Optical Laboratory Equipment
Filter
Showing 661–690 of 1780 results
| Brand | Hitachi |
|---|---|
| Origin | Japan |
| Lamp Type | Xenon Arc Lamp |
| Power Rating | 150 W |
| Lifetime | ≥1,000 hours |
| Compatible Models | F-4500, F-2700, F-4600, F-7000 |
| Mounting Configuration | Internal Illumination (In-Spectrometer Housing) |
| Part Number | 250-1600 |
| Import Status | Genuine Imported Component |
| Key | Brand: ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Optical Component |
| Model | RCCB Series |
| Wavelength Range | UV to NIR (190–1100 nm) |
| Reflective Coating | Unprotected Aluminum |
| Single-Surface Reflectivity | 85% ± 5% |
| Triple-Pass Return Efficiency | ~61% ± 3% |
| Angular Tolerance | < 2 arcsec (typical alignment precision) |
| Construction | Monolithic air-spaced trihedral assembly |
| Surface Finish | λ/10 rms (per mirror face) |
| Clear Aperture | ≥ 90% of nominal diameter |
| Mounting | Kinematic or kinematic-compatible base optional |
| Brand | Holoeye |
|---|---|
| Origin | Germany |
| Model | ERIS |
| Pixel Resolution | 1920 × 1200 |
| Pixel Pitch | 8 µm |
| Wavelength Range | 400–1600 nm |
| Phase Depth | 0–2π (adjustable) |
| Phase Quantization | 8-bit standard, up to 10-bit supported |
| Interface | HDMI (phase pattern input), USB (driver control & gamma/dynamic range calibration) |
| Trigger Output | TTL-sync enabled |
| Display Technology | 0.717″ LCOS microdisplay |
| Operating Mode | Plug-and-play, extended desktop mode compatible |
| Brand | Holoeye |
|---|---|
| Origin | Germany |
| Model | GAEA-2 |
| Pixel Resolution | 4094 × 2464 |
| Pixel Pitch | 3.74 µm |
| Operating Wavelength Ranges | Visible (e.g., 532 nm), Near-Infrared (e.g., 1064 nm), Telecom C-band (1550 nm) |
| Diffraction Efficiency | up to 79% (visible), up to 75% (C-band) |
| Component Type | Liquid-Crystal-on-Silicon (LCoS) Optical Element |
| Brand | Holoeye |
|---|---|
| Origin | Germany |
| Model | LC 2012 |
| Display Resolution | 1024 × 768 pixels |
| Operating Wavelength Range | 450–800 nm |
| Maximum Phase Modulation | 2π @ 450 nm, 1.8π @ 532 nm, π @ 800 nm |
| Amplitude Modulation Capability | Yes |
| Contrast Ratio | 1000:1 @ 633 nm |
| Interface | HDMI (video input), USB (configuration & parameter control) |
| Form Factor | Integrated LCoS module with embedded driver electronics |
| Mounting | Standard optical cage system compatible (e.g., 30 mm or 60 mm rail mounts) |
| Brand | HOLOEYE |
|---|---|
| Origin | Germany |
| Model | LUNA+DPE+RGB |
| Liquid Crystal Type | Reflective Silicon-Based Liquid Crystal on Silicon (LCoS) |
| Resolution | 1920 × 1080 pixels |
| Pixel Pitch | 4.5 µm |
| Fill Factor | >91% |
| Maximum Spatial Resolution | 111 lp/mm |
| Addressing Depth | 8-bit |
| Signal Interface | DisplayPort (DP) |
| Input Frame Rate | 60 Hz |
| Active LC Area | 8.64 × 4.86 mm |
| Driver Electronics Dimensions | 44 × 85 × 23.5 mm |
| Response Time | ~20 ms |
| System Architecture | Integrated Diffractive Projection Engine (DPE) + RGB Multi-Wavelength Laser Source |
| Compliance | CE-marked, RoHS-compliant, ISO 9001-manufactured components |
| Brand | Holoeye |
|---|---|
| Origin | Germany |
| Model | PLUTO-2.1-TELCO-142 |
| Resolution | 1920 × 1080 pixels |
| Pixel Pitch | 8 µm |
| Interface | HDMI/DisplayPort (Green Channel 8-bit addressing) |
| Driver Connection | USB 2.0 for Voltage Calibration and Gamma Adjustment |
| Brand | Holoeye |
|---|---|
| Origin | Germany |
| Model | PLUTO-2.1-VIS-014 |
| Resolution | 1920 × 1080 pixels |
| Pixel Pitch | 8 µm |
| Wavelength Range | Visible (VIS), optimized for ~400–700 nm |
| Interface | USB-controlled gamma/dynamic range calibration + HDMI/DisplayPort video input |
| Bit Depth | 8-bit grayscale addressing (via green channel) |
| Hot-Swappable Operation | Yes |
| Compliance | CE, RoHS |
| Brand | Holoeye |
|---|---|
| Origin | Germany |
| Model | TMS |
| Component Category | Optical Element |
| Cooling Types | TMS001 (Passive Heat Sink), TMS002 (Active Water-Cooled System) |
| Operating Temperature Range (TMS001) | 30–35 °C |
| Interface | Native Integration with PLUTO-2 and GAEA-2 Controller Software |
| Compliance | Designed for ISO/IEC 17025-aligned optical laboratories |
| Brand | Lumi-Universe |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | Honghu |
| Light Source Type | High-Harmonic Generation (HHG) Laser Source |
| Illumination Mode | Internal Illumination |
| Wavelength Range | 1–10 nm |
| Output Harmonic Energy | 1 nW – 1 µW |
| Pulse Duration | < 1 fs |
| Repetition Rate | 1–10 kHz |
| Dimensions | 855 mm × 420 mm × 233 mm |
| Weight | 55 kg |
| Brand | HORIBA |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DeltaDiode |
| Component Category | Pulsed Light Source |
| Wavelength Range | 250–980 nm |
| Pulse Width | <70 ps (typ.) |
| Repetition Rate | Up to 100 MHz (laser) |
| Output Modes | Pulsed (TCSPC-optimized), CW (select wavelengths) |
| Synchronization | NIM/TTL output with adjustable nanosecond delay |
| Triggering | External TTL/NIM trigger input |
| Gating | Fast/slow gate inputs |
| Control Interface | LCD front panel + USB (PC) |
| Adjustable Parameters | Output power, repetition rate, cooling temperature, pulse frequency |
| Compliance | Designed for GLP/GMP-aligned fluorescence lifetime instrumentation |
| Brand | Ushio |
|---|---|
| Origin | Japan |
| Model | U-150W |
| Light Source Type | Xenon Lamp |
| Illumination Mode | Internal Illumination |
| OEM Compatibility | Horiba JY FluoroMax-4 |
| Brand | HT |
|---|---|
| Model | HTLB90-02 |
| Origin | Jilin, China |
| Mounting Configuration | Orthogonal Dual-Surface Rigid Block |
| Surface Perpendicularity | Precision-Machined to ≤ 15 arcsec Deviation |
| Mounting Hole Pattern | Standard M4 and 1/4"-20 Tapped Holes on Both Faces |
| Material | Anodized 6061-T6 Aluminum Alloy |
| Weight | ~185 g |
| Compatibility | Integrates with Standard 30 mm and 50 mm Cage Systems, Linear Stages, and Kinematic Mounts |
| Brand | HT |
|---|---|
| Model | HTML13-NS |
| Travel Range | 13 mm |
| Drive Type | Left-Side Mounted Micrometer Head |
| Guide Mechanism | Precision Linear Ball Bearing Rails |
| Mounting Pattern | Standard ISO/Metric Tapped Holes (e.g., M4 or M6, center-to-center spacing per industry convention) |
| Repeatability | ≤ ±1.5 µm (typical for calibrated micrometer-driven stages) |
| Load Capacity | ≤ 5 kg (horizontal, static) |
| Construction | Anodized Aluminum Alloy Base and Platform |
| Compliance | Designed to meet mechanical stability requirements for optical alignment in ISO 10110-compliant labs |
| Brand | HT |
|---|---|
| Travel Range | 25 mm |
| Drive Type | Left-Side Micrometer Head |
| Guide Mechanism | Precision Linear Ball Bearing Rails |
| Repeatability | ≤ ±1 µm (typ.) |
| Platform Mounting Pattern | Standard M6/M4 Grid (25 mm Pitch) |
| Construction | Anodized Aluminum Alloy Body with Stainless Steel Lead Screw |
| Compliance | ISO 9001 Manufacturing Process |
| Origin | Jiangsu, China |
| Product Category | Manual Optical Translation Stage |
| Brand | HT |
|---|---|
| Model | HTPM25 |
| Type | Precision Optical Prism Mount |
| Adjustment Axes | 2× Angular (Pitch/Yaw), 1× Linear (Vertical Height) |
| Drive Mechanism | 1/4"-100 Fine-Pitch Stainless Steel Micrometer Screws |
| Return Mechanism | Dual Pre-Loaded Tension Springs |
| Construction | Anodized Aluminum Alloy (6061-T6) |
| Compatibility | Prisms up to 25 mm aperture (customizable base plate interface) |
| Compliance | Designed for ISO 10110 optical mounting standards and GLP-aligned lab environments |
| Brand | HT (Handing) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTPZ-F |
| Pricing | Available Upon Request |
| Brand | HT |
|---|---|
| Model | HTRH100R |
| Rod Length | 100 mm |
| Mounting Base | Magnetic |
| Rotation Range | 360° about Rod Axis |
| Bearing Type | Precision Ball Bearing |
| Construction | Aluminum Alloy with Black Anodized Finish |
| Locking Mechanism | Dual Independent Knob Locks (Rod & Rotation Stage) |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows |
| Brand | HT |
|---|---|
| Model | HTRH50R |
| Rod Length | 50 mm |
| Origin | Jiangsu, China |
| Distribution Type | Authorized Distributor |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | HTAC-PS-03 |
| Weight | 0.04 kg |
| Bore Diameter | 12.5 mm |
| Orthogonal Mounting Holes | Two, mutually perpendicular |
| Brand | Han Ding (HT) |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | HTAC-PS-04 |
| Bore Diameter | 12.5 mm |
| Rotation | ±180° continuous (360° relative between two mounting holes) |
| Mass | 0.01 kg |
| Material | Anodized aluminum alloy (6061-T6) |
| Surface Finish | Black anodized, non-reflective |
| Mounting Thread | M6 × 0.75 (standard for optical posts and breadboards) |
| Compatibility | Accepts Ø12.5 mm optical posts, rods, and kinematic pins |
| Key | Brand: HT (Handing) |
|---|---|
| Model | HTAC-RC-01 |
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (PRC) |
| Pricing | Available Upon Request |
| Brand | HT / Han Ding |
|---|---|
| Origin | Jiangsu, China |
| Model | HTAS100-13-N |
| Thread Specification | 1/4"-100 UNC (Pitch: 0.254 mm) |
| Material | Stainless Steel Shaft with Hardened Brass Nut |
| Locking Mechanism | Integrated Locking Collar |
| Compatibility | Standard Newport-compatible Mounting Interface (M4 & 8-32 Tapped Holes) |
| Optional | Knurled Metal Handwheel |
| Drive Tip | Ball-Tipped Sliding Contact Design |
| Brand | Han Ding / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTAS80-13-N |
| Pitch | 0.318 mm (equivalent to 1/4"-80 UNC) |
| Thread Standard | Imperial Fine Thread (1/4"-80 UNC) |
| Nut Material | Bronze |
| Drive Mechanism | Ball-Tipped Sliding Contact |
| Compatibility | Newport-compatible mounting interface (standard optical mount footprint) |
| Optional Feature | Knurled Metal Knob (detachable) |
| Brand | HanDing / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTCL25-X |
| Product Category | Manual Translation Stage |
| Travel Range | 25 mm |
| Drive Mechanism | Precision Differential Micrometer (Center-Mounted) |
| Guidance System | Linear Ball Bearing Rails |
| Backlash Compensation | Spring-Loaded Preload |
| Mounting Pattern | Standard ISO/Metric Tapped Holes on Top and Base Plates |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows |
| Brand | Han Ding / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTDL100-X |
| Travel Range | 100 mm |
| Drive Mechanism | Precision Ground Lead Screw |
| Guide Type | Dual Dove-Tail Rails |
| Mounting Pattern | Standard ISO/Metric Tapped Holes (M4/M6) on Top and Base Plates |
| Orientation Flexibility | Compatible with Right-Angle Brackets for Vertical or Multi-Axis Assembly |
| Product Category | Manual Optical Translation Stage |
| Compliance | Designed for Laboratory-Grade Optical Alignment in Accordance with ISO 10110-7 (Optical Component Mounting Tolerances) and Compatible with Common Optical Table Grid Standards (e.g., M6 × 25 mm Pitch) |
| Brand | Han Ding (HT) |
|---|---|
| Model | HTDL50-X |
| Travel | 50 mm |
| Rail Type | Dual Dove-Tail |
| Drive Mechanism | Precision Ground Lead Screw (Pitch: 0.254 mm) |
| Top Plate Dimensions | 100 × 62 mm |
| Central Load Capacity | 6 kg |
| Product Category | Manual Translation Stage |
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Brand | HT (Handing) |
|---|---|
| Model | HTDM-13 |
| Total Travel | 13 mm |
| Fine Adjustment Range | 0.2 mm |
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Compliance | ISO 9001–certified supply chain |
| Mounting Interface | Standard M6 and SM1 (1.035"-40) compatible |
| Brand | Han Ding / HT |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (China) |
| Model | HTFM-U |
| Pricing | Upon Request |
| Brand | HT (Handing) |
|---|---|
| Model | HTFPS301R |
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Pricing | Available Upon Request |