- All
- Favorite
- Popular
- Most rated
| Brand | SOLGE |
|---|---|
| Origin | South Korea |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Ferro-Mon Sensor |
| Product Type | Online Instrument |
| Detection Parameter | Ferrous Wear Debris Concentration |
| Output Format | Fe Saturation (%) |
| Communication Interface | LoRa Wireless |
| Compliance | PQ Standard |
| Application Domain | In-Service Lubricating Oil Monitoring for Rotating Machinery |
| Brand | TANAKA |
|---|---|
| Origin | Japan |
| Model | AFP-102 |
| Standards Compliance | ASTM D6371, IP 309, EN 116, JIS K2288, SH/T 0248 |
| Cooling Method | Integrated Peltier thermoelectric module (no formaldehyde or external chiller required) |
| Temperature Range | Ambient to –60 °C |
| Temperature Resolution | 0.1 °C |
| Cooling Modes | Linear ramp and stepwise (isothermal) cooling |
| Detection Principle | Dual-point optical meniscus tracking via LED-photodiode system with dedicated mechanical mounting bracket |
| Sample Compatibility | Diesel fuels, heating oils, biodiesel blends, and other middle distillates |
| Brand | ECH |
|---|---|
| Origin | Germany |
| Model | Aquamax KF PRO LPG |
| Application | Coulometric Karl Fischer titration for trace moisture determination in pressurized liquefied gases (LPG, LNG) and vapor-phase hydrocarbon streams |
| Detection Range | 0.1–1000 µg H₂O (equivalent to 0.1–500 ppmv in gas phase, depending on sample volume and density) |
| Sample Form | Liquid or vapor-phase, pressurized |
| Automation Level | Fully automated sample introduction, titration, rinsing, and method execution |
| Compliance | Designed per ISO 8573-3, ASTM D6304, ASTM D7429, and EN 15472 |
| Brand | Rtec |
|---|---|
| Origin | USA |
| Type | Electromagnetic Oscillating Tribometer |
| Load Range | 1–3000 N |
| Frequency Range | 1–500 Hz |
| Oscillation Amplitude | 0.005–4 mm |
| Temperature Range | Ambient to +400 °C (optional up to +1000 °C) |
| Force Sensing | High-accuracy piezoelectric tribosensors |
| Displacement Monitoring | LVDT-based real-time closed-loop control |
| Compliance Standards | ASTM D5706, D5707, D6425, D7421, D7594, E2789 |
| Brand | Rtec |
|---|---|
| Origin | USA |
| Model | FBT-12000 |
| Load Capacity | Up to 12,000 N (closed-loop servo-controlled) |
| Torque Measurement Range | 0–20 N·m |
| Rotational Speed | 0–3000 rpm (0.1 rpm resolution) |
| Temperature Range | Ambient to +150 °C |
| Optional Low-Temperature Control | Ambient to –40 °C |
| Compliance | ASTM D2596, D2783, D2266, D4172, D5183 |
| Brand | ECH |
|---|---|
| Origin | Germany |
| Model | TAN/TBN Titrator |
| Application Standard Compliance | IEC 62021-1, ISO 3771, ASTM D664, ASTM D2896, ASTM D4739 |
| Titration Method | Potentiometric Volumetric Titration in Anhydrous Medium |
| Measurement Range | 0.01–250 mg KOH/g |
| Resolution | 0.01 mg KOH/g |
| Power Supply | 100–240 V AC, 50/60 Hz, 30 VA |
| Stirrer Output | 12 V DC, 500 mA |
| Dimensions (W × H × D) | 30 × 45 × 30 cm (including reagent changer height) |
| Weight | ~3.5 kg (with reagent changer and empty bottles) |
| Brand | Rtec |
|---|---|
| Origin | USA |
| Model | MFT-3000 |
| Load Range | 0–3000 N |
| Reciprocating Stroke | 0–30 mm |
| Frequency Range | 0–80 Hz |
| Temperature Control | Ambient to +500 °C (up to +1000 °C optional) |
| Low-Temperature Option | Ambient to –60 °C |
| Thermal Cycling Option | –40 °C to +180 °C |
| Rotational Mode (optional) | 0.1–5000 rpm, 0.1 rpm resolution |
| Compliance | ASTM G133, G181, G119, G174, D5706, D5707, SH/T 0784, SH/T 0721, DIN 51834 |
| Brand | Rtec |
|---|---|
| Origin | USA |
| Model | FFT-M1 |
| Application | Tribological Evaluation of Fuels and Lubricants |
| Compliance | ASTM D6079, ISO 12156-1, SH/T 0765, EN 590, JPI-5S-50-9, IP 450 |
| Load Range | 0–1.0 kg |
| Frequency Range | 1–300 Hz |
| Stroke Amplitude | 0.005–2 mm |
| Operating Temperature | Ambient to +200 °C |
| Test Mode | Boundary Lubrication Assessment under Oscillatory Sliding Conditions |
| Brand | SOLGE |
|---|---|
| Origin | South Korea |
| Model | VARTECTOR |
| Application | ASTM D7843-compliant film potential analysis of phosphate ester fire-resistant hydraulic fluids (EHC systems) |
| Measurement Principle | Reflectance-based colorimetric quantification of deposited insolubles on membrane filters using CIE L*a*b* color space |
| Compliance | Fully aligned with ASTM D7843–21 “Standard Test Method for Quantifying Potential for Insoluble Formation in Phosphate Ester Fluids” |
| Automation Level | Fully automated load control, optical measurement, system verification, and diagnostic reporting |
| Data Output | ΔE, ΔL*, a*, b* values |
| Brand | ECH |
|---|---|
| Origin | Germany |
| Model | aqua 40.00 |
| Measurement Range | 1 µg – 100 mg |
| Resolution | 0.1 µg |
| Repeatability | ±3 µg (for 10–1000 µg water) |
| Temperature Control Range | 35 °C – 300 °C |
| Power Supply | 230 V |
| Sample Introduction | Optional automated sample changer |
| Gas System | Closed-loop, carrier-gas-free dynamic headspace |
| Compliance | Designed for GLP/GMP environments with audit-trail-capable software support |
| Brand | Rtec |
|---|---|
| Origin | USA |
| Model | BOR-3000 |
| Load Capacity | Up to 3000 N |
| Rotational Speed Range | 0.1–5000 rpm (0.1 rpm resolution) |
| Temperature Range | Ambient to +200 °C |
| Optional Low-Temp Control | −40 °C to +200 °C |
| Optional High-Temp Control | Ambient to +500 °C |
| Test Standards Compliance | ASTM G77, ASTM D2509, ASTM D2714, ASTM D2782, ASTM D2981, ASTM D3704, SH/T 0203, GB/T 11144 |
| Brand | CINRG |
|---|---|
| Origin | Canada |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | CS-APC-2 |
| Product Category | Laboratory Instrument |
| Test Parameter | Contaminant Particles |
| Compliance | ASTM D7647-10 |
| Sample Processing Time | 4–5 min/sample |
| Solvent Consumption | 40 mL/sample |
| Autosampler Capacity | 102 samples (104-position tray |
| Sensor Model | KLOTZ LDS 45/50 Laser Sensor |
| Measurement Range | 1.5 µm – 100 µm |
| Flow Rate | 30 mL/min (calibrated) |
| Detection Thresholds | 25,000 particles/mL at ≥4 µm (neat oil), 50,000 particles/mL at ≥4 µm (1:1 dilution) |
| Volume Accuracy | ±2% (pre-dilution) |
| Customizable Reporting | User-defined pass/fail limits at 4 µm, 6 µm, and 14 µm |
| Data Export Fields | Solvent blank count, sample volume, dilution ratio, raw particle counts per channel |
| Brand | ECH |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Aquamax KF PRO OIL |
| Product Type | Laboratory Instrument |
| Measurement Parameter | Trace Water Content (ppm to %) |
| Compliance | ASTM D6304, GB/T 11133 |
| Measurement Range | 0.0001–99% w/w |
| Heating Temperature Range | 35–250 °C (isothermal or programmable ramp) |
| Sample Introduction | Direct injection into heated furnace |
| Carrier Gas | Not required (closed-loop system) |
| Reagent Consumption | Single reagent cartridge supports >1000 determinations |
| Water Speciation | Differentiates free water and chemically bound water via thermal profiling |
| Blank-Free Operation | Eliminates need for blank correction |
| Form Factor | Benchtop / Portable field unit |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Model | OilWear S120 |
| Product Type | Online Instrument |
| Detection Target | Solid Contaminants & Degradation Indicators |
| Particle Size Range | ≥4 µm |
| Source Discrimination Capability | ≥20 µm (size + shape-based classification) |
| Compliance Standards | ISO 4406, SAE AS4059, NAS 1638 |
| Communication Interfaces | Analog (4–20 mA), Digital (RS-485, Modbus RTU), PLC/SCADA/PC Compatible |
| Self-Calibration & Diagnostics | Yes |
| Configurable Alarm Thresholds | Yes |
| Integrated Oil Health Monitoring | Compatible with Atten2 OilHealth Platform |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Model | OiHealth PROBE |
| Product Type | Online Instrument |
| Voltage | 24 V DC |
| Current Consumption | <200 mA |
| Digital Outputs | RS485 (Modbus RTU), Ethernet RJ45 (Modbus TCP/IP, FTP, Telnet) |
| Maximum Operating Pressure | 5 bar |
| Viscosity Range | 0–460 cSt |
| Operating Temperature | −20 °C to +80 °C |
| Ingress Protection | IP65 |
| Hydraulic Connection | 1/2″ BSP |
| Certifications | CE, GL Class pending |
| Detection Principle | Optical Absorption & Scattering Spectroscopy |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Model | OilMoisture |
| Product Type | Online Instrument |
| Detection Parameter | Water Content |
| Compliance Standard | ASTM D6304 |
| Sensitivity | ppm-level |
| Power Supply | 24 V DC, <100 mA |
| Output Interface | Modbus RTU (RS-485) |
| Max Operating Pressure | 12 bar |
| Operating Temperature Range | 0–80 °C |
| Viscosity Compatibility | up to 680 cSt |
| Housing Material | Aluminum (stainless steel optional) |
| Optical Window | BK7 glass |
| Sealing Material | Fluoroelastomer (FKM) |
| Ingress Protection | IP65 |
| Certification | CE |
| Brand | Atten2 |
|---|---|
| Origin | Spain |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Atten2 SMK Smart Oil Filtration Kit |
| Product Type | Online Monitoring Instrument |
| Measured Parameters | Particle Contamination, Air Bubble Content, Foam Inhibitor Condition, Optional Water Content |
| Compliance Standards | ISO 4406:2017, SAE AS4059F, NAS 1638 Class |
| Power Supply | 24 V DC, <250 mA |
| Particle & Bubble Count Output | ISO Code, p/mL, b/mL |
| Volumetric Flow Visualization | L/min |
| Optional Humidity Sensor (Water-in-Oil) | ppm |
| Digital Interface | Local Display + Ethernet RJ45 (IP, FTP, Telnet) |
| Max Operating Pressure | 20 bar |
| Operating Temperature Range | 0–80 °C |
| Kinematic Viscosity Range | 0–540 cSt |
| Counting Accuracy | ±1 ISO Code |
| Enclosure Rating | IP65 |
| Brand | atten2 |
|---|---|
| Origin | Spain |
| Model | OilCMS |
| Instrument Type | Online Lubricant Condition Monitor |
| Detection Parameters | Particle Contamination, Water Content (RH%), Oil Degradation State, Viscosity Estimation (up to 3000 cSt) |
| Compliance Standards | ISO 4406, SAE AS4059, NAS 1638 |
| Display | 10-inch capacitive touchscreen |
| Power | Integrated rechargeable lithium battery |
| Data Storage | Local database for up to 500 oil samples with trend aggregation |
| Flow Control | Built-in motorized pump with optional high-pressure adapter (compatible with real-time recirculation systems up to 350 bar) |
| Particle Analysis Method | Digital imaging with bubble suppression and morphological classification |
Show next