Pore Size and Porosity Analyzer
Filter
Showing all 25 results
| Brand | Aisida |
|---|---|
| Model | JK2400 |
| Measurement Principle | Contactless CIS-based optical imaging with diffuse LED illumination |
| Pore Diameter Range | 0.10–10.0 mm |
| PCB Size Capacity | 120 × 64 mm to 610 × 610 mm |
| PCB Thickness Range | 0.08–10 mm |
| Max. Hole Count per Scan | 600,000 |
| Inspection Speed | 4.2 m/min |
| Diameter Measurement Accuracy | ≤21 µm |
| Tolerance Specification | ±50 µm |
| Imaging Method | Proximity CIS line-scan sensor with short-focus lens |
| Light Source | Diffuse linear LED array |
| Power Supply | 220 V AC, 15 A, 3 kW |
| Compressed Air Requirement | 0.6 MPa |
| Dimensions (L×W×H) | 4050 × 1280 × 1220 mm |
| Weight | 450 kg |
| Data Storage | Integrated relational database with timestamped audit trail |
| Communication Interface | CAN bus architecture |
| Compliance Framework | Designed for integration into ISO 9001-certified PCB manufacturing lines |
| Brand | Anton Paar |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported Instrument |
| Model | POROMETER 3G |
| Pricing | Available Upon Request |
| Brand | Asida |
|---|---|
| Model | JK3200, JK3600 |
| Detectable Hole Diameter Range | 0.15–10 mm |
| PCB Size Range | 100 × 150 mm to 630 × 650 mm |
| PCB Thickness Range | 0.3–10 mm |
| Max. Hole Count per Board | 150,000 |
| Inspection Speed | 3.5–12.5 m/min (adjustable) |
| Hole Position Repeatability | ±40 µm |
| Hole Dimension Tolerance | ±40 µm |
| Minimum Hole-to-Hole Edge Distance | 0.15 mm |
| Detection Method | CIS Contact Image Sensor (Close-Range Linear Array Imaging) |
| Light Source | Diffuse Long-Strip LED Illumination |
| Power Supply | AC 220 V, 50 Hz |
| Compressed Air Requirement | 0.5–0.7 MPa |
| Dimensions (L×W×H) | 3550 × 1200 × 1100 mm |
| Weight | 450 kg |
| Origin | Guangdong, China |
| Distribution Type | Authorized Distributor |
| Brand | Beishide Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | BSD-LN |
| Pricing | Upon Request |
| Brand | Beishide Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | BSD-LNL |
| Pricing | Upon Request |
| Brand | Beishide Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | BSD-LNT |
| Pricing | Available Upon Request |
| Key | Brand: Beishide Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer | Yes |
| Type | Domestic |
| Model | BSD-PB |
| Price Range | USD 14,000 – 42,000 |
| Pore Size Range (Gas-Liquid) | 0.02–500 µm |
| Pore Size Range (Liquid-Liquid) | 5–500 nm |
| Vacuum-Assisted Wetting | Integrated automatic system |
| Dual Pressure Sensors | 0–1 bar & 0–40 bar, ±0.05 mbar accuracy |
| Dual Flow Sensors | 0–1 L/min & 0–200 L/min, ±0.1 mL/min accuracy |
| Compliance | GB/T 32361-2015, ASTM F316-03, ASTM D6767-02, ISO 2942, DIN ISO 4003, BS 7591-4, HY/T 051, HY/T 064 |
| Brand | Beishide Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | BSD-PBB |
| Pricing | Upon Request |
| Brand | Beishide Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | BSD-PBL |
| Price Range | USD 14,000 – 42,500 |
| Brand | Grace |
|---|---|
| Origin | USA |
| Model | M9170/M9180 |
| Confining Pressure Range | 0–10,000 psi (690 bar) |
| Pore Pressure Range | 0–500 psi (34 bar) |
| Core Diameter | 1.5″ (1″ optional) |
| Core Length | Up to 3″ |
| Porosity Range | 0–60% |
| Permeability Range | 0.0005 mD to 10 D |
| Test Gases | N₂, He, dry air |
| Measurement Principles | Boyle’s Law (porosity), Unsteady-state Pulse Decay (low-perm), Steady-state Flow (high-perm) |
| Klinkenberg Correction | Yes |
| Data Output Format | CSV |
| Software Platform | Windows-based native application |
| Construction | 316 Stainless Steel pressure vessels |
| Power Supply | 110/220 VAC, 50/60 Hz |
| [Brand | Isida |
|---|---|
| Origin | Guangdong, China |
| Model | XK22 |
| Resolution | 0.70–5.20 µm/pixel |
| Optical Magnification | 1.4×–9× (continuously adjustable) |
| Electronic Magnification | 50× |
| Light Source | Adjustable LED ring light + red laser diode (LD) positioning |
| CCD | High-sensitivity color CCD |
| Maximum PCB width | 780 mm (30") |
| Field of View | 3.4 mm × 2.5 mm to 0.53 mm × 0.4 mm |
| Repeatability | ±1 µm |
| Dimensions (L×W×H, instrument only) | 960 mm × 700 mm × 1220 mm |
| Weight (instrument only) | 145 kg |
| Power | 220 V ±10%, 50 Hz, 10 A |
| Operating Temperature | 0–40 °C] |
| Brand | Zhengye |
|---|---|
| Model | JK5200 |
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Pricing | Upon Request |
| Repeatability | ±30 µm (standard round holes) |
| Slot Length Repeatability | ±75 µm |
| Irregular Hole Repeatability | ±150 µm |
| Measurement Accuracy | ±20 µm (hole diameter ≤ 1 mm), ±30 µm (1 mm < diameter < 4 mm), ±40 µm (diameter ≥ 4 mm) |
| Inspection Speed | 3.0–12.5 m/min (configurable by mode: drilling-stage vs. finished-board) |
| Detectable Hole Diameter Range | 0.1–10 mm |
| Max. Board Format | 630 mm × 650 mm |
| Min. Board Format | 80 mm × 100 mm |
| Board Thickness Range | 0.3–10 mm |
| Minimum Hole-to-Edge Distance | ≥ 0.10 mm |
| Dimensions (L×W×H) | 3510 mm × 1160 mm × 1100 mm |
| Weight | ~800 kg |
| Brand | Micromeritics |
|---|---|
| Origin | USA |
| Model | AccuPore |
| Measurement Principle | Capillary Flow Porometry (CFP) |
| Standard Compliance | ASTM F316 |
| Pore Size Range | 0.013–500 µm (fluid-dependent) |
| Maximum Pressure | 500 psi (35 bar) |
| Gas Flow Rate Range | Up to 200 L/min |
| Sample Diameters Supported | 13 mm, 25 mm, 47 mm |
| Data Resolution | >1000 data points per run |
| Sampling Rate | 20 Hz |
| Operating Gases | Air or Nitrogen |
| Measurement Modes | Bubble Point, Wet/Dry, Wet/Calculated-Dry, Wet/Dry Flow Curve Analysis |
| Sample Prep Time | <30 s |
| Brand | Micromeritics |
|---|---|
| Origin | USA |
| Model | ASAP 2460 |
| Configuration | Dual-Station Base Module (Expandable to 4- or 6-Station) |
| Gas Dosing | Servo-Valve Controlled Quantitative Gas Injection & Evacuation |
| Gas Inlets | 5 Total (Including Dedicated Free-Space Measurement Inlet) |
| Analysis Duration Without Refill | Up to 60 h |
| BET Surface Area Throughput | 6 Samples in ≤30 min (with Two Expansion Modules) |
| Software Platform | MicroActive v4.x |
| Theoretical Models Supported | BET, Langmuir, t-Plot, DFT, NLDFT |
| Optional Configurations | Low-Surface-Area (Kr) Mode (10 mmHg Transducer), Micropore Mode (1 mmHg Transducer, Enhanced Low-Pressure Resolution, Compatible with N₂, Ar, CO₂, H₂) |
| Compliance Framework | Designed for GLP/GMP-aligned workflows |
| Brand | Micromeritics |
|---|---|
| Origin | USA |
| Model | TriStar II Plus |
| Analysis Stations | 3 (independent) |
| Measurable Surface Area | ≥0.01 m²/g (N₂), ≥0.001 m²/g (Kr) |
| Pore Volume Detection Limit | ≥4 × 10⁻⁶ cm³/g |
| Dewar Capacity | 2.75 L (optional 4 L) |
| Continuous Operation Time | up to 40 h |
| Gas Compatibility | N₂, Ar, CO₂, C₄H₁₀, CH₄, and other non-corrosive gases |
| P₀ Measurement | continuous, manual, or in-situ |
| Data Points per Isotherm | up to 1000 |
| Software | Windows-based with SPC reporting, DFT modeling, t-plot, αₛ-plot, isosteric heat calculation, and thickness model integration |
| Brand | NIUMAG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | NMRC12 |
| Quotation | Available upon Request |
| Magnetic Field Strength | 0.3 ± 0.05 T |
| Temperature Control Range | −30 °C to ambient, stability ±0.1 °C |
| Sample Dimensions | Cylindrical, Ø8 mm × H10 mm |
| Effective Pore Size Range | 4–1400 nm (using OMCTS as saturating fluid) |
| Method Principle | NMR Cryoporometry (NMRC) |
| Brand | Porometer |
|---|---|
| Model | POROLIQ |
| Origin | Germany |
| Technology | Liquid-Liquid Displacement (LLP) |
| Measurement Principle | Capillary Flow Porometry via Immiscible Liquid Pair (e.g., Isopropanol/Water) |
| Minimum Detectable Pore Diameter | 2 nm |
| Data Acquisition Mode | Stepwise Pressure Ramp with Equilibrium Validation Algorithm |
| Compliance Framework | ASTM F316-22, ISO 15901-1, USP <801>, GLP/GMP-ready audit trail support |
| Brand | Porometer |
|---|---|
| Origin | Germany |
| Model | POROLUX BP |
| Pressure Range | 0–5 bar (0–75 psi) |
| Pore Size Detection Range | 0.13–300 µm |
| Measurement Principle | Bubble Point Method (Capillary Flow Porometry) |
| Compliance | ASTM F316-22, ISO 4003, USP <801> |
| Software | POROLUX Control Suite v3.x (GLP-compliant audit trail, user access levels, 21 CFR Part 11 ready) |
| Brand | Porometer |
|---|---|
| Model | POROLUX™ Revo X |
| Origin | Germany |
| Measurement Principle | Gas-Liquid Capillary Flow (Capillary Flow Porometry, CFP) |
| Pore Size Range | 80 nm – 500 µm |
| Bubble Point Pressure Range | 0–8 bar (0–116 psi) |
| Max. Gas Flow Rate | 200 L/min |
| Dual Auto-Switching Flow Sensors | 0–10 L/min & 0–200 L/min |
| Dual Auto-Switching Pressure Sensors | 0–1 bar & 0–10 bar |
| Sample Holder Diameter | 25 mm |
| Max. Sample Thickness | 3 mm |
| Measurement Modes | Bubble Point (BP x-mL, BP pCF), Mean Flow Pore Size, Minimum Pore Size, Pore Size Distribution, Cumulative Flow Distribution, Gas Permeability |
| Optional Modules | Liquid Permeability, Fluid Source Integration |
| Software | PoreSmart™ with Curve Fitting, Statistical Pore Quantification (Total Pore Count, Total Pore Area [% & µm²], Open Porosity, Calculated Permeability in Darcy) |
| Patented Measurement Method | MP² (Multi-Step Pressure Progression) Technology |
| Compliance Ready | ASTM F316-22, ISO 15709:2022, USP <801>, GLP/GMP Data Integrity Support (Audit Trail, Electronic Signatures, 21 CFR Part 11 Ready) |
| Brand | Image Metrology |
|---|---|
| Model | SPIP 6.0.13 |
| Origin | USA |
| Software Type | Modular SPM/SEM/Interferometry Image Processing Platform |
| Supported Modalities | SPM, SEM, TEM, White-Light Interferometry, Confocal Microscopy, Optical Profilometry, 3D Topography |
| Core Modules | Base Analysis Module + 13 Optional Add-on Modules |
| Compliance | ASTM E2927, ISO 25178-2, ISO/IEC 17025 (data integrity workflows), FDA 21 CFR Part 11-ready audit trail (via optional GLP/GMP module) |
| Licensing | Perpetual node-locked or floating license |
| System Requirements | Windows 10/11 64-bit, ≥16 GB RAM, ≥50 GB SSD storage, OpenGL 4.5-compatible GPU |
| Brand | Tailin |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HTY-202 |
| Pressure Resolution | 0.005 MPa |
| Maximum Operating Pressure | 0.6 MPa |
| Power Source | Compressed Air or Nitrogen |
| Weight | 5 kg |
| Measurement Principle | Bubble Point Method (Based on H. Bechhold’s Theory) |
| Brand | TOPAS |
|---|---|
| Origin | Germany |
| Model | PSM-165 |
| Measurement Principle | Capillary Flow Porometry (CFP) |
| Pore Size Range | 0.25–130 µm |
| Max Test Pressure | 6 bar |
| Operating Fluid | TOPOR® wetting liquid (custom-formulated fluorinated inert fluid) |
| Power Supply | 110–230 V AC |
| Dimensions (W×H×D) | 480 × 390 × 310 mm |
| Weight | 12 kg |
| Compliance | ASTM E1294-89, ASTM F316-03 |
| Brand | YDWO |
|---|---|
| Origin | Shanghai, China |
| Model | WBL Series |
| Measurement Principle | Static Volumetric Nitrogen Physisorption at 77 K |
| Adsorption Gas | N₂ (default), He |
| P/P₀ Range | 1×10⁻⁶–0.998 |
| Surface Area Range | ≥0.0005 m²/g |
| Pore Size Analysis Range | 3.5–5000 Å |
| Pressure Sensor | Imported absolute pressure transducer, 0–133 kPa, ±0.12% FS |
| Temperature Sensors | PT-100, ±0.1 °C |
| Vacuum System | Imported dual-stage rotary vane pump, ultimate vacuum ≤1.0×10⁻⁴ Torr |
| Dewar Capacity | 2 L metal cryostat, >80 h hold time |
| Sample Stations | 1–3 independent analysis ports (model-dependent) |
| Data Output | BET, Langmuir, BJH, t-plot, D-A, H-K, NLDFT/GCMC pore size distributions, isotherms, total pore volume/surface area |
| Brand | YDWO (Yidian Woguang) |
|---|---|
| Model | WBL Series |
| Measurement Principle | Static Volumetric Nitrogen Physisorption at 77 K |
| Adsorption Gas | High-Purity N₂ (99.999%), optional He |
| P/P₀ Range | 1×10⁻⁶ to 0.998 |
| Surface Area Range | ≥0.0005 m²/g (no upper limit) |
| Pore Size Analysis Range | 0.35–500 nm (3.5–5000 Å) |
| Pressure Sensors | 3–6 × high-accuracy absolute transducers (0–133 kPa, ±0.12% FS) |
| Temperature Sensor | PT-100 (±0.1 °C) |
| Cryostat | 2 L metal Dewar, >80 h hold time |
| Ultimate Vacuum | ≤1.0×10⁻⁴ Torr |
| Vacuum Pump | Imported dual-stage rotary vane pump |
| Sample Capacity | 1–3 stations (model-dependent) |
| Compliance | ISO 9277, ISO 15901, GB/T 119587 |
| Software | Integrated analysis suite for BET, Langmuir, BJH, t-plot, D-A, H-K, NLDFT, GCMC, and true density calculation |
| Output | Printable reports & Excel export (isotherms, surface area, pore volume/area distribution, cumulative metrics) |
| Brand | Zhengye |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Product Origin | Domestic (China) |
| Model | Zhengye Smart Warehouse |
| Pricing | Available Upon Request |