Xenon Arc Weathering Test Chamber TYFZ-1200
| Origin | Jiangsu, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Classification | Domestic (China) |
| Model | TYFZ-1200 |
| Price | USD 45,800 (FOB Jiangsu) |
| Internal Chamber Dimensions | 1000 mm × 1000 mm × 1200 mm (W × D × H) |
Overview
The Xenon Arc Weathering Test Chamber TYFZ-1200 is an engineered environmental simulation system designed to replicate the full-spectrum solar irradiance—spanning UV, visible, and near-infrared wavelengths—as it occurs at Earth’s surface under natural daylight conditions. Based on ISO 4892-2, ASTM G155, and IEC 60068-2-9 standards, this chamber employs a water-cooled or air-cooled 1.8 kW or 2.5 kW xenon arc lamp source with precision-filtered optics to deliver spectrally accurate irradiance profiles. It integrates programmable temperature control (typically 10–80 °C black panel), relative humidity regulation (10–95% RH, non-condensing), and optional spray cycles to simulate diurnal thermal cycling, moisture condensation, and rain-induced degradation mechanisms. The system is intended for accelerated weathering evaluation of polymers, coatings, textiles, automotive trim, aerospace composites, and outdoor signage materials—supporting both comparative ranking and quantitative service-life prediction in accordance with ISO 11341 and ASTM D4329.
Key Features
- High-fidelity xenon arc light source with quartz envelope and broadband spectral output (290–800 nm), calibrated to match CIE Standard Illuminant D65 and ASTM G155 spectral power distribution requirements
- Programmable irradiance control (0.35–1.20 W/m² @ 340 nm) with real-time feedback via integrated silicon photodiode sensor and closed-loop PID regulation
- Black panel temperature (BPT) and chamber air temperature independently monitored and controlled via Pt100 RTD sensors and dual-zone heating/cooling circuits
- Humidity control system featuring ultrasonic humidification and refrigerated dehumidification, maintaining ±3% RH accuracy across operational range
- Robust stainless-steel 316L interior chamber with seamless welded construction, corrosion-resistant insulation, and reinforced observation window with IR-reflective laminated glass
- Intuitive 10.1-inch color touchscreen HMI with multi-language support (English, German, French, Spanish), built-in data logging (≥30-day buffer), and USB export capability
- Compliance-ready architecture supporting audit trails, user access levels (admin/operator/guest), and electronic signature options aligned with FDA 21 CFR Part 11 and GLP/GMP documentation requirements
Sample Compatibility & Compliance
The TYFZ-1200 accommodates standard specimen racks (up to 48 × 75 mm coupons or 12 × 150 mm strips) and supports custom fixture integration for three-dimensional automotive parts or architectural panels. Its internal volume (1.2 m³) permits uniform irradiance distribution per ISO 4892-2 Annex A, verified by NIST-traceable radiometric mapping. The chamber meets CE marking requirements under the EU Machinery Directive 2006/42/EC and Electromagnetic Compatibility Directive 2014/30/EU. All safety interlocks—including lamp overtemperature cutoff, door-open irradiance shutoff, and emergency stop circuitry—conform to EN 61000-6-2 and EN 61000-6-4. Optional IQ/OQ documentation packages are available for laboratory validation in regulated industries including medical device packaging (ISO 11607) and pharmaceutical secondary packaging (ICH Q1A).
Software & Data Management
Built-in firmware enables storage of ≥200 test programs with up to 99 segments per program, each configurable for irradiance setpoint, BPT, RH, spray duration, and dark cycle timing. Real-time trend graphs display irradiance, temperature, and humidity against time; historical data exports as CSV or PDF reports with timestamped metadata. For enterprise integration, optional Ethernet TCP/IP interface supports Modbus TCP communication and SCADA system compatibility. Data integrity safeguards include automatic backup to internal eMMC memory, tamper-evident log files, and password-protected configuration changes—facilitating compliance with ISO/IEC 17025 clause 7.5.2 on result reporting traceability.
Applications
- Accelerated UV degradation testing of automotive clearcoats and plastic fascia per SAE J2412 and GMW14124
- Fade resistance assessment of architectural paints and façade systems per ASTM D2244 and ISO 105-B02
- Photostability qualification of polymer-based medical device housings per ISO 10993-12
- Outdoor durability benchmarking of agricultural films, geotextiles, and photovoltaic encapsulants
- Correlation studies between xenon arc exposure and natural outdoor exposure (e.g., Arizona or Florida field sites) using ASTM G167 protocols
FAQ
What spectral filters are included with the TYFZ-1200?
The standard configuration includes Daylight-Q filter (matching terrestrial sunlight) and Window Glass-Q filter (simulating indoor through-glass exposure); additional filters such as Extended UV-Q are available upon request.
Is calibration certification provided with shipment?
Yes—a factory-issued NIST-traceable irradiance calibration certificate (valid for 12 months) and temperature/humidity verification report are included.
Can the chamber operate unattended for extended test durations?
Yes—equipped with redundant safety monitoring, automatic lamp replacement alerts, and UPS-compatible power management for uninterrupted 24/7 operation up to 1,000-hour continuous cycles.
Does the system support remote monitoring?
Optional Ethernet module enables secure web-based status viewing, alarm notifications via email/SMS, and limited parameter adjustment through HTTPS interface.
What maintenance intervals are recommended?
Xenon lamp replacement every 1,500 hours; filter replacement every 6 months or 2,000 hours; quarterly cleaning of optical components and humidity reservoir; annual full system verification per ISO/IEC 17025 guidelines.
