Optical Laboratory Equipment
Filter
Showing 721–750 of 1780 results
| Brand | HanDing (HT) |
|---|---|
| Mounting Aperture | 50 mm |
| Design | Kinematic, Three-Axis Adjustable, Open-Frame Configuration |
| Material | Anodized Aluminum Alloy (6061-T6) |
| Angular Adjustment Range | ±4° per Axis (Pitch/Yaw/Roll) |
| Repeatability | ≤5 arcsec |
| Load Capacity | ≤300 g |
| Compatibility | Standard Ø50 mm optics (up to 6 mm thickness) |
| Surface Finish | Black anodized, non-reflective matte coating |
| Brand | Han Ding (HT) |
|---|---|
| Mounting Aperture | 50 mm & 50.8 mm (2") |
| Compatibility | Standard Ø1" and Ø2" Optics |
| Construction | Aluminum Alloy (Anodized Black) |
| Adjustability | Dual-Axis Tip/Tilt with Micrometer-Driven Kinematic Kinematics |
| Repeatability | ≤ ±2 arcsec |
| Load Capacity | ≤ 500 g |
| Thread Standard | M6 (Metric) and 1/4"-20 (Imperial) Base Mounting Holes |
| Surface Finish | Black Anodized for Low Scatter and Corrosion Resistance |
| Brand | Han Ding (HT) |
|---|---|
| Model | HTMM50-C |
| Mounting Aperture | 50 mm |
| Actuation Type | Closed-Loop Piezoelectric Positioning |
| Degrees of Freedom | Tip/Tilt (2-Axis) |
| Max. Load Capacity | 300 g |
| Repeatability | < 50 nm (typ.) |
| Resolution (closed-loop) | < 10 nm |
| Material | Anodized Aluminum 6061-T6 with Stainless Steel Adjustment Components |
| Thermal Drift | < 0.5 µrad/°C (over 20–30 °C) |
| Compatibility | Standard Ø1" (25.4 mm) to Ø2" (50.8 mm) optics, optimized for 50 mm clear aperture mirrors |
| Interface | M4 and M6 threaded mounting holes (bottom), SM2 (2.032") internal thread on top plate for direct optic retention |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Model | HTMM50-CS |
| Material | 304 Stainless Steel |
| Mounting Aperture | 50 mm |
| Adjustment Range (Pitch/Yaw) | ±2.5° |
| Resolution (Fine Adjustment) | <10 arcsec per division |
| Load Capacity | ≤1.5 kg |
| Surface Finish | Electropolished |
| Compatibility | Standard SM1 (1.035"-40) threaded optics carriers |
| Mounting Base | M6 threaded holes (grid pitch 25 mm) |
| Brand | HT (Handing) |
|---|---|
| Model | HTMM50-O |
| Mounting Aperture | 50 mm |
| Adjustment Axes | Tip/Tilt (X-Y angular) |
| Construction | Anodized Aluminum Alloy |
| Kinematic Design | Three-Point Contact with Locking Knobs |
| Angular Range | ±4° per axis (typical) |
| Repeatability | < 5 arcsec |
| Load Capacity | ≤ 300 g |
| Compatibility | Standard Ø50 mm optics (1" diameter), thickness 3–12 mm |
| Surface Finish | Hard-anodized, non-reflective black |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Model | HTMM50-OS |
| Material | 304 Stainless Steel |
| Mounting Aperture | 50 mm |
| Adjustment Range | ±2° (Pitch & Yaw) |
| Resolution | <15 arcsec per division |
| Repeatability | ±10 arcsec |
| Load Capacity | ≤1.2 kg |
| Thread Standard | M6 (base), SM1 (mirror retention) |
| Compliance | ISO 9001-certified manufacturing process |
| Regulatory Context | Designed for integration into ISO/IEC 17025-compliant optical test benches |
| Brand | Han Ding (HT) |
|---|---|
| Model | HTMR13-NS |
| Travel Range | 13 mm |
| Drive Type | Right-side micrometer head |
| Guide Mechanism | Precision linear ball bearing rail |
| Actuation Options | Compatible with fine-pitch screw, differential micrometer, or standard micrometer head |
| Positioning Repeatability | ≤ ±1 µm (typical, under controlled lab conditions) |
| Platform Mounting Pattern | Standard 25 mm grid of M4 threaded holes |
| Construction | Anodized aluminum alloy body with hardened stainless steel components |
| Load Capacity | 5 kg (horizontal, static) |
| Backlash Compensation | Integrated spring-preloaded mechanism |
| Brand | Han Ding / HT |
|---|---|
| Origin | Jiangsu, China |
| Model | HTMR25-NS |
| Travel Range | 25 mm |
| Drive Type | Right-side micrometer head |
| Guide Mechanism | Precision linear ball bearing rail |
| Preload & Backlash Compensation | Spring-loaded anti-backlash mechanism |
| Mounting Pattern | Standard ISO/Metric tapped hole array (e.g., M4 or 1/4"-20) |
| Drive Compatibility | Fine-pitch lead screw, standard micrometer head, differential micrometer head |
| Product Category | Manual Translation Stage |
| Brand | HanDing (HT) |
|---|---|
| Origin | Jiangsu, China |
| Model | HTRH75R |
| Mounting Type | Magnetic Base Optical Post Holder |
| Rod Length | 75 mm |
| Rotation Range | 360° Continuous Around Rod Axis |
| Bearing Type | Precision Ball Bearing |
| Locking Mechanism | Dual-lock (Rod Clamp + Rotation Lock) |
| Compliance | ISO 9001–Certified Manufacturing Process |
| Material | Anodized Aluminum Alloy (6061-T6) |
| Weight | ~180 g |
| Max Load Capacity | 2.5 kg (Static, Centered Load) |
| Brand | HT (Handing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | HTSB-B |
| Pricing | Upon Request |
| Brand | HT (Handing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTSB-C |
| Pricing | Available Upon Request |
| Brand | HT (Handing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTSB-D |
| Pricing | Available Upon Request |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTSB-E |
| Pricing | Available Upon Request |
| Brand | HT (Handing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | HTSB-F |
| Pricing | Available Upon Request |
| Brand | HT (Handing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTSB-G |
| Pricing | Available Upon Request |
| Brand | Han Ding / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTSL25-X |
| Product Category | Manual Translation Stage |
| Drive Side | Left |
| Travel Range | 25 mm |
| Actuation | Precision Micrometer Head |
| Guidance | Linear Ball Bearing Rails |
| Repeatability | ≤ ±1 µm (typical for class-compliant manual stages) |
| Mounting Pattern | Standard M4/M6 Tapped Holes on Top and Base Plates |
| Preload Mechanism | Dual-Spring Anti-Backlash Design |
| Brand | HT (Handing) |
|---|---|
| Model | HTSM-13 |
| Travel Range | 13 mm |
| Minimum Graduation | 0.01 mm |
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Pricing | Available Upon Request |
| Brand | HT (Handing) |
|---|---|
| Model | HTSM-25 |
| Travel Range | 25 mm |
| Minimum Graduation | 10 µm |
| Origin | Jiangsu, China |
| Distribution Type | Authorized Distributor |
| Compliance | ISO 9001–certified manufacturing process |
| Mounting Interface | Standard M4/M6 tapped holes (compatible with Thorlabs, Newport, and OptoSigma optical breadboards) |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Model | HTTS05-2A |
| Type | Manual Translation Stage |
| Axis Configuration | Dual-Axis (X-Y tilt) |
| Drive Mechanism | Precision Fine-Pitch Screw with Micrometer Head |
| Return Mechanism | Tension Spring Reset |
| Mounting Standard | ISO/Metric Thread Pattern (M4/M6 Grid) |
| Compliance | Designed for Laboratory Optical Alignment per ISO 10110-7 and ANSI/OEOSC OP1.002 |
| Brand | HanDing (HT) |
|---|---|
| Model | HTVH-01 |
| Adjustment Range | 70–85 mm |
| Mounting Base | Magnetic |
| Central Bore Diameter | 12.5 mm |
| Compatibility | HTR-series posts |
| Origin | Jiangsu, China |
| Distributor Type | Authorized Domestic Distributor |
| Compliance | Designed for ISO/IEC 17025-aligned optical laboratories |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Model | HTVH-02 |
| Adjustment Range | 90–120 mm |
| Mounting Hole Diameter | 12.5 mm |
| Base Type | Integrated Permanent Magnet Base |
| Compatibility | Designed for HTR-series posts |
| Locking Mechanism | Dual-lock (post clamp + height lock) |
| Material | Anodized aluminum alloy |
| Surface Finish | Black anodized, corrosion-resistant |
| Brand | TOP (Tianjin) |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | GY-7 |
| Light Source Type | Atomic Emission Hydrogen Lamp |
| Illumination Mode | External Illumination Configuration |
| Spectral Output | Primary Balmer Series Lines (Hα: 656.3 nm, Hβ: 486.1 nm, Hγ: 434.0 nm, Hδ: 410.2 nm) |
| Operating Voltage | 5–12 V DC (typical) |
| Filament/Discharge Type | Low-pressure DC gas discharge lamp |
| Lifetime | ≥ 1,000 hours (under rated operating conditions) |
| Cooling | Passive air-cooled housing |
| Mounting | Standard M27×1 or SMA-compatible optical flange |
| Brand | IdeaOptics |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | C-Mount |
| Component Type | Fiber Collimator |
| Fiber Interface | SMA905 |
| Microscope/Telescope Interface | Standard C-Mount |
| Optional Interfaces | Available for CS-Mount, F-Mount, T-Mount, and custom thread specifications upon request |
| Optical Function | Collimated coupling between optical fiber and C-mount imaging systems |
| Brand | IdeaOptics |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Optical Component |
| Model | CMS |
| Spectral Range | 200–2500 nm |
| Spatial Resolution (with FIB-M fiber) | ≤1 μm |
| Compatibility | Universal microscope mounting (custom interface provided) |
| Optical Functionality | Transmission/Reflection, Fluorescence, Raman spectroscopy |
| Beam Path Design | Dual-mode optical path (simultaneous imaging & spectral acquisition, micro-area light delivery) |
| Brand | IdeaOptics |
|---|---|
| Model | DPS |
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Optical Component |
| Mounting Compatibility | Standard Microscope Trinocular Port (C-Mount & RMS Adaptable) |
| Switching Precision | ±1 µm (repeatability at objective focal plane) |
| Port Configuration | Two independent parallel-beam output ports with in-situ mechanical indexing |
| Structural Framework | Stainless steel chassis with precision linear slide rails and kinematic mirror mounts |
| Customization Options | Interchangeable filter holders (25 mm, 32 mm), dichroic mount adapters, fiber-coupling interfaces (SMA905, FC/PC), cage system compatibility (30 mm rods) |
| Brand | IdeaOptics |
|---|---|
| Model | FIB |
| Type | Optical Fiber Bundle (Spectroscopy-Optimized) |
| Core Material | Synthetic Fused Silica |
| Wavelength Range | 190–2500 nm |
| Numerical Aperture | 0.22 (typ.) |
| Standard Bundle Diameter | 400 µm–1000 µm |
| Connector Options | SMA 905, FC/PC, Custom Terminations |
| Compliance | ISO 10110-3 (Surface Quality), ASTM E131 (Terminology for Molecular Spectroscopy) |
| Brand | IdeaOptics |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | FIBH |
| Component Category | Fiber Collimator |
| Interface | SMA905 (also compatible with FC) |
| Beam Divergence | ≤2° |
| Optical Compatibility | Designed for single-mode and multimode fiber coupling in laboratory and industrial optical systems |
| Brand | IdeaOptics |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | fProbe |
| Component Category | Optical Component |
| Laser Rejection Ratio | OD6 (10⁶) |
| Compatibility | K-Sens & Kun Series Raman Spectrometers |
| Construction | Monolithic CNC-Machined Tip with Polyimide/Metal Mesh Reinforced Jacket |
| Customization | Available for Multiple Excitation Wavelengths (e.g., 532 nm, 785 nm, 830 nm) and Field-Deployable Configurations |
| Brand | IdeaOptics |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Optical Component |
| Model | FVA-UV |
| Wavelength Range | 200–2000 nm |
| Attenuation Range | 0–100% (continuous) |
| Connector Type | SMA905 |
| Operating Principle | Mechanical slit-based intensity control |
| Brand | IdeaOptics |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Domestic (China) |
| Model | HL100 |
| Pricing | Available Upon Request |