Soil Detector
Filter
Showing 211–240 of 499 results
| Brand | IMKO |
|---|---|
| Origin | Germany |
| Manufacturer | IMKO GmbH |
| Model | TRIME-PICO-IPH50 |
| Instrument Type | TDR-Based Soil Moisture & EC Profiler |
| Depth Range | Up to 50 m |
| Sensor Principle | Time-Domain Reflectometry (TDR) at 1 GHz |
| Probe Diameter | 50 mm |
| Measurement Volume | 3 L (200 mm × Ø150 mm) |
| Moisture Range | 0–100% vol. |
| EC Range | 0–6 dS/m (standard), extended up to >50 dS/m with material-specific calibration |
| Moisture Accuracy | ±2% (0–40%), ±3% (40–70%) |
| Repeatability | ±0.3% |
| Temperature Drift | ±0.3% / °C |
| Operating Temp. | −15 °C to +50 °C (customizable) |
| Cable Length | Customizable, up to 50 m |
| Calibration | Factory-calibrated for mineral soils |
| Power Supply | 7–24 VDC (probe) |
| Bluetooth module | 1000 mAh Ni-MH battery (≥1500 measurements per charge) |
| HD2 reader | 4.8 VDC, 2000 mAh (≥5000 measurements) |
| Enclosure Rating | IP67 (HD2 reader) |
| Communication | Bluetooth 2.0 (10 m range), compatible with Android/iOS smartphones and Windows CE PDAs |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TRIME-PICO64/32 |
| Pricing | Upon Request |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | IQ150 |
| Price | USD 2,200 (FOB) |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | iSCAN |
| Price Range | USD 14,000 – 28,000 |
| Brand | Jingcheng Huatai |
|---|---|
| Origin | Beijing, China |
| Model | HTY-203 |
| Sampling Depth | 10 m |
| Core Diameter | 5 cm |
| Core Length | 30 cm |
| Configuration | T-handle, 9 × 100 cm extension rods, 2 × 50 cm extension rods, depth-controlled peat coring bit, scraper, 2 wrenches, brush, 3 m steel tape measure, gloves, aluminum carrying case |
| Brand | Jingcheng Huatai |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HTY-203 |
| Sampling Depth | 10 m |
| Core Diameter | 5 cm |
| Core Length | 30 cm |
| Configuration | T-handle, 9 × 100 cm extension rods, 2 × 50 cm extension rods, fixed-depth peat coring bit, scraper, 2 wrenches, brush, 3 m steel tape measure, gloves, aluminum carrying case |
| Brand | Jingcheng Huatai |
|---|---|
| Origin | Beijing, China |
| Model | HTYF-DT1-A |
| Operating System | Android 8.1 |
| Display | 7-inch capacitive touchscreen |
| Detection Channels | 6 |
| Wavelength Range | 420–680 nm (±2 nm per band) |
| Optical Path | 1 cm cuvette |
| Repeatability Error | ≤0.02% (K₂Cr₂O₇ solution) |
| Stability | Drift ≤0.3% in 60 min (transmittance), ≤0.001 absorbance unit in 60 min |
| Linearity Error | ≤0.1% (CuSO₄) |
| Sensor Output | Simultaneous in-situ measurement of 33 parameters including pH, EC, moisture, temperature, CEC, and elemental concentrations (N, P, K, Ca, Mg, S, Fe, Mn, B, Zn, Cu, Cl, Si, Mo, Se, Pb, As, Cd, Cr, Hg, Ni, Al, Ti, F) |
| Power Supply | AC 220 V ±10% / DC 12 V (internal Li-ion battery) |
| Power Consumption | ≤10 W |
| Data Storage | 4 GB internal memory |
| Connectivity | USB, Ethernet, 4G LTE, Wi-Fi |
| Compliance | Designed to support ISO 11260, ISO 14253-1, ASTM D5088, and GLP-aligned data integrity workflows |
| Brand | Jingcheng Huatai |
|---|---|
| Origin | Beijing, China |
| Model | TJSD-A |
| Measurement Range | 0–10,000 kPa |
| Depth Range | 0–450 mm |
| Accuracy | ±1% |
| Resolution | 0.1 kPa |
| Display | Touchscreen (Bilingual: English/Chinese) |
| Data Storage | 100 measurement sets |
| Interface | DB9 serial port |
| Power | 3.7 V Li-ion battery (10 h operation) |
| Operating Temperature | −10 °C to +60 °C |
| Weight | 12.9 kg |
| GPS Integration | Built-in GNSS module for georeferenced depth-compaction profiling |
| Software Compatibility | PC-based data management with curve plotting, spatial mapping, and report generation (PDF/CSV export) |
| Brand | Ju Chuang Environmental |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JC-803B |
| Price | USD 520 (FOB) |
| Sampling Depth | Up to 2.0 m |
| Standard Drill Bit Diameters | 3.0–10.0 cm |
| Extension Rods | 0.3 m, 0.6 m, and 1.0 m (one each) |
| Core Tools | Sand, Clay, Rocky, Slurry, and Auger Drill Bits |
| Sample Containers | 100 fabric sample bags, 100 PVC sample bags, 20 organic-compatible glass vials (in box), plus aluminum transport case |
| Accessories | T-handle, scrapers, wrenches, steel tape measure, gloves, brush, towel, core connectors, and disassembly tools |
| Brand | Ju Chuang Environmental |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | JC-ZP01S |
| Instrument Type | Multi-Nutrient Fertilizer & Soil Analyzer |
| Detection Range | N: 5–500 mg/kg, P: 2–200 mg/kg, K: 10–600 mg/kg |
| Detection Capability | Simultaneous quantification of nitrogen (N), phosphorus (P), and potassium (K) in soil and fertilizer samples |
| Display | 5.1-inch backlit LCD with Chinese character interface |
| Power Supply | AC 220 ± 22 V / DC 7.5 V (optional built-in rechargeable Li-ion battery) |
| Power Consumption | ≤6 W |
| Repeatability Error | ≤0.5% |
| Linearity Error | ≤3% |
| Optical Sensitivity | Red light ≥4.5 × 10⁻⁵, Blue light ≥3.17 × 10⁻³ |
| Wavelength Accuracy | Red: 620 ± 4 nm, Blue: 440 ± 4 nm |
| Data Storage | ≥1,000 test records with timestamp, sample ID, crop type, yield target, and recommended application rate |
| Output | Built-in thermal printer for on-site report generation (test parameters, date/time, crop-specific fertilizer recommendations, dosage in kg/ha) |
| Sample Throughput | Single soil NPK analysis ≤15 min |
| Operating Environment | Field-deployable portable design |
| Control System | Embedded microcomputer with touch-sensitive keypad interface |
| Compliance | Designed for routine agricultural laboratory and extension service use |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported Instrument |
| Model | K-SAT |
| Instrument Type | Soil Moisture / Matric Potential Analyzer |
| Ksat Measurement Range | 0.01–5000 cm/d |
| Ceramic Plate Ksat | 20,000 cm/d |
| Measurement Accuracy | ±2% |
| Pressure Sensor Accuracy | ±1 Pa |
| Temperature Sensor Accuracy | ±0.2 °C |
| Sample Volume | 250 mL |
| Ring Sampler Dimensions | 50 mm height × 80 mm internal diameter |
| Origin | USA |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | Ksat |
| Instrument Type | Soil Moisture / Matric Potential Analyzer |
| Measurement Range | 0.01–5000 cm/d |
| Ceramic Plate Permeability | 20,000 cm/d |
| Accuracy | ±2% |
| Pressure Sensor Resolution | 1 Pa |
| Temperature Sensor Accuracy | ±0.2 °C |
| Sample Volume | 250 mL |
| Core Sampler Dimensions | 50 mm height × 80 mm internal diameter |
| Brand | LANENDE |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | Domestic (China) |
| Model | LD-JSD-3 Smart |
| Instrument Type | Handheld |
| Measurement Accuracy | ±0.1 %F·S |
| Operating Temperature Range | 0–40 °C |
| Processor Architecture | ARM Cortex-M3 |
| Operating System | Android-based firmware |
| Connectivity | Wi-Fi, GPS, GPRS (optional), USB-C interface |
| Display | 3.5-inch color touchscreen |
| Data Storage Capacity | Up to 5 million records |
| Data Export Format | CSV/Excel-compatible |
| Power Interface | Standard USB-C charging |
| Sensor Output | Real-time penetrometer force (N) and depth (mm) |
| Brand | LANENDE Intelligent Technology |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LD-TPHn |
| Instrument Type | Portable |
| Functionality | Multi-parameter Soil Analyzer |
| pH Range | 0–14 |
| pH Resolution | 0.01 |
| pH Accuracy | ±0.1 |
| Dimensions | 204 × 100 × 36 mm (L × W × H) |
| Weight | 0.3 kg |
| Data Storage Capacity | 300,000 records |
| Display | Full-color LCD |
| Connectivity | USB + 4G cellular uplink |
| Software | Free PC-based data management suite with Excel export, curve plotting, and threshold-based color-coded alerting |
| Brand | Lanjing |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LJ-PF1000 |
| CO₂ Range | 0–2000 ppm (customizable) |
| CH₄ Range | 0–100 ppm (customizable) |
| H₂O Range | 0–6% |
| CO₂ Precision | ±0.1 ppm @ 1 Hz |
| CH₄ Precision | ±10 ppb @ 1 Hz |
| H₂O Accuracy | ±1.5% of reading |
| Temperature Accuracy | ±0.1 °C (20–60 °C) |
| Sampling Flow Rate | 1 L/min (adjustable) |
| Chamber Dimensions | Ø220 mm × 120 mm H |
| Chamber Volume | 3140 cm³ |
| Battery Life | 8 hours (Li-ion) |
| Operating Temp. | −30 to +60 °C |
| Operating Humidity | <99% RH (non-condensing) |
| Weight | <10 kg |
| Data Output | Real-time flux & respiration rate calculation |
| Connectivity | Wi-Fi, BeiDou/GPS dual-mode (optional) |
| Expandability | 预留RS485, analog, and digital I/O ports for optional sensors (PAR, soil T/RH, anemometer, 4G telemetry) |
| Brand | LANYO |
|---|---|
| Origin | Beijing, China |
| Model | RT-S100 |
| Sampling Depth | 0–10 m |
| Host Weight | 20 kg |
| Core Diameter | 36 mm |
| Outer Diameter | 51 mm |
| Inner Diameter (Sampler Tube) | 41 mm |
| Vibration Frequency | 1720 cycles/min |
| Power Source | 1.6 HP gasoline engine |
| Fuel Consumption | 0.6 L/h |
| Sampling Rate | ≥1.1 m/min |
| Sample Recovery Rate | >97% |
| Sampling Method | Vertical impact-driven coring with single-use inner liner |
| Extraction Mechanism | Integrated hydraulic + mechanical extraction assist |
| Transport Configuration | Wheeled mobile cart assembly |
| Brand | LANYO |
|---|---|
| Origin | Beijing, China |
| Model | RT-S300 |
| Sampling Depth | 0–15 m (up to 20 m in soft soils) |
| Host Weight | 27 kg |
| Sampling Method | Hydraulic Impact |
| Core Diameter | 36 mm |
| Outer Diameter | 51 mm |
| Sample Recovery Rate | >97% |
| Hammering Frequency | 1400 bpm |
| Hydraulic Oil Capacity | 6.5 L |
| Pull-Out Force | 16.5 tonnes |
| Sampling Speed | up to 1.5 m/min |
| Sampling Principle | Single-Use Liner-Based Impact Coring |
| Mobility | Integrated Wheeled Cart System |
| Compliance | Designed for ASTM D1586, ISO 22475-1, and GB/T 50123-2019 soil sampling protocols |
| Brand | LESHI |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Soil GHG Analyzer |
| Price Range | USD 210,000 – 350,000 |
| Channel Capacity | 24 independent sampling ports |
| Operating Temperature | Ambient (10–35 °C) |
| Target Gases | N₂O, CH₄, CO₂, CO, C₁–C₆ hydrocarbons, aromatic & cyclic hydrocarbons, carboxylic acids & derivatives, aldehydes, ketones |
| Measurement Mode | Real-time, sequential multi-point gas chromatography with integrated thermal desorption and PID/FID detection modules |
| Brand | LI-COR |
|---|---|
| Origin | USA |
| Model | 8200-01 |
| Chamber Diameter | 20 cm |
| Soil Area | 317.8 cm² |
| Chamber Volume | 4244.1 cm³ |
| Air Temperature Sensor Range | −20 to 70 °C, Accuracy: ±0.5 °C (0–70 °C) |
| Pressure Sensor Range | 50–110 kPa, Accuracy: ±0.4 kPa, Resolution: 1.5 Pa (typ.) |
| Operating Temperature | −20 to 50 °C |
| Power Supply | 10–17 VDC |
| Battery | 4S Li-ion, 98 Wh, built-in protection |
| Battery Life | 34 h (standalone), 20 h (with LI-870 CO₂/H₂O analyzer) |
| Soil Thermocouple Port | compatible with 6000-09TC, cable length: 1.2 or 2 m |
| Weight | 4.3 kg (incl. battery) |
| Onboard Memory | 8 GB (OS + data) |
| GPS Accuracy | 2.5 m CEP |
| Wi-Fi | 2.4 GHz, IEEE 802.11a/b/g/n/ac |
| SDI-12 Interface | for Stevens HydraProbe (optional) |
| Connectivity | USB-A (LI-870), USB-B (non-LI-COR analyzers), RJ-45 Ethernet (LI-COR trace gas analyzers), USB-A (external Wi-Fi adapter) |
| Brand | LI-COR |
|---|---|
| Origin | USA |
| Model | LI-7810 |
| Measurement Principle | Optical Feedback–Cavity Enhanced Absorption Spectroscopy (OF-CEAS) |
| Gases Measured | CH₄, CO₂, H₂O |
| Detection Limits | Sub-ppb CH₄, <0.1 ppm CO₂, <0.01% RH H₂O |
| Power Requirement | 12–24 V DC (LI-7810) |
| Operating Temperature | –25 to 45 °C |
| Communication | Ethernet, Wi-Fi, Bluetooth (8200-01S), USB, RS-232 |
| Data Output | Real-time flux calculations (CH₄ & CO₂), soil temperature & moisture (via optional sensors), diagnostic logs |
| Compliance | Designed for GLP-compliant field deployment |
| Brand | LI-COR |
|---|---|
| Origin | USA |
| Model | LI-7815 |
| Measurement Principle | Optical Feedback–Cavity Enhanced Absorption Spectroscopy (OF-CEAS) |
| Measurement Frequency | 1 Hz |
| Cavity Volume | 6.41 cm³ |
| Sample Flow Rate | 250 sccm (standard mL/min) |
| CO₂ Range | 0–10,000 µmol/mol |
| CO₂ Precision (1σ) | 0.04 µmol/mol @ 400 µmol/mol (5-s average), 0.10 µmol/mol @ 400 µmol/mol (1-s average) |
| CO₂ Drift | < 0.2 µmol/mol per 24 h |
| H₂O Range | 0–60,000 µmol/mol |
| H₂O Precision (1σ) | 20 µmol/mol @ 10,000 µmol/mol (5-s average), 45 µmol/mol @ 10,000 µmol/mol (1-s average) |
| Response Time (T₁₀–T₉₀) | ≤2 s for CO₂ (0 → 400 µmol/mol) |
| Operating Temperature | −25 °C to +45 °C (non-direct-sunlight ambient) |
| Operating Humidity | 0–85 % RH (non-condensing, ambient) |
| sample line | 0–99.9 % RH (non-condensing) |
| Pressure Range | 70–110 kPa (high-altitude mode: 50–110 kPa) |
| Power Consumption | 22 W @ 25 °C (steady state) |
| AC Input | 100–240 VAC, 50–60 Hz |
| Battery Runtime | ~8 h with two standard batteries |
| Weight | 10.5 kg (including battery) |
| Dimensions (L×H×W) | 51 × 33 × 18 cm |
| Connectivity | Ethernet and Wi-Fi (2.4 GHz, IEEE 802.11 a/b/g/n/ac) |
| Onboard Data Storage | Up to 3 months of 1-Hz data |
| Internal Web Server | Yes (accessible via browser over wired or wireless network) |
| Brand | LI-COR |
|---|---|
| Origin | USA |
| Model | LI-7820 |
| Measurement Principle | Off-axis Cavity-Enhanced Absorption Spectroscopy (OF-CEAS) |
| N₂O Range | 0–100 ppm |
| N₂O Precision (1σ) | 0.05 ppb @ 330 ppb (60-s avg) |
| N₂O Response Time (T₁₀–T₉₀) | ≤2 s |
| H₂O Range | 0–60,000 ppm |
| H₂O Precision (1σ) | 5 ppm @ 10,000 ppm (60-s avg) |
| Measurement Frequency | 1 Hz |
| Optical Cavity Volume | 6.41 cm³ |
| Sample Flow Rate | 250 sccm (standard) |
| Operating Temperature | –25 to 45 °C |
| Operating Humidity | 0–85% RH (non-condensing, no direct solar exposure) |
| Sampling Line Humidity Tolerance | 0–99.9% RH (non-condensing) |
| Pressure Range | 70–110 kPa (extended mode: 50–110 kPa) |
| Power Consumption | 22 W (steady-state, 25 °C) |
| Battery Runtime | ~8 h (dual battery configuration) |
| Weight | 10.5 kg (incl. batteries) |
| Dimensions | 51 × 33 × 18 cm (L×W×H) |
| Connectivity | Ethernet, Wi-Fi (2.4 GHz, 802.11 a/b/g/n/ac) |
| Compliance | Designed for field-deployable GLP-aligned workflows |
| Brand | LI-COR |
|---|---|
| Origin | USA |
| Model | LI-8100A |
| Status | Discontinued (Replaced by LI-870 Portable Soil CO₂ Flux System) |
| Regulatory Compliance | ASTM D6573, ISO 16634-2, USDA-NRCS Soil Gas Flux Protocols |
| Brand | LI-COR |
|---|---|
| Origin | USA |
| Model | LI-8150 |
| Dimensions (L×W×H) | 40.6 × 57.2 × 21.1 cm |
| Enclosure Rating | IP55 |
| Weight | 9.4 kg (8-channel), 11.2 kg (16-channel) |
| Operating Temperature | −20 to +45 °C |
| Relative Humidity Range | 0–95% RH (non-condensing) |
| Max. Radius from Multiplexer to Chamber | 15.0 m |
| Gas Flow Rate (to/from chamber) | 3.0 L/min |
| Inter-unit Flow (LI-8150 ↔ LI-8100A) | 2.0 L/min |
| Power Input | 10.5–14.5 V DC |
| Soil Temperature Sensor Accuracy | ±1.0 °C (−20 to +50 °C) |
| Power Delivery | Supplies regulated power to connected LI-8100A analyzer |
| Brand | LI-COR |
|---|---|
| Origin | USA |
| Model | LI-8250 |
| Gas Analyzers Supported | LI-7810 (CH₄/CO₂/H₂O) or LI-870 (CO₂/H₂O) |
| Max Channels | 36 (via 8250-01 expansion modules) |
| Chamber Types | 8200-104 (opaque) or 8200-104C (transparent) |
| Data Storage | 8 GB internal |
| Operating Temperature | –20 to 45 °C |
| Humidity Range | 0–95% RH (non-condensing) |
| Enclosure Rating | IEC IP55 |
| Power Input | 10–30 VDC |
| Wi-Fi | 2.4 GHz, 802.11 a/b/g/n/ac |
| GPS Accuracy | 2.5 m CEP |
| Max Chamber Radius | 15.0 m (single line), 30.0 m (with 8250-01) |
| Pressure Sensor Range | 20–110 kPa (±0.4 kPa accuracy) |
| Flow Rate to Chambers | ~2–3 L/min |
| Software | SoilFluxPRO™ |
| Brand | LI-COR |
|---|---|
| Origin | USA |
| Model | LI-8250 |
| Dimensions | 38.5 × 52 × 18.5 cm |
| Weight | 7.7 kg |
| Enclosure Rating | IP55 |
| Operating Temperature | –20 to 45 °C |
| Relative Humidity | 0–95% RH (non-condensing) |
| Data Storage | 8 GB internal |
| GPS Accuracy | 2.5 m CEP |
| Max Chamber Radius from LI-8250 | 15.0 m |
| Pump Flow Rate | ~2–3 L/min (diaphragm type) |
| Barometric Pressure Sensor Range | 20–110 kPa |
| Accuracy | ±0.4 kPa (50–110 kPa) |
| Resolution | 0.006 kPa |
| Power Input | 10–30 VDC |
| Typical Power Consumption (LI-8250) | 4.8 W (standby), 15.6 W (sampling/movement), 18.2 W (max) |
| Communication | 3× sealed RJ-45 Ethernet, Wi-Fi (2.4 GHz, 802.11 a/b/g/n/ac), USB-A (1× sealed for LI-870, 2× standard), RS-422 output (24 VDC, 115200 baud) |
| Chamber Compatibility | SDI-12 interface support for 8200-104 / 8200-104C long-term chambers (up to 8 units) |
| Brand | LI-COR |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Import Status | Imported |
| Model | LI-870 |
| Price Range | USD 52,000–65,000 |
| Brand | LI-COR |
|---|---|
| Origin | USA |
| Model | LI-870 |
| CO₂ Range | 0–20,000 µmol/mol |
| H₂O Range | 0–60 mmol/mol |
| CO₂ & H₂O Accuracy | ±1.5% of reading |
| Measurement Frequency | 1 Hz |
| Dimensions (Analyzer) | 28.4 × 27.9 × 12.4 cm |
| Weight (Analyzer) | 2.31 kg |
| Operating Temperature | −20 to +45 °C |
| Relative Humidity | 0–95% RH (non-condensing) |
| Pressure Range | 50–110 kPa |
| Flow Rate | 0.75 L/min |
| Power Input | 10–17 VDC, max 2 A |
| Battery Life | Up to 20 h (with two batteries) |
| Measurement Principle | NDIR (Non-Dispersive Infrared) |
| Chamber | 8200-01S Smart Chamber (integrated GPS, Wi-Fi, SoilFluxPro™ software, pressure-balanced venting, bowl-shaped design, active air mixing) |
| Brand | LICA |
|---|---|
| Model | PS-9000 |
| Measurement Principle | Dynamic Closed-Chamber Method (NDIR-based) |
| CO₂ Range | 0–6000 ppm |
| H₂O Range | 0–60000 ppm |
| Accuracy | <1% of reading |
| Repeatability | <1 ppm |
| Operating Temperature | −20 to +60 °C |
| Power Consumption | <40 W (controller), <2.2 W (SC-12N chamber) |
| Battery | 24 V / 8 Ah Li-ion |
| Runtime | 3–4 h per charge |
| Dimensions (controller) | 37 × 30 × 16 cm |
| Weight (controller, with battery) | 6.8 kg |
| Chamber Type | SC-12N portable soil respiration chamber |
| Chamber Area | 276.27 cm² |
| Chamber Volume | 3451 cm³ |
| Cable Length | 2 m |
| Soil Sensor | Volumetric Water Content (0.00–0.70 m³/m³ in mineral soils |
| 0.0–1.0 m³/m³ in substrates), Temp Range | −40 to +60 °C, Temp Accuracy: ±1 °C (−40 to 0 °C), ±0.5 °C (0 to 60 °C) |
| Communication | Wi-Fi, RS-232, SDI-12 |
| Data Storage | microSD card |
| Flow Rate | 3 L/min |
| Pump Supply | 12 V, <0.5 A |
| Brand | LICA |
|---|---|
| Model | PS-9600 |
| Measurement Principle | Cavity Ring-Down Spectroscopy (CRDS) |
| Simultaneous Target Gases | CH₄, CO₂, H₂O |
| Precision (1σ, 10 s / 100 s) | CH₄ ≤1.2 ppb / 0.6 ppb |
| Measurement Ranges | CH₄ 0–100 ppm (R² ≥ 0.9998) |
| Operating Temperature | −20 °C to +50 °C |
| Power Consumption | ≤35 W |
| Dimensions (Analyzer) | 55.38 × 35.5 × 19 cm |
| Weight (Analyzer) | 9 kg |
| SC-12 Chamber Dimensions | 27.5 × 24.5 × 44.5 cm |
| Chamber Footprint | 276.27 cm² |
| Chamber Actuation Time | ≤10 s |
| Chamber Weight | 4.05 kg |
| Data Storage | SD card |
| Communication Interfaces | RS-232, SDI-12, Wi-Fi |
| Battery | Dual rechargeable Li-ion packs included |
| Control Interface | Native Android/iOS mobile application |