Physical Property Testing Instruments
Filter
Showing 5881–5910 of 12518 results
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RCP |
| Temperature Range | −70 °C to +150 °C |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ±2.0 °C |
| Temperature Uniformity | ±2.0 °C |
| Heating Rate | 3.0–3.5 °C/min |
| Cooling Rate | 1.2 °C/min |
| Working Chamber Dimensions | 800 × 950 × 800 mm (W × H × D) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Model | RP-80 |
| Temperature Range | -20°C to +150°C (optional: -40°C / -60°C / -80°C to +150°C) |
| Humidity Range | 30–98% RH |
| Temperature Uniformity | ≤ ±2.0°C |
| Temperature Fluctuation | ≤ ±0.5°C |
| Humidity Deviation | +2 / -3% RH |
| Heating Rate | -20°C → 100°C in ≈35 min |
| Cooling Rate | 25°C → -40°C in ≈50 min |
| Control Accuracy | ±0.1°C (temp), ±1% RH (humidity) |
| Display | 5.7″ Korean imported touchscreen controller with bilingual (EN/CN) interface |
| Programmable Capacity | 100 programs × 1000 segments × 999 cycles |
| Communication Interface | RS-232 / RS-485 |
| Refrigeration System | French “TECO” hermetic compressor |
| Humidification | Stainless steel surface evaporation type, external isolation structure |
| Dehumidification | Evaporator coil dew-point contact method |
| Air Circulation | Low-noise AC motor + multi-blade centrifugal impeller |
| Inner Chamber Material | SUS304 stainless steel mirror finish |
| Outer Chamber Material | Cold-rolled steel with phosphating & electrostatic powder coating or optional SUS304 brushed finish |
| Insulation | Rigid polyurethane foam + ultra-fine glass fiber |
| Compliance | GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.3–1993, GB/T 2423.4–1993 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | RP-80U |
| Quotation | Upon Request |
| Temperature Range | -60°C to +150°C |
| Humidity Range | 10%–98% RH (optional dehumidification to ≤5% RH) |
| Internal Dimensions (W×H×D) | 400×500×400 mm |
| Temperature Uniformity | ≤±2.0°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Heating Rate | -60°C → +150°C ≤ 60 min |
| Cooling Rate | +20°C → -60°C ≤ 75 min |
| Refrigeration System | Hermetic French Tecumseh Compressor |
| Refrigerant | HFC-based Eco-friendly Refrigerant |
| Control Interface | Programmable Touchscreen Controller with USB Data Logging |
| Communication | RS-232 / RS-485 (SCADA-compatible) |
| Construction | SUS304 Stainless Steel Interior & Exterior |
| Insulation | High-density Polyurethane Foam + Glass Fiber |
| Humidification | UL-shaped Stainless Steel Steam Generator |
| Air Circulation | Centrifugal Blower with Optimized Vane Design |
| Safety | Dual-stage Over-Temperature & Over-Humidity Protection, Auto-Cut-off Circuit |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | RP-80U |
| Temperature Range | –60°C to +150°C |
| Humidity Range | 10–98% RH (optional dehumidification to ≤5% RH) |
| Internal Dimensions (W×H×D) | 400×500×400 mm |
| Temperature Uniformity | ≤±2.0°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Heating Rate | –60°C → +150°C ≤ 60 min |
| Cooling Rate | +20°C → –60°C ≤ 75 min |
| Refrigerant | HFC-based eco-friendly refrigerant |
| Compressor | Imported hermetic reciprocating compressor (Tecumseh/France) |
| Control System | BTHC (Balanced Temperature & Humidity Control) |
| Data Storage | USB interface with real-time logging |
| Communication | RS-232/RS-485, SCADA-compatible |
| Construction | SUS304 stainless steel interior & exterior |
| Insulation | High-density polyurethane foam + fiberglass |
| Viewing Window | Heated embedded glass, fog-free |
| Water Supply | Front-mounted 18 L reservoir with auto-refill interface |
| Safety | Dual-stage over-temperature/humidity cut-off, leakage detection, circuit isolation |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RP-80U |
| Temperature Range | -60°C to +150°C |
| Humidity Range | 10–98% RH (down to ≤5% RH with optional dehumidification unit) |
| Internal Dimensions (W×H×D) | 400×500×400 mm |
| Temperature Uniformity | ≤±2.0°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Heating Rate | -60°C → +150°C ≤ 60 min |
| Cooling Rate | +20°C → -60°C ≤ 75 min |
| Refrigeration System | Hermetic French Tecumseh Compressor |
| Refrigerant | HFC-based eco-friendly refrigerant |
| Power Supply | 3-phase 380 VAC ±10%, 50/60 Hz |
| Control Interface | Programmable touchscreen controller with USB data export |
| Communication | RS-232 / RS-485 (SCADA-compatible) |
| Construction | SUS304 stainless steel interior & exterior |
| Insulation | High-density polyurethane foam + glass fiber |
| Humidification | UL-shaped stainless steel electric steam generator |
| Air Circulation | Centrifugal blower with optimized duct design |
| Safety | Dual-loop over-temperature/over-humidity protection, automatic power cutoff, door interlock |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RP-80U |
| Pricing | Upon Request |
| Temperature Range | –60°C to +150°C |
| Humidity Range | 10–98% RH (optional dehumidification to ≤5% RH) |
| Internal Dimensions (W×H×D) | 400×500×400 mm |
| Temperature Uniformity | ≤±2.0°C |
| Humidity Uniformity | ±2.5% RH |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | –60°C → +150°C ≤ 60 min |
| Cooling Rate | +20°C → –60°C ≤ 75 min |
| Refrigeration System | Hermetic French Tecumseh Compressor |
| Refrigerant | HFC-based Eco-friendly Refrigerant |
| Control System | BTHC Balanced Temperature & Humidity Control |
| Data Storage | USB Interface |
| Communication | RS-232 / RS-485 (SCADA-compatible) |
| Construction | SUS304 Stainless Steel Interior & Exterior |
| Insulation | High-density Polyurethane Foam + Glass Fiber |
| Viewing Window | Heated Embedded Glass |
| Water Tank Capacity | ~18 L |
| Safety | Multi-point Auto-Cut-off Protection, Circuit Isolation for Humidification System |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RP-80U |
| Temperature Range | –60°C to +150°C |
| Humidity Range | 10–98% RH (down to ≤5% RH with optional dehumidification system) |
| Internal Dimensions (W×H×D) | 400×500×400 mm |
| Temperature Uniformity | ≤±2.0°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Heating Rate | –60°C → +150°C ≤ 60 min |
| Cooling Rate | +20°C → –60°C ≤ 75 min |
| Refrigeration System | Hermetic French Tecumseh Compressor |
| Refrigerant | HFC-based eco-friendly refrigerant |
| Control Interface | Programmable BTHC (Balanced Temperature & Humidity Control) system with USB data logging |
| Compliance | Designed for GLP/GMP-aligned laboratory environments |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (OEM/ODM Producer) |
| Model | RZ-80 |
| Temperature Range | −20°C to +150°C |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | −20°C to 100°C in ≈35 min |
| Cooling Rate | +20°C to −20°C in ≈45 min |
| Humidity Range | 30–95% RH |
| Humidity Fluctuation | ±2.5% RH |
| Humidity Accuracy | ±3% RH (>50% RH), ±5% RH (≤50% RH) |
| Internal Dimensions (W×H×D) | 40×50×40 cm |
| External Dimensions (W×H×D) | 94×86×83 cm |
| Construction | SUS#304 Stainless Steel Interior & Exterior |
| Insulation | Rigid Polyurethane Foam |
| Refrigeration | Hermetic Compressor (Imported from EU/US), Eco-friendly Refrigerant (R134a or equivalent) |
| Control System | Korean-Made PID-Based Programmable Controller with LCD Interface, LAN Optional |
| Sensor | PT100 Platinum Resistance Thermometer |
| Compliance | Designed per IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-78, and ASTM D4332 (Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing) |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RZ-80 |
| Pricing | Available Upon Request |
| Temperature Range | -20°C to +150°C |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | -20°C to 100°C in ~35 min |
| Cooling Rate | +20°C to -20°C in ~45 min |
| Humidity Range | 30–95% RH |
| Humidity Fluctuation | ±2.5% RH |
| Humidity Accuracy | ±3% RH (>50% RH), ±5% RH (≤50% RH) |
| Internal Dimensions (W×H×D) | 40×50×40 cm |
| External Dimensions (W×H×D) | 94×86×83 cm |
| Inner Chamber Material | SUS#304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam |
| Refrigeration System | Hermetic Compressor (Imported from Europe/America), Eco-friendly Refrigerant |
| Control System | Korean-Made PID-Based Programmable Controller with LCD Interface, LAN Optional |
| Sensor | PT100 Platinum Resistance Thermometer |
| Display Resolution | 0.1°C / 1% RH |
| Compliance | Designed for ISO/IEC 17025-aligned environmental testing workflows, supports GLP/GMP documentation readiness |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | RZ-80 |
| Temperature Range | -20°C to +150°C |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Range | 30–95% RH |
| Humidity Fluctuation | ±2.5% RH |
| Humidity Accuracy | ±3% RH (>50% RH), ±5% RH (≤50% RH) |
| Internal Dimensions (W×H×D) | 40×50×40 cm |
| External Dimensions (W×H×D) | 94×86×83 cm |
| Heating System | Finned-tube stainless steel heater |
| Humidification System | U-shaped immersion heater |
| Refrigeration System | Hermetic compressor with eco-friendly refrigerant (R134a or equivalent) |
| Control System | Korean-made PID-based programmable controller with LCD interface, LAN optional |
| Safety Features | Over-temperature protection, compressor high-pressure cutoff, power failure memory, auto-diagnostic function |
| Construction | SUS#304 stainless steel interior and exterior, rigid polyurethane foam insulation |
| Air Circulation | Long-shaft 90W stainless steel motor with multi-blade impeller |
| Viewing Window | Double-layer vacuum-insulated window (210×270×35 mm) |
| Lighting | 13W LED viewing lamp |
| Brand | LabCompanion |
|---|---|
| Model | RZ-80 |
| Temperature Range | −20 to 100 °C |
| Humidity Range | 30–95% RH |
| Internal Dimensions (W×H×D) | 400 × 500 × 400 mm |
| External Dimensions (W×H×D) | 970 × 800 × 650 mm |
| Temperature Resolution | 0.1 °C |
| Humidity Resolution | 0.1% RH |
| Temperature Control Accuracy | ±0.3 °C |
| Humidity Control Accuracy | ±3% RH |
| Temperature Uniformity | ±1 °C |
| Humidity Uniformity | ±3% RH |
| Heating Time (30→100 °C) | Approx. 15–20 min |
| Cooling Time (40→0 °C) | Approx. 12–15 min |
| Cooling Time (40→−20 °C) | Approx. 25–30 min |
| Air Circulation | Optimized vertical laminar flow with dual axial fans |
| Safety Features | Over-temperature, over-humidity, compressor overload, phase failure, and power-loss memory protection |
| Compliance | Designed per IEC 60068-2 series, supports GLP/GMP-aligned validation protocols |
| Brand | LabCompanion |
|---|---|
| Model | RZ-80 |
| Temperature Range | -20 to 100°C |
| Humidity Range | 30–95% RH |
| Internal Dimensions (W×H×D) | 40×50×40 cm |
| External Dimensions (W×H×D) | 97×80×65 cm |
| Temperature Resolution | 0.1°C |
| Humidity Resolution | 0.1% RH |
| Temperature Control Accuracy | ±0.3°C |
| Humidity Control Accuracy | ±3% RH |
| Temperature Uniformity | ±1°C |
| Humidity Uniformity | ±3% RH |
| Heating Rate | ~30 min (30°C to 100°C) |
| Cooling Rate | ~40 min (40°C to 0°C), ~60 min (40°C to −20°C) |
| Safety Features | Comprehensive Over-Temp/Over-Humidity Protection, Power-Fail Memory, Interlock Switches |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | RZ-80 |
| Temperature Range | −20 to 100 °C |
| Humidity Range | 30–95% RH |
| Internal Dimensions (W×H×D) | 40×50×40 cm |
| External Dimensions (W×H×D) | 97×80×65 cm |
| Temperature Resolution | 0.1 °C |
| Humidity Resolution | 0.1% RH |
| Temperature Control Accuracy | ±0.3 °C |
| Humidity Control Accuracy | ±3% RH |
| Temperature Uniformity | ±1 °C |
| Humidity Uniformity | ±3% RH |
| Heating Rate | ~30 min (from 30 °C to 100 °C) |
| Cooling Rate | ~40 min (from 40 °C to 0 °C), ~60 min (from 60 °C to −20 °C) |
| Cabinet Design | Stackable Desktop Configuration |
| Air Circulation | Optimized Baffled Airflow System |
| Safety Features | Comprehensive Over-Temperature, Over-Humidity, and Power-Failure Memory Protection |
| Expandability | Compatible with BIAS data acquisition modules and external chart recorders |
| Timing Output | Dry-contact timing relay for synchronized dynamic testing |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | RZ-80 |
| Temperature Range | -20 to 100°C |
| Humidity Range | 30–95% RH |
| Internal Dimensions (W×H×D) | 40×50×40 cm |
| External Dimensions (W×H×D) | 97×80×65 cm |
| Temperature Resolution | 0.1°C |
| Humidity Resolution | 0.1% RH |
| Temperature Control Accuracy | ±0.3°C |
| Humidity Control Accuracy | ±3% RH |
| Temperature Uniformity | ±1°C |
| Humidity Uniformity | ±3% RH |
| Heating Time | ~30 min (30→100°C) |
| Cooling Time | ~40 min (40→0°C), ~60 min (40→−20°C) |
| Air Circulation | Optimized Horizontal Forced-Air System with Dual-Independent Humidity/Temperature Pathways |
| Safety Features | Over-Temperature, Over-Humidity, Compressor Overload, Phase Failure, and Power-Fail Memory Protection |
| Expandability | Compatible with BIAS data acquisition modules and external chart recorders |
| Timing Relay Output | Yes, for synchronized dynamic testing |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | RZ-80 |
| Pricing | Available Upon Request |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | RZ-80 |
| Temperature Range | −20 °C to +150 °C |
| Humidity Range | 20–98 %RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Uniformity | ±2 %RH (≥75 %RH) |
| Heating Rate | −20 °C to +100 °C in ~80 min |
| Cooling Rate | +20 °C to −20 °C in ~50 min |
| Internal Dimensions (W×H×D) | 500×600×500 mm |
| Controller | Q8-901 Color Touchscreen PLC-Based Programmable Controller (Bilingual English/Chinese Interface) |
| Compliance | GB 10586-89, GB 10592-89, IEC 60068-2-3, IEC 60068-2-1, IEC 60068-2-2, MIL-STD-810F, JIS C60068-2, JESD22-A101-B, GB/T 2423.1–2423.4, GJB 150.9 |
| Brand | LabCompanion |
|---|---|
| Model | SA-45 / SA-60 |
| Temperature Range | RT to +200°C (SA-45) / RT to +300°C (SA-60) |
| Uniformity | ±0.5°C |
| Control Accuracy | ±0.3°C |
| Air Exchange Rate | 1–200 times/hour (selectable) |
| Turntable Speed | 8–10 rpm |
| Internal Dimensions (W×H×D) | 450×450×450 mm (SA-45) / 600×600×600 mm (SA-60) |
| Power Supply | 220 V, single-phase, 5 kW (SA-45) / 7 kW (SA-60) |
| Compliance Standards | ASTM D2436, D573 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM Manufacturer |
| Model | SC-1000 |
| Sand Composition | 97–99% SiO₂ (silicon dioxide) |
| Sand Blowing Concentration | 1.1 g/m³ ±0.25 g/m³ to 2.2 g/m³ ±0.5 g/m³ |
| Sand Blowing Velocity | Adjustable from 1–10 m/s |
| Dust Concentration Control | 0.1–10.6 g/m³ ±7% with real-time monitoring and automatic dust replenishment |
| Internal Chamber Dimensions | 1000 × 1000 × 1000 mm (W×H×D) |
| External Dimensions | 1550 × 1800 × 1400 mm (W×H×D) |
| Power Supply | AC 380 V ±10%, 50 Hz |
| Total Power Consumption | 5 kW |
| Operating Ambient Temperature | −15 °C to +50 °C |
| Relative Humidity Range | 10–80% RH (at 20 °C) |
| Altitude Limit | Up to 3000 m |
| Compliance Standards | IEC 60529:2001, IEC 60068-2-68 (Test La2), GB 2423.37–2006, GB 4208–2008, DIN 40050-9, JIS D 0207, ISO 20653, SAE J575e, GB 10485 |
| IP Rating Validation | IP5X and IP6X |
| Dust Sieve Specifications | Wire diameter 50 µm, nominal mesh spacing 75 µm |
| Talcum Powder Loading | 2–4 kg/m³ |
| Test Duration Range | 0–99 h 59 min (programmable) |
| Data Logging | Battery-backed RAM storage ≥120 days (2-min sampling interval) |
| Interface | USB port for data export (CSV/Excel-compatible), PC software for test programming, curve visualization, and audit-trail-enabled reporting |
| Safety Features | Door interlock, over-temperature cut-off, phase-loss protection, leakage current protection, motor overload protection, vacuum system pressure monitoring, audible/visual fault alerts |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | Yes |
| Model | SC-800 |
| Sand Composition | 97–99% SiO₂ |
| Sand Blasting Concentration | 1.1 g/m³ ±0.25 g/m³ to 2.2 g/m³ ±0.5 g/m³ |
| Sand Blasting Velocity | 0–29 m/s |
| Dust Concentration | 0.1–10.6 g/m³ ±7 g/m³ |
| Dust Velocity | 8.9 m/s ±1.2 m/s |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SH-60C / SH-90C / SH-120C / SH-160C / SH-200C |
| Spray Mode | Continuous Atomization |
| Spray Rate | 1.0–2.0 mL/80 cm²/h (averaged over ≥16 h collection period) |
| Nozzle Pressure | 0.7–1.0 kgf/cm² |
| Fog Removal Method | Pneumatic Air-Compression Exhaust |
| Test Chamber Temp. | 35 °C ±1 °C (NSS) / 50 °C ±1 °C (CASS) |
| Saturated Air Chamber Temp. | 47 °C ±1 °C (NSS) / 63 °C ±1 °C (CASS) |
| Salt Solution Temp. | 35 °C ±1 °C (NSS) / 50 °C ±1 °C (CASS) |
| Chamber Volume | 108–1440 L |
| Salt Solution Tank Capacity | 15–40 L |
| NaCl Concentration | 5.0 wt% (NSS) or 5.0 wt% NaCl + 0.26 g/L CuCl₂·2H₂O (CASS) |
| Compressed Air Pressure | 1.00 ±0.01 kgf/cm² |
| Relative Humidity in Chamber | ≥85% RH |
| pH of Salt Solution | 6.5–7.2 (NSS) / 3.0–3.2 (CASS) |
| Power Supply | AC 220 V, 1-phase, 10–30 A (model-dependent) |
| Compliance | GB/T 2423.17, GB/T 2423.18, GB/T 10125, ASTM B117, JIS H8502, IEC 60068-2-11, CNS 4158/4159, GB/T 12967.3 |
| Brand | LabCompanion |
|---|---|
| Model | SH Series |
| Type | Environmental Test Chamber |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (Guangdong Hongzhan Instrument Co., Ltd.) |
| Compliance | GB/T 10586–1989, GB/T 2423.3–1993 (IEC 60068-2-3) |
| Temperature Range | R.T.+10 to 100 °C |
| Temp. Uniformity | ±2 °C |
| Temp. Fluctuation | ±0.5 °C |
| Humidity Range | 60–98% RH |
| Humidity Deviation | ±2 / −3% RH |
| Interior Dimensions (mm) | 400×450×650 / 500×550×700 / 700×800×900 |
| Interior Volume | ~100 L / ~200 L / ~500 L |
| Power Supply | 220 V, 50 Hz |
| Heating System | Ni-Cr Alloy Wire Heater |
| Humidification | Stainless Steel Sheathed Surface Evaporation Heater |
| Insulation | High-Density Polyurethane Foam + Glass Wool |
| Controller | Microcomputer-Based Fuzzy Logic PID Control with PT100 Sensors |
| Safety Protections | Dry-run protection for humidifier, independent overtemperature cutoff, low-water level detection, compressor overload/overcurrent protection, high-pressure refrigerant switch, circuit breaker, and earth leakage protection |
| Brand | LabCompanion |
|---|---|
| Model | SH Series |
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Application | Corrosion Resistance Testing of Coated & Surface-Treated Materials |
| Compliance | ASTM B117, ISO 9227 (formerly ISO 3768/3769/3770), JIS Z 2371, JIS D 0201, K 5400, HB 8610 |
| Chamber Volume | 480 L / 270 L / 108 L (SH-120 / SH-90 / SH-60) |
| Test Temperature | 35 °C ±1 °C (Neutral Salt Spray) or 50 °C ±1 °C (Acidified Salt Spray) |
| Saturated Air Temperature | 47 °C ±1 °C or 63 °C ±1 °C |
| pH Range | 6.5–7.2 (NSS) or 3.0–3.2 (ASS/CASS) |
| NaCl Solution Concentration | 5.0 wt% ±0.1 wt% |
| Fog Deposition Rate | 1.0–2.0 mL/h/80 cm² |
| Relative Humidity in Chamber | >85% RH |
| Salt Solution Reservoir Capacity | 40 L / 25 L / 15 L |
| Power Supply | AC 220 V, 1-phase, 20 A / 15 A / 10 A |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SH-60 / SH-90 / SH-110 / SH-130 / SH-160 / SH-200 |
| Temperature Range | RT + 10 °C to 55 °C |
| Test Temperatures | 35 °C ± 1 °C (NSS), 50 °C ± 1 °C (CASS) |
| Temp. Uniformity | ±2 °C |
| Temp. Stability | ±0.5 °C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Control Method | PID + PWM + SSR |
| Chamber Material | 8 mm PVC board with circumferential reinforcement |
| Saturated Air Tank | SUS#304 stainless steel |
| Heating Element | Stainless steel tubular heater |
| Viewing Window | Transparent acrylic lid |
| Drainage System | Front-mounted independent drainage ports |
| Safety Protection | Dual EGO + PT100 sensor, low-water cutoff, over-temp protection for chamber & saturator, over-current breaker |
| Fog Generation | Bernoulli-effect air-driven atomization |
| De-fogging System | Integrated post-test fog removal |
| Water Supply | Manual or auto-fill option |
| Compliance | ASTM B117, ISO 9227, JIS Z2371, CNS 4797, GB/T 2423.17 |
| Power Supply | 220 V / 380 V, 50 Hz |
| Volume Range | 100–1080 L |
| Brand | LabCompanion |
|---|---|
| Model | SH-60 / SH-90 / SH-110 / SH-130 / SH-160 / SH-200 |
| Origin | Guangdong, China |
| Manufacturer | LabCompanion (Guangdong Hongzhan Instrument Co., Ltd.) |
| Temperature Range | R.T. +10 °C to 55 °C |
| Test Temperatures | 35 °C ±1 °C (NSS), 50 °C ±1 °C (CASS) |
| Temp. Uniformity | ±2 °C |
| Temp. Stability | ±0.5 °C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Control Method | PID + PWM + SSR |
| Chamber Material | 8 mm PVC board with circumferential reinforcement |
| Saturated Air Tank | SUS#304 stainless steel |
| Heating Element | Stainless steel tubular heater |
| Chamber Cover | Transparent acrylic |
| Protection | Over-current breaker, chamber over-temp protection, saturated tank over-temp protection, low-water-level cutoff |
| Timer Range | 0–9999 h/min/sec (user-configurable) |
| Power Supply | 220 V/50 Hz or 380 V/50 Hz |
| Internal Volume | 100–1080 L |
| Compliance | ASTM B117, ISO 9227, JIS Z2371, CNS 12214 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | Yes |
| Model | SH Series |
| Temperature Control Accuracy | ±0.5°C |
| Chamber Uniformity | ±1°C |
| Fog Deposition Rate | ±0.3 mL/80 cm²·h |
| Test Temperatures | 35±1°C / 50±1°C |
| Construction Material | PVC Board with Ring-Band Structural Reinforcement |
| Saturation Tower | Henry’s Law-Based Humidification |
| Spray Nozzle | Bernoulli-Principle Atomization |
| Low-Solution Alert | Yes |
| Fault Detection System | Visual & Audible Indication |
| Power Supply | 220 V, 1-phase |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SH-110 |
| Construction Material | Imported corrosion-resistant, high-strength PVC/PP inner chamber |
| Sealing Method | Water-seal design (zero salt fog leakage) |
| Standard Accessories | One round-bar & one V-shaped sample rack, two nozzles, two funnels + calibrated collection cylinders |
| Safety Protections | Leakage current, short-circuit, over-temperature, low-water, end-of-test, and over-current protection |
| Power Supply | AC220V±10% 50Hz or AC380V±10% 50Hz |
| Operating Ambient | 5°C–30°C, ≤85% RH |
| Temperature Range | +5°C to 55°C |
| Temperature Uniformity | ≤±2°C |
| Temperature Fluctuation | ≤±0.5°C |
| Salt Fog Deposition Rate | 1–2 mL / 80 cm²·h |
| Spray Mode | Continuous or programmable cyclic spray |
| Timer Range | 1–999 hours (adjustable in seconds/minutes/hours) |
| Humidity Range (optional wet-salt mode) | 85–95% RH |
| Compliance | GB/T 2423.17, GB/T 10125–1997, GB/T 10587, ASTM B117, ISO 3768/3769/3770, DIN 50021, JIS Z 2371, MIL-STD-810, IEC 60068-2-11 |
| Brand | LabCompanion |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SH-160 |
| Chamber Volume | 900 L |
| Internal Dimensions (L×W×D) | 1600 × 1000 × 900 mm |
| External Dimensions (L×W×D) | 1740 × 1140 × 1000 mm |
| Test Solution Capacity | 60 L |
| Temperature Control Accuracy | ±0.3 ℃ |
| Spray Method | Continuous & Programmable Cyclic Spray |
| Heating Method | Steam Direct Injection via Titanium Heater |
| Humidity Generation | Henry’s Law-Based Saturated Air Humidification in Pressure Tank |
| Nozzle Material | Precision Borosilicate Glass (≥4000 hr crystallization-free operation) |
| Control System | Digital PID Controller with Dual Over-Temperature Protection |
| Water Supply | Auto/Manual Refill with Low-Level Alarm |
| Fog Seal | Water-Lock Sealing Trough with Auto-Fill |
| Viewing Window | Auto-Demisting System |
| Lid Actuation | Pneumatic Cylinder-Assisted Lift |
| Timer Range | 0.01 s to 9999 h |
| Compliance | ASTM B117, ISO 9227, JIS Z2247, GB/T 2423.17 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SH-60 |
| Power | 1.3 kW |
| Temperature Range | +5°C to 55°C |
| Temp. Uniformity | ≤ ±2°C |
| Temp. Stability | ≤ ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Spray Mode | Continuous or Cyclic |
| Test Timer | 1–999 (s/min/h) adjustable |
| Chamber Dimensions (D×W×H) | 450×600×400 mm |
| External Dimensions (D×W×H) | 560×1140×1000 mm |
| Compliance | ASTM B117, ISO 9227, GB/T 2423.17, GB/T 10125, JIS Z 2371, DIN 50021, IEC 60068-2-11 |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SH-60 |
| Temperature Range | R.T. +10 °C to 55 °C |
| Test Temp | 35 °C ±1 °C (NSS), 50 °C ±1 °C (CASS) |
| Temp. Uniformity | ±2 °C |
| Temp. Stability | ±0.5 °C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Spray Mode | Continuous or Cyclic |
| Timer Range | 0–9999 h/min/sec |
| Chamber Material | 8 mm PVC board with reinforced banding |
| Saturated Air Tank | SUS#304 stainless steel |
| Heating Element | Stainless steel tubular heater |
| Control System | PID + PWM + SSR, digital display, ±0.3 °C accuracy |
| Safety Protections | Overcurrent breaker, chamber overtemperature protection, saturated air tank overtemperature protection, low-water-level cutoff |
| Power Supply | 220 V/50 Hz or 380 V/50 Hz |
| Internal Volume | 100 L |
| Dimensions (W×D×H) | 600×450×400 mm (chamber) |
| Standard Accessories | Sample racks, calibrated collection funnel, glass nozzle, spray tower assembly, operation manual |
| Brand | LabCompanion |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SH-60 |
| Temperature Range | R.T. + 10 °C to 55 °C |
| Test Temperatures | 35 °C ± 1 °C (NSS), 50 °C ± 1 °C (CASS) |
| Temp. Uniformity | ±2 °C |
| Temp. Stability | ±0.5 °C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Control Method | PID + PWM + SSR |
| Chamber Material | 8 mm PVC board with ring-reinforced structure |
| Saturated Air Tank | SUS#304 stainless steel |
| Heating Element | Stainless steel tubular heater |
| Safety Protections | Over-current breaker, chamber over-temp protection, saturated tank over-temp protection, low-water-level cutoff |
| Compliance | ASTM B117, ISO 9227, JIS Z2243, CNS 12217 |