- All
- Favorite
- Popular
- Most rated
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Construction | Full PVC-Coated Steel Frame with Reinforced Structural Bracing |
| Spray Method | Programmable or Continuous Salt Fog Generation |
| Control System | Dual-Channel PID Digital Controller (Lab Chamber & Saturated Air Tank) |
| Temperature Range | 10–60°C (Lab Chamber), 20–70°C (Saturated Air Tank) |
| Humidity Range | 30–98% RH (Controlled via Henry’s Law-Based Saturated Air Delivery) |
| Salt Spray Rate | 1.0–2.0 mL/80 cm²/h (Adjustable via Conical Diffuser & Precision Pressure Regulation) |
| Safety Protections | Dual Over-Temperature Cut-Off, Low-Water Level Alarm, Auto-Replenishment Feed System |
| Nozzle Material | Borosilicate Glass (≥4000 hr crystallization-free operation) |
| Display Resolution | ±0.3°C (Temperature), ±0.01 kg/cm² (Pressure), 0.1 hr (Timer) |
| Compliance | ASTM B117, ISO 9227, JIS Z2371, GB/T 10587 |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OK-FH-9.00 |
| Spray Mode | Continuous Atomization |
| Nozzle Pressure | 0.7–1.0 kgf/cm² |
| De-misting Method | Air-pressurized Exhaust |
| Salt Fog Deposition Rate | 1.0–2.0 mL/80 cm²/h (16-h average) |
| Temperature Range | −10°C to +80°C |
| Humidity Range | 20–98% RH |
| Temp. & Humidity Control Accuracy | ±0.5°C / ±2.0% RH |
| Uniformity | ±2.0°C / ±3.0% RH |
| Chamber Temp. (NSS) | 35±1°C |
| Chamber Temp. (CASS) | 50±1°C |
| Saturation Tower Temp. (NSS) | 47±1°C |
| Saturation Tower Temp. (CASS) | 63±1°C |
| Salt Solution Temp. | 35±1°C or 50±1°C |
| NaCl Concentration | 5.0 wt% (with optional 0.26 g/L CuCl₂·2H₂O for CASS) |
| Compressed Air Pressure | 1.00±0.01 kgf/cm² |
| Refrigeration System | Hermetic Dual-stage Low-Noise Compressor (R404A/R23) |
| Controller | 7-inch Color LCD Touchscreen (OYO U-8256P, bilingual EN/CN) |
| Program Capacity | 140 Patterns × 1400 Steps |
| Loop Repetition | 1–999 cycles per segment |
| Segment Duration | 0–999 h 59 min |
| Power Failure Recovery | Yes |
| Interface | RS232 |
| Power Supply | 220V±5% / 50±0.5 Hz or 380V±5% / 50±0.5 Hz |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Program Groups | 120 |
| Total Program Segments | 1,200 |
| Max Repetitions per Command | 999 |
| Segment Duration Range | 0–99 h 59 min |
| Power-Failure Recovery | Yes, auto-resume with state retention |
| Real-Time Graphical Curve Display | Yes |
| PID Parameter Sets | 9 independent groups |
| Saturation Chamber | Heated, oil-filtered, humidity-conditioned air supply |
| Spray Mode | Pneumatic atomization (continuous or intermittent) |
| Compressed Air Control | Regulated via precision pressure-reducing valve + solenoid shut-off valve |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 21,500 (FOB) |
| Internal Chamber Dimensions | 600 × 450 × 400 mm / 900 × 600 × 500 mm / 1200 × 840 × 500 mm (W×D×H) |
| Chamber Material | 5 mm PVC board (heat-resistant up to 85°C) |
| Lid Material | 5 mm impact-resistant acrylic |
| Test Standards Compliant | ASTM B117, ISO 9227, JIS Z2371, CNS 12207, GB/T 10587 |
| Salt Spray Modes | Neutral Salt Spray (NSS), Acetic Acid Salt Spray (AASS), Copper-Accelerated Acetic Acid Salt Spray (CASS) |
| Test Chamber Temp Control | 35°C ±1°C (NSS/AASS), 50°C ±1°C (CASS) |
| Saturated Air Chamber Temp Control | 47°C ±1°C (NSS/AASS), 63°C ±1°C (CASS) |
| Timer Range | 0–999.9 h (Italian-made digital timer) |
| Water Supply System | Dual-mode (automatic + manual) for chamber and saturator |
| Temperature Controller Resolution | ±0.3°C (LCD digital PID controller) |
| Pressure Regulator | Precision air filter + pressure gauge (0–2.5 kg/cm², accuracy ±0.01 kg/cm²) |
| Safety Protections | Low-water cutoff, overtemperature shutdown, salt-solution level alarm, visual warning indicators |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+5°C to 55°C |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Spray Mode | Air-Atomized (Continuous or Cyclic) |
| Internal Dimensions | 600 × 450 × 400 mm (L×W×H) |
| External Dimensions | Approx. 1075 × 1185 × 630 mm (L×W×H) |
| Saturated Air Heater Range | RT+47°C to 63°C |
| Power Supply | 220 V, 1.5 kW, 50 Hz |
| Key Features | Temperature Range: +5°C to 55°C |
|---|---|
| Humidity Range | 85–95% RH |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Stability | ≤ ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL/80 cm²·h |
| Spray Modes | Continuous or Cyclic |
| Test Timing | 1–999 sec/min/hr (adjustable) |
| Chamber Construction | 6 mm PVC-coated chamber walls (heat-resistant to 80°C), SUS#304 stainless steel saturated air tank, transparent acrylic impact-resistant lid |
| Air Supply System | Two-stage pressure regulation (1 kg/cm²), integrated particulate filtration |
| Sample Rack | Adjustable flat-angle fixture (15°/30°), multi-directional fog exposure |
| Compliance | Designed per CNS, JIS Z 2371, ASTM B117 (NSS), ASTM G85 Annex A2 (CASS) |
| Models | OK-FH-150B / OK-FH-250B / OK-FH-750B |
| Power Consumption | 1.3 kW / 1.5 kW / 1.8 kW |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Temperature Range | RT+10°C to 60°C ±1°C |
| Temperature Uniformity | ±1.0°C |
| Temperature Fluctuation | ±1°C |
| Salt Spray Deposition Rate | 1–2 mL/80 cm²·h |
| Salt Solution Temperature | RT+10°C to 60°C ±1°C |
| Salt Concentration | 5.0 ±0.5% (w/w) NaCl |
| Humidity Range | 30–98% RH (adjustable) |
| Salt Solution Capacity | ~40 L |
| Operation Mode | Continuous or Intermittent |
| Spray Method | Air-Atomized (Compressed Air Driven) |
| Gas Saturation System | Heated, Deoiled, Humidified Saturated Air Supply |
| Safety Features | Low-Water-Level Cut-off, Over-Temperature Protection, Leakage Current Protection, Real-Time Visual Alarm Indication |
| Control Interface | Touchscreen HMI with Bilingual (EN/CN) Display, Graphical Program Curve Visualization, PID Auto-Tuning (9 Sets), Dry/Wet Bulb Auto-Calibration |
| Compliance Standards | GB/T 2423.17–1993, GB/T 5170.8–1996, GB/T 10587–2006 |
| Brand | OK Instruments |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 50°C |
| Humidity Range | 85–98% RH |
| Temperature Uniformity | ≤2°C |
| Temperature Fluctuation | ±0.5°C |
| Salt Solution Concentration | 0.1–1% v/v |
| Spray Method | Compressed Air Atomization (PYREX Glass Nozzle) |
| Saturated Air Tank Control | Henry’s Law-Based Heating & Humidification |
| Test Modes | Continuous Salt Spray (ASTM B117), Cyclic Salt Spray (GB/T 10587, ISO 9227), NSS/ASS/CASS Protocols |
| Chamber Models | OK-SH-60 (850×1300×600 mm), OK-SH-80 (850×1600×600 mm), OK-SH-120 (900×2000×600 mm) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Chamber Volume | 3–116 m³ |
| Temperature Range | RT+10 to 55 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Stability | ±0.5 °C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Chamber Construction | 8 mm High-Temperature Resistant PVC Panels |
| Saturated Air Tank | SUS304 Stainless Steel with Level Indicator |
| Heating Element | Titanium Alloy Immersion Heater |
| Compliance | ASTM B117, ISO 9227, IEC 60068-2-11, DIN 50021, JIS Z2371, GB/T 2423.17 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 50°C |
| Humidity Range | 85–98% RH |
| Temp. Uniformity | ≤2°C |
| Temp. Stability | ±0.5°C |
| Salt Solution Concentration | 0.1–1% v/v |
| 雾 Generation Method | Compressed Gas (N₂ or Air) via Precision PYREX Nozzle |
| Test Modes | Continuous (ASTM B117), Cyclic (GB/T 2423.17, GB/T 2423.18, ISO 9227), NSS/ASS/CASS Protocols |
| Chamber Dimensions (OK-FH-60 / -80 / -120) | 850×1300×600 mm / 850×1600×600 mm / 900×2000×600 mm (D×W×H) |
| Saturated Air Tank Temp. | 47°C (NSS), 63°C (CASS) |
| Control System | PID-Based Digital Controller with Programmable Cycle Sequencing |
| Safety Features | Dual Over-Temperature Protection, Low-Water Level Alarm, Crystallization-Resistant Nozzle Design |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Compliance Standards | ASTM B117, ISO 9227, IEC 60068-2-11, JIS Z 2371, GB/T 2423.17 |
| Chamber Capacities (L) | 108 |
| Internal Dimensions (W×D×H, cm) | 60×45×40 |
| External Dimensions (W×H×D, cm) | 110×60×118 |
| Temperature Range | 35°C ± 1°C (salt fog), 15–60°C (dry/humidity cycles) |
| Humidity Control | 30–98% RH (optional) |
| Spray Nozzle Pressure | 0.8–1.2 bar (dual-stage pressure regulation) |
| Salt Solution Concentration | 5.0 ± 0.1% NaCl (by weight) |
| Saturation Tank Material | 3 mm SUS#304 stainless steel |
| Chamber Lining | 8 mm heat-resistant HC-PVC |
| Heating Element | Titanium alloy immersion heater |
| Circulation Fan | Oriental Motor multi-wing centrifugal blower |
| Corrosion-Resistant Pump | Ebara or ITT series |
| Control Interface | LCD with RS232 communication |
| Safety Protections | Low water level, overtemperature, motor overload, spray blockage detection |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Quotation | USD 12,500 (FOB) |
| Chamber Dimensions | W120 × H50 × D100 cm |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Spray Mode | Continuous or Cyclic (Programmable) |
| Operating Temperature Range | +5°C to 60°C |
| Chamber Construction | Dual-layer UV-stabilized gray PVC with circumferential band-reinforced welded joints |
| Heating System | Independent Ni-Cr alloy heaters with PT100Ω RTD sensing |
| Control System | LED-display PID temperature controller with real-time logging capability |
| Spray System | Tower-type atomizer with non-crystallizing nozzles |
| Accessories | Standard漏斗 (funnel) & calibrated measuring cylinder, inline water filtration for brine supply, pre-heated brine delivery ensuring thermal equilibrium with chamber ambient |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Internal Chamber Dimensions (W×D×H) | 600 × 450 × 400 mm |
| Test Temperature Range | 35–50 °C (Chamber), 47–63 °C (Saturated Air Tank) |
| Temperature Uniformity | ±0.5 °C |
| Temperature Control Accuracy | ±0.1 °C (PID Digital Controller) |
| Humidity Control Method | Saturated Air Tank (Henry’s Law Principle) |
| Spray Nozzle Material | Borosilicate Glass (PYREX®) |
| Spray Mode | Continuous (ASTM B117) or Cyclic (GB/T 2423.17, GJB 150.11A, DIN 50021) |
| Safety Features | Dual Over-Temperature Protection, Auto Water-Level Detection & Refill, Crystallization-Free Fog Distribution |
| Heating System | Jacketed Water Bath with Titanium-Sheathed Infrared Heaters (Ni-Cr Core) |
| Compliance | GB/T 2423.17, GB/T 10587, GJB 150.11A, ASTM B117, ISO 9227, DIN 50021 |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Compliance Standards | ASTM B117, ISO 9227, GB/T 2423.17–2022, IEC 60068-2-11, MIL-STD-810H (Salt Fog), DIN 50021 |
| Temperature Range | +10°C to +70°C |
| Humidity Range | 30–98% RH |
| Salt Solution Temperature Control | Ambient to +50°C |
| Power Supply | AC 220V ±10% / 380V ±10%, 50 Hz |
| Safety Protections | Over-temperature, leakage current, short-circuit, low-water level, over-current, end-of-test auto-shutdown |
| Sealing Method | Water-seal labyrinth structure |
| Brand | OK Instruments |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OK-FH-90.001 |
| Spray Mode | Continuous Atomization |
| Spray Rate | 1–2 mL / 80 cm²·hr |
| Nozzle Pressure | 0.7–1 kg/cm² |
| Fog Removal Method | Air-Pressure Exhaust |
| Salt Deposit Rate | ~1.0–2.0 mL/80 cm²·hr (per ASTM B117 calibration) |
| Temperature Range Options | A: 0°C to +80°C |
| B | −20°C to +80°C |
| C | −40°C to +80°C |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 12,500 (approx.) |
| Thickness Range | 0.03–99 µm |
| Potential Difference Range | −100 to +400 mV |
| Thickness Accuracy | ±10% |
| Potential Difference Accuracy | ±5% |
| Reproducibility | <5% RSD |
| Display | 4-digit LED, two decimal places |
| Temperature Control (Chamber) | 0–99.9 °C, PID-controlled, resolution ±0.3 °C |
| Saturated Air Chamber Temp | 0–99.9 °C, PID-controlled, resolution ±0.3 °C |
| Heating Tank Safety Limit | 0–120 °C |
| Saturated Air Tank Safety Limit | 0–120 °C |
| Timer Range | 9.9 s–9990 h |
| Elapsed Time Meter | 0–9999.9 h |
| Air Pressure Regulator | Precision filter included |
| Pressure Gauge | 0–2.5 kg/cm², accuracy 0.01 kg/cm² |
| Toggle Switch | Illuminated, rated for ≥20,000 actuations |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 12,500 (FOB) |
| Chamber Internal Dimensions (W×D×H) | 900 × 600 × 500 mm |
| External Dimensions (W×D×H) | 1420 × 780 × 1280 mm |
| NSS Test Temp | 35 ± 1 °C |
| SATURATION AIR TANK TEMP (NSS) | 47 ± 1 °C |
| CASS Test Temp | 50 ± 1 °C |
| SATURATION AIR TANK TEMP (CASS) | 63 ± 1 °C |
| Air Supply Pressure | 1 kg/cm² (two-stage regulation) |
| Safety | Low-water cutoff, overtemperature cutoff, low-brine-level alert, visual alarm indicators |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Chamber Volume Options | 108 L / 270 L / 480 L |
| Temperature Range | +5°C to +55°C |
| Humidity Range | 85–95% RH |
| Temp. Uniformity | ≤ ±2°C |
| Temp. Stability | ≤ ±0.5°C |
| Salt Deposition Rate | 1–2 mL/80 cm²·h |
| Spray Mode | Continuous or Cyclic (Programmable) |
| Timer Range | 1 min to 999 h |
| Heating Power | 1.3–1.8 kW |
| Input Voltage | AC 220V±10% / 380V±10%, 50 Hz |
| Compliance | GB/T 2423.17–2022, IEC 60068-2-11, ASTM B117, ISO 9227, MIL-STD-810H, DIN 50021 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Temperature Range | RT+10 °C to 70 °C |
| Salt Solution Circulation | Dual-pump alternating system |
| Dwell Time Control | Adjustable up/down immersion intervals (0.01 s–9999 hr) |
| Total Test Duration | Programmable 0.01 s–9999 hr |
| Cycle Counter | 0–99999 cycles (resettable) |
| Compliance | GB/T 2423.17, GB/T 10587, GJB 150.11A, DIN 50021, ISO 9227 (as applicable) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Compliance | GB/T 2423.17, GB/T 5170.8, GB/T 10587, IEC 60068-2-11, ASTM B117, DIN 50021, MIL-STD-810G Method 509.6 |
| Operating Ambient | 0–35 °C, ≤85% RH, 86–106 kPa |
| Sample Orientation | 15°–30° from vertical (flat specimens), horizontal (components/equipment) |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Power Supply | AC 220 V ±10% / 50 Hz or AC 380 V ±10% / 50 Hz |
| Operating Ambient | 5–30 °C, ≤85% RH |
| Chamber Construction | Fiberglass-Reinforced Polymer (FRP) Monolithic Body |
| Sealing Method | Water-Seal Lid Design |
| Safety Protections | Overtemperature, Leakage Current, Short-Circuit, Low-Water Level, Overcurrent, End-of-Test Auto-Shutdown |
| Standard Accessories | V-Type Sample Racks (2 pcs), Dual Nozzles, Calibration Funnel & Graduated Cylinder, Water Filter on Brine Suction Line, Preheated Brine Delivery System |
| Compliance Standards | GB/T 2423.17–2022, IEC 60068-2-11, ASTM B117, ISO 9227, MIL-STD-810H (Method 509.6), DIN 50021 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 12,500 (FOB) |
| Internal Dimensions (D×W×H) | 60×90×50 cm |
| External Dimensions (D×W×H) | 106×155×121 cm |
| Temperature Range | RT+10°C to 55°C |
| Humidity | ≥93% RH |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Fog Deposition Rate | 1–2 mL/80 cm²/h |
| Spray Mode | Continuous or Cyclic (Selectable) |
| Sample Rack | Dual-layer, Adjustable Tilt (15°–30°) |
| Compressor Requirement | V-0.013/12.5 (User-supplied) |
| Discharge Pressure | 1.25 MPa |
| Air Flow | 0.13 m³/min |
| Heating System | Water-jacketed with Titanium-sheathed NiCr Far-infrared Heater |
| Chamber Material | PVC Plastic Board (UV-stabilized, acid/salt-resistant) |
| Lid Material | Transparent Impact-resistant Polycarbonate |
| Sealing | Water-sealed Lid-to-Body Interface |
| Compliance | GB/T 2423.17, GB/T 10587, GJB 150.11A, DIN 50021, ISO 9227 (Neutral Salt Spray NSS), ASTM B117 |
Show next