Physical Property Testing Instruments
Filter
Showing 8131–8160 of 12427 results
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Temperature Range | -40 to 100 °C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ±1 °C |
| Humidity Uniformity | ±5% RH |
| Ramp Rate | ~4.0 °C/min (heating), ~1.0 °C/min (cooling) |
| Construction Material | SUS304 Stainless Steel (matte finish, interior and exterior) |
| Cooling System | Air-cooled, single-stage compressor (down to -20 °C) |
| Door Configuration | Dual front-and-rear access doors |
| Shelf System | LCD-adjustable-angle fixtures |
| Load Validation Medium | Aluminum plates (not plastic) |
| Safety Protections | Fuseless circuit breaker, compressor overload protection, refrigerant high/low pressure switches, over-temperature cut-off, fuse, fault alert system |
| Insulation Material | High-density ethyl chloroformate-based polyurethane foam (heat-resistant) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -20°C to +150°C / -40°C to +150°C / -50°C to +150°C / -60°C to +150°C / -70°C to +150°C / -85°C to +150°C |
| Humidity Range | 20–98% RH |
| Temperature Stability | ±0.5°C |
| Temperature Uniformity | ±1.5°C |
| Temperature Deviation | ≤±2.0°C |
| Heating Rate (non-linear, unloaded) | -20°C to +150°C in <45 min |
| Cooling Rate (non-linear, unloaded) | +20°C to -20°C in <45 min |
| Humidity Fluctuation | ±1% RH |
| Humidity Uniformity | ±3.0% RH |
| Inner Chamber Material | Mirror-finish SUS304 stainless steel |
| Outer Chamber Material | SUS304 stainless steel or rust-inhibited cold-rolled steel with powder-coated white finish |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range (Hot Zone) | +80°C to +200°C |
| Temperature Range (Cold Zone) | −10°C to −70°C |
| Operational Test Range | −40°C to +150°C |
| Temperature Control Accuracy | ±2°C |
| Temperature Resolution | 0.01°C |
| Hot Zone Ramp Rate (RT to +150°C) | ≤40 min |
| Cold Zone Ramp Rate (RT to −70°C) | ≤100 min |
| Test Zone Temperature Recovery Time | 3–5 min |
| Internal Dimensions (W×H×D) | 600 × 500 × 500 mm |
| External Dimensions (W×H×D) | 1500 × 2100 × 2250 mm |
| Construction Material | SUS#304 Stainless Steel (Interior & Exterior) |
| Insulation | High-Density Glass Wool + Rigid Polyurethane (PU) Foam |
| Anti-Sweat System | K-Type Thermocouple-Based Thermal Compensation |
| Actuation Method | Pneumatic Dual-Zone Door Switching |
| Accessories | High-Tensile Packing (−200°C to +400°C), Dual Adjustable Test Shelves |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 12,500 (approx.) |
| Thickness Range | 0.03–99 µm |
| Potential Difference Range | −100 to +400 mV |
| Thickness Accuracy | ±10% |
| Potential Difference Accuracy | ±5% |
| Reproducibility | <5% RSD |
| Display | 4-digit LED, two decimal places |
| Temperature Control (Chamber) | 0–99.9 °C, PID-controlled, resolution ±0.3 °C |
| Saturated Air Chamber Temp | 0–99.9 °C, PID-controlled, resolution ±0.3 °C |
| Heating Tank Safety Limit | 0–120 °C |
| Saturated Air Tank Safety Limit | 0–120 °C |
| Timer Range | 9.9 s–9990 h |
| Elapsed Time Meter | 0–9999.9 h |
| Air Pressure Regulator | Precision filter included |
| Pressure Gauge | 0–2.5 kg/cm², accuracy 0.01 kg/cm² |
| Toggle Switch | Illuminated, rated for ≥20,000 actuations |
| Key | Temperature Range: –40 °C to +150 °C (optional down to –120 °C) |
|---|---|
| Humidity Range | 30–98% RH (optional 5–98% RH) |
| Temperature Resolution | 0.01 °C |
| Humidity Resolution | 0.1% RH |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤±2 °C |
| Humidity Deviation | ≤±2.5% RH |
| Heating Rate | 2.0–3.0 °C/min |
| Cooling Rate | 0.7–1.0 °C/min |
| Control System | TEMI880 color LCD touchscreen controller |
| Power Supply | 380 V ±5%, 50 Hz, 3P+N+G (customizable to 220 V) |
| Interior Material | SUS304 stainless steel |
| Exterior Material | SUS304 stainless steel or A3 steel with electrostatic powder coating |
| Compliance | GB/T 5170.2–1996, GB/T 5170.5–1996, GB 2423.1–1989, GB 2423.2–1989, GB 2423.22–1987, GB 10589–1989, GB 10592–1989, GB 11158–1989 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,100 (approx.) |
| Temperature Range | −40°C to +150°C (standard) |
| Humidity Range | 20%–98% RH |
| Control Accuracy | ±0.5°C / ±2.5% RH |
| Uniformity | ±1.0°C / ±3.0% RH |
| Cooling Water Requirement | 10–28°C, 0.1–0.3 MPa |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, IEC 60068-2-1, IEC 60068-2-2, GJB 1032A–2021, MIL-STD-2164A |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Load Capacity | Up to 5 kN (configurable options: 1 kN / 2.5 kN / 5 kN) |
| Force Resolution | 1/100,000 of full scale |
| Force Accuracy | ±0.5% of reading (ISO 7500-1 Class 1) |
| Crosshead Speed Range | 0.001–500 mm/min (programmable, ±0.2% speed accuracy) |
| Displacement Resolution | 0.001 mm |
| Data Acquisition Rate | 1 kHz |
| Compliance | ASTM E4, ASTM D638, ASTM D882, ISO 527-1, ISO 1798, GB/T 16491, GB/T 1040.1–1040.5, GB/T 2792, GB/T 3923.1 |
| Brand | Otsuka |
|---|---|
| Origin | Japan |
| Model | ELSZ-2000 |
| Dispersion Method | Dry & Wet |
| Instrument Type | Laboratory Laser Particle Analyzer |
| Measurement Range | 0.1 nm – 10 µm |
| Repeatability | <5% |
| Measurement Time | 3 min |
| Zeta Potential Range | ±200 mV |
| Temperature Control | 0–90 °C (0.1 °C resolution) |
| Detection Principle | Electrophoretic Light Scattering (ELS), Dynamic Light Scattering (DLS), Static Light Scattering (SLS) |
| Laser Sources | Dual semiconductor lasers (660 nm, 30 mW & 70 mW) |
| Detector | High-sensitivity APD |
| Sample Compatibility | Liquid suspensions, planar solid surfaces (15 mm × 35 mm), high-concentration dispersions |
| Molecular Weight Range | 360 – 20,000,000 Da (Mw) |
| pH Titration Capability | 1–13, 0.1 µL resolution, triple independent syringe system |
| Brand | Otsuka Electronics |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | ELSZ-neo SE |
| Price | Upon Request |
| Particle Size Range | 0.6 nm – 10 µm |
| Temperature Control Range | 0–90 °C |
| Particle Sizing Method | Dynamic Light Scattering (Photon Correlation Spectroscopy) |
| Sample Concentration Range | Zeta Potential: 0.001–40% w/v |
| Particle Size | 0.00001% (0.1 ppm) – 40% w/v*¹ |
| Zeta Potential Measurement Range | No practical upper limit |
| Zeta Potential Principle | Electrophoretic Light Scattering (Laser Doppler Velocimetry) |
| Particle Size Principle | Dynamic Light Scattering (DLS) |
| Optical Configuration | Heterodyne for Zeta Potential |
| Light Source | Narrow-band Diode Laser |
| Detector | High-Sensitivity APD |
| Standard Cell | Flow-through Cell for Simultaneous Zeta & Size |
| Optional Accessories | Fluorescence Cut-off Filter, Flat-sample Electrode Cell for High-Salt Surface Zeta, Temperature Gradient Module |
| Power Supply | 100 V ±10%, 250 VA |
| Dimensions (W×D×H) | 330 × 565 × 245 mm |
| Weight | 22 kg |
| Brand | Otsuka Electronics |
|---|---|
| Origin | Japan |
| Model | OPTM |
| Measurement Principle | Spectral Interferometry |
| Optical Range | UV–NIR (e.g., 200–1100 nm) |
| Measurement Speed | <1 sec per point |
| Sample Stage | Motorized Auto XY Stage (standard) |
| Reflectance Accuracy | High-fidelity absolute reflectance measurement |
| Output Data | Film thickness (nm), refractive index (n), extinction coefficient (k) |
| Compliance | Designed for ISO/IEC 17025-aligned QC environments, supports GLP/GMP traceability workflows |
| Customization | Optional embedded probe head, fixed-stage configurations, user-defined measurement sequences |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,500 (approx.) |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, GB/T 5170.2–2017, GB/T 11158–2012, GB/T 10592–2023 |
| Control System | 7" or 10" Touchscreen PID Controller with Ethernet/RS-232/RS-485 Interface |
| Refrigeration | Dual-stage cascade refrigeration system with hermetic Tecumseh (France) compressors |
| Interior Material | Electropolished 304 stainless steel, full TIG-welded seams |
| Exterior Material | Powder-coated or polyurethane-coated structural steel |
| Vibration Integration | Standard mounting interface for electrodynamic or servo-hydraulic shakers |
| Data Logging | Onboard SD/USB storage, email/SMS alarm notifications, audit-trail-capable event logging |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,500 (approx.) |
| Table Size | 450 × 450 mm or 500 × 500 mm |
| Amplitude Range | 0–5 mm (adjustable) |
| Frequency Range | 1–400 Hz / 1–2000 Hz / 1–5000 Hz (selectable) |
| Load Capacity | 150 kg |
| Waveform | Sine (half-wave or full-wave, adjustable) |
| Acceleration Range | 0–20 g (adjustable) |
| Sweep Function | 1–5000 Hz (user-defined upper/lower limits and dwell time) |
| Programmable Mode | Up to 15 segments, each with independent frequency and duration settings |
| Octave Sweep | 15-step, bidirectional (low-to-high, high-to-low, low-to-high-to-high), loopable |
| Logarithmic Sweep | Three modes (low-to-high, high-to-low, low-to-high-to-low), loopable |
| Vibration Axis | Vertical (Y), Horizontal (X/Z), or Triaxial (X/Y/Z) |
| Motor Power | 2.2 kW |
| Supply Voltage | 220 V, 50 Hz |
| Max Current | 10 A |
| Timing Control | User-defined duration (in seconds) |
| Control Interface | Full PC-based control with optional analog/digital I/O |
| Measurement Output | Requires external accelerometer and displacement sensor for quantitative amplitude/acceleration validation |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | Ambient +20°C to 500°C |
| Heating Method | PID-controlled SSR-driven Far-Infrared Ni-Cr Alloy Heater (2 kW × 1) |
| Internal Chamber Material | SUS304 Stainless Steel |
| External Cabinet Material | 1.2 mm Cold-Rolled A3 Steel with Powder-Coated Finish |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Door Insulation | Glass Fiber Wool |
| Air Circulation | Forced Horizontal Airflow via High-Temperature Resistant Turbine Fan |
| Over-Temperature Protection | Dual-Stage Thermal Cut-Off System |
| Compliance | Designed per IEC 60068-2-2, ASTM D3418, and ISO 17025-relevant environmental test infrastructure requirements |
| Brand | Ouke |
|---|---|
| Origin | China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | Imported Components |
| Price | USD 2,650 (FOB Guangdong) |
| Internal Dimensions (W×H×D, mm) | 500×600×500 to 1000×1000×1000 |
| External Dimensions (W×H×D, mm) | 1750×2250×2350 to 2350×2800×3000 |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range (Optional) | 20–98% RH |
| Rapid Thermal Transition Range | −45 °C to +85 °C |
| Rapid Thermal Transition Accuracy | ±3.0 °C |
| Ramp Rates | 5–30 °C/min (Linear or Nonlinear Mode, Selectable) |
| Temperature Resolution | 0.1 °C |
| Humidity Resolution | 0.1% RH |
| Temperature Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0% RH |
| Temperature Control Stability | ±0.5 °C |
| Humidity Control Stability | ±2.5% RH |
| Inner Chamber Material | SUS304 Stainless Steel |
| Outer Chamber Material | Cold-Rolled Steel with Powder Coating or Stainless Steel |
| Insulation | High-Density Polyurethane Foam (CFC-Free) |
| Refrigeration System | Water-Cooled |
| Compressor | Tecumseh (France) or Bitzer (Germany) |
| Power Supply | AC 380 V, 3-Phase 5-Wire, 50/60 Hz |
| Weight | 950–2300 kg |
| Brand | OUKE |
|---|---|
| Model Series | OK-ES |
| Frequency Range | 0.5–600 Hz (±0.1%) |
| Max. Load Capacity | 80 kg (100 kg peak) |
| Peak Acceleration | 0–15 g (0–150 m/s²) |
| Peak Sine Force | 1500 kgf |
| Displacement (p-p) | 0–4 mm |
| 台面尺寸 | 500 × 500 × 6 mm (standard) |
| 台体 Dimensions (H×W×D) | 500 × 550 × 500 mm |
| Power Input | 20 A, 200–240 VAC ±20%, 50/60 Hz |
| Power Consumption | 4.4 kW |
| Cooling Method | Natural Air Cooling |
| Operating Ambient | −10 °C to +80 °C, 10–95% RH |
| Noise Level | ≤50 dB(A) |
| Magnetic Field Emission | ≤100 mG at 1 m |
| Control Interface | RS-485 (PC-compatible) |
| Resolution | Frequency display to 0.01 Hz |
| Compliance | Supports ASTM D999, ISO 2247, IEC 60068-2-6, MIL-STD-810H, GB/T 4857.7, GB/T 2423.10 |
| Brand | Ouke |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 105–132 °C (control point) |
| Temperature Uniformity | ±2.0 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Range | 100 % RH |
| Humidity Stability | ±2.5 % RH |
| Humidity Uniformity | ±5.0 % RH |
| Pressure Range | 0.05–0.196 MPa (0.5–2 kg/cm², control point) |
| Heating Time | 35 min (ambient to 132 °C) |
| Pressurization Time | 40 min (ambient to 2 kg/cm²) |
| Capacity | Standard chamber configuration for automotive subassemblies and electronic packages |
| Safety Features | Dual interlocked circular door, automatic pressure relief, vacuum pre-conditioning, real-time LED timer with start-trigger logic, fault-indicating safety LIMIT system |
| Compliance | Designed per IEC 60068-2-66, JESD22-A102D, MIL-STD-202G Method 108, and aligned with JEDEC A110B for HAST/PCT testing protocols |
| Brand | Ouke |
|---|---|
| Model Series | KS-TH-100 / KS-TH-225 / KS-TH-500 / KS-TH-800 / KS-TH-010 |
| Internal Dimensions (D×W×H, mm) | 450×450×500 |
| External Dimensions (D×W×H, mm) | 1100×750×1000 |
| Construction | Exterior – Cold-rolled carbon steel with phosphating + electrostatic powder coating OR SUS304 stainless steel brushed finish |
| Temperature Range | +10°C to +150°C |
| Humidity Range | 85–98% RH |
| Temp. Uniformity/Fluctuation | ±2°C / ±0.5°C |
| Humidity Deviation | +2 / −3% RH |
| Heating Rate | 1–3°C/min |
| Controller | Microprocessor-based integrated temperature & humidity controller |
| Set/Display Resolution | 0.1°C / 1% RH |
| Sensor | PT100 platinum resistance thermometer & capacitive RH sensor |
| Heating System | Independent nickel-chromium alloy heater |
| Humidification | External isolated stainless steel shallow-surface evaporative humidifier |
| Dehumidification | Evaporator coil dew-point contact method |
| Water Supply | Auto-controlled with condensate recovery |
| Air Circulation | High-efficiency low-noise AC motor + multi-blade centrifugal impeller |
| Safety Protections | Over-temperature, over-current, leakage, short-circuit, dry-run, motor overheat, water shortage |
| Power Supply | AC 380V ±10%, 50 ±0.5 Hz, 3-phase 5-wire |
| Ambient Operating Conditions | 5–30°C, ≤85% RH |
| Energy-Saving Technology | PWM-controlled refrigerant flow regulation (cold/hot bypass + main circuit) enabling compressor-only low-temp stabilization — ~40% energy reduction vs. conventional PID-heating compensation methods |
| Compliance Context | Designed for test execution per IEC 60068-2-1 (Cold), IEC 60068-2-2 (Dry Heat), IEC 60068-2-30 (Damp Heat, Cycling), MIL-STD-810H Method 502.6 & 507.6, and supports GLP/GMP-aligned validation protocols including IQ/OQ documentation traceability |
| Brand | Oxford Instruments |
|---|---|
| Origin | USA |
| Model | CMI-233 |
| Measurement Principle | Dual-mode (Magnetic Induction for ferrous substrates |
| Measurement Range | 0–3.05 mm (magnetic induction), 0–1.52 mm (eddy current) |
| Accuracy | ±1% or ±0.1 µm (per certified reference standards) |
| Resolution | 0.1 µm |
| Minimum Substrate Thickness | 0.35 mm |
| Minimum Curvature Radius | 5 mm (convex), 25 mm (concave) |
| Minimum Test Area | Ø20 mm |
| Standards Compliance | ASTM B499, B530, B244, B259 |
| Data Storage | 12,400 readings |
| Display | 1/2-inch backlit LCD |
| Interface | RS-232 serial port |
| Power | 9 V alkaline or rechargeable battery |
| Weight | 260 g (with battery) |
| Dimensions | 149 × 79.4 × 30.2 mm |
| Statistical Functions | Mean, SD, min/max, histogram, CPK |
| Units | Switchable between metric (µm, mm) and imperial (mils) |
| Brand | Oxford Instruments |
|---|---|
| Origin | USA |
| Model | CMI153 |
| Measurement Range (Ferrous) | 0.001–2.04 mm (0.1–80 mil) |
| Measurement Range (Non-Ferrous) | 0.001–1.52 mm (0.1–60 mil) |
| Minimum Substrate Thickness | 305 µm (12 mil) |
| Dimensions | 9.53 × 5.08 × 2.52 cm |
| Weight | 71 g |
| Power | 2 × AA batteries |
| Units | Auto-switching between metric and imperial |
| Compliance | ASTM B499, B530, B244, B529 |
| Brand | Oxford Instruments |
|---|---|
| Origin | USA |
| Model | CMI233 |
| Measurement Principle | Dual-mode (Magnetic Induction for ferrous substrates |
| Measurement Range | 0–3.05 mm (magnetic induction), 0–1.52 mm (eddy current) |
| Resolution | 0.1 µm |
| Accuracy | ±1% or ±0.1 µm (per certified reference standards) |
| Minimum Substrate Thickness | 0.35 mm |
| Minimum Curvature Radius | 5 mm (convex), 25 mm (concave) |
| Minimum Test Area | Ø20 mm |
| Compliance | ASTM B499, B530, B244, B259 |
| Data Storage | 12,400 readings |
| Display | 1/2-inch backlit LCD |
| Interface | RS-232 serial port |
| Power | 9 V alkaline or rechargeable battery |
| Weight | 260 g (incl. battery) |
| Dimensions | 149 × 79.4 × 30.2 mm |
| Units | Switchable metric/imperial |
| Statistical Functions | Mean, SD, min/max, histogram, CPK, count |
| Scan Mode | Time-based averaging with min/max capture |
| Keypad | Sealed membrane (9-key basic / 16-key enhanced) |
| Brand | Oxford Instruments |
|---|---|
| Origin | USA |
| Model | CMI233 |
| Measurement Principle | Magnetic Induction (for non-magnetic coatings on ferrous substrates) & Eddy Current (for non-conductive coatings on non-ferrous conductive substrates) |
| Accuracy | ±1% or ±0.1 µm (per certified reference standards) |
| Measurement Range | Magnetic Induction: 0–3.05 mm (0–120 mils) |
| Eddy Current | 0–1.52 mm (0–60 mils) |
| Resolution | 0.1 µm |
| Minimum Substrate Thickness | 0.35 mm |
| Minimum Curvature Radius | 5 mm (convex), 25 mm (concave) |
| Minimum Measured Area | Ø20 mm |
| Compliance | ASTM B499, B530, B244, B259 |
| Data Storage Capacity | 12,400 readings |
| Display | 1/2-inch backlit LCD |
| Interface | RS-232 serial port |
| Power | 9 V alkaline or rechargeable battery |
| Weight | 260 g (including battery) |
| Units | Dual metric/imperial with toggle switch |
| Statistical Functions | Mean, Std Dev, Min/Max, Histogram, CPK, Count |
| Scan Mode | Time-based automatic averaging with optional min/max capture |
| Keypad | Sealed membrane, 9-key basic / 16-key enhanced layout |
| Brand | Oxford Instruments |
|---|---|
| Origin | USA |
| Model | CMI243 |
| Accuracy | ±1% |
| Measurement Range | 2–38 µm (0.08–1.50 mils) |
| Resolution | 0.25 µm (0.01 mil) |
| Minimum Measurable Radius | 1.55 mm (0.06 in) |
| Standards Compliance | ASTM B244, ASTM B259, DIN 50984, ISO 2360, ISO 29168 (Draft), BS 5411 Part 3 |
| Data Storage | 12,400 readings |
| Display | LCD with 1.27 cm character height |
| Interface | RS-232 serial port (adjustable baud rate) |
| Power | 9 V alkaline or rechargeable battery |
| Dimensions | 14.9 × 7.94 × 3.02 cm |
| Weight | 0.26 kg (including battery) |
| Brand | Oxford Instruments |
|---|---|
| Origin | Switzerland |
| Model | FT-I04 |
| Instrument Type | Nanoindenter |
| Maximum Load Range | 2 N (across 5 selectable load channels) |
| Load Resolution | 0.5 nN (FT-S200 sensor) |
| Displacement Resolution | 0.05 pm |
| Indenter Tip Materials | Diamond, Tungsten Carbide, Sapphire |
| Indenter Geometries | Berkovich, Cube Corner, Flat Punch, Wedge, Conical, Spherical |
| Brand | Oxford Instruments |
|---|---|
| Origin | Switzerland |
| Model | FT-NMT04 |
| Load Range | 5 selectable full-scale channels, up to 2 N (FT-S2’000’000) |
| Load Resolution | 0.5 nN (FT-S200) |
| Displacement Range | 0.05 nm – 21 mm |
| Displacement Resolution | 0.05 pm |
| Brand | Oxford Instruments |
|---|---|
| Origin | Guangdong, China |
| Model | TDRZK2130 |
| Impedance Range | 20–150 Ω |
| Measurement Accuracy | ±1% at 50 Ω |
| Test Length | 0.05–2 m |
| Horizontal Resolution | 0.2 mm |
| Vertical Resolution | 0.05 Ω |
| Measurement Method | Time-Domain Reflectometry (TDR) |
| Bandwidth | 3 GHz |
| Compliance | IPC-TM-650, IPC-2141 |
| Brand | NANJING DAZHAN |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Differential Scanning Calorimeter (DSC) |
| Model | DSC 100A |
| Sample Capacity | Single-sample |
| Temperature Range | Ambient to 600 °C |
| Heating/Cooling Rate | 0.1–100 K/min |
| Temperature Accuracy | ±0.01 °C |
| DSC Signal Range | 0–±600 mW |
| Temperature Stability | ±0.01 °C |
| Temperature Resolution | 0.01 °C |
| DSC Noise Level | 0.01 μW |
| DSC Sensitivity | 0.001 mW |
| DSC Resolution | 0.01 μW |
| Temperature Repeatability | ±0.1 °C |
| Gas Flow Control | Digital Mass Flow Controller |
| Interface | USB 2.0 Bidirectional Communication |
| Display | 7-inch 24-bit Color TFT Touchscreen |
| Sensor Material | Corrosion-Resistant Alloy |
| Calibration | Onboard Standard Reference Materials with One-Touch Thermal & Enthalpy Calibration |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | JB-4000 |
| Power Supply | 220 V AC ±10% |
| Max Operating Pressure | 2.5 MPa |
| Burst Pressure | 2.7–3.3 MPa |
| Temperature Control Range | Ambient to 200 °C |
| Temperature Uniformity | ±0.5 °C |
| Chamber Dimensions (W×D×H) | 560 × 420 × 670 mm |
| Bomb Volume | 4000 cm³ |
| Heating Power | 2.4 kW |
| Temperature Display | Digital, Intelligent PID Control |
| Bomb Construction | Inner chamber — AISI 304 stainless steel |
| Safety Features | Adjustable over-temperature alarm (0–200 °C), pressure relief valve, dual interlock lid mechanism |
| Origin | Tianjin, China |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Domestic |
| Model | Plastic Oxygen Index Tester |
| Price | USD 145 (approx.) |
| Gas Flow Total | 10.6 L/min |
| O₂ Concentration Range | 0–100% |
| Resolution | 0.1% |
| Accuracy | ±0.1% |
| Response Time | <3 s |
| O₂ Adjustment Step | 0.2% (v/v) |
| Sensor Type | External Electrochemical O₂ Sensor |
| Display | Digital Concentration Meter (O₂%, N₂ flow, total flow) |
| Standards Compliance | GB/T 2406, GB/T 10707, GB/T 5454, ASTM D2863, ISO 4589-2, BS 2782-1:141, NF T51-071 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,950 (FOB) |
| Temperature Range | 25–40 °C |
| Humidity Range | 30–65 %RH |
| Ozone Concentration Range | 50–1500 pphm |
| Temp. Uniformity | ±0.5 °C |
| Sample Rack | 360° continuous rotation at 1 rpm |
| Gas Flow Velocity | 8–16 mm/s |
| Control System | Weilun color touchscreen + Siemens PLC |
| Ozone Sensor | Non-dispersive UV absorption type, ≥5 yr service life |
| Compliance Standards | GB/T 7762–2003, GB/T 2951.21–2008, GB/T 11206–2009, ISO 1431-1:2004 |