Vacuum Pumps
Filter
Showing 181–210 of 630 results
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Works GmbH & Co. KG |
| Type | Oil-Free Diaphragm Vacuum Pump |
| Pumping Speed | 1.32 m³/h (22 L/min) |
| Ultimate Vacuum | 2 mbar |
| Dimensions | 270 × 435 × 500 mm |
| Weight | 11.5 kg |
| Motor Power | 140 W |
| Pressure Sensor | Ceramic Al₂O₃, Range 1–1030 mbar, Accuracy ±1 mbar |
| Control Interface | TFT Display, Rotary Knob, RS232 & USB |
| Inlet/Outlet Port | 8 mm |
| IP Rating | IP20 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % RH |
| Noise Level | 54 dB(A) |
| Materials in Contact | PTFE, FPM, PPS, Al₂O₃ |
| Compliance | DIN EN 60529, CE, RoHS |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Type | Oil-Free Diaphragm Vacuum Pump |
| Model | VACSTAR digital |
| Pumping Speed | 1.32 m³/h (22 L/min) |
| Ultimate Vacuum | 2 mbar (without gas ballast) |
| Dimensions (W × D × H) | 150 × 375 × 370 mm |
| Weight | 11.5 kg |
| Motor Power | 130 W |
| Noise Level | 54 dB(A) at low vacuum |
| Speed Range | 285–1200 rpm |
| Inlet/Outlet Port Diameter | 8 mm |
| Enclosure Rating | IP20 |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Interface | RS232 and USB |
| Operating Temperature | 5–40 °C |
| Max. Relative Humidity | 80 % (non-condensing) |
| Materials in Contact | Al₂O₃, PTFE, FFKM (FFPM), PPS, NBR |
| Control Modes | Manual, Auto, %-based, Program |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Oil-Free Diaphragm Pump |
| Pumping Speed | 1 m³/h (16.67 L/min at 50/60 Hz) |
| Ultimate Pressure (without gas ballast) | 9 mbar |
| Operating Input Pressure Range | 10–1030 mbar |
| Speed Range | 285–1100 rpm |
| Rated Speed | 1100 rpm |
| Noise Level (low vacuum) | 54 dB(A) |
| Dimensions (W×D×H) | 115 × 292 × 280 mm |
| Weight | 8.5 kg |
| Power Supply | 100–240 V, 50/60 Hz |
| Rated Power Consumption | 120 W |
| Standby Power | 1.5 W |
| Enclosure Protection | IP20 (DIN EN 60529) |
| Wetted Materials | Al₂O₃, PTFE, FFKM (FFPM), PPS, NBR |
| Housing Material | Cast aluminum with thermoplastic polymer coating |
| Ambient Temperature Range | 5–40 °C |
| Max. Relative Humidity | 80% @ ≤31 °C, linearly decreasing to 50% @ 40 °C |
| Interfaces | USB-C, Analog Input (0–10 V) |
| Display | LED line display |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Oil-Free Diaphragm Pump |
| Pumping Speed | 1 m³/h (16.67 L/min) |
| Ultimate Pressure (without gas ballast) | 9 mbar |
| Operating Speed Range | 285–1100 rpm |
| Noise Level at Low Vacuum | 54 dB(A) |
| Dimensions (W×D×H) | 115 × 292 × 280 mm |
| Weight | 8.5 kg |
| Power Input | 120 W (100–240 V, 50/60 Hz) |
| Standby Power | 1.5 W |
| Enclosure Rating | IP20 |
| Materials in Contact | Al₂O₃, PTFE, FFKM (FFPM), PPS, NBR |
| USB-C Interface | Yes |
| Analog Input | Yes |
| Ambient Temperature Range | 5–40 °C |
| Max. Relative Humidity | 80% @ 31 °C (linearly decreasing to 50% @ 40 °C) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Vacuum Controller for Laboratory Vacuum Systems |
| Model | VC 10 lite |
| Control Interface | Manual + Programmable (10 user-defined programs, 10-step pressure/time profiles) |
| Pressure Range (absolute) | 1–1100 mbar |
| Pressure Accuracy | ±1 mbar |
| Sensor Type | Ceramic Al₂O₃ capacitive pressure sensor |
| Display | TFT screen with selectable units (mbar, hPa, mmHg, Torr) |
| Communication | USB (Type A to Micro-B, 2 m), RS 232 |
| Chiller Control Output | Yes (24 V DC, 1 A) |
| Solvent Database | Integrated |
| Auto-Cleaning Function | Yes |
| Vent Valve | Integrated, inert gas purging capability |
| VENT Key | Dedicated anti-bumping safety function |
| Vacuum Leakage Test | Built-in diagnostic routine |
| Enclosure Rating | IP20 (DIN EN 60529) |
| Operating Ambient | 5–40 °C, ≤80 % RH |
| Dimensions (W×H×D) | 95 × 150 × 110 mm |
| Weight | 1.284 kg |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Max. Input Power | 24 W |
| Standby Power | 2 W |
| Materials in Contact | Al₂O₃, PTFE, FPM, PPS |
| Housing Material | PBT |
| Mounting | 16 mm clamp bracket |
| Compliance | CE, RoHS, EMC Directive 2014/30/EU |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | VC 10 pro |
| Instrument Type | Vacuum Controller |
| Product Type | Oil-Free Pump Controller |
| External Dimensions | 95 × 150 × 110 mm |
| Weight | 1.5 kg |
| Pressure Measurement Range (Absolute) | 1–1100 mbar |
| Pressure Display Accuracy | ±1 mbar |
| Temperature Input Support | PT1000 sensor (−10 to 200 °C, accuracy ±1 K) |
| Control Modes | Automatic, Manual, Pump %, Program (10 programs × 10 segments) |
| Communication Interfaces | RS232, USB |
| Chiller Control | Yes |
| Vacuum Leakage Test Function | Yes |
| Enclosure Rating | IP20 |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Max Input Power | 24 W |
| Standby Power | 2 W |
| Material Contacting Media | Al₂O₃, PTFE, FPM, PPS |
| Housing Material | PBT |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Model | P12Z-301 |
| Pump Type | Diaphragm–Rotary Vane Hybrid Vacuum Pump |
| Ultimate Vacuum | <2×10⁻³ mbar |
| Pumping Speed | 11 m³/h |
| External Dimensions (W×D×H) | 590 × 345 × 420 mm |
| Weight | 42.5 kg |
| Motor Power | 900 W |
| Oil Capacity | 1400 mL |
| Electrical Supply | 230 V, 50 Hz |
| Inlet Port | DN 25 KF |
| Oil-Lubricated Rotary Vane Stage | Yes |
| Chemical Resistance | Enhanced via Integrated Corrosion-Resistant Diaphragm Stage |
| Steam Tolerance | High |
| Safety Features | Integrated Pressure Relief Valve, Oil Aeration Bubble Device, Liquid–Gas Separation Bottle |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Pump Type | Hybrid (Rotary Vane + Chemically Resistant Diaphragm) |
| Model | P23Z-301 |
| Ultimate Vacuum | < 2 × 10⁻³ mbar |
| Pumping Speed | 21 m³/h |
| Motor Power | 900 W |
| Dimensions (W × D × H) | 590 × 345 × 420 mm |
| Weight | 46 kg |
| Oil Capacity | 1000 mL |
| Electrical Supply | 230 V, 50 Hz |
| Inlet Port | DN 25 KF |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Model | P6Z-101 |
| Pump Type | Hybrid (Rotary Vane + Chemically Resistant Diaphragm) |
| Ultimate Vacuum | <2×10⁻³ mbar |
| Pumping Speed | 5.8 m³/h |
| Dimensions (W×D×H) | 500×330×340 mm |
| Weight | 25.5 kg |
| Motor Power | 400 W |
| Oil Capacity | 1000 mL |
| Electrical Supply | 230 V, 50 Hz |
| Inlet Port | DN 16 KF |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | <8 mbar (abs) |
| Pumping Speed | 1 m³/h (16.0 L/min) |
| Dimensions (W×D×H) | 195×235×145 mm |
| Weight | 6.5 kg |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Model | MPC301Z |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum (abs.) | < 8 mbar |
| Pumping Speed | 2.3 m³/h (38.0 L/min) |
| Dimensions (W×D×H) | 230 × 265 × 169 mm |
| Weight | 11.2 kg |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Model | MPC601T |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum (Absolute) | <2 mbar |
| Pumping Speed | 4.5 m³/h (75 L/min) at 50 Hz |
| External Dimensions | 230 × 380 × 169 mm |
| Weight | 32.8 kg |
| Power Supply | 220 V, 50/60 Hz |
| Exhaust Port | DN16 KF Flange |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Model | MPC901Z |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum (Absolute) | < 8 mbar |
| Pumping Speed (50 Hz) | 6.8 m³/h (113 L/min) |
| Exhaust Port Connection | 8 mm OD |
| Dimensions (W × D × H) | 230 × 380 × 169 mm |
| Weight | 32.8 kg |
| Motor Power | 100 W |
| Compliance | CE, RoHS, ISO 9001-certified manufacturing |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Model | PK 2 DC |
| Pump Type | Oil-Lubricated Dual-Stage Rotary Vane Pump |
| Ultimate Vacuum (Absolute) | < 1 × 10⁻² mbar |
| Pumping Speed | 1.8 m³/h (30 L/min) |
| Inlet/Outlet Port | DN 16 KF Flange |
| Weight | 8 kg |
| Power Supply | 50/60 Hz AC |
| Brand | Welch-Ilmvac |
|---|---|
| Origin | Germany |
| Model | Ilmvac WOB-L Dry Piston Vacuum Pump |
| Suction Speed | 0.55–10 m³/hr (9.2–168 L/min) |
| Ultimate Vacuum | 6.7–292 mbar |
| Max Positive Pressure | 1×10⁵–3.3×10⁵ Pa (14.5–48 PSIG) |
| Motor Power | 25–250 W |
| Inlet/Outlet Port Size | 5–10 mm |
| Weight | 2.3–11.1 kg |
| Dimensions | 19.4×11.4×19.1–43.2×19.1×30.5 cm |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Model | 2534C-02 |
| Pump Type | Oil-Free Reciprocating Piston Pump |
| Ultimate Vacuum (abs) | 93 mbar |
| Maximum Positive Pressure | 5 × 10⁵ Pa |
| Pumping Speed | 1.7 m³/h (28.0 L/min) |
| Motor Power | 93 W |
| Dimensions (L×W×H) | 206 × 224 × 254 mm |
| Weight | 5.3 kg |
| Exhaust Port Connection | 7 mm OD |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Pump Type | Oil-Free Diaphragm Pump |
| Model | 2546C-02 |
| Suction Rate | 2.3 m³/h (38.0 L/min) |
| Ultimate Vacuum | 80 mbar (abs) |
| Maximum Positive Pressure | 1 × 10⁶ Pa |
| Motor Power | 190 W |
| Dimensions (L×W×H) | 254 × 191 × 229 mm |
| Weight | 6.3 kg |
| Exhaust Port Diameter | 7 mm |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Pump Type | Oil-Free Reciprocating Piston Vacuum Pump |
| Model | 2562C-50 |
| Pumping Speed | 3.4 m³/h (56.7 L/min) |
| Ultimate Vacuum Pressure | 12 mbar (absolute) |
| Motor Power | 250 W |
| Dimensions (L×W×H) | 381 × 254 × 254 mm |
| Weight | 7.5 kg |
| Exhaust Port Diameter | 7 mm |
| Operating Mode | Dry Running |
| Vacuum/Pressure Display | Integrated Analog Gauge |
| Built-in Vacuum Regulator Valve | Yes |
| Buffer Bottle Included | Yes |
| Brand | ILMVAC |
|---|---|
| Origin | Germany |
| Model | 2567C-50 |
| Pump Type | Oil-Free Reciprocating Piston Vacuum Pump |
| Pumping Speed | 4.9 m³/h (82 L/min) |
| Ultimate Vacuum | <80 mbar (abs) |
| Motor Power | 250 W |
| Dimensions (L×W×H) | 381×254×254 mm |
| Weight | 7.5 kg |
| Exhaust Port Diameter | 7 mm |
| Noise Level | ≤52 dB(A) |
| Duty Cycle | Continuous Operation Rated |
| Brand | INNOTEG |
|---|---|
| Model | EasyVac-20 / EasyVac-40 |
| Pump Type | Dual-Stage Diaphragm Vacuum Pump |
| Motor Power | 120 W / 240 W |
| External Dimensions | 315 × 165 × 210 mm / 330 × 170 × 210 mm |
| Weight | 9.4 kg / 10.4 kg |
| Gas Contact Materials | Fully PTFE-Lined (including diaphragm, pump head, valves, and tubing) |
| Noise Level | <70 dB(A) |
| Thermal Protection | Integrated bimetallic temperature switch with auto-reset function |
| Compliance | Designed for GLP-compliant laboratories |
| Origin | Japan |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DVSL-100C |
| Pump Type | Dry Scroll Vacuum Pump |
| Pumping Speed | 100 L/min |
| Ultimate Vacuum Pressure | 50 Pa |
| Motor Power | 0.3 kW |
| Weight | 15 kg |
| Noise Level | 62 dBA |
| Inlet Port | NW 25 (Rc1) |
| Cooling Method | Air-Cooled |
| Ambient Operating Temperature | 5–40 °C |
| Water Vapor Handling Capacity | 100 g/day (250 g/day with Gas Ballast Valve) |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.20 |
| Ultimate Vacuum Pressure | 300 mbar (abs) |
| Maximum Flow Rate | 12 L/min |
| Motor Power | 75 W |
| Noise Level | <50 dB(A) |
| Operating Temperature Range | 7–40 °C |
| Weight | 4 kg |
| Dimensions (L×W×H) | 195 × 98 × 156 mm |
| Inlet Port Diameter | φ6 mm |
| Positive Pressure Output | 0.07 MPa (≈10 psi) |
| Diaphragm Material | Nylon |
| Housing Material | Anodized Aluminum Alloy |
| Ambient Humidity | ≤80% RH (non-condensing) |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.20 |
| Pump Type | Diaphragm Vacuum Pump |
| Oil-Free Design | Yes |
| Ultimate Vacuum | 300 mbar (abs) |
| Pumping Speed | 12 L/min |
| Motor Power | 75 W |
| Dimensions (L×W×H) | 195 × 198 × 156 mm |
| Weight | 4 kg |
| Inlet Port Diameter | Φ6 mm |
| Noise Level | <50 dB(A) |
| Operating Temperature Range | 7–40 °C |
| Diaphragm Material | Nitrile Rubber (NBR) |
| Pump Head Material | Nylon 66 |
| Max Positive Pressure Output | 30 psi (207 kPa) |
| Motor Thermal Protection | Integrated |
| Certifications | CE-compliant design, RoHS-conformant |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GM-0.20 |
| Instrument Type | Diaphragm Pump |
| Product Type | Oil-Free Vacuum Pump |
| Ultimate Vacuum | 300 mbar (abs) |
| Pumping Speed | 12 L/min |
| Maximum Positive Pressure | 0.07 MPa (gauge) |
| Motor Power | 75 W |
| Noise Level | <50 dB(A) |
| Inlet Port Diameter | φ6 mm |
| Operating Temperature Range | 7–40 °C |
| Pump Head Material | Nylon |
| Housing Material | Aluminum Alloy with Corrosion-Resistant Coating |
| Dimensions (L×W×H) | 195 × 98 × 156 mm |
| Weight | 4 kg |
| Pump Body Operating Temperature | <55 °C |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | 50–200 mbar (depending on model) |
| Flow Rate | 20–30 L/min |
| Motor Power | Not specified |
| Dimensions (L×W×H) | 450 × 200 × 300 mm |
| Weight | 10.8 kg |
| Pressure Regulation | Adjustable vacuum/positive pressure output |
| Cooling | Integrated self-cooling exhaust system |
| Membrane Material | Fluoroelastomer (FKM) |
| Mounting | Four suction-cup feet + top carry handle |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Pump Type | Diaphragm Vacuum Pump |
| Product Type | Oil-Free Vacuum Pump |
| Ultimate Vacuum Pressure | ≤ 0.075 MPa (≤ 75 mbar) |
| Pumping Speed | 20 L/min |
| Motor Power | 160 W |
| Noise Level | < 50 dB(A) |
| Weight | 7.5 kg |
| Dimensions (L×W×H) | 215 × 120 × 235 mm |
| Inlet/Outlet Port Diameter | φ6 mm |
| Operating Temperature Range | 7–40 °C |
| Diaphragm Material | Fluoroelastomer (FKM) |
| Pump Housing | PTFE-Coated |
| Cooling | Self-Cooling Air Exhaust System |
| Pressure Regulation | Adjustable Vacuum Output |
| Compliance | Designed for GLP-compliant laboratory environments |
| Origin | Shanghai, China |
|---|---|
| Type | Oil-Free Diaphragm Vacuum Pump |
| Model | GM-0.33A |
| Ultimate Vacuum | ≤0.08 MPa (200 mbar) |
| Flow Rate | 20 L/min |
| Noise Level | <55 dB(A) |
| Motor Power | 160 W |
| Inlet/Outlet Port | Ø6 mm |
| Dimensions (L×W×H) | 235×120×215 mm |
| Weight | 7.5 kg |
| Operating Temperature Range | 7–40 °C |
| Construction | Anodized Aluminum Housing with Corrosion-Resistant Coating |
| Pressure Mode | Negative Pressure Only (Vacuum-Only Operation) |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.33A |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | 200 mbar |
| Flow Rate | 20 L/min |
| Motor Power | 60 W |
| Dimensions (L×W×H) | 235 × 120 × 215 mm |
| Weight | 7.5 kg |
| Inlet/Outlet Port Diameter | Ø6 mm |
| Operating Temperature Range | 7–40 °C |
| Maximum Pump Surface Temperature | <60 °C |
| Noise Level | <55 dB(A) |
| Compliance | CE-marked for laboratory use under IEC 61000-6-3 & IEC 61000-6-2 |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.33B (GM-0.33III) |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | ≤ −0.095 MPa (≤ 75 mbar absolute) |
| Air Displacement Rate | 20 L/min |
| Motor Power | 120 W (Single-Phase) |
| Dimensions (W×D×H) | 282 × 130 × 210 mm |
| Weight | 10 kg |
| Operating Temperature Range | 7–40 °C |
| Max. Surface Temperature | < 55 °C |
| Noise Level | < 50 dB(A) |
| Inlet Port Diameter | φ6 mm |
| Dual-Head Configuration | Positive/Negative Pressure Capable |
| Brand | JINTENG |
|---|---|
| Origin | Tianjin, China |
| Model | GM-0.33B |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | 50 mbar (abs) |
| Pumping Speed | 20 L/min |
| Motor Power | 160 W |
| Dimensions (L×W×H) | 282 × 130 × 210 mm |
| Weight | 10 kg |
| Operating Temperature Range | 7–40 °C |
| Maximum Case Temperature | <55 °C |
| Noise Level | <50 dB(A) |
| Inlet Port Diameter | Ø6 mm |
| Construction | Aluminum Alloy Housing with Epoxy-Polyester Coating & PTFE-Coated Diaphragm Chamber |