Industry-specific Instruments
Filter
Showing 691–720 of 2171 results
| Key | Brand: EUROTECH |
|---|---|
| Origin | Italy |
| Model | F3A-3LAYERS |
| Screw Diameter | 25–40 mm |
| L/D Ratio | 25–30 |
| Max. Extruder Torque | 500 N·m (closed-loop controlled) |
| Max. Barrel Temperature | 450 °C |
| Melt Pressure & Temperature Monitoring | Yes |
| Die Diameter Options | 50 / 60 / 80 mm |
| Die Gap | 1.0 mm & 1.5 mm |
| Bubble Diameter Control | Automatic |
| Max. Film Width | 300 mm |
| Haul-off Speed | Up to 15 m/min |
| Tension Control Range | 0–20 N |
| Cooling System | Julabo chiller-integrated air/water cooling |
| Remote Interface | Web-based HMI + OPC UA compliant |
| Compliance | CE, ISO 9001-aligned design principles |
| Drive System | Maintenance-free AC servo motors with vector control |
| Brand | Eurotech |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | D20-35 |
| Price Range | USD 42,000 – 70,000 |
| Brand | HORIBA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | Evaluator HT Series |
| Pricing | Upon Request |
| Brand | EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | EW-SDCT-100 |
| Pricing | Available Upon Request |
| Brand | EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SysNova 1000AEM |
| Pricing | Available Upon Request |
| Brand | EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SysNova 1000FC |
| Pricing | Available Upon Request |
| Brand | EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SysNova 1000MF |
| Pricing | Available Upon Request |
| Brand | EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Regional Category | Domestic (China) |
| Model | SysNova 1000PEM |
| Pricing | Upon Request |
| Brand | EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SysNova SF3000 |
| Pricing | Upon Request |
| Brand | Exaddon |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CERES |
| Pricing | Upon Request |
| Brand | ExtraSolution |
|---|---|
| Origin | Italy |
| Model | CarboPack BT |
| Application Domain | Packaging Industry – CO₂ Transmission Rate (CO₂TR) Measurement |
| Detection Principle | Non-Dispersive Infrared (NDIR) with Dual-Wavelength Subsystem |
| Temperature Control Range | Ambient to 60 °C (heating/cooling system integrated) |
| Humidity Control Capability | Optional RH-controlled testing up to 90% RH |
| Measurement Time per Sample | < 60 minutes |
| Detection Limit | Sub-ppm CO₂ flux resolution |
| Compliance Context | Designed for ASTM F2622, ISO 15105-2, and EU Regulation (EC) No. 1935/2004–compliant packaging validation workflows |
| Brand | ExtraSolution |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PackPerm |
| Pricing | Available Upon Request |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 000-001-305 |
| Test Method Compliance | ASTM D2670, D2625, D3233, D5620 |
| Load Range | 200–3000 lbf (±2% FS) |
| Rotational Speed | 290 ± 10 rpm |
| Torque Measurement | 0–100 in-lb (±2% FS) |
| Wear Resolution | 0.001 inch (0.025 mm) per 14.4 ratchet clicks |
| Operating Temperature | Ambient to 100 °C |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 001-001-331 |
| Test Type | Friction and Wear |
| Load Capacity (Standard) | 805 lbf |
| Load Capacity (Optional) | 1300 lbf |
| Speed Range | Programmable RPM Control |
| Temperature Range (Standard Chamber) | Ambient to 200 °C |
| Temperature Range (Pressurized Chamber, Optional) | Ambient to 250 °C |
| Sub-ambient Testing | Available with External Chiller |
| Friction Force Measurement Range (Standard) | 0–250 lbf |
| Friction Force Measurement Range (Optional Low-Load Sensor) | 0–25 lbf |
| Compliant Standards | ASTM D2714, D2981, D3704, D2509, D2782, G77 |
| Test Geometries | Block-on-Ring, Conforming Block-on-Ring, Timken Canted Cylinder, Chip-on-Ring, Ball-on-Ring |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 006‐001‐330 |
| Testing Type | Friction and Wear |
| Compliance | ASTM D3702, D2266, D4172, D5183, G99 |
| Speed Range | 30–3600 rpm (standard), 0.01–10,000 rpm (with optional gear reducer) |
| Load Range | 1–160 lbf (2:1 lever), 20–800 lbf (10:1 lever) |
| Temperature Range | Ambient to 150°C (standard), 30–200°C (with optional heating/cooling modules) |
| Control | Computer-controlled servo motor, pneumatic auto-loading (programmable), real-time torque & displacement monitoring |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 016-001-002 |
| Test Method Compliance | ASTM D3336, SH/T 0428 |
| Maximum Rotational Speed | 20,000 rpm (light-load condition) |
| Axial Load Capacity | 15 lbs (mechanically applied) |
| Heating Chamber Max Temperature | 371 °C |
| Torque Measurement | Digital display with high/low torque shutdown threshold |
| Drive Motor | Dual 1 HP, single-phase AC motors with thermal protection |
| Timing Control | Digital on/off elapsed-time counter |
| Standard Shaft | CRC-type shaft |
| Application Focus | Grease-lubricated ball bearing life evaluation under accelerated thermal–mechanical stress |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 081-001-005 |
| Test Principle | Oscillating Ball-on-Cylinder Tribometry |
| Applied Load | 2450 N (550 lbf) |
| Test Duration | 22 h |
| Oscillation Frequency | 30.0 Hz (1800 cpm) |
| Compliance Standards | ASTM D4170, SH/T 0716 |
| Optional Feature | Load Uniformity Adjustment System |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 089-001-001 |
| Testing Mode | Wear, Extreme Pressure (EP), and KRL Rolling Fatigue |
| Speed Range | 1–2500 rpm |
| Load Range | 1–1000 kg (standard) |
| optional low-load system | 0–150 ±0.2 kg |
| Compliance | ASTM D2266, D4172, D5183, D2596, D2783 |
| Safety | Interlocked pneumatic loading enclosure |
| Control | Touchscreen interface with programmable cycle counter and elapsed time timer |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 450-001-002 |
| Heating Tube Temperature Range | 300–450 °C |
| Temperature Control Accuracy | ±2 °C |
| Flow Rate Range | 0.55–10.0 mL/min |
| Pressure Range | 0–200 psi |
| Test Duration | 2.5–500 hours |
| Sample Reservoir Temperature | 100–210 °C |
| Sample Volume | 100 mL–1 L |
| Compliance | SAE ARP 5996B, SAE AS5780 |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | FAL400 |
| Compliance | ASTM D3241, IP 323, GB/T 9169 |
| Heating Tube Certification | ASTM D3241 Table 2 Note c, IP 323 Table A.1 |
| Automation | Fully automated air purge (1.5 L/min), pre-test pump priming (60 s), flow verification at start/end |
| Pump System | Dual HPLC-grade precision pumps, pulse-free flow delivery |
| Control System | Embedded microprocessor (non-Windows), corrosion-resistant color touchscreen |
| Safety | Interlocked safety shield with real-time alarm |
| Filtration | Integrated activated carbon fume scrubber |
| Optional Accessory | FAL430 Deposit Rating Ellipsometer (ellipsometric thickness & 3D topography measurement) |
| Brand | Falex |
|---|---|
| Origin | USA |
| Model | 002‐001‐003 |
| Testing Principle | Timken EP Test (ASTM D2509, ASTM D2782, SH/T 0203) |
| Maximum Applied Load | 92,300 psi (on 0.022 in. wide Timken test block) |
| Rotational Speed | 800 rpm ± 5 rpm (adjustable up to 850 rpm) |
| Test Duration | 10 min ± 15 s |
| Temperature Control Range | Ambient to 120 °C (digital PID controller with fluid circulation system) |
| Oil Reservoir Capacity | 3 L (heated, pumped, valve-controlled |
| Grease Auto-Feeder Rate | 45 ± 9 g/min |
| Drive Motor | 2 HP, unidirectional, with RPM display |
| Load Application | Static load via 10:1 lever arm |
| Sample Types | Liquid lubricants and greases |
| Compliance | ASTM D2509, ASTM D2782, SH/T 0203 |
| Brand | Fangyuan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | YG026PC |
| Force Range | 500 cN to 50,000 N (selectable) |
| Load Resolution | 1/50,000 of full scale |
| Force Accuracy | Class 0.5 (±0.5% of reading at 2–120% of sensor range |
| Maximum Travel | 1100 mm |
| Elongation Resolution | 0.01 mm |
| Effective Width | 420 mm |
| Data Sampling Rate | ≥800 Hz |
| Onboard Storage Capacity | ≥4,000 test records |
| Test Speed | 0.1–1000 mm/min |
| Dimensions (L×W×H) | 850×500×1800 mm |
| Weight | 280 kg |
| Brand | Farrel |
|---|---|
| Origin | USA |
| Model | 9UM |
| Type | Continuous Twin-Screw Mixer for Rubber & Thermoplastic Compounding |
| Production Capacity | 400–40,000 kg/h |
| Rotor Configuration | Intermeshing Co-Rotating Twin Screw |
| Drive System | Variable-Frequency Motor with Precise Speed Control (0–600 rpm) |
| Barrel Temperature Control | Zone-wise Electric Heating + Water Cooling (±1°C stability) |
| PLC Interface | Touchscreen HMI with Data Logging, Recipe Management, and Audit Trail Capability |
| Compliance | Designed to Support GLP/GMP Environments per ASTM D3418, ISO 1133, and USP <1043> for Polymer Processing Validation |
| Brand | Farrel |
|---|---|
| Origin | USA |
| Model | 9UM |
| Type | Continuous Twin-Screw Mixer for Rubber & Thermoplastic Compounding |
| Feed Capacity | 400–40,000 kg/h |
| Rotor Configuration | Co-rotating, Intermeshing Twin-Screw |
| L/D Ratio (LCM variants) | 10:1 |
| Control System | PLC with HMI Touchscreen Interface |
| Modular Design | Yes |
| Compliance | Designed for ASTM D3765, ISO 252, and ISO 1133-compliant compound development workflows |
| Integration Ready | Compatible with Farrel FMP™ Melt Pumps and Underwater Pelletizing Systems |
| Brand | Farrel |
|---|---|
| Origin | USA |
| Model | BR1600 |
| Chamber Net Volume | 160 L |
| Fill Factor | 75% (at 1.0 g/cm³ density: ~120 kg batch) |
| Rotor Type | Tangential ST™/NST™ Four-Wing Design |
| Temperature Control | Closed-Loop Water-Cooled Chamber & Rotors |
| Optional Features | Hydraulic Ram Loader, Hardened Wear-Resistant Surfaces, Customized Rotor Geometry |
| Compliance | Designed to meet ASTM D3418, ISO 6502, and rubber compounding process validation requirements for R&D and pilot-scale GLP environments |
| Origin | UK |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FAST Fabric Assessment System |
| Price | USD 16,200 (FOB UK) |
| Brand | Ayalytical |
|---|---|
| Model | FeDDI |
| Origin | USA |
| Type | Automated Image-Based Corrosion Quantification Instrument |
| Compliance | ASTM D665, GB/T 11143, NACE TM-0172 |
| Brand | Fengtu |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | FT-P108 |
| Price | USD 4,500 (FOB Qingdao) |
| Sample Capacity | 8 × 0.2 mL tubes |
| Temperature Range | 4–99 °C |
| Thermal Accuracy | ±0.1 °C |
| Temperature Uniformity | ≤±0.25 °C |
| Max Heating/Cooling Rate | 5.5 / 5.0 °C/s |
| Excitation Wavelength | 460–480 nm |
| Emission Detection Range | 505–525 nm |
| Sensitivity | Single-copy DNA detection |
| Dynamic Range | 10¹–10¹⁰ copies |
| Linearity (R²) | ≥0.999 |
| Inter-well CV | <1% |
| Supported Chemistries | SYBR Green I, FAM |
| Optical System | High-power LED + Photodiode detector |
| Control Interface | Built-in Android touchscreen + PC software |
| Data Export | CSV, PDF, Excel |
| Compliance | CE-marked, ISO 13485-aligned design principles |
| Brand | Fengtu |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | FT-SD2 |
| Price | USD 12,200 (FOB Qingdao) |
| Brand | Fengtu |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TQ-BZ2 |
| Price | USD 3,200 (FOB) |
| Power Supply | 220 VAC / Optional 480 W–200 Ah Solar Kit |
| Operating Temperature | −20 °C to +70 °C |
| Relative Humidity | 0–95% RH (non-condensing) |
| Dimensions | 600 × 640 × 1418 mm |
| Imaging Sensor | 8 MP CMOS |
| Microscopy Resolution | Capable of resolving spores 5–100 µm in diameter |
| Sampling Area | 50 × 21 mm per capture cycle |
| Sampling Duration | Adjustable from 60 to 1200 minutes |
| Data Transmission | 4G LTE (TCP/IP), DNS-enabled, SIM-based |
| Display | 10.4″ TFT-LCD with Windows 10 OS |
| Power Consumption | ≤65 W (startup), ≤50 W (operational), ≤26.4 W (standby) |
| Insulation Resistance | ≥2.5 MΩ |
| Slide Carrier Lifespan | Up to 365 days at 3 captures/day |
| Motorized Stage | Dual-axis (X/Y) precision stepper control |
| Airflow Design | Optimized laminar ducting for reduced particle re-entrainment and improved collection efficiency |