) |
| Insulation Material | Imported Rock Wool |
| Interior Material | SUS430 Stainless Steel (≥1.2 mm thickness) |
| Exterior Material | SECC Cold-Rolled Steel with Powder Coating (≥1.5 mm thickness) |
| Heating Element | Honeycomb-Type Resistive Heater |
| Controller | PID Microprocessor-Based with Dual PV/SV Digital Display |
| Temperature Sensor Input | Type K (Chromel-Alumel) Thermocouple |
| Output Driver | Solid-State Relay (SSR) |
| Safety Protection | Independent Over-Temperature Cut-Off |
| Viewing Window | Dual-Layer Tempered Glass |
| Air Circulation | Forced Horizontal Airflow with Adjustable Baffle Plates |
| Circulation Motor | High-Temperature Rated Long-Shaft Motor (1 HP) |
| Fan Type | Multi-Blade Turbine Impeller |
| Timer Function | 99.9 s to 999 h |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | Hongzhan Technology Co., Ltd. |
| Model | HLT Series |
| Temperature Range | −70 °C to +150 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ≤±2.0 °C |
| Heating Rate (20 °C → +150 °C, no-load, non-linear) | ~3.5 °C/min |
| Cooling Rate (20 °C → −70 °C, no-load, non-linear) | ~1.0 °C/min |
| Interior Dimensions (W×H×D) | 305×230×285 mm to 1000×1000×1000 mm |
| Inner Material | SUS#304 Stainless Steel |
| Outer Material | Electrolytic Galvanized Steel with Powder Coating |
| Insulation | Fire-Retardant PU Foam + Glass Wool (100 mm thick) |
| Controller | EYEECON (Japan) |
| Compressor | Tecumseh (France) |
| Safety Protections | Over-temperature/under-temperature cut-off, compressor overpressure/overcurrent/overheat protection, phase sequence monitor, fan motor thermal overload protection, SSR-based PID+PWM temperature regulation |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LabCompanion HV-RT Series |
| Temperature Range | (RT + 10°C) to 55°C |
| Rainfall Intensity | 10–20 cm/h |
| Droplet Diameter | 0.5–4.5 mm |
| Wind Speed | 5–18 m/s (measured at center horizontal plane of turntable inlet) |
| Rain Exposure Duration | 1–999 min |
| Turntable Speed | 1–10 rpm |
| Turntable Diameter | Φ800 mm |
| Turntable Load Capacity | ≥65 kg |
| Internal Chamber Dimensions | 1500 × 1500 × 1600 mm (D×W×H) |
| External Dimensions | 2291 × 4200 × 3411 mm (D×W×H) |
| Power Supply | 380 V ±10%, 50 Hz ±1, 3-phase 4-wire + PE, grounding resistance <4 Ω |
| Total Power Consumption | 24 kW |
| Compliance | MIL-STD-810G Method 506.6, IEC 60529 IPX3/IPX4/IPX5/IPX6, GJB 150.8A-2009 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model Range | HLT-1000A to HLT-1000E |
| Internal Dimensions (W×D×H, cm) | 40×40×50 |
| External Dimensions (W×D×H, cm) | 107×72×135 |
| Temperature Range Options | 0–150°C |
| Humidity Range | 10–98% RH |
| Temperature Control Accuracy | ±0.3°C |
| Humidity Control Accuracy | ±2% RH |
| Temperature Uniformity | ±0.1°C |
| Humidity Uniformity | ±4% RH |
| Inner/Outer Chamber Material | SUS#304 Stainless Steel |
| Insulation | High-density polyurethane foam + silicone rubber gasket |
| Heating System | Stainless steel finned tubular heaters |
| Humidification | Steam generation system |
| Refrigeration System | Imported high-efficiency compressor |
| Control System | Digital SSR + PID controller with LCD interface |
| Standard Features | Vacuum-insulated observation window, adjustable stainless steel shelves, interior LED lighting, casters |
| Safety Protections | Over-temperature cutoff, over-current protection, compressor overload protection, low-water alarm |
| Power Supply | AC 1/3-phase, 220/380 V, 50/60 Hz |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HLT-500 |
| Price Range | USD 4,200 – 7,000 (FOB) |
| Temperature Range | −20 °C to +150 °C |
| Refrigeration Method | Mechanical Compression Cooling |
| Explosion-Proof Option | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | 1.0–3.0 °C/min |
| Cooling Rate | 1.2 °C/min |
| Working Chamber Dimensions | 500 × 600 × 500 mm (W × H × D) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Model | HLT/HA36 |
| Temperature Range | −20 °C to +125 °C (optional −40 °C / −70 °C) |
| Humidity Range | 25–98 %RH |
| Interior Dimensions (W×D×H) | 400×300×300 mm |
| Exterior Dimensions (W×D×H) | 600×670×1280 mm |
| Door Style | Top-opening lid |
| Inner Chamber Material | Stainless steel sheet |
| Outer Shell | Cold-rolled steel with powder coating (stainless option available) |
| Heating Rate (RT to +125 °C) | <40 min |
| Cooling Rate (RT to −40 °C) | <15 min |
| Temperature Uniformity | ≤2 °C |
| Temperature Stability | ≤±0.5 °C |
| Temperature Accuracy | ≤±2 °C |
| Humidity Accuracy | ±3.0 %RH (>75 %RH), ±5.0 %RH (≤75 %RH) |
| Humidification Method | Surface vaporization or pressure jetting |
| Refrigeration System | Air-cooled cascade dual-refrigerant circuit |
| Power Supply | 220 V / 50 Hz / 10 A |
| Compliance | GB/T 2423.1–4, GB 10586–89, GB 10592–89, IEC 60068-2 series |
| Safety Protections | Independent over-temperature, leakage current, overload, phase-loss, and water-deficiency safeguards |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HLT/HA36 |
| Temperature Range | −20 °C to +125 °C (optional −40 °C / −70 °C variants) |
| Humidity Range | 25–98 %RH |
| Internal Chamber Dimensions (W×D×H) | 400 × 300 × 300 mm |
| Temperature Uniformity | ≤2 °C |
| Temperature Stability | ≤±0.5 °C |
| Temperature Accuracy | ≤±2 °C |
| Humidity Accuracy | ±3.0 %RH (>75 %RH), ±5.0 %RH (≤75 %RH) |
| Heating Rate (RT to +125 °C) | <40 min |
| Cooling Rate (RT to −40 °C) | <15 min |
| Refrigeration System | Air-Cooled Dual-Stage Cascade |
| Control System | Imported Digital PID Controller with Optional IPC500 LCD Touchscreen Interface |
| Chamber Material | Stainless Steel Interior |
| Power Supply | 220 V/50 Hz, 10 A |
| Compliance | GB/T 2423.1–4, GB 10586–89, GB 10592–89, IEC 60068-2 series |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HLT/HA36 |
| Temperature Range | −20 °C to +125 °C (optional −40 °C / −70 °C) |
| Humidity Range | 25–98 %RH |
| Interior Dimensions (W×D×H) | 400 × 300 × 300 mm |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Stability | ≤ ±0.5 °C |
| Humidity Accuracy | ±3.0 %RH (>75 %RH), ±5.0 %RH (≤75 %RH) |
| Ramp Rates | Heating (RT → +125 °C) < 40 min |
| Refrigeration System | Air-Cooled Dual-Stage Cascade |
| Control Interface | Programmable Touchscreen Controller (IPC500 optional) |
| Compliance | GB/T 2423.1–4, GB 10586–89, GB 10592–89, IEC 60068-2 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HLT/HA36 |
| Temperature Range | −20 °C to +125 °C (optional −40 °C or −70 °C) |
| Humidity Range | 25–98 %RH (optional 5–98 %RH) |
| Internal Chamber Dimensions (W×D×H) | 400 × 300 × 300 mm |
| Temperature Uniformity | ≤2 °C |
| Temperature Stability | ≤±0.5 °C |
| Temperature Accuracy | ≤±2 °C |
| Humidity Accuracy | ±3.0 %RH (>75 %RH), ±5.0 %RH (≤75 %RH) |
| Heating Rate (RT to +125 °C) | <40 min |
| Cooling Rate (RT to −40 °C) | <15 min |
| Refrigeration System | Air-Cooled Dual-Stage Cascade |
| Control System | Imported Digital Temperature/Humidity Controller with Optional IPC500 LCD Touchscreen |
| Chamber Material | Stainless Steel Interior |
| External Casing | Powder-Coated Cold-Rolled Steel (stainless steel optional) |
| Door Type | Top-Hinged Lid |
| Safety Protections | Independent Over-Temperature, Leakage Current, Overload, Phase-Loss, and Water-Shortage Protection |
| Compliance | GB/T 2423.1–4, GB 10586–89, GB 10592–89, IEC 60068-2 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HLT/HA36 |
| Temperature Range | −20 °C to +125 °C (optional −40 °C / −70 °C) |
| Humidity Range | 25–98 %RH |
| Interior Dimensions (W×D×H) | 400 × 300 × 300 mm |
| Exterior Dimensions (W×D×H) | 600 × 670 × 1280 mm |
| Door Style | Top-opening lid |
| Inner Chamber Material | Stainless steel sheet |
| Outer Shell Material | Cold-rolled steel with powder coating (stainless steel optional) |
| Heating Rate | ≤40 min (room temp → +125 °C) |
| Cooling Rate | ≤15 min (room temp → −40 °C) |
| Temperature Uniformity | ≤2 °C |
| Temperature Stability | ≤±0.5 °C |
| Temperature Accuracy | ≤±2 °C |
| Humidity Accuracy | ±3.0 %RH (>75 %RH), ±5.0 %RH (≤75 %RH) |
| Humidification Method | Surface vaporization or pressure jetting |
| Refrigeration System | Air-cooled dual-stage cascade |
| Power Supply | 220 V / 50 Hz / 10 A |
| Compliance | GB 10586–1989, GB 10592–1989, IEC 60068-2, ISO 16750-4, ASTM D4332, MIL-STD-810G (environmental conditioning sections) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model Range | HLTC-800 Series (Customizable Configurations) |
| Price Range | USD 7,000 – 70,000 |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration Method | Mechanical Compression Refrigeration |
| Explosion-Proof Option | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Deviation | ±2.0 °C |
| Heating Rate | 1.0–3.0 °C/min |
| Cooling Rate | 1.2 °C/min |
| Internal Chamber Dimensions (W×D×H) | 800 × 850 × 600 mm |
| Construction | Galvanized Steel Exterior with Electrostatic Powder Coating |
| Sealing | Dual-Layer Silicone Rubber Gasket |
| Insulation | High-Density Mineral Wool (Thermal Conductivity ≤ 0.04 W/m·K) |
| Air Circulation | Adjustable Axial Fan(s), Variable-Speed |
| Optional Humidity Control (C-Series Only) | Steam Humidification with PID-Controlled Saturation System |
| Controller | 7″ Full-Color TFT Touchscreen, 32-Bit Embedded Control Architecture |
| Data Logging | Optional Real-Time Recording (USB/Ethernet Export) |
| Compliance | ISO 17025-Compatible Operation, Supports GLP/GMP Audit Trail via Optional Software Module |
| Certifications | CNAS-Recognized Design, Patented Condensation Prevention Structure (ZL201120542811.6 & ZL201520544047.4), Software Copyright No. 2015SR259433 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HP-100L / HP-150LH / HP-225LH / HP-306LH / HP-800LH / HP-1000LH |
| Temperature Range | (Ambient) 0°C to +100°C (optional +150°C) |
| Humidity Range | 38–98% RH |
| Temperature Uniformity | ≤2°C |
| Temperature Fluctuation | ≤±0.5°C |
| Humidity Accuracy | +2 / −3% RH |
| Heating Rate | ≥2–3°C/min |
| Cooling Rate | ≤1°C/min |
| Power Supply | AC 220V or 380V ±10%, 50 Hz |
| Compliance | GB/T 5170.5–1996 |
| Brand | LabCompanion |
|---|---|
| Model | HP-150 |
| Temperature Range | -70°C to +150°C (selectable variants: -20°C, -40°C min) |
| Humidity Range | 20–98% RH |
| Temp. Uniformity | ±2°C |
| Temp. Stability | ±0.5°C |
| Humidity Stability | ±1% RH |
| Heating Rate | -70°C → +150°C ≤ 90 min |
| Cooling Rate | +20°C → -70°C ≤ 80 min |
| Controller | OYO (Japan) or TEMI (Korea) Touchscreen HMI |
| Refrigeration | Hermetic Twin-Screw Compressor (Tecumseh/Tecumseh-type), Eco-friendly Refrigerant R404A/R23 Cascade System |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Interior Material | Mirror-Finish SUS304 Stainless Steel |
| Exterior Material | Powder-Coated Steel or SS304 |
| Power Supply | 3φ5W 380VAC ±10% or 2φ3W 220VAC ±10% |
| Brand | LabCompanion |
|---|---|
| Model | HP-150A |
| Temperature Range | -40°C to +150°C |
| Humidity Range | 20–98% RH |
| Temperature Accuracy | ±0.3°C |
| Humidity Accuracy | ±2.5% RH |
| Temperature Uniformity | ±0.5°C |
| Internal Dimensions (W×D×H) | 500×600×500 mm |
| Heating Rate | -40°C to +100°C in ~40 min |
| Cooling Rate | +20°C to -40°C in ~60 min |
| Control System | Korean-made PID-based LCD controller with English interface |
| Power Supply | AC380V, 50 Hz |
| Compliance | GB/T 10589–2008, GB/T 2423.22–2012, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-78 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HP-225U |
| Internal Volume | 225 L |
| Internal Dimensions (W×H×D) | 500 × 750 × 600 mm |
| Temperature Range | 0 to +150 °C |
| Humidity Range | 20–98 %RH (optional dehumidification to ≤10 %RH) |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤ ±2.0 °C |
| Humidity Deviation | ±2.5 %RH |
| Heating Rate | 0 → +150 °C in ≤20 min (~3 °C/min) |
| Cooling Rate | +20 → 0 °C in ≤20 min (~1 °C/min) |
| Refrigerant | R507 (HFC-based, ozone-friendly) |
| Control System | ETAC820 Touchscreen PLC Controller (50 programs, 2500 segments) |
| Compliance | GB/T 10586, GB/T 10592, GB/T 2423.1/3/4/34, MIL-STD-810D, GJB 150.9, IEC 60068-2-3 |
| Safety Protections | Dry-heater cutoff, independent overtemperature protection, low-water cutoff, compressor overload/overcurrent, high-pressure refrigerant switch, earth leakage protection, circuit breaker |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HP-225U |
| Pricing | Upon Request |
| Internal Volume | 225 L |
| Internal Dimensions (W×H×D) | 500 × 750 × 600 mm |
| Temperature Range | 0 to +150 °C |
| Humidity Range | 20–98 %RH (down to ≤10 %RH with optional dehumidification unit) |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤ ±2.0 °C |
| Humidity Deviation | ±2.5 %RH |
| Heating Rate | 0 → +150 °C in ≤20 min (~3 °C/min) |
| Cooling Rate | +20 → 0 °C in ≤20 min (~1 °C/min) |
| Refrigerant | R507 (HFC-based, environmentally compliant) |
| Control System | ETAC820 Touchscreen PLC Controller (50 programs, 2500 segments) |
| Compliance | GB/T 10586, GB/T 10592, GB/T 2423.3, GB/T 2423.4, MIL-STD-810D, GJB 150.9, IEC 60068-2-3 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HP-408U |
| Internal Volume | 408 L |
| Internal Dimensions (W×H×D) | 600 × 850 × 800 mm |
| Temperature Range | 0 to +150 °C |
| Humidity Range | 20–98% RH (optional dehumidification to ≤10% RH) |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤ ±2.0 °C |
| Humidity Deviation | ±2.5% RH |
| Heating Rate | 0 → +150 °C in ≤20 min (~3 °C/min) |
| Cooling Rate | +20 → 0 °C in ≤20 min (~1 °C/min) |
| Refrigerant | R507 (HFC-based, ozone-friendly) |
| Control System | ETAC820 Touchscreen PLC Controller (50 programs, 2500 segments, USB data export, LAN remote monitoring) |
| Construction | SUS304 stainless steel interior, powder-coated cold-rolled steel exterior, high-density polyurethane + fiberglass insulation |
| Safety Protections | Dry-heater cutoff, independent over-temperature cutoff, low-water detection, compressor overload/overcurrent protection, high-pressure refrigerant switch, earth leakage protection |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HP-80 |
| Price | Upon Request |
| Working Chamber Dimensions (D×W×H) | 450×450×500 mm |
| External Dimensions (D×W×H) | 1100×750×1600 mm |
| Power Consumption | 3.8 kW |
| Temperature Range | 0°C to 100°C |
| Humidity Range | 30–98% RH |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Humidity Deviation | +2 / −3% RH |
| Heating Rate | 0°C → 100°C in ≈35 min |
| Cooling Rate | 100°C → 0°C in ≈40 min |
| Control Accuracy | ±0.1°C (temp), ±1% RH (humidity) |
| Sensor Type | PT100 Platinum Resistance Thermometer & Capacitive RH Sensor |
| Refrigeration System | Hermetic Air-Cooled Single-Stage Compressor (Original Tecumseh, France) |
| Humidification Method | External Stainless Steel Surface Evaporation |
| Dehumidification Method | Direct Expansion Dew-Point Contact via Evaporator Coil |
| Air Circulation | Low-Noise AC Motor with Multi-Blade Centrifugal Impeller |
| Insulation | Rigid Polyurethane Foam + Ultra-Fine Glass Fiber |
| Compliance | GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.3–1993 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HP-80U |
| Internal Volume | 80 L |
| Interior Dimensions (W×H×D) | 400 × 500 × 400 mm |
| Temperature Range | 0 to +150 °C |
| Humidity Range | 20–98 %RH (optional dehumidification to ≤10 %RH) |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤ ±2.0 °C |
| Humidity Deviation | ±2.5 %RH |
| Heating Rate | 0 → +150 °C in ≤20 min (~3 °C/min) |
| Cooling Rate | +20 → 0 °C in ≤20 min (~1 °C/min) |
| Refrigerant | R507 (HFC-based, ozone-friendly) |
| Control System | ETAC820 Touchscreen PLC Controller (50 programs / 2500 segments) |
| Compliance | GB/T 10586, GB/T 10592, GB/T 2423.1/3/4/34, MIL-STD-810D, GJB 150.9, IEC 60068-2-3 |
| Power Supply | AC 220±10 V / 50±0.5 Hz (single-phase) or AC 380±10 V / 50±0.5 Hz (three-phase) |